Stihl semi-synthetic oil
Stihl chainsaw chain oil is an environmentally friendly lubricant, as it is made from high quality virgin raffinates. What kind of oil to fill in the chainsaw to lubricate the chain. The oil contains no impurities that can pollute the environment. This tool can be used in any climatic conditions, and it will behave equally effectively even at low temperatures. Stihl chain oil reliably protects saw chains from wear. This composition can be purchased in different volumes. it depends on the characteristics of the chainsaw and the degree of load on it.
Chainsaw chain lubrication: how the system works and how to fix problems
One of the important chainsaw systems, without which work is impossible, is the forced lubrication system of the chainsaw chain. It’s not a secret for anyone that at the time the saw is operating, the chain friction against the tire of the chainsaw, which causes it to heat up and premature wear. To soften friction, the chain mechanism must be constantly lubricated..
IMPORTANT. An experienced electrician has leaked into the network the secret of how to pay for electricity in half, a legal way. Read more
Why is oil in the saw important??
It doesn’t matter which chainsaw is powered by a gasoline engine. In chainsaws, a two-stroke engine is used, and the role of a reducer is made by a single-stage chain transmission, which sets the chain in motion. In two-stroke engines, the gasoline-oil mixture is poured directly into the tank. Frequently asked questions: chainsaws – how much oil do you need to pour into a chainsaw? To make a gasoline-oil consistency, use gasoline with an octane rating of 90 or higher. In our criteria, this is gasoline A92 or AI92. It is better not to use 95, because it can be produced from 92 with the help of additives and after some time will lose its characteristics. Use the freshest gasoline, as it polymerizes over time, especially in the light. As a result, carbon deposits appear in the combustion chamber..
Conditions for the use of oils in chainsaws
Synthetic Engine Oil Test Results Table.
Chainsaws operating at high temperatures can function efficiently due to oils equipped with iron additives. Their main property is to provide lubrication at elevated temperatures..
Important! Experienced craftsmen do not recommend using a tool that has been running idle for a long time..
With this operation of the motor, its running-in is not carried out. The use of a chainsaw with a four-stroke engine with a suitable oil, with its complete combustion, is not associated with special requirements.
What mix oil to use! What ratio should I run in different saws!
solvents in two-stroke oils can be 20%. The result of their application can be negative, since with an increase in temperature, the quality of chain lubrication decreases. If the chainsaw is equipped with a two-stroke engine, then the oil should not be used with the maximum number of additives, as they contribute to an increase in the viscosity..
What oil is used in a chainsaw?
Experienced experts advise using one part of the fuel consistency for 2 weeks.
The life of a chainsaw is determined by the type of lubricant used when working with equipment. A saw with a two-stroke engine and a fuel tank are used in accordance with the annotation. Often, a fuel mixture is made by mixing gasoline and oil, which are combined in a specific ratio. This information must be indicated by the manufacturer in the appropriate annotation..
If the inventory is Russian-made, then gasoline with the AI-76 brand is usually used, as well as ordinary motorcycle oil. The proportions in which gasoline and oil are taken are 1/25. If chainsaws of foreign production are used, then the requirements will be different for all this. They are reduced to the use of gasoline with an octane number equal to 95 and 92, a special oil is immediately used, suitable for these grades of fuel.
Oil and fuel are mixed in a ratio of 1/40. Appropriate is the introduction of measuring canisters, which help to significantly simplify the process of producing a fuel consistency. The use of foreign production tools requires an appropriate refueling of motorcycle oils.
It should be borne in mind that it is possible to use certain types of foreign-made lubricants by working with chainsaws, the cycle of which is 8.5 thousand per minute. In the main, a tool is used with a cycle of oscillations in the spectrum of 11-14 thousand / min. The use of foreign oils in such saws is a prerequisite for reducing the motor resource by an average of 8%. If the chainsaw is operating at full power, then the lubricant is consumed half an hour after it is turned on..
Experienced masters advise the introduction of one fraction of the fuel consistency within 2 weeks, since a chemical reaction takes place differently. With all this, oil can lose all characteristics, and gasoline is capable of oxidation. As a result, parts are clogged, the motor overheats and the CPG is jammed. The type of oils to be poured into the instrument must be carefully controlled..
What to look for?
Used oil is not recommended for chainsaws.
When choosing a chainsaw, it is very important to find the type of tire that is required for your purposes. Flat tires with a low profile chain are no longer hazardous, which is why they are usually used in household chainsaws designed for home use. For some types of work, chainsaws are used with lightweight tires, consisting of iron strips with grooves filled with polyamide.
It is very important to see that accessories for the selected saw can be purchased only of the same brand, since these parts are not unified. For this reason, a recognizable manufacturer that is widely represented on the market is even better when choosing a chainsaw. Increased attention should be paid to the safety of the saw. naturally you can pour oil into an imported chainsaw how much oil to pour into. Here the choice is made on two aspects: vibration protection and reverse shock protection. The further the fuel tank is from the engine, the lower the vibration. In addition, rubber gaskets between the handles and the body protect from vibration. In order to protect the user from a reverse blow, a brake and a shield are used. Backstroke is likely in this case if the material to be cut is caught only at the end of the bar. The brake is positioned so that, with a reverse impact, the hand presses on it with an automatic machine. A guard insulates the saw during rebound. It should be understood that Swiss brands of chainsaws are not equipped with a shield.
Oregon
What kind of oil to use to lubricate the chainsaw chain and how to choose one that can be used at any time of the year? The Oregon brand offers formulations that are suitable for all types of instruments. Viscosity stability is a guarantee that the oil is suitable for operation at any time of the year. The composition contains refined mineral oils, to which additives are added. The peculiarity of the Oregon compositions is in their manufacture on the basis of high molecular weight compounds. The distinctive features of the oil include:
- protection of the guide bar and chain from overheating;
- reduced vibration;
- prevention of corrosion due to the formation of an oil film.
Thanks to special adhesion additives, such oil acquires greater stickiness, viscosity, so even at high speeds it will not splash and remain on the chain and tire. Thanks to the regular use of oil, it is possible to reduce the load on the cutting attachment, and in general on the entire chain saw mechanism. Special additives reduce the energy consumption of the saw, increasing the efficiency of the sawing process. The main thing is that when using these funds, resinous deposits are not formed..
What kind of oil is poured into the chainsaw gearbox
What kind of oil to fill in the gearbox.
The oil should be selected depending on the ambient temperature and the mode of operation of the gearbox..
For worm gearboxes such as Ch, 2Ch, 1Ch, Ch2, 2MCH, manufacturers recommend the following oils:
It is also recommended KS-19 GOST 9243-75 from minus 10 to plus 50, grease “Transol-100” TU 38.USSR201352-84, MS-20 GOST 21743-76, and for temperatures from minus 40 to 0 ASZp-6 TU 38 10111-70, ASZp-10 TU 38 101267-72.
The manufacturer of worm gearboxes type 5Ch recommends multigrade transmission oil LUKOIL TM-5 (SAE 85W-90).
Manufacturers of worm gearboxes type NMRV and NRV recommend:
Manufacturers of cylindrical gearboxes type 1TSU, TsU, 1Ts2U, Ts2U, 1Ts3U, Ts3U recommend:
| Gear unit size | Volume Hall. oil, l |
Oil grade | Temperature surrounding Wednesday |
| 1TS2U-100 | 1.1 | Industrial I-40A and I-50A | 45 … -15 |
| 1TS2U-125 | 1.4 | GOST 20799-88 | |
| 1Ts2U-160 with aluminum box. | 2.9 | Transmission oil TAP-15V and TAD-17 | 50 … -20 |
| 1Ts2U-160 with cast iron box. | 4.5 | GOST 23652-79 | 50 … -25 |
| 1TS2U-200 | 9 | ||
| 1TS2U-250 | 15 |
It is allowed to use other oils with a viscosity of at least 40 cSt at a temperature of 50 and 5 cSt at a temperature of 100.
Allowed oil temperature in the gearbox housing is not more than 80 degrees.
It is also recommended to pour IRP-150, ITP-200 at a temperature of 50 … -10, at a temperature of 50 … -5 UTP-300, and at a temperature of 50 … -40 TSp-10 GOST 23652-79, Dentax 90 from SHELL, Mobilube C 90 by MOBIL.
cheap chainsaw chain oil
Manufacturers of helical gearboxes of the RCD type recommend:
Industrial 50 GOST 1707-51, tractor AK-15 GOST 1862-63, compressor M GOST 1861-54.