Trimmer Attachment For Outboard Motor • CIMFLOK.COM

Should you buy a trimmer attachment for a boat motor

It is impossible to give an unambiguous answer to this question, since someone is very accustomed to motors on boats, while others have never used them. At the same time, if you want a really powerful boat for yourself, then naturally the most profitable and effective solution would be to install a standard trimmer. But it should be borne in mind that this option is universal. As mentioned above, the most important thing is to correctly combine.

Many experts recommend blades similar to those of your old motor. It is very important that you install it in strict accordance with the instructions.

In addition, you should pay attention to the moment that you definitely need to take additional fuel with you, and just like an ordinary lawn mower, you should be given the opportunity to "rest" because, due to very long use, the trimmer motor may simply fail directly on the water.

The larger the blades, the more effective the trimmer itself will be.

Alteration of lawn mowers is as follows:

Initially, the main bent shaft is being altered: first, a standard nut is removed from the reel with a special fishing line. It is a small tube with a length of 20 mm.

At the same time, the nut must be preserved, since the thread on lawn mowers is extraordinary and it is almost impossible to find the same.

Then the plastic cover with the keys is removed. After that, at the very end of the bent pipe itself, there is a standard bronze bushing (often called a sleeve bearing), it must be carefully cut out, after that you need to remove the stern shaft, unscrew the nut and the metal shaft.

The most important thing is to choose the right blades. Everything here directly depends on what dimensions your boat has.

Here it is very important to pay attention to the factor that the best solution would be to enter “motors for a boat” in the search and on the first site you come across go to the site where motors are sold and ask a question to a consultant who will offer you his help, you say the dimensions of your own car , and then, when you get a suitable motor, you need to look at the specifications and find out the dimensions of the blades.

Principle of operation

The trimmer has a faster blade speed, which allows you to move through the water at a higher speed, which will allow you to start fishing faster than with a motor. Everyone saw how the trimmer works how it cuts the lawn and ordinary grass, but here, its blades are turned in the other direction and at the same time, it performs the function of the most economical motor.

But if the trim is lower, the speed will be lower. But the biggest disadvantage of the trimmer compared to ordinary outboard motors is that they are very loud and should not be used to their fullest if you do not want to scare the fish away.

Principle of operation

When considering a trimmer, attention should be paid to the fact that such a mechanism provides a high speed of rotation of the blades. This ensures a high speed of movement of the boat through the water.

The features of the principle of operation include the following points:

The blades are turned outward.
The installed motor in the upper part transmits the rotation of the blades.
To increase reliability, the shaft that connects the motor to the blades is located in a protective tube.

How to make your own boat motor from a trimmer?

For the movement of a motor boat, a light outboard motor is often installed. It should be borne in mind that such a mechanism is quite expensive and difficult to maintain.

Small boats are often equipped with motor trimmers. Today they are very popular; for equipment, a special attachment is purchased. Let’s consider its features in more detail.

What is outboard motor trimmer attachment?

Light boat motors are often made from trim tabs.

The main ones are the following:

A clamp for the installation of a homemade structure with a trimmer on a prepared boat transom has become widespread. This option is considered more affordable, but it is characterized by increased efficiency in use. The special design allows the device to be used as a propeller. When performing the usual function of the motor, the mechanism is small, easy to install and remove, which determines its very widespread use.
Propeller screw. This version is a little more complicated than the previous one, but there are already ready-made mechanisms on the market, characterized by increased efficiency in use. It is not recommended to carry out the most powerful version of the design, since due to the resulting thrust, a light PVC boat can simply turn over. Often, the scope of delivery includes a special drive made using corrosion-resistant steel, as well as some adapters that make the trimmer almost a universal outboard motor.
Another common option is converting a standard mower into a motor used to generate traction. In this case, it is recommended to give preference to common trimmers that require gasoline to operate. The relatively low weight of 4.5 kg is a significant advantage of this version.

How to make a boat motor from a garden trimmer with your own hands

Many people are wondering if it is possible to convert a rubber boat into a motor boat. To do this, you need to mount a boat motor from a trimmer on it.

Making a screw

To create a screw, you need a duralumin strip 100 mm long and 30 mm wide. If you put the screw on the table, then the distance from it to the blade should be 10 mm. The angle of inclination of the propeller blades must be adjusted with pliers. Before this, the duralumin is annealed. Propellers with 2 or 3 blades can be made in various sizes. The propeller dimensions should be selected individually.

Advantages and disadvantages of using a trimmer

Let’s take a look at the benefits of using a trimmer:

You don’t have to buy an expensive boat motor.
An ICE made from a trimmer uses less gasoline than a boat engine.
The lawnmower engine is more compact than the stock boat engine.
The engine of the lawn mower has a high strength, body tightness, and a built-in tank.
It has all the components that are needed to control a home-made motor: starter, gas lever, rod, shaft, fuel tank.

Do not forget about the cons of such a rework:

The petrol engine from the trimmer is low-power, and it will be difficult or impossible to sail with it in a boat against the current. For the same reason, he will not cope with a heavy ship.
A motor for a boat made of lawn mowers is suitable for moving on bodies of stagnant water, which may not be suitable for fans of active fishing on the river.
Also, an important disadvantage is the increased noise level of the trimmer motor, and some models can smoke.

Paddle paddle. Outboard motor GRUNFELD 62AOB1: comfortable fishing in modern conditions

Ease of movement in strong currents is a guarantee of successful fishing. But what if your boat’s engine fails? Of course, use a modern and stylish device called a nozzle. Outboard motor GRUNFELD 62AOB1. This state-of-the-art, versatile device can be installed on a variety of bases such as a cultivator, petrol trimmer, lawn mower and lawn mower. This model is optimal for installation on small plastic and inflatable boats. The nozzle has a powerful metal screw 190 mm in diameter. The control handle allows you to easily control the processes of starting and stopping the engine. This is an unconditional advantage over models like the Bumblebee, where the stop button is inconveniently located on the body of the engine itself. Installing the nozzle in place of the upper gearbox allows you to ensure comfortable fishing.

What is outboard motor trimmer attachment?

The idea of a very light outboard motor for small boats, including the simplest rubber ones, is of interest to many hunters and fishermen today. It is important to note that the cost of such a motor is quite high and maintenance, as well as the parts. In this case, many people very often began to use motor trimmers, which are now very popular and widespread.