What is better than a chainsaw or a saw compare

Mobility and portability

The main advantage of the chainsaw is portability, it does not depend on electricity, it can be used anywhere. However, it will take time to prepare it for work, since you first need to dilute the fuel mixture. You can work with a chainsaw in all weather conditions, but at low temperatures it can be difficult to start.

The main advantage of the saw is the ease of working with it. However, in some cases, such as high humidity and rain, it is not recommended to use it. The electric saw can be used indoors and, unlike a chainsaw, does not emit exhaust gases.
The big drawback of the saw is its dependence on the availability of electricity. If you intend to use it for outdoor work, you will have to take care of the extension cord..

Power and scope

saws belong to household tools, they are compact, their weight, as a rule, is less than the weight of any chainsaw. If we compare power, then according to this criterion, household electric and chainsaws are practically the same. But semi-professional and professional chainsaws are an order of magnitude more powerful than any electric model..

The chainsaw is indispensable when carrying out work on the construction of a house, and professional models of saws can even be used for working with frozen wood..

For working with dense wood, it is best to choose a chainsaw, and for small construction work, an electric model is suitable, with which you can even cut even thin boards.

When working with an electric stove, it is recommended to take a break every 20-30 minutes to allow the engine to cool down.

Chainsaw or saw: which is better to choose for construction?

better, chainsaw, compare
  • Chainsaw or saw: which is better to choose for construction?
  • How to choose a chainsaw
  • How to choose a chain saw

Features of care and maintenance

Working with any tool requires certain skills and knowledge. To understand the peculiarities of caring for an instrument, you need to know its structure and principle of operation. Then, during operation, you can avoid unpleasant situations, including injuries..

The care of your specific instrument is described in the instruction manual. But there are also common points. The choice of chain and bar depends on the saw model and the job being done. For gasoline and saws, you need to choose a special lubricating oil for the chain, and for chainsaws, you need to additionally purchase gasoline (usually AI-92) and engine oil (usually two-stroke semi-synthetic or mineral) to prepare the fuel mixture.

Chainsaw operations tend to be more expensive.

Thus, having evaluated the main characteristics of various saw models, we can conclude that the choice of a saw depends on the type of planned work and the conditions for their implementation..

What parameters should you pay attention to when choosing a chainsaw?

Power. For small jobs – cutting branches and small trees – a chainsaw with a power of 1.5 kW is suitable. For example, this CHAMPION 237 chainsaw. If you need to cut thicker logs, pay attention to saws with a capacity of 1.8 kW.

Engine volume. The more this indicator is, the more power the chainsaw has. However, you should not chase the volume, because with an increase in volume, the number of necessary consumables also increases..

Bus length. The longer the bar, the greater the saw potential. For everyday tasks, a tire of 30-35 cm is enough, for logging and construction needs – at least 40 cm.

The weight. The lightest devices weigh 5 kg. The most powerful ones are up to 8 kg. Take this into account when choosing a weight that is comfortable for yourself..

Noise level. Usually it reaches 110 dB, so it is better to purchase ear muffs.

Accessories. Most requested features. safety brake, extra long boom and exhaust gas purging system.

Which Chainsaw Chain Brand is Best? Let’s find out! Stihl vs Oregon, Husqvarna, Carlton, Forester

 

Features for choosing an electric saw

Power. The weakest saws are from 1.2 kW. For professional, you need at least 1.8 kW.

Bus length. Same as gasoline saws.

The weight. Electric saws are lighter than gasoline saws. The lightest models weigh 4 kg.

Noise level. Even the loudest models reach less than 100 dB. You can work without headphones.

Accessories. Most requested features. chain sharpener and start button lock.

But regardless of which saw you decide to buy, the models that we selected in Maxidom will become real “magic wands” for you!

The main difference between a chainsaw and a saw

The principles of operation are similar, mainly power supplies differ.

The chainsaw works by burning a fuel mixture.

saw from the mains.

If you plan to use the tools in the forest, in an open area or in a facility where electricity has not yet been supplied, there are no alternatives to a chainsaw. If a saw is needed for a summer residence, an electric model is also suitable..

Chainsaw or saw: which is better and how to choose?

The hand saw only performs minimal functions. That is why, when completing a set of tools for a rack or use in the country, the question arises: which is better, a chainsaw or a saw. Both tools have merit. Therefore, when selecting them, it is worth deciding which criteria are more important to you. We’ll talk about this below, but first, let’s find out how these types of tools differ..

Comparison of characteristics

Parameter name Description
Mobility According to this characteristic, the chainsaw is ahead of the electric one. Since it does not depend on electricity, you can take it with you to the forest, hunting or fishing. The main thing is to stock up on the fuel mixture. Even in domestic conditions, the saw is less mobile, because its cord can make it difficult to use. In addition, the electric model cannot be used during a power outage, as well as in wet weather..
Power If we compare household models, then electric and gasoline models are approximately the same in power. However, professional gasoline saws are more powerful than any electric saw. They can cut even frozen wood.
Duration of work Chainsaws last much longer – up to 8 hours. In the instructions for the saws, it is recommended not to exceed 20 minutes of use..
Working conditions The chainsaw can be used in almost any environment. Only frost can become a serious obstacle to work. Saws are more complicated: they cannot be used in the rain or in wet weather. But they are indispensable when working indoors, since they do not emit harmful exhaust gases, they emit a minimum of vibration and noise..
The cost It is cheaper to buy and maintain a saw than an electric one. Electric models are 2 times cheaper than petrol models of the same power. In addition, there is no need to purchase gasoline and engine oil for electric saws. Of course, you also have to pay for electricity, but it is always cheaper than gasoline. Electric saws also have fewer components and spare parts than gasoline saws.

Velvet bells will give you coziness: everything about gloxinia

Home Craftsman’s Arsenal: A Hand Tool That Must Be.

Choosing a coolant for the heating system of a country house

Chainsaw or Saw? What’s better?

Chainsaw or Saw? What’s better?

Every professional builder should take the process of choosing a saw responsibly. The same rule applies to amateur craftsmen. But people are faced with an important question. Which is better: a chainsaw or a saw? Let’s try to understand this issue in more detail..

Chainsaw: tool features

This chain saw is in demand among people. It works thanks to the presence of an internal combustion engine in the structure, which is connected to a chain. A simple mechanism of a classic look has an increased level of reliability.

The chainsaw is presented on the modern market in several main types:

  • household tools. Chainsaws of this type are suitable for occasional use. The gasoline tool is lightweight and small in size. Most often, a chainsaw is used to prepare a small amount of wood for kindling the stove. The basic capabilities of a gasoline saw are limited, since it is recommended to use it no more than two hours a day;
  • professional chainsaw – this tool is suitable for felling trees. A chainsaw of this type is quite powerful and multifunctional. You can use it up to 16 hours a day without interruption.

Such a chain tool has the following advantages:

  • the chainsaw does not require connection to a power source;
  • such a chain saw is suitable for use in different conditions;
  • professional chainsaws are powerful enough, so they can compete with electric options;
  • a gasoline chain saw can work for a long time without interruption;
  • gasoline tools have a high level of reliability and long service life.

Among the disadvantages of such saws are the following points:

  • a gasoline tool during operation is harmful to human health, since it emits exhaust gases;
  • professional chainsaws make loud noises during operation;
  • a gasoline chain tool creates vibrations that make the work process more difficult;
  • gasoline saws will have to be filled with gasoline, which is fraught with additional waste.

It is also worth remembering that starting a gasoline engine in subzero temperatures is quite problematic..

Features of saw operation

The modern saw combines the basic functions of a chainsaw with the advantages of electric tools. The chain rotates by means of a gearbox which is connected to the motor. Modern saws are supplemented with automatic-type saw head lubrication. The electric saw motor is protected from overheating by a special relay, which will allow you to work in intensive mode.

A professional saw has the most important parameter – the power level of the electric motor. It is on him that you need to pay attention to when choosing a saw. The higher the power level, the more productive the tool itself will be..

The main advantages of the saw, which directly affect the choice of people, are as follows:

  • the saw weighs a little, and its dimensions are very compact, which facilitates the process of performing work;
  • the saw does not emit gases harmful to human health and nature into the air;
  • it is very easy to use the saw;
  • the cost of the tool is affordable;
  • during operation, the electric motor emits a minimum of noise, so the saw will not cause your discomfort;
  • the saw is easy to start, which will allow you to avoid problems in the process of starting it;
  • modern saws, the choice of which is very wide, practically do not vibrate, so it will be much more convenient for you to use them.

But the saw is not without its weaknesses. The main points include the following points:

  • saws need a power source for stable operation;
  • tools are afraid of precipitation and high levels of humidity;
  • you need to take breaks every 15 minutes so that the saw does not fail;
  • saw service life is low.
Read more:  Which electric saw motor is better

The final choice of a saw depends on the characteristics of the tasks assigned to you and on the frequency of use of the tool. It is necessary to carefully read all the above features of chainsaws and saws, so as not to make a mistake. Only in this case, you will quickly cope with any work without experiencing any particular difficulties.!

Cafe Design

What is better than a chainsaw or a saw: a comparative review of units

The arrangement of a suburban area is impossible without the use of all kinds of tools. The issue of acquiring a saw, necessary for sawing firewood and boards, as well as other woodwork, at some point necessarily arises before the owner of a country house. Which is better than a chainsaw or a saw? Both tools are noteworthy. The only question is which one to choose. Each of the devices has its own advantages and disadvantages..

The power supply is the main distinguishing feature

Since the saw is powered by electricity, the use of this type of tool is possible only in places where it is possible to connect to the mains. It is convenient to work with such a tool at home, during construction. When working with a saw, difficulties may arise when it is necessary to carry out work not only in the immediate vicinity of the house, but also to process the entire area.

For smooth movement with the tool around the site for outdoor work, you will need to purchase an extension cord several tens of meters long

In addition, during active movement, for example, during pruning of fruit trees, it is necessary to ensure that the cord from the power tool does not get tangled under your feet and does not fall under the operating saw chain..

the saw is more intended for construction work: it is convenient for it to cut wood lengthwise and cut thin boards. Saw cuts are even and smooth.

Due to the main feature of chainsaws – mobility, they are an indispensable tool for logging. Easy-to-use tools can be used in virtually any position

The main trump card of the chainsaw is autonomy. The chainsaw will become a handy tool for farming in rural areas, where power surges are not uncommon. Owners who practice outings in order to organize an active holiday: a picnic, expedition, hunting or fishing can always take a handy tool with them in the trunk of their car.

Working conditions and environmental friendliness

Comparing two tools – a chainsaw or a saw, many consumers pay attention to factors such as ease of use, as well as environmental friendliness..

the saws are quite easy to use: the tool is started by pressing one button. Quite lightweight and compact devices will become indispensable helpers for simple work: to cut something nearby at home, cut knots, cut thin logs. But when working with a tree with a denser structure, the saw power may not be enough.

You should also take into account the fact that the power tool can work continuously for only 20 minutes, since its engine heats up very quickly, while chainsaws work successfully without interruption for several hours.

Choosing a saw for work, you should be prepared for the fact that it will be possible to use it only under favorable weather conditions. Excessive moisture can damage the instrument. the saw is an indispensable tool for working indoors: the compact design in operation produces a minimum of vibration and little noise.

the saws are quite easy to use: in the process of work, it is enough to monitor the chain tension and the level of lubricant for this chain. When working with chainsaws, you should also monitor the lubrication of the engine itself..

Chainsaws run on a fuel mixture. The engine of the tool is started by means of a starter cord

For many users who have not experienced the use of chainsaws, the need to prepare a fuel mixture, monitor the quality and quantity of components, is a limiting factor in choosing this type of product. Manipulation of starting and maintaining the instrument is not as difficult as it seems at first glance..

For working in closed rooms, a chainsaw is not the best option: the fumes and exhaust gases emitted during the operation of the tool do not make it possible to spend a long time in an unventilated room

Chainsaws are less picky about weather conditions: light rain and even snow do not interfere with her work. But, at the same time, in severe frost, the chainsaw may not start at all, which cannot be said about the saw.

The financial side of the issue

If we consider the purchase of an electric or chainsaw from a financial point of view, then saws are a more economical option. The cost of saws is an order of magnitude lower than their “gasoline” counterparts.

At the same time, repair of saws in the event of a breakdown is most often carried out in workshops, while maintenance of the gas unit, as well as minor repairs, can be done independently: https://diz-cafe.com/tech/remont-benzopily-svoimi-rukami .html

Electrical appliances are more profitable than gasoline ones due to the fact that they do not need to purchase consumables such as gasoline and oil for the engine. In addition, the saw models are equipped with fewer components and spare parts than gasoline-powered units. Yes, the electricity needed to power the saw will contribute to the cost, but the cost of electricity is always less than the price of gasoline. Although economical models of modern chainsaws can reduce this price difference.

Regardless of what type of tool the owner chooses, the saw will become a real “magic wand”, facilitating the work of improving the site.

What is better than a chainsaw or a saw?

The thesis that a saw is a necessary tool for every owner of a private house or summer resident no longer requires proof. A comfortable and high-quality saw is one of those tools that you should always keep close at hand. It is needed to cut branches in the garden, shape the crown of trees or bushes with a saw, it is indispensable for repair and construction work: installing a frame on the roof, erecting gazebos, verandas, not to mention preparing firewood for a stove, fireplace or even for a barbecue. Since hand saws and hacksaws have long been a thing of the past, the question remains today: Which chain saw to choose, gasoline or electric-?

The main selection criteria:

The main difference between a gasoline and an electric drive is obvious: the gasoline engine works autonomously, and the electric motor is tied to the mains, and the radius of its operation is limited by the length of the power cable. Based on this, even an inexperienced user understands that it is possible to go deeper into the forest in order to cut down a tree only with a chainsaw. An electric saw will also be a useless toy on a construction site where there is no electricity or when cleaning trees in a remote garden area. But all these are extremes, and in the case when there are no problems with electricity, and the proposed work is being carried out near the house, then why not choose a light and low-noise electric saw, which, moreover, does not smoke and does not smell like fumes?

The question of choosing a saw drive always remains relevant, therefore, in order to make the right choice, it is worth determining the range of your needs and capabilities. Try to sort out in your head the main tasks and loads that you plan to perform with the saw. What is the expected rate of use of the tool? Will it be periodic work or daily workload? Will you be able to carry out maintenance in a timely manner? Do you have enough money to constantly refuel your chainsaw with expensive gasoline? And finally – what is the price of a saw that is acceptable for you personally? After answering these questions, the choice of the tool is yours, and we propose to compare the five main parameters of gasoline and electric saws.

Performance

The performance of the saw is determined by the amount of work done in a certain period of time. The performance of a saw is mainly influenced by two factors: the power of its motor and the quality of the cutting attachment. If you are choosing a saw for your garden needs and do not plan to use it every day, then opt for low-power household chainsaws or non-professional grade saws. power up to 2 kW. For a small construction site and other summer cottage works, semi-professional units are suitable – from 2 to 3 kW.

In this case, an important nuance should be taken into account: with the same engine power declared, gasoline engines are much more efficient than electric ones. The gasoline engine has a much higher efficiency, that is, the engine power is almost completely transferred to the cutting part, but the electrical efficiency is much lower. Thus, an electric saw with a power of 2.5 kW will give the same result and effect when working as a gasoline saw with a power of up to 2 kW. In addition, electric saws are mainly equipped with motors up to 2 kW (less often up to 2.5 kW), that is, they are always positioned by the manufacturer as amateur. The lower performance of the saws is compensated by their low weight and ease of use.

But gasoline saws can have a built-in engine of very high power – even up to 6 kW, but this is already a professional type, used mainly for felling. Powerful chainsaws are mostly heavy and oversized, they are difficult to handle, so they are completely unnecessary for a summer resident and an amateur gardener.

If we compare the cutting parts of saws with different types of drives, then chainsaws often have a longer bar. It is convenient to cut thick trees or logs with a dyno tire. it can make a deeper cut, but an electric saw with a short bar runs faster and puts less stress on your hands. If there is a choice between two saws (gasoline and electric) with the same performance, then for small boards and cutting branches it is better to take a saw with a shorter tire. This will increase your cutting speed and make your job easier..

Reliability

An electric motor is always easy, simple and understandable, but a gasoline one is undoubtedly more reliable. The very design of the internal combustion engine is such that its endurance and reliability is higher in all existing parameters. It has high revs, for the manufacture of a gasoline engine, durable and wear-resistant materials are used, which allow you to work with a saw in rain, heat and cold.

Gasoline engines have more advanced cooling and overheating protection systems, there is an air filter, all kinds of fuel and oil level control sensors are built in, so its service life is greatly increased compared to an electric motor of the same power. With proper operation, an internal combustion engine works well for a dozen years, withstanding longer and more complex loads that are beyond the power of an electric motor. That is: to build a bathhouse and sawing thick logs, buy a chainsaw, and for household repair work near the house and inside it or to prepare firewood for a fireplace – an electric one..

It should be borne in mind that all the above evidence is relevant only when comparing saws from well-known brands that have proven themselves in the market for high-quality technology. Therefore, a good German electric saw is a priori more reliable than a cheap Chinese chainsaw..

Economy

With today’s record gasoline price hike, electric and cordless saws will undoubtedly be cheaper to operate because they do not require constant filling of gasoline, oil changes and periodic maintenance or replacement of engine parts. long-term operation The savings are explained by the fact that gasoline engines have an increased service life, that is, they can work for several years without forcing you to buy a new saw.

Read more:  How To Assemble A Stihl Chainsaw Starter

Reliability

An electric motor is always easy, simple and understandable, but a gasoline one is undoubtedly more reliable. The very design of the internal combustion engine is such that its endurance and reliability is higher in all existing parameters. It has high revs, for the manufacture of a gasoline engine, durable and wear-resistant materials are used, which allow you to work with a saw in rain, heat and cold.

Gasoline engines have more advanced cooling and overheating protection systems, there is an air filter, all kinds of fuel and oil level control sensors are built in, so its service life is greatly increased compared to an electric motor of the same power. With proper operation, an internal combustion engine works well for a dozen years, withstanding longer and more complex loads that are beyond the power of an electric motor. That is: to build a bathhouse and sawing thick logs, buy a chainsaw, and for household repair work near the house and inside it or to prepare firewood for a fireplace – an electric one..

It should be borne in mind that all the above evidence is relevant only when comparing saws from well-known brands that have proven themselves in the market for high-quality technology. Therefore, a good German electric saw is a priori more reliable than a cheap Chinese chainsaw..

What is better than a chainsaw or a saw?

The thesis that a saw is a necessary tool for every owner of a private house or summer resident no longer requires proof. A comfortable and high-quality saw is one of those tools that you should always keep close at hand. It is needed to cut branches in the garden, shape the crown of trees or bushes with a saw, it is indispensable for repair and construction work: installing a frame on the roof, erecting gazebos, verandas, not to mention preparing firewood for a stove, fireplace or even for a barbecue. Since hand saws and hacksaws have long been a thing of the past, the question remains today: Which chain saw to choose, gasoline or electric-?

The main selection criteria:

The main difference between a gasoline and an electric drive is obvious: the gasoline engine works autonomously, and the electric motor is tied to the mains, and the radius of its operation is limited by the length of the power cable. Based on this, even an inexperienced user understands that it is possible to go deeper into the forest in order to cut down a tree only with a chainsaw. An electric saw will also be a useless toy on a construction site where there is no electricity or when cleaning trees in a remote garden area. But all these are extremes, and in the case when there are no problems with electricity, and the proposed work is being carried out near the house, then why not choose a light and low-noise electric saw, which, moreover, does not smoke and does not smell like fumes?

Farm Saw vs. Pro Saw! We compare Stihl, Husqvarna and Echo!

 

The question of choosing a saw drive always remains relevant, therefore, in order to make the right choice, it is worth determining the range of your needs and capabilities. Try to sort out in your head the main tasks and loads that you plan to perform with the saw. What is the expected rate of use of the tool? Will it be periodic work or daily workload? Will you be able to carry out maintenance in a timely manner? Do you have enough money to constantly refuel your chainsaw with expensive gasoline? And finally – what is the price of a saw that is acceptable for you personally? After answering these questions, the choice of the tool is yours, and we propose to compare the five main parameters of gasoline and electric saws.

Performance

The performance of the saw is determined by the amount of work done in a certain period of time. The performance of a saw is mainly influenced by two factors: the power of its motor and the quality of the cutting attachment. If you are choosing a saw for your garden needs and do not plan to use it every day, then opt for low-power household chainsaws or non-professional grade saws. power up to 2 kW. For a small construction site and other summer cottage works, semi-professional units are suitable – from 2 to 3 kW.

In this case, an important nuance should be taken into account: with the same engine power declared, gasoline engines are much more efficient than electric ones. The gasoline engine has a much higher efficiency, that is, the engine power is almost completely transferred to the cutting part, but the electrical efficiency is much lower. Thus, an electric saw with a power of 2.5 kW will give the same result and effect when working as a gasoline saw with a power of up to 2 kW. In addition, electric saws are mainly equipped with motors up to 2 kW (less often up to 2.5 kW), that is, they are always positioned by the manufacturer as amateur. The lower performance of the saws is compensated by their low weight and ease of use.

But gasoline saws can have a built-in engine of very high power – even up to 6 kW, but this is already a professional type, used mainly for felling. Powerful chainsaws are mostly heavy and oversized, they are difficult to handle, so they are completely unnecessary for a summer resident and an amateur gardener.

If we compare the cutting parts of saws with different types of drives, then chainsaws often have a longer bar. It is convenient to cut thick trees or logs with a dyno tire. it can make a deeper cut, but an electric saw with a short bar runs faster and puts less stress on your hands. If there is a choice between two saws (gasoline and electric) with the same performance, then for small boards and cutting branches it is better to take a saw with a shorter tire. This will increase your cutting speed and make your job easier..

Economy

With today’s record gasoline price hike, electric and cordless saws will undoubtedly be cheaper to operate because they do not require constant filling of gasoline, oil changes and periodic maintenance or replacement of engine parts. long-term operation The savings are explained by the fact that gasoline engines have an increased service life, that is, they can work for several years without forcing you to buy a new saw.

Performance

The performance of the saw is determined by the amount of work done in a certain period of time. The performance of a saw is mainly influenced by two factors: the power of its motor and the quality of the cutting attachment. If you are choosing a saw for your garden needs and do not plan to use it every day, then opt for low-power household chainsaws or non-professional grade saws. power up to 2 kW. For a small construction site and other summer cottage works, semi-professional units are suitable – from 2 to 3 kW.

In this case, an important nuance should be taken into account: with the same engine power declared, gasoline engines are much more efficient than electric ones. The gasoline engine has a much higher efficiency, that is, the engine power is almost completely transferred to the cutting part, but the electrical efficiency is much lower. Thus, an electric saw with a power of 2.5 kW will give the same result and effect when working as a gasoline saw with a power of up to 2 kW. In addition, electric saws are mainly equipped with motors up to 2 kW (less often up to 2.5 kW), that is, they are always positioned by the manufacturer as amateur. The lower performance of the saws is compensated by their low weight and ease of use.

But gasoline saws can have a built-in engine of very high power – even up to 6 kW, but this is already a professional type, used mainly for felling. Powerful chainsaws are mostly heavy and oversized, they are difficult to handle, so they are completely unnecessary for a summer resident and an amateur gardener.

If we compare the cutting parts of saws with different types of drives, then chainsaws often have a longer bar. It is convenient to cut thick trees or logs with a dyno tire. it can make a deeper cut, but an electric saw with a short bar runs faster and puts less stress on your hands. If there is a choice between two saws (gasoline and electric) with the same performance, then for small boards and cutting branches it is better to take a saw with a shorter tire. This will increase your cutting speed and make your job easier..

What is better than a chainsaw or a saw?

The thesis that a saw is a necessary tool for every owner of a private house or summer resident no longer requires proof. A comfortable and high-quality saw is one of those tools that you should always keep close at hand. It is needed to cut branches in the garden, shape the crown of trees or bushes with a saw, it is indispensable for repair and construction work: installing a frame on the roof, erecting gazebos, verandas, not to mention preparing firewood for a stove, fireplace or even for a barbecue. Since hand saws and hacksaws have long been a thing of the past, the question remains today: Which chain saw to choose, gasoline or electric-?

The main selection criteria:

The main difference between a gasoline and an electric drive is obvious: the gasoline engine works autonomously, and the electric motor is tied to the mains, and the radius of its operation is limited by the length of the power cable. Based on this, even an inexperienced user understands that it is possible to go deeper into the forest in order to cut down a tree only with a chainsaw. An electric saw will also be a useless toy on a construction site where there is no electricity or when cleaning trees in a remote garden area. But all these are extremes, and in the case when there are no problems with electricity, and the proposed work is being carried out near the house, then why not choose a light and low-noise electric saw, which, moreover, does not smoke and does not smell like fumes?

The question of choosing a saw drive always remains relevant, therefore, in order to make the right choice, it is worth determining the range of your needs and capabilities. Try to sort out in your head the main tasks and loads that you plan to perform with the saw. What is the expected rate of use of the tool? Will it be periodic work or daily workload? Will you be able to carry out maintenance in a timely manner? Do you have enough money to constantly refuel your chainsaw with expensive gasoline? And finally – what is the price of a saw that is acceptable for you personally? After answering these questions, the choice of the tool is yours, and we propose to compare the five main parameters of gasoline and electric saws.

Reliability

An electric motor is always easy, simple and understandable, but a gasoline one is undoubtedly more reliable. The very design of the internal combustion engine is such that its endurance and reliability is higher in all existing parameters. It has high revs, for the manufacture of a gasoline engine, durable and wear-resistant materials are used, which allow you to work with a saw in rain, heat and cold.

Gasoline engines have more advanced cooling and overheating protection systems, there is an air filter, all kinds of fuel and oil level control sensors are built in, so its service life is greatly increased compared to an electric motor of the same power. With proper operation, an internal combustion engine works well for a dozen years, withstanding longer and more complex loads that are beyond the power of an electric motor. That is: to build a bathhouse and sawing thick logs, buy a chainsaw, and for household repair work near the house and inside it or to prepare firewood for a fireplace – an electric one..

Read more:  Screwdriver for home network which is better

It should be borne in mind that all the above evidence is relevant only when comparing saws from well-known brands that have proven themselves in the market for high-quality technology. Therefore, a good German electric saw is a priori more reliable than a cheap Chinese chainsaw..

Economy

With today’s record gasoline price hike, electric and cordless saws will undoubtedly be cheaper to operate because they do not require constant filling of gasoline, oil changes and periodic maintenance or replacement of engine parts. long-term operation The savings are explained by the fact that gasoline engines have an increased service life, that is, they can work for several years without forcing you to buy a new saw.

Which saw to choose: benzo or electric?

Gasoline or electric? This question arises before every potential buyer of a saw. Tired of manually sawing boards, storing firewood and doing minor construction work? It’s time to automate the process! There are many ardent supporters of both benzo and drank. Many owners of certain products will never give them up in favor of another option. But still, there are objective reasons to prefer this or that device to a particular user..

First you need to understand: both a chainsaw and a saw are well suited for various purposes. Both devices do an excellent job of cutting logs. To choose a tool that is more useful for yourself, you need to consider your working conditions.

Which is better than a chainsaw or a saw

For home. electric, for the yard. gasoline

Which saw will do the job well: a chainsaw or a saw? The answer to this question has long been found among the owners of the instrument. If you are going to work indoors or near it, there is no problem with carrying or supplying electricity. it is better to prefer a saw. And vice versa, if the front of the work. trees, garden, forest, bushes, remote from the house, then a gasoline product will be optimal.

For household chores, it is better to prefer a saw for several reasons..

  • Easy to operate. The owner has only two things to do: turn the device on and off from the outlet. You do not need to fill in gasoline, dilute it with oil, jerkily try to start the saw. When turned off, the work stops immediately, there is no need to drain the fuel.
  • Comfort. Even with the most intensive work, there is no smell of gasoline and smoke, and the noise is incomparably lower than on a gasoline analogue. This is very convenient for indoor work: not everyone can easily tolerate gasoline vapors.
  • No ICE breakdowns. The electric motor is much less finicky than the gasoline one. Poor quality fuel, incorrect proportion of fuel and oil, elementary wear of components. and the chainsaw won’t start. Only a master will be able to tell what exactly the breakdown is..

At the same time, there is no equal to a chainsaw far from home. Why?

  • Power. The chainsaw is more powerful than its electric counterpart: the chain spins faster, takes more powerful tree species and thicker trunks. Where the saw gets stuck, the gasoline one will cut even the largest branches and logs into firewood without any problems.
  • Practicality. Take such a tool with you to the garden, forest and even climb a tree with it. You won’t get tangled up in extension cords, won’t worry about carrying lengths or power outlets.
  • No dependence on electricity in the network. Periodically, the electricity goes out: if there is an accident on the mowing line, then it will be for a long time. With a chainsaw, work will not be idle: workers will usefully spend precious hours, and summer residents. weekend.

Which saw is right for you: electric or petrol? Correct answer. both. Each of them is good in certain operating conditions..

We have a wide range of tools for you. With the help of levels, multimeters, rangefinders and tape measures, you can make all the necessary measurements before carrying out construction work. Saws, planers, hammer drills and drills will help you in joinery, frame assembly and flooring. Nailers, screwdrivers, wrenches, staples and pistols are also available. with them, you can significantly relieve your hands. Every home craftsman, specialist or construction team will find many useful tools that will simplify your work..

Classification according to conditions of use

If we talk about the conditions for the use of chain saws, according to such criteria, there are three types: professional, semi-professional and household.

Professional models can be used every day, because their power is quite high.

The tools are equipped with vibration protection and comfortable handles of a special shape, making it easy and relatively safe to work with them. The reliability of professional saws is at a height, but the price is also quite considerable. Such units are usually used on construction sites and in the forest..

For short but regular processing of materials (simple construction or garden work), semi-professional chain models are ideal.

The simplicity of the protection system, the power of an average level and a more affordable price compared to professional counterparts are the main features of these saws. The basic rule of using tools is not to overload them, and then the devices will serve on the farm for a long time and reliably..

Household units are a good option for performing single sawing work in the garden, in the country. They usually have the most simplified design, light weight and quite affordable price. Therefore, it is convenient to use them, and the purchase will not hit the family budget..

Electric or chainsaw: which tool to choose?

Are you planning to do a large-scale harvesting of firewood for the winter, equip the garden with the help of various structures and decorative elements, build a wooden house? Whichever of these things you have to do, you need such a useful tool as a chain saw! What type of device is better to choose – electric, gasoline, professional or household, we will talk in this article.

Types of chain saws

According to the power sources, the saws can be electric, gasoline or cordless. Each of them has individual characteristics and performance indicators, but the first two types are united by the presence of built-in brakes. They instantly stop the movement of the chain in the event of any emergency situations – chain breaks, tire rebounds, etc..

the saws have special motors that run on the mains and are connected to the saw units using transmission systems.

Drinking has many advantages. First of all, it is a low noise level during operation. In addition, such devices do not need to be refueled, which means that no emissions are generated, so they can be used even indoors..

In operation, electric saws are extremely convenient, however, the radius of their use is always limited by the length of the network cable. In addition, these devices, in comparison with gasoline models, have a low power, which, of course, affects the possible ways of application..

The saw chain should be checked regularly and sharpened if necessary. Blunt teeth will significantly load the device and reduce overall performance.

Chainsaws are more powerful than electric chainsaws, but also less environmentally friendly. They run on fuel, the combustion of which is accompanied by a significant emission of harmful gases..

The “heart” of such units is a two-stroke gasoline internal combustion engine. An automatic centrifugal clutch mechanism, which limits the movement of the chain at idle, serves as protection against accidental injury while working with a fuel saw..

Unlike electric options, gasoline ones make a lot of noise during operation. But you can easily take them with you for work in the forest, garden or on a construction site..

Among chainsaws, there are specialized models for pruning both thin branches and large trees. They may differ in size, shape and power..

Cordless saws – universal mobile units with built-in electric motors that operate on battery devices.

In terms of operating noise and environmental friendliness, battery models are approximately at the same level as classic electrical devices. The main difference between the two is power – battery-powered saws tend to have less power. Therefore, rechargeable batteries are not effective everywhere, and their scope is limited to small summer cottages..

How a chain saw works?

Such units consist of two main parts – an engine and a saw unit, which in turn is formed on the basis of a bar and a tensioned chain with cutting edges. Elements of the saw head are often called a headset, since they can be easily removed and, if necessary, can be replaced with new ones..

The saw itself works as follows: the torque from the engine is supplied to a closed circuit in a circle, which at the moment the saw starts to move along the tire that sets the direction of movement. When the cutting edges of the chain come into contact with the material, it is sprayed.

And yet: which model to choose?

  • – for large-scale construction and long-term logging work, choose a powerful gasoline saw;
  • – gasoline models are more powerful than electric ones, moreover, the work of the latter always depends on the presence of a power source nearby;
  • – if you need to process wood or similar materials indoors, pay attention to an electric type saw – it produces a minimum of noise and does not emit harmful gases;
  • – take into account the amount of work to be done and do not buy a too powerful gasoline unit – using at partial speed with insufficient load can lead to a deterioration in efficiency and breakdown;
  • – for saws, a different rule applies – the higher the power, the better, because due to this you will be able to perform a wider range of work;
  • – Before buying a saw, make sure it is comfortable and ergonomic.

Special saws

In addition to classic saws, modernized subspecies are also presented on the market. One-handed ones are used to care for tree crowns. In terms of technical and price indicators, such saws are close to professional ones. A distinctive feature of these systems is their small size, low weight and the way the handle is placed. The latter is located not behind, but on top, which allows you to operate the unit with one hand.

Rod saws are used to cut tall branches that are difficult to reach. They are both gasoline and electric. In principle, the system is quite practical, but only if you have a huge garden with dozens of trees.

Cordless saws are more popular with homeowners. They, like the one-handed ones, are especially easy to use. But whether such devices are worth their 15,000 rubles is a moot point.

Makita EA3203S-40

Petrol

pros

  • Performance
  • Power
  • Ability to work in the forest (no connection to an outlet)
  • Maneuverability
  • Relative resistance to aggressive environment

Minuses

  • Relative complexity of system maintenance
  • The need to purchase and control the availability of gasoline and oil
  • Noise
  • Smell
  • Heavy weight
  • More difficult launch (not always the first time)

Stihl MS 180-14

saw or chainsaw which is better?

Each of the systems has the right to exist, and any of them will be the best solution for a particular task..

We will understand the general principles of choosing saws and consider the main features that determine the advantages and disadvantages of different saws.