The grass is wrapped around the trimmer head

CHAMPION T433-2

The household petrol trimmer is equipped with a 43 cm³ engine with 1.7 hp output. The two-stroke power unit spins the tooling up to 6500 rpm, which contributes to high performance. The trimmer works both with fishing line up to 3 mm in diameter and with knives. The mowing width reaches 40 cm at a time. The straight metal bar is complemented by a U-shaped handlebar with thick handles that perfectly dampen vibration. The mower is easy to operate on level and bumpy ground. If it is necessary to abruptly put down the gardening tools, the engine brake immediately stops the rotation of the spool. The model weighs 8.3 kg and is equipped with a shoulder strap for comfortable carrying. To care for a plot of 12 acres, you will need about 3 liters of gasoline, which is economical for such power. Of the minuses, the owners distinguish the increased noise level of the unit and the small amount of lubricant in the gearbox. It is better to immediately disassemble the knot and add solid oil. But affordable cost and improved performance make up for these disadvantages..

disadvantages

  • noisiness;
  • inconvenient to transport.

disadvantages

  • noisy work;
  • uncomfortable shoulder strap.

disadvantages

  • the air filter mounting bolt is unscrewed;
  • fragile coil.

Oleo-Mac Sparta 25

The Oleo-Mac Sparta 25 household trimmer has won a good reputation among Russian summer residents. Experts believe that the best option is to use the Italian model on a plot of up to 20 acres. The manufacturer has equipped its equipment with an economical 2-stroke 1.0 liter engine. with., thanks to which you can easily mow fresh grass and rough weeds. The swath is about 40 cm wide and comes with a 2.4 mm line and a knife. The lawn mower is equipped with a safety clutch and anti-vibration system.

Dignity

  • 4-stroke motor;
  • easy start;
  • high power;
  • good unloading.

Dignity

  • good balancing;
  • ease;
  • low noise and vibration;
  • easy start.

Husqvarna 545RX

The Husqvarna 545RX professional trimmer features a sturdy design and a rigid 32 mm diameter boom. The transmission of torque from the motor to the cutting head is provided by a 9 mm shaft. Experts note the easy start of the engine, it is possible to start it even on weight. The purity of the air entering the combustion chamber is ensured by a filtration system with centrifugal pre-treatment. the lawn mower picks up well from the bottom, high torque is given by a revolving (9000 rpm) engine with a capacity of 2.8 liters. from. Good maneuverability and complete equipment should be included in the asset of the model. Trimmer wins gold in our review.

The Russian owners liked the Swedish lawn mower for its reliability, durability, and high performance. Among the shortcomings, the high price of the brand model is noted..

Trimmer head: types and description

One of the common devices for cutting grass is the trimmer. It is very easy to operate and maintain. That is why it has become popular among the population. Its significant advantage is its low weight. Even a child can handle such equipment..

Cutting tool

To make the cutting process easy, you need to choose the right cutting element..

What it is?

The trimmer consists of a cutting element, a bar, a motor and a handle with a control mechanism.

grass, trimmer, head

Trimmer mowing head

It is a special assembled coil with a cord inside.

The trimmer head is classified according to the line feed method:

  • Manual. In this case, the name speaks for itself, that is, the line is fed mechanically. To make the cord even longer, you must stop the trimmer and manually pull the ends.
  • Semi-automatic. If you want to replace the cord, the trimmer head needs to touch the ground. At the same time, a special button is pressed and the anchor mechanism opens. Further, the lengthening of the cord occurs due to the centrifugal force. The main feature is that the procedure takes place when the trimmer is on..
  • Automatic. To make the cord elongate, the engine speed is reduced. Further, when increasing them, the line is fed automatically.

From the foregoing, it follows that the manual mowing head for the trimmer is inconvenient..

How to choose the right one?

Before purchasing this equipment, you need to understand for what purpose it will be used. For a large area with a flat lawn, it is better to purchase a light model with low power. If you need to equip a summer cottage, then you need to choose a more powerful model.

Specifications

The main technical characteristics of the trimmer are:

  • power;
  • equipment weight;
  • type of power supply (from the network or using a battery);
  • engine location (top or bottom);
  • type of cutting element;
  • rod type.

All this must be taken into account, buy this or that device.

Echo SRM420TESU Brush Cutter Review, Grass Wrapping Around Gear Head

Classification by filling method

The trimmer head can have several ways of threading the line:

  • Quick Chargers. The new cord is wound without disassembling the coil, that is, there is no need to remove it from the device. The end of the new element is pushed into the spool and then wound a certain number of times. When a specific value is reached, the cord is cut. This type of trimmer head is available from Shindaiwa and Speed-Freed..
  • Collapsible. Here the name itself speaks for itself. To replace a new cord, you need to remove the spool from the equipment, then unwind the old line and wind a new one..

Pruning

It is convenient to trim flower beds, lawns and paths along the edges with a trimmer with a lower engine, since its cutting plane can be placed vertically. For an even greater effect on the cutting line, it is useful to dig a groove of about 4×4 cm. Then the line will cut the grass below ground level without touching its surface. The result is a very clean, blemish-free vertical haircut..

Working in wet weather

If there is a need to mow with a trimmer in any weather, then it definitely must be gasoline, since it tolerates wet weather well. Although, according to the instructions, work in the rain or on wet grass is also prohibited by some manufacturers of such gasoline equipment. When choosing a trimmer, this is also worth paying attention to..

The electric motor is the most vulnerable place to moisture with cordless trimmers. Accordingly, if it is located on top, then there is less chance of moisture getting there from the grass, but in rainy weather they cannot work either..

Most moisture sensitive AC powered trimmers.

The Problem and Prevention of Grass Wrapping Around Brush Cutter Gear Head

Typically, water from wet grass enters the connectors of the extension cord, where an electric arc can occur that can ignite the insulating plastic or cause a short circuit. Such a defect is “corrected” by buying a new extension cord or replacing the plug, but moisture ingress on the engine or control circuit leads to irreversible failure of the trimmer. In addition, it is simply dangerous to work with such a tool in the rain, since there is a high probability of electric shock..

Smooth lawn

If the site is large and level, and the grass is soft enough, then it is more convenient to mow along imaginary squares, mentally breaking the entire area into them. Having previously mowed the grass along the perimeter of the first, they continue to work along a tapering square spiral clockwise until the site is completely mowed. Then proceed to the next square. With this method, the cut grass always remains on the treated surface on the left side. In order to mow vegetation to the very root, it is necessary to keep the cutting plane at an angle of 30 °, with the tip of the fishing line almost touching the ground.

Of course, it is better to mow flat lawns with a trolley lawnmower, which allows you to make a smoother cut and collects the cut grass in a special grass catcher. The choice of such a lawn mower is described in this article..

High grass

In this case, it is more convenient to mow in both directions. The first pass is from left to right, cutting off the tops of the grass, and then, lowering the tool to the desired level, the lower part is cut in reverse motion. The cut grass also remains on the treated surface on the left side. If the thickets of weeds are too high, then in order to reduce the likelihood of winding the grass on the drum, you have to mow several times from top to bottom, but this is fraught with increased fishing line consumption.

Grass trimmer: why and how to use it correctly

Working with a trimmer is quite simple – easier than with an ordinary scythe. But everywhere has its own specifics, therefore, before mastering a new technique, you should do what many leave for later – carefully read the instructions. This is already enough to roughly understand how to use the trimmer, fill it with fuel, figure out how to charge its battery or connect it to the mains.

We start with safety

Of the protective devices, the glasses and gloves recommended by the instructions do not interfere at all, but the most important is the protection of the legs. The cutting tool, especially when mowing with a gasoline trimmer with metal knives, rotating at huge revs, picks up debris, pebbles and cuttings of vegetation, scattering at such a speed that they can injure a person. Therefore, it is advisable to work in trousers and closed shoes or boots..

What happens if you don’t protect your legs

As for ear protection, there is a tangible need for this only for the “loudest” petrol trimmer – based on a two-stroke engine. They are usually equipped with special headband headphones to reduce the sound pressure on the eardrum..

Country notes

DIY garden and vegetable garden

How to wind the line onto the trimmer spool

The line in the trimmer head can run out at the most inopportune moment when the work is in full swing. So that the replacement of the fishing line does not take much time and does not have to go through the instructions for a long time, we recommend that you theoretically familiarize yourself with this process in advance. From our article you will learn all the subtleties, starting with the choice of consumables and ending with winding on spools of different types..

What do you need?

  • What do you need?
  • Line replacement process
  • Video
  • Useful articles

Line replacement process

Line selection

For each trimmer, the manufacturer recommends a fishing line or cord of a certain diameter – a reel is made for it. It can be from 1.2 to 4 mm: you need to look at the instructions for what line sizes are acceptable for your tool. For example, many trimmers have a maximum value of 3 mm (recommended for tough grass) – a thicker cord cannot be fitted. For cutting young, soft vegetation, a thin line with a diameter of 1.2 – 1.6 mm is suitable. Also, when choosing, pay attention to the structure of the cord: round is the most durable and suitable for coarse grass, curly – for soft, twisted or notched – for thin stems. Depending on what kind of grass grows on the site – lawn or weed, buy the appropriate consumable. The length of the winding can be from several tens to several hundred meters, and its price depends on this. You need to proceed from the amount of work to be done. If the trimmer is used in a private household, there is no need to buy a roll over 100 m.

It is important to know! Buy only branded line recommended by the trimmer manufacturer. It is made of high-quality materials and is durable – it will cut the grass perfectly and not wear out so quickly.

For one threading of the line into the bobbin, a length of 2 to 4 m is required – it all depends on its thickness and the manufacturer’s recommendations. If you wind more, the movement of the line will be difficult, and in the process of work, you may have problems pulling out new ends. Unwind the required amount and cut with a knife.

Helpful Hint: Place a piece of cord in water for 30 minutes, then it will become more elastic and stronger.

Removing the spool from the spit

To insert the line into the trimmer head, you must remove it from the tool. Depending on the design, this can be done by pressing the latches or unwinding the lamb. Pay attention to the direction of the thread – right or left – and rotate the wing depending on this. Usually the direction of rotation is indicated by an arrow on the trimmer head housing. It is recommended to carry out this operation with gloves – fingers will not slip, and hands will not get dirty..

Dismantling the mowing head

The line is wound on a spool, which is hidden in the trimmer head housing. To get to it, you need to disassemble the element. On the case there are latches-latches, when you press them, the case cover can be easily removed. Sometimes disassembly is carried out by untwisting the case..

Be careful! Remember in what order the elements are installed, how the spring and the fixing screw are located inside the head. Stack all the parts neatly in one place so that nothing gets lost and there are no problems during assembly.

Line winding

Trimmer heads differ in structure, reel type and line pulling principle. Having disassembled the case, you will see the spool and determine what type it belongs to. There are products with a middle edge that divides the reel into a top and bottom for each end of the line. In products without it, the line winding is solid. To make the process clearer, we suggest using the table.

Winding line on reels of different types

With dividing edge

Without dividing board

We have described how to wind the line into the reel of a double-barbed trimmer. This is the most common option. But there are other ways as well. For example, if there is one antenna in the mowing head, then winding is carried out without folding the line. Rotate in the direction indicated on the bobbin body, and the free end of the cord is temporarily fixed in the slot on the body. For trimmers with four antennae, four short sections are consumable, which are inserted in turn into the holes of an already assembled head.

Helpful hint: when winding the line, be careful not to pull it tight, so that it does not sit very tightly in the reel. It is necessary to ensure its free movement for subsequent pulling..

Assembling the trimmer head

After the line is wound on the spool, it is necessary to assemble the body. Position the spool so that the ends of the line can be pulled into the trimmer head outlets. The slots in the spool where they were temporarily inserted will prevent them from slipping out. If there are no such slots, support the ends with your fingers as you insert the coil into the body. After pulling the free ends into the outlet openings, close the lid and secure it with latches or twist. Place the mowing head on the trimmer and pull out the ends of the line to the required length so that they do not touch the protective cover during operation. Done! You can get to work!

Principle of operation

The principle of the tool is simple. The motor transfers the torque to the blades. Those, rotating at high speed, cut hairs caught in the cut between the working head and the attachment.

At the same time, machines with which you shave off your beard or trim your hair can run on different engines..

How to make the right choice

Since the beard requires daily grooming, purchasing a trimmer is a must. For a device to work for a long time, it needs to be of high quality and be easy to use. Therefore, before making a purchase, take a look at the following:

  • Examine carefully all the components of the instrument, especially pay attention to what material they are made of.
  • Check how many attachments are included. Look at their sizes. If you wear a mustache, you will definitely need a small attachment. She will also help you cut hairs in hard-to-reach areas of the face. Sometimes their size and configuration allows even eyebrows to be shaved..
  • Take the trimmer in your hand and test it for comfort. If the use turns out to be uncomfortable, you risk ruining your beard. If the device has slippery handles, it can even be dangerous, as it can cut yourself. This is especially important if you are just trying to learn how to shave your beard with a trimmer..
  • If you intend to use the device not only at home, but also on trips, choose a model that runs on batteries.

Correction of facial hair with a trimmer will take a little time, but on the condition that you choose the device that is convenient for you. You shouldn’t buy a professional expensive device, because it has too much unnecessary functionality. However, it is also undesirable to use a device that is too cheap, since it will be made of poor quality materials. Such a tool will not work properly for a very long time..

Bikini area

Use a body trimmer, especially in the bikini area, with extreme caution. in these places, the skin is particularly tender and requires a delicate attitude. Devices for the body are considered to be female – most are capable of working in the “wet shave” mode, be combined, but do not belong to universal trimmers with attachments.

For comfortable use:

  • Apply shaving foam or cream to skin to soften skin.
  • The device is guided against hair growth, and the skin is pulled slightly with the free hand, which helps to lift the hairs.
  • When using for the first time, set low speeds to determine the comfort mode.
  • After the end of the procedure, to avoid irritation and itching, treat the skin with a soothing and emollient cream or lotion..

By learning how to use the trimmer correctly, you will save yourself the trouble of going to hairdressers, and you will always look well-groomed and neat. The device is gaining more and more popularity and overshadows shaving razors, thanks to its capabilities, protection systems and ease of use..

We recommend choosing models with titanium blades, combined power supply (battery / mains), minimum pitch, and a large number of length adjustments. Of the additional options, nozzles, a vacuum cleaning function and the ability to wash the device under water will become a big plus.

General operating principles of the grass trimmer

As a rule, the cutting tool rotates counterclockwise, so you can work with the trimmer in the same way as with an oblique molding, making 1-2 strokes from right to left with a gradual advance of 15-30 cm. Then the cut grass remains on the treated surface on the left. Since the line cuts best with the tip, the swing speed and grip are empirically selected. With fast wiring, the cut occurs with the entire length of the cutting tool, in this case the motor is unnecessarily overloaded, and the grass is more often wound around the head.

Eyebrows

The eyebrow trimmer is visually similar to a wide fountain pen with flat blades that can shave not only eyebrows, but also contour sideburns, trim hair and remove body hair. The eyebrow model is easy to use, the main thing is clear and smooth hand movements.

The first time you use it, try it on any part of the body, evaluate its performance, adjust to the handle, and only then start trimming your eyebrows. Observe safety precautions – do not bring blades close to eyes and eyelashes.

To get the perfect brow shape:

  • Carefully comb the brow hairs up towards the forehead.
  • Remove all sticky and long hairs all over the brow with a trimmer with attachment.
  • Remove the attachment and create the desired brow contour by working under and above the hairline..

For a clear shape, you can use a cosmetic pencil and draw a mowing line. This will help avoid shaving off excess hairs and choose the shape – the pencil can be washed off and redrawn, and with a trimmer, the process is irreversible.

What is a beard correction for?

Each stylist can give advice on how to trim the beard correctly. To trim the facial hair beautifully, you first need to grow it to the desired length. Typically, this takes from one to two months, and it depends on the specific organism. As soon as the hairs are of medium length, you can proceed with the correction..

Some men use machines or scissors for this purpose, but these are outdated accessories. Today, a trimmer is a relevant and convenient tool for this purpose. It is inexpensive and available for sale everywhere. To shave with a trimmer helps to get the desired result, you should learn how to use it..

Trimmer storage and care

Petrol trimmers require extra care. In addition to cleaning and lubricating cutting and rubbing surfaces from plant sap and dirt, it is also necessary to take care of the engine. The fastest way to get clogged is the air filter. Its cleaning frequency is about 10 hours. In addition, sometimes the fins of the engine cooling radiator become dirty, which is why it quickly overheats, and this can lead to its jamming. How to clean the radiator and air filter is described in the instructions for a specific gas trimmer.

Before leaving the trimmer for long-term storage at the end of the season, drain all fuel from the trimmer, then start the engine and wait until it stops. This ensures that there is no fuel in the reservoir and carburetor. After the engine has cooled down, unscrew the spark plug, pour 30–40 ml of two-stroke oil into the cylinder, slowly crank the crankshaft using the starter cable so that it is distributed over all cavities inside the engine, then screw the spark plug back into place. After that, you need to disassemble the bar, if it is disassembled, cover with a preservative grease all metal parts that can rust and then store the trimmer in a place protected from moisture.

After finishing work, it is necessary to wipe and roll up the wires and extension cords for electric trimmers, and put the battery on charge for rechargeable trimmers, since it is not recommended to store the trimmer even for a very short time with a discharged battery – this leads to a quick failure. After that, you should remove the head, since you will have to clean both the protective casing and the insides of the drum itself. If this is not done, the herbal juice may dry out on them and cause the line reel to stop functioning normally the next time it is started..

It is much easier to prepare electric trimmers for long-term storage. The main thing is to protect them from moisture penetration into the control circuit and the engine, as well as from rust on unprotected metal elements with the help of a preservative lubricant. It is imperative to charge the battery before storing, then your trimmer will be as good as new in the spring.

Classification of devices

Many models of different classes are produced: home, universal and professional. They differ in the installed motor, operating time, convenience and scope of application. Some devices are used to care only for the beard and mustache, with the help of others, you can trim the hairstyle.

grass, trimmer, head