What oil to pour into the chainsaw

On the market you can find the best quality oils, which are advised by almost all manufacturers of chainsaws and manufacturers of saw accessories for them. These products are characterized by high adhesive properties, which makes them effective when working in difficult weather conditions. These lubricants include:

  • STIHL ForestPlus oil. this compound is best used at an ambient temperature of at least 15 ⁰ͦC. The material is supplied for sale in containers with a capacity of 1 or 5 liters;
  • STIHL SynthPlus grease. has good adhesion to metal coatings. The composition shows high efficiency when working under conditions not lower than 25 ⁰C;
  • Husqvarna Bio Advanced oil performs equally well under normal and extreme conditions. The product has a balanced composition with enhanced adhesive properties;
  • Makita Biotop grease is one of the top products. reliably protecting the saw bodies of the tool from increased friction and premature wear. The price of this oil is an order of magnitude lower than that of STIHL products;
  • Oleo-Mac Polar Lube oil is a budget lubricant that stands out for its low price and excellent viscosity and adhesion parameters.

For lubrication with each of these agents, manufacturers advise using no more than 5 mg of lubricant per cycle.

The device of the gasoline motor for chainsaws

Chainsaws, like most other similar equipment, use two-stroke internal combustion engines. Their main advantage over four-stroke engines used in automobiles is the fact that for 2-stroke engines it is possible to remove power one and a half times more with the same volume. But there are also disadvantages. the oil for chainsaws must be added directly to the fuel tank, which increases oil consumption. As a result, the mixture of oil and gasoline, when burned in the working chamber, turns into oil mist, which settles on the cylinder walls and lubricates the elements of the connecting rod-piston group.

Oil for 2-stroke chainsaw engines is diluted in a certain proportion with gasoline and poured into the tank. When the gasoline in the tank runs out, it is necessary to prepare a new mixture. At the same time, you cannot use car oil in a chainsaw. you need a special oil for two-stroke engines.

HP Ultra

Another STIHL oil. Has a synthetic base, due to which it has improved combustion characteristics, cleanliness and engine protection.

Recommended by the manufacturer for long-term use in harsh conditions. Ideal for low temperature applications. HP Ultra is environmentally friendly as spilled oil decomposes 80% in just 21 days.

It is packed in two types of containers, 100 ml and liter bottles. The proportion of the finished fuel mixture is 1:50, which means that a 100 millimeter bottle is enough to prepare 5 liters of the mixture. Green colour. Shelf life 4 years.

It is worth noting that STIHL oils, before they go on sale, go through the company’s laboratory, where they are tested for compliance with all requirements.

When developing oils, great attention is paid to fuel combustion, starting characteristics during cold start, biodegradability, viscosity change at different temperatures (information from the official website of the company).

Oil for two-stroke engines of chainsaws

Modern gasoline saws can be equipped with 2-stroke or 4-stroke engines. In the latter, oil is initially supplied to the parts of the crank-connecting rod group directly from the motor crankcase.

Unlike them, in two-stroke factory engines, the fuel enters the plane located under the piston. To refuel such chainsaws, engine oil must be added to fresh gasoline. It lubricates the rubbing engine parts, preventing their premature wear.

Oil for 2-stroke chainsaw engines must comply with a number of important parameters:

  • when burning oil, a minimum amount of ash should be formed. It is best that the oil used is burned out in full;
  • the lubricant must dissolve quickly in gasoline;
  • oil for 2-stroke engines must be free of harmful impurities that can lead to blockages in the carburetor lines.

The choice of oils for 2-stroke engines largely depends on the types of cooling systems. For the lubrication of internal combustion engines equipped with air cooling systems, 2T standard formulations are suitable. For engines cooled by liquid systems, choose oils marked TC-W3.

In any case, the oil for permanent lubrication of the engine of the tool used must be of the highest possible quality. During combustion, low-quality oils form a large amount of carbon deposits, which settle on the cylinder walls and under the piston rings of the internal combustion engine. Because of this, the standard rings lose the ability to compress, as a result of which burrs appear on the inner walls of the engine cylinder. In addition, poor-quality lubricant leads to overheating of the parts of the crank mechanism. As a result, they jam and fail completely.

Main brands of chainsaw motor oils

STIHL and Husqvarna are leaders in the production of quality lubricants for chainsaws and brushcutters. Their range includes both conventional mineral lubricants for two-stroke engines and synthetic heavy-duty oils. Let’s consider the assortment in more detail.

What to use chainsaw oil?

To find out exactly which oil to use to lubricate the chainsaw chain, you will need to study the instructions of the manufacturer. Almost all tool manufacturers recommend pouring a product that stands out with the highest adhesion properties. This means that the material used to lubricate the chain must adhere to the metal surfaces of the chain and bar.

You need to figure out why the lubricant has adhesive properties. During the movement of the chain on the standard bar, the saw element reaches a high speed. If you use low-adhesion chainsaw chain oil for lubrication, more than half of the liquid will fly off the top of the tire by inertia, never reaching its bottom. As a result, such oil will show itself to be ineffective, and the tire together with the chain will quickly fail due to constant friction.

Elimination of the consequences of using low-quality lubricants is quite expensive, so it is worth calculating in advance whether you need to save and pour oil of dubious quality, which, as a rule, is not much cheaper. Buy oils from official representatives, so you can protect yourself from scammers who offer low-quality lubricants under well-known brands.

Chainsaw owners are well aware of how to fill in gasoline for a chainsaw. But for those who just buy such equipment and do not know how to use it correctly, you need to know that you cannot just take and pour gasoline into the tank. as a result of such an erroneous action, your chainsaw will fail in a short time. The reason is very simple. for two-stroke engines, which are installed on chainsaws, there is no separate lubrication system. It is necessary to dilute the gasoline for the chainsaw with engine oil in a special proportion.

Why does not oil flow to the chainsaw chain?

In the event that the oil does not go to the chainsaw chain at all, it means that either the oil pump drive itself has failed, or there are problems with air leaks.

  • Breakdown of the oil pump. If, when the oil pump plunger adjustment screw is unscrewed, oil is still not supplied to the chainsaw chain, then the drive, which is a plastic ring with grooves, has broken. Over time, the grooves can wear out, and the drive will fail, after which it will simply have to be replaced.
  • The hose that supplies pressurized oil to the chain is loose or worn out. It is necessary to re-attach it to the fitting or replace it.
  • The grooves along which the oil is supplied to the chainsaw chain are clogged. this is the most common occurrence. They need to be cleaned, after which the feed will resume.

Accounting for the operation of the tool motor

What oil to use for a chainsaw, if the calculation is done on the motor? When the number of cycles reaches 8.5 thousand / min, then it is imperative to use the product to lubricate the chain. Those tools, the power of which varies between 11-14 thousand / min, cannot work without oils at all. The presence of this product increases the service life of the device by an average of 10%. That is why experts are sure that the use of so-called “Zhiguli” varieties of oils is excellent for special and household chainsaws.

Experienced experts insist that only one fraction of the fuel composition should be used for the first two weeks. Otherwise, the likelihood of a chemical reaction is high. Gasoline in such a situation can oxidize, and the oil will completely lose its useful properties. Why are such processes dangerous? They are fraught with:

  • overheating of the motor;
  • clogging of parts;
  • malfunction of the CPG.

That is why the product to be poured must be closely monitored.

When choosing the type of lubricant for the tool chain links, it is very important to give preference to the special varieties of the product. It is best to use oil with good viscosity. This consistency perfectly protects the elements of the chainsaw from friction. As a result, the inventory will last a long time and will not upset its owner with constant interruptions in work. If it is difficult to find a special product, then it is recommended to use car oils.

Chainsaw chain oil selection

Having purchased a chainsaw, the owners ask themselves: what is the most suitable oil for lubricating the chainsaw chain? Many people believe that any oil can be used for lubrication, excluding waste. This is true, but the service life of the units is significantly reduced.

For chainsaw chains, it is recommended to use special oils containing adhesive additives to keep the oil on the chain.

If the saw is under warranty service, then it is worth using lubricants from the manufacturer of the same brand or an analogue or competitor. What will it give? If a manufacturing defect has crept into the saw, but this was not immediately revealed, then the use of low-quality chain lubricants may cause a refusal in free warranty service and repair. If the oil pump breaks down, then the manufacturer will first check the quality of the lubricants used.

What oil to pour into a chainsaw to lubricate the chain

Engine oil

  • Mineral.
  • Synthetic.

The synthetic type of oil is recommended by experts, despite the fact that it is somewhat more expensive than mineral oil. The advantage of synthetics is the fact that less carbon deposits form in the cylinders during operation. This means that the engine will be able to last much longer than the one for which mineral water is used. If, after reading these lines, you have a desire to switch to synthetics, then you should not do this if mineral water was poured before that. After all, after 100 hours of operation of the chainsaw, mineral oil contributes to the formation of carbon deposits. If you pour synthetics after that, then it will wash away the carbon deposits, resulting in damage to the internal parts of the equipment.

Each manufacturer recommends using only branded and high-quality types of oils for their tools, so it is better not to violate these recommendations, since this will only harm yourself. In addition to using oil, it is important that the correct mixing ratio with gasoline is observed. The proportion of gasoline to lubricant according to the standard is 1:50, that is, 20 ml of 2-stroke oil must be added to 1 liter of gasoline. In the technical documentation for each chainsaw, you can find the exact proportions that are recommended by the manufacturer, so any deviation from the norm will only harm your tool.

It’s important to know! Do not allow long-term storage of the prepared fuel mixture, as after 5-7 days its quality is significantly reduced, which can also affect the performance of the tool.

Subtleties of choice

What kind of oil should I put in my chainsaw to lubricate the chain when the device is actively operating at low temperatures? Here, the choice is extremely difficult, since the physical properties of the products must be taken into account. Lubricants will not make a product diluted in gasoline ideal. This is due to an increase in the level of viscosity and crystallization processes. The main thing here is to use a device that is adapted to work in such conditions. These are the tools that imply the maximum degree of engine warm-up.

“Synthetics” or “mineral water”?

The market for oils is huge, so should you choose synthetic or mineral oil? Before answering this question, you need to understand how exactly they differ from each other.

Mineral oils are best used to lubricate chainsaws in the summer.

Mineral oil is produced by distilling fuel oil and other petroleum products. Its production is cheaper than the production of synthetic lubricants, therefore the price is lower. But it’s not only that. Mineralka is good to use in the warm season, when the maximum air temperature does not exceed plus 20 degrees, and the minimum. plus 5.

In the minus temperature range, the oil thickens and loses its protective properties. Often, special additives are added to mineral oils in order to expand the temperature operating range, but this increases the cost of production of these oils and ultimately affects the price.

Synthetic oil for chainsaw chain lubrication is less responsive to environmental conditions, at low temperatures it retains its fluidity. Such lubricants have high antifriction properties, they are more careful with the moving parts of the units. Under conditions of increased shaking, these oils perform better even without the use of additional additives. Pouring “synthetics” into the oil tank of a chainsaw may be more profitable than using a cheaper, but higher consumption.

The manufacturer calculates the consumption of lubricants using the example of oils and lubricants of its own production.

Oils with metallic additives provide excellent lubrication at elevated temperatures.

Nanotech Standard. This mineral oil is available in the price range and has excellent friction temperature reduction properties. They can work up to minus 20 degrees.

Nanotek Premium is a mineral lubricant that contains special additives that allow this oil to be used in the operation of a chainsaw down to minus 30 degrees.

Enkor is a synthetic lubricant. It is suitable not only for chainsaws, but also for electric saws.

This is one of the best oils in terms of price-quality ratio. It is not affected by the ambient temperature, and it also contains components that can extend the life of the saw mechanism.

These have been listed budget oils that are in the low price range.

These lubricants are not designed to preserve the environment, but manufacturers have thought about that too.

Makita with a bio biotope attachment. this lubricant is approved in many countries around the world where they pay great attention to ecology. It is completely made from plant-based components, after processing it decomposes well and does not harm nature.

This oil is mineral, it is better to use it in the warm season at positive temperatures. It contains components that prolong the life of the saw unit. But its price is several times higher than the of domestic manufacturers of lubricants.

STIHL with bio prefix. It is one of the best oils for the environment. In the quality-consumption ratio, it has no equal, but the price category is superior to domestic manufacturers.

You can also buy lubricants that are recommended by the manufacturers of benzo and electric saws. There will be optimal consumption and high quality lubricants, which will serve as a guarantee of a long service life of the saw unit.

Weather conditions are an important criterion

If it is necessary to choose oil for lubricating the chain of the device, experts recommend taking into account the season. Weather conditions have a very significant impact on the use of the tool. The video shows that for the summer months, mineral versions are the best option. This type of product tends to crystallize, which is unacceptable for low temperatures. For winter time, oils equipped with special synthetic additives are best suited. Such components reduce the degree of viscosity. Due to this tool, the chainsaw can be used down to –40 ° С. As for semi-synthetic options, they can be poured at moderate temperatures.

What kind of chain oil is suitable for lubricating the chainsaw

Any chainsaw is a complex device that has not only a motor, but also a couple of tanks. One of them is for fuel. Gasoline is poured into it. The second tank is focused on oil use. This product is required in order to lubricate the chain of the device.

For most users, the operation of the device is not difficult. However, the main question remains the problem of which oil to lubricate the chainsaw chain to use. Choosing the right product means extending the trouble-free service life of the device.

One of the selection criteria is the consideration of the saw manufacturer. For domestic instruments Druzhba and Ural, oil used in conjunction with 76 grade gasoline or motorcycle composition is excellent. The ratio with fuel is calculated according to the 1:25 scheme. That is, it must be poured into the tank by no more than 4%.

If we are talking about such high-class foreign models as STIHL and Husqvarna, it is recommended to use branded oil in conjunction with fuel of 92 or 95 brands. To maintain the chain in working order, such a product is produced directly by the chainsaw brands:

  • STIHL;
  • Makita;
  • Husqvarna;

The use of this equipment implies a different ratio. The proportions of consistencies are calculated according to the scheme 1:40. This is only 2.5%. Foreign-made tools are very demanding on the quality of the poured product. Fuel must be cleaned and free from various impurities.

The best chainsaw oil and its main varieties

A chainsaw is a technically complex tool that is difficult to do without in the modern world. Almost every gardener or owner of a private house has this tool. Using a chainsaw, you can cut down a large tree, excess branches or cut firewood for a bath. For all its functionality, the tool requires basic maintenance and the main thing to pay attention to is the choice of oil.

Popular manufacturers of two-stroke oils and evaluation criteria

Modern oils are evaluated according to numerous criteria, including: Parameters by which it is customary to compare the quality of two-stroke oils:

pour, chainsaw
  • – environmental parameters;
  • – base (mineral or synthetic);
  • – lubricating ability;
  • – exhaust toxicity;
  • – wear and burning of rings;
  • – washing characteristics;
  • – the degree of smoke generation;
  • – biodegradation.

In addition to the technical component, the manufacturer plays an important role in the choice of oil for the chainsaw. By the name of the company, you can make rough conclusions about the quality of the oil. Of course, little-known manufacturers can also produce a quality product, but it is better to give preference to proven brands. In any case, all oils fall into three categories:

  • – Economy option. The name speaks for itself. These oils are low cost. Among the representatives of inexpensive oils, Rezer can be noted. This oil is suitable for the category of users who use their tool from time to time, if necessary.
  • – Semi-professional class. A striking representative in this niche are two-stroke oils from the Oregon company. The company has been producing consumables for chainsaws for many years and is very popular among consumers.
  • – Professional category. Such oils are recommended to be used for expensive foreign-made chainsaws. Also, due to their properties, professional oils are used in chainsaws, which are subjected to daily use. This solution allows you to increase the resource of the chainsaw. STIHL oil is one of the most widely used in the professional class.

Additives

A device such as a chainsaw constantly operates at elevated temperatures. This is due to the absence of any cooling system. External cooling factors are also absent, since this tool is rarely used in subzero temperatures. Based on this, chainsaw oil should be chosen with metal additives, which allow providing high-quality lubrication at high temperatures. But do not forget that at low operating temperatures, this oil begins to release soot. Therefore, you should not use the chainsaw idle, without load.

Viscosity index

The bulk of modern chainsaws are equipped with a two-stroke engine. In this regard, everything is simple. There is no need to ask the question: what oil is needed for two-stroke engines of chainsaws? It must be understood that only 2-stroke engine oils are suitable for them. The oil itself contains various additives that are responsible for the level of atomization and the ability to mix with other substances (for example, gasoline). The combination of these indicators is called the “viscosity index”. Each chainsaw must be accompanied by an instruction manual from the manufacturer. This manual contains the viscosity index, which is recommended specifically for the model in question. It is highly not recommended to neglect the viscosity index. Otherwise, the chainsaw may fail after the first use.

Why you can’t use four-stroke oil

Currently, different chainsaw oils are produced, which to use and which not, we will figure it out in this article, but one thing can be said for sure. Four-stroke oil has a detrimental effect on tool life. The difficulty is that such oils were originally developed with the goal of providing the longest possible lubrication. In other words, oil for a four-stroke engine will not be able to burn with gasoline and will leave behind granular soot that can damage the valve.

What kind of oil to pour into a chainsaw?

It is strictly forbidden to use those oils that are used in automobile engines. you need a special two-stroke oil for a chainsaw, recommended by the manufacturer. Manufacturers themselves do not produce lubricants, with rare exceptions, but cooperate with all well-known brands and often offer their products under their own label. Therefore, in the passport you will definitely find a mention of which 2-stroke oil for chainsaws is suitable for this particular model.

Chainsaw oil: what you need to know?

Chainsaw owners are well aware of how to fill in gasoline for a chainsaw. But for those who just buy such equipment and do not know how to use it correctly, you need to know that you cannot just take and pour gasoline into the tank. as a result of such an erroneous action, your chainsaw will fail in a short time. The reason is very simple. for two-stroke engines, which are installed on chainsaws, there is no separate lubrication system. It is necessary to dilute the gasoline for the chainsaw with engine oil in a special proportion.

How to dilute gasoline for a chainsaw?

Before pouring fuel into the tank, it is necessary to prepare a gasoline mixture. The ratio of oil to gasoline for a chainsaw is regulated in strict proportions. as a rule, they are indicated in the owner’s manual. In the event that you do not know how much oil to pour into gasoline for a domestic chainsaw, it is recommended to use a ratio of 1:15. 1:20. That is, use 50-70 ml of oil for 1 liter of gasoline.

As for imported equipment, the proportions are completely different. For example, how to dilute gasoline with 2 kW Husqvarna chainsaw oil? To do this, we look at the instructions and see that the manufacturer recommends using a ratio of 1:50, i.e. for 1 liter of gasoline, no more than 20 ml of oil is used. If there is no passport (lost, torn, etc.), use the Internet or contact the service center. this way you will find out exactly how much oil you need to fill in gasoline for a chainsaw. An increased amount of oil threatens with increased carbon deposits and cylinder clogging, which will lead to fracture of the piston rings and a decrease in compression, moreover, it is expensive. If the amount of oil for chainsaws in the mixture is low, this will lead to overheating of the engine and a sharp decrease in its resource.

If you do not know how much oil to pour into a Chinese chainsaw, and you do not have a passport at hand, then this proportion is approximately 1:25, that is, 40 ml of oil per 1 liter of gasoline. In general, the amount of oil directly depends on the layout. the tighter all units are installed, the less oil is needed.

Before preparing a gasoline mixture for a chainsaw, you must first pour gasoline into the canister, and only then add oil, not otherwise. Otherwise, the more viscous oil will stick to the sides and bottom of the canister and dissolve worse, which will violate the correct proportions of gasoline and chainsaw oil.

Is it possible to pour 95 gasoline into a chainsaw?

Almost 75% of manufacturers in the passport for chainsaw indicate that it is necessary to use AI-92 gasoline. Those owners of such equipment, who first encounter it and do not know what gasoline is needed for a chainsaw, draw parallels with car engines and conclude that the higher the octane number, the better. As a result, not understanding how to properly dilute gasoline for a chainsaw, they dilute oil and AI-95 gasoline.

The thing is that an increase in the octane number is achieved by introducing various additives into gasoline, as is done in AI-95 and AI-98 gasoline. For two-stroke engines, additives are harmful due to their special design, so you need to use AI-92 gasoline, especially in our country. Firstly, it is correct and will extend the life of the motor, and secondly, it is cheaper. But for some manufacturers, for example for STIHL, AI-95 can also be used, but it is better to take it at good proven gas stations.

Choosing oil for chain saw chain lubrication

In addition to the motor, the chainsaw has another important unit with many moving parts. the chain. It does not use engine oil, but chain oil for a chainsaw. it is cheaper and has completely different properties.

Which chain oil to use depends on its “age”. If your chainsaw is new and under warranty, you will ONLY have to use brand oils recommended by the manufacturer. Otherwise, if the saw fails, the service center will immediately remove it from the warranty, because the use of lubricants that do not meet the manufacturer’s requirements is a violation of the operating conditions. On the other hand, branded oils are really high quality:

How to Oil a Chainsaw Bar and Chain

  • allow to work in a wide temperature range from 30 to 50 С,
  • high adhesion improves the “sticking” of the oil to the chain and reduces its consumption;
  • additives reduce friction and extend chain life.

Chainsaw Basics: Fuel and Oil

If the saw is out of warranty and buying branded chain saw oil is out of budget, you can use any gear or engine oil. It is advisable to change it 2 times a year: in winter, use a thinner oil, in summer. thicker.

What kind of oil to lubricate the chainsaw chain also depends on the wood with which you will have to work. For dry wood, gear oil is recommended, for wet wood it is better to use some kind of diesel engine oil.

For imported chainsaws, the following oils are recommended:

  • classification of TA, TB and TC (TSC-1/2/3) according to American API standard.
  • 2t oil for chainsaws of the Japanese JASO standard, corresponding to classes FA, FB and FC;
  • oil of European standard ISO, class EGB and EGC.

As for domestic chainsaws, high-quality oil is also recommended for them. If it is not possible to purchase it, then you can use a lubricant intended for 2-stroke motorcycle engines.

What gasoline to pour into a chainsaw?

Manufacturers strongly recommend using only high-quality gasoline for chainsaws, with an octane rating of at least 92 and m ethanol no more than 10%. It is not recommended to use opaque gasoline containing impurities. they will quickly clog the fuel system and engine.

pour, chainsaw

IMPORTANT: it is not necessary to prepare the gasoline mixture for the chainsaw immediately before pouring it into the tank. this can be done in advance. over, many manufacturers produce ready-made containers with several compartments, for example, for gasoline and oil or gasoline, oil and ready-mixed mixture, and also complete such containers with a special measuring syringe. With its help, oil is collected in the chainsaw in the proportion that is required. But if the mixture is prepared in advance, then the maximum storage period should not exceed 10 days. over time, the octane number of gasoline decreases, and due to the fact that part of the gasoline from the mixture evaporates, the proportion of oil and gasoline for the chainsaw changes.

Expert oil comparison

As a result of comparative tests, 3 winners were determined:

  • Caliber. cheap, good adhesion, biodegradability.
  • Oregon. average price, good adhesion, time-tested brand.
  • STIHL. expensive, time-tested brand, affordable price, a lot of fake.

Here everyone chooses what is closer to their liking and the possibility of biodegradability or the price. Editor’s Choice. Oregon is a middle ground between quality and price.

Other manufacturers

Less common manufacturers of adhesive oils specifically designed for lubricating saw chains, but popular with chainsaw owners, are:

  • Carver;
  • Adhesive Champion, sold in containers up to 10 liters, which is convenient for use in forestry;
  • Makita Biotop;
  • Caliber;
  • Fubag;
  • Oregon;
  • Makita.

Chainsaw sprocket lubricant

To increase the service life and reduce friction on the drive sprocket, the manufacturer equips this mechanism with a needle bearing, which must be lubricated periodically. Can be lubricated with STIHL Multipurpose Grease.

If you do not want to overpay, it is better to use an inexpensive, but no less high-quality option, Litol or Litol 24 grease. Due to its viscosity, Litol will easily replace the original.

It is possible to lubricate the sprocket of the chainsaw tire with the same lubricants as the leading one, using a special filler for this. This allows the lubricant to be pressed in through the technological holes in the tire to the sprocket bearing.

STIHL adhesive oils

The company’s website contains the following adhesive oils designed for various operating temperatures and having a good lubricating performance:

  • ForestPlus adhesive oil. recommended for use at temperatures up to. 15 ° C, shelf life under storage conditions is 3 years. Supplied in 1 liter or 5 liter containers;
  • BioPlus. its peculiarity is a vegetable base, which allows it to decompose quickly when it gets into the soil. It is used up to minus 15, it is supplied in three, five and one liter containers;
  • The latest SynthPlus oil is characterized by its ability to maintain performance at minus 25 ° C.

We also recommend reading an interesting article about all STIHL oils.

Husqvarna oils

The company offers its customers Husqvarna Bio Advanced oil for use in normal and extreme conditions. The oil is produced from plant components and is safe for the environment, it is supplied in one liter and five liter containers.

As an economical solution, the company has Vegoil oil, according to the manufacturer, its consumption is reduced by 40% compared to others. Supplied in a liter container.

The company also produces bearing grease, which it recommends for lubricating the bearings of the drive sprocket and the sprocket on the saw bar.

We recommend reading an interesting article about all Husqvarna oils.

You can also get acquainted with some oils for chains by watching the video below, in it a seller of a large network of tools, Комментарии и мнения владельцев on the use of adhesive oils from various manufacturers.

What oil to use to lubricate the chainsaw chain

Adhesion is a measure of the adhesion of a material, in this case oil, to the metal surface of the bar and chain.

What is it for? The fact is that the chain moves along the tire at a high speed, and if oil is used as a lubricant, which has low adhesion, then most of it, by inertia, flies off the end of the tire and lubrication of its lower part does not occur. This phenomenon can be observed with a small experiment.

The photo shows how the chain guides are lubricated with oil (orange) in the tire.

Start the chainsaw, point the end of the tire towards a bright surface and add maximum gas. As a result, oil stains will appear on it, which are proof of the theory. Also, we definitely recommend reading an interesting article on how to start a chainsaw.

Manufacturers of adhesive oils

Almost all manufacturers of chainsaws are engaged in the production of consumables for them, explaining that these products are most suitable for use in conjunction with their saws. There is no information about how true this is, but based on the experience of operating and repairing chainsaws, it can be noted that there are no significant differences in the service life of parts or at least visible wear.

But the fact is the fact, the manufacturers recommend and cannot be hidden. So, back to the manufacturers, and start with the popular STIHL brand.

How to replace the original expensive oil and is it worth?

In situations where it is not possible to use original ones, they can be replaced with oil for car engines. Cheap automobile oils such as autol or diesel lubrication options, due to low adhesion properties, are unsuitable for long-term use.

Some owners, despite the recommendations, still use analogs, preferring to change the tire and chain more often, but here everyone decides for himself. Such oil cannot have any negative effects on the chainsaw lubrication system, which means the difference is only in the quality of the tire protection against chain friction.

For more details about replacement options, we recommend reading here.