Sabre saw. a new tool, better than angle grinder, jigsaw, chainsaw. Top 4 reliable models
Today we will tell you about a relatively new tool with an interesting name. the sabre saw. It is also called an electric hacksaw. Not only the strong sex can manage with such a tool, but also women. It is something in between such tools as a jigsaw and an electric saw.
Versatile tool suitable for cutting any material. It cuts wood, plastic, brick, metal, glass, steel, foam block, stone, etc. д. The sabre saw will benefit the plumber, builder, finisher, gardener, roofer, homemaker, etc. д.
Some say it can be replaced with a jigsaw, angle grinder, or other tool. But they are not. It can do jobs quickly and precisely where other tools are powerless.
The saw works easily in tight spaces where an angle grinder or other tools don’t make sense. You can easily make perfect curved cuts.
And best of all, the reciprocating saw is safer than other tools.
Not a lot of dust or debris when working with the tool. No need to worry about sparks, overheating. Sabre saw is affordable and will last a long time for its owner.
Bosch Keo
Good reviews of the Bosch Keo saw. It’s lightweight, cuts quickly and effortlessly. Can be operated with one hand. There is a light alarm system that shows the condition of the tool.
Battery-powered (enough for 40 minutes of continuous operation). Takes 2-3 hours to charge.
Saws metal, boards, firewood, tree branches. Can cut branches up to 10 cm in diameter. If overloading occurs, lockout engages. Safety feature shuts down the tool.
Saw blades are very easy and comfortable to change. No particular vibration at work and no jamming.
Reciprocating saws are low-powered, average technical parameters, simple design. They get the job done, but you have to be careful when working with certain materials. Their best applications are sawing wood, cutting firewood, cutting metal parts, profiles, cutting bolts.
Interskol NP-120/1010E
The Interskol reciprocating saw is a technical superiority over the competition. It is characterized by competent balancing, low vibration and good power reserve. well thought out design. gear housing is rubber coated, stops and blade clamping are keyless. According to user reviews, the sabre saw lies comfortably in the hands due to high ergonomics, and the low vibration does not fatigue during long sawing. Experience of using it showed flawless cutting in such materials as wood, light metal, gas concrete. Model NP-120/1010E is devoid of various auxiliary functions, but it is, nevertheless, a domestic class machine.
- low vibration;
- Quality cutting of different materials without edges and burrs;
- professional level ergonomics;
- comfortable to use;
- solid power;
- easy access to carbon brushes.
Hammer LZK 800 B
Electric hacksaw easily cuts wood, thin metal, plywood, plastic. Soft start is provided for convenience and precise sawing. it enables clean work with delicate and coated materials. Clamping jaw is key-locked in place to eliminate slack and slippage in sawing. Metal gearbox of the reciprocating saw is traditionally covered by a rubberized dust cover. Lightweight and comfortable grip of rear handle allows for single-handed or weight-saving sawing.
- turnover adjustment from 0 to 2800 strokes;
- Keyless saw chuck;
- Locking button in switched position;
- does not heat up during the long use;
- working area lights are installed.
ELITECH PS 1100 EP
The tool is suitable for continuous use. Special vibration damping system protects the hands and operator from fatigue during long sawing sessions. Important feature of this reciprocating saw is a handle that swivels 45, 90, 135 or 180 degrees. Double-sided chuck, upside down saw blade can easily make vertical cuts from bottom to top.
The hacksaw is easy to work with any material that is amenable to cutting. Soft start allows you to make light cuts and cleanly cut painted metal, laminated or varnished wood. According to the reviews of craftsmen, the ELITECH PS 1100EP sabre saw is quite successful, but only for domestic use: overheating is observed when used on a production scale. The articulation between the parts is often poor, which can lead to infiltration of fine dust. When working with gypsum plasterboard, aerated concrete, you need to be careful.
- higher power
- compact design;
- it is possible to adjust the depth of the saw;
- swivel handle;
- long mains cable (3m);
- clean and smooth cut.
Sabre saws with the best combination of price and quality can be attributed to the class of semi-professional tools. They are more productive than household saws, serve as a reliable helper when repairing, small construction. It is an excellent alternative to an angle grinder. no sparks when sawing, compact size makes it possible to make cuts in hard-to-reach places. Sabre saws of this class are often used for repairing cars, dismantling in finished rooms.
Metabo SSE 1100
One of the best value for money options. Metabo has equipped the sabre saw with several proprietary technologies: Vibra Tech vibration damping system, Soft Start soft start, M-Quick. quick-release chuck and keyless locking of the stop.
The motor and cord inlet have increased protection against fine dust or splashes. Narrow and ergonomic housing for secure grip even with one hand. The tool has no unnecessary electronics, which simplifies design and reduces cost. Saws can be swiveled through 180 degrees for upward facing cuts.
- Clear and rigid locking of thin and thick saws;
- RPM and stroke control;
- LED illumination of the working area;
- three steps of the pendulum;
- carrying case for easy storage and transportation;
- comes in a carrying case.
BLACKDECKER RS890K
BLACKDECKER designers have created a unique and very handy saw that looks like an upside-down jigsaw. Despite its compact size, the saw has a very good weight distribution and excellent balance. Can be operated with one hand or from the dead weight for extended periods of time. The low power of 500 W is more than enough for cutting 100/100 mm logs, felling trees. A clean cut, smooth start-up reduces starting currents. even a low-powered alternator can be used. The saw has three continuously variable speeds.
- easy saw blade change at the touch of a button;
- unique design. small size and weight;
- great functionality;
- excellent equipment;
- three speeds.
The Hammer LZK 850 B PREMIUM
Thanks to its powerful, yet fairly compact motor, this sabre saw can handle almost any household task. Keyless blade change, rubberized coating of the body in the catching places, double adjustment of the speed. a rheostat button and a “wheel”, greatly simplify the operator’s work. Proven design ensures tool reliability and long trouble-free life, making it one of the best sabre saws in its class.
- keyless chuck;
- solid construction;
- ease of speed adjustment;
- toolbox and accessories included as standard equipment;
- protection against accidental start.
Technical features
There is a wide range of sabre saws on the market, which a small set of numerical values, called technical specifications, helps to determine.
Power. The key indicator not only for the sabre saw, but also for any equipment with an electric motor. The higher it is, the faster the material will be cut. However, as the power increases, so will the weight of the tool, which is not always convenient for the user, holding it constantly in his hands. The power value also affects the price of the device. A side factor of increased power, is vibration.
Before purchasing the most powerful sabre saw, you should weigh all its advantages and disadvantages. For home use the tool up to 1200 watts is good enough. It is able to penetrate metal and wood to an average depth of 13 cm and 30 cm, respectively.
Cutting depth. This is essentially the same power rating, but more understandable to the average user. This technical characteristic determines the maximum thickness of the workpiece that the tool can handle without jamming or causing overheating. Some owners put a fairly long blade on electric sabre saws with low power, however, this can cause damage to the device. The average depth of cut in wood is 18 cm.
Frequency of the saw’s stroke. If you plan to cut very hard material, such as stone, a high RPM is required. Whereas in the case of woodcutting, the performance depends only on the power. Before deciding on this parameter, it is advisable to consider in what area the tool will be used. It is connected with the fact that the great possibilities of the sabre saw allow you to cut any material. It is optimal to buy equipment with a regulator of frequency of movements.
Weight. If you intend to use the equipment in conditions where it is impossible to grasp it with both hands, such as when pruning vegetation in the garden, the tool’s heavy weight will make the work much more difficult. The priority of this value depends on the intended use of the tool.
Pendulum motion. The principle of operation is similar to that of an electric jigsaw, where in addition to the reciprocating motion, the blade also performs oscillatory. This increases the productivity of the equipment and the service life of the saw blade. On models with implemented function, there is a regulator, with which you can determine the amplitude of movement. The harder the material to be worked with, the smaller the pitch should be. In the case of such hard materials as stone, it is recommended to turn this function off. It is also obligatory to switch it off when making shape cuts.
Saw blade quick clamping. This is a functionality of the tool, designed to greatly facilitate the user’s work, as it shows whether it is possible to quickly change the cutting blade without using additional tools, such as a screwdriver.
Sabre saw models have a soft start function. It has no effect on the operation, but it can significantly increase the safety of the equipment and its service life. In the first case, there will be no sudden jerks that can tear the tool out of your hands when you start working. This feature also increases the cost of the tool, so it is worth thinking about whether or not you need this feature.
Last thing worth mentioning about tool features is whether or not there is a support shoe. It is a fixture on which the sabre saw can be leaned when needed. This function is often used for shape cutting. In some cases, the support shoe is fixed at a right angle, while in some, it is significantly deflected. In fact, this feature extends the capabilities of the tool.
How to choose a tool
Before choosing a model, users must clearly decide what the tool will be used for and in what situations. If the equipment will be used rarely and only for household needs, you can buy an inexpensive model. However, it is worth saying here that a low-powered saw needs a pause in operation after every 20 minutes of continuous operation. Professional tool has high power and many useful features in the work, but its cost is quite high.
When choosing a saw, the main thing to look for is the power rating. For household needs in the house or apartment is quite suitable tool with a capacity of 600 watts. As mentioned earlier, the more this figure, the more and weight, so the purchase of high-power equipment (from 1000 watts), it is advisable mainly for construction. The choice of the sabre saw partly depends on the material to be sawed. If you will be cutting not only metal, but also wood, you need to get a model with adjustable stroke of the cutting blade. To reduce the strain on your hands, it is better to choose a tool with rubber pads.
- Double electrical insulation
- Smooth start of the device
- Vibration isolation
- Instantaneous tool stop
- Restriction of accidental start
- A basic model, designed to solve household problems in an apartment, will cost from 3,000 to 5,000.
- The medium-powered saw, which should be chosen by those with a homestead with lots of vegetation, will have
- Powerful professional tools are more suitable for those who are going to use them in construction and dismantling work. In this case, the price tag ranges from 8,000.
- If you need powerful professional equipment that can cut through bricks or make a doorway in any wall except in solid concrete, the alligator saw is the right choice. However, its
Popular manufacturers
What sabre saw to choose? Let’s see what the modern market offers.
Electric hacksaws Makita (Japan) are successfully used on construction sites, in workshops and at home. The saw blade is reinforced, which makes it easy to handle not only wooden boards or plywood, but also aluminum products, plexiglass, metal profiles and PVC pipes. Longitudinally located in the body, the gearbox is combined with a long narrow-shaped blade, so the saber saw can pass in tight spaces, such as between the walls. AVT anti-vibration technology, patented by the manufacturer, consists in the principle of vibration damping by means of a dynamic counterweight in the housing.
DeWALT tools (USA) are equipped with keyless tool change system, counterweight for vibration reduction, rubberized handle and dust protection switch. The professional models cannot be called cheap, but they are designed specifically for intensive continuous loads: a powerful motor and a high-quality plastic housing guarantee high efficiency of work.
Metabo electric hacksaws (Germany) feature the integrated, patented Metabo VibroTech weight compensator for vibration damping. Die-cast aluminum housing for low-maintenance and impact resistance. Vario-Constamatic full-wave electronics are responsible for adjusting the speed depending on the load on the tool. The saws have a consistent blade program that allows a wide range of applications. Blade change with Quick-release function.
Bosch (Germany) produces two lines of sabre saws: Bosch DIY and Bosch Professional. Domestic tools are assembled in China, which provides them an affordable price, professional tools. in Europe. Household tools are good in terms of price to quality ratio, and professional tools are leaders in terms of performance. The models are distinguished by ergonomics and compactness, convenience of adjustment buttons location. Vibration control function is very effective. In a number of our tools there is a special engineering solution. in the front part of the housing there are no slots, which usually clog up with sawdust while working.
The Russian company SPETS presents tools with an optimal price to quality ratio on the market. In the range of electric hacksaws of this brand you can find a good tool for use in the cottage or garden, as well as an inexpensive option for carpentry or locksmith work.
Application-specific models
We hope that you already know the answer to the question, what sabre saw to choose. Every manufacturer has worthy models for household use and professional work, so you can always choose a tool within a given budget. Here are some examples of popular models with positive feedback.
Online and cordless tools. If you still have questions, how to buy a sabre saw, please contact our manager: you can order by phone or online. Use the filters on the left-hand side of the product page to find the right tool for your technical requirements. We wish you a successful shopping experience!
Professional tips for choosing a tool
As any other equipment, the sabre saw can break down due to various reasons in the process of operation. Let’s look at the most common faults and possible troubleshooting methods.
Mechanical failure
The locking device does not reliably secure the blade. The fixing device is most likely to be worn out. In this case, the worn-out part must be replaced. But in some cases it can be caused by the size discrepancy between the holder and the blade, in which case you should simply replace the saw blade.
Poor cutting quality and strong vibrations. These symptoms are most commonly seen when the brass bushings are worn out. The only way to repair it is to replace the defective parts.
Unusual noises and increased vibrations can be heard during operation. These faults can also be caused by bearing failure. Most frequently, this is caused by insufficient lubrication and high loads. The tool can be restored to operation by replacing the bearings and providing effective lubrication.
Electrical problems
Characteristic malfunctions of sabre saws can be considered:
- Failure of start button or speed regulator;
- Abrasion of the graphite brushes;
- No contact in electrical terminals.
- Worn motor windings
Despite the fact that the causes of these malfunctions may be different, the repair is carried out by replacing worn parts.
As can be seen from the above material and a clear demonstration of the various models of sabre saws, the use of this tool can significantly simplify the process of cutting both sheet metal and any other materials. Versatility and mobility of sabre saws allows you to effectively use them both in the household, and for production purposes.
A man should always have a toolbox at home. And the more versatile they are, the better. Today we will tell you about the best 2022 sabre saws that can cut tree limbs, beams, boards, bricks, steel rebar, make openings in wooden walls and even cut frozen meat (or not so frozen, remember “Scarface”).
KP Top 10 Rating
Makita JR3050T (from 8549)
This sabre saw is a multipurpose tool for making cuts in a wide range of materials of different hardness and composition. The power tool uses special flat cutting blades as a working tool, which can be compared to the usual archer saw blade. During the implementation of works under the influence of an electric drive the blade performs reciprocating movements with the necessary amplitude for cutting, thereby simulating the movements of an ordinary hacksaw.
AEG US 1300 XE electric hacksaw is a powerful tool that can cut wood, metal, plastic, aerated concrete and other materials. The electric hacksaw has a stroke of 30 mm. The maximum wood cut of the saw is 250 mm. It can cut through steel up to a depth of 20mm. Quick-lock system and 180° swivel saw blade are peculiarities of this tool. The saw has a power consumption of 1.3 kW: this ensures that you can work effectively in even tougher materials.
It is obvious from the manufacturer’s description that the Bosch GSA 1100 E reciprocating saw is a professional-grade tool. Reliable model allows intensive use. It is best suited for wood, but with the right blades, it can also be used for other materials. Maximum speed of the saw blade is 2700 strokes per minute. It can cut wood up to an impressive 230 mm and metal up to 20 mm (for the plate). An important feature is the frequency control function. The Bosch GSA 1100 E reciprocating saw is equipped with an 1100-watt electric motor. The machine is powered by the mains, to which it is connected via a solid cable. Ergonomic rubber coated handle ensures a firm grip.
As the manufacturer says, this is a universal tool for sawing almost any material. wood, plastic, metal, foam concrete and gas concrete, plasterboard, bricks, widely used for demolition and installation work. Saw is practically indispensable for carpenters, roofers, finishers, locksmiths, framing contractors, and emergency workers. Separate mention can be made of garden work. Continuous work is ensured by high-powered motor. Metal housing is responsible for reliability. Adjustable depth of cut allows selecting the cutting depth. Rubber pads on the housing facilitate holding the tool and protect it from damage.
This powerful all-purpose sabre saw is designed for cutting wood, plywood, fiberboard, particle board, metal, plastic and composite construction materials. Tool-free saw blade change. Preset cutting speed with the adjustment. Good equipment, low price and smooth operation. It is quite light, which also contributes to the convenience of labor.
Sabre saw Zubr ZPS-850 E is indispensable wherever quick and qualitative cutting of metal profiles, plastic materials, wood workpieces, as well as solid construction materials is needed. At least that is what the manufacturer claims. It is a multi-purpose tool for not only domestic but also professional tasks. Quick access and replacement of the brushes, swiveling handle, material shaping capabilities are among the features. Keyless chuck makes blade changing easy. For depth of cut adjustment the adjustable fence is available.
Electric sabre saw BRS-900. ideal for work with wood, soft metal, plastic and other similar materials. As the manufacturer says, it is indispensable for tasks in hard-to-reach places. With the help of this saw is ideal to cut openings in wooden walls, work with rafters, beams and joists. The high power of the reciprocating saw makes light work of even the most demanding jobs possible. Rotatable, ergonomic back handle, quick accessory change, convenient speed adjustment. everything is made in this model for you to feel its functionality and ease of use. The optional brush and file kit is a nice bonus for the owner.
Low-cost, compact and lightweight sabre saws are ideal for home, apartment and hobby room use. You can cut wood, metal and other materials. Elitech PS 500 has the ability to cut wood and steel to a depth of 60 and 6 mm, respectively. The saw blade moves at a maximum of 2,350 strokes per minute. The manufacturer provides a clamp-free saw blade fastening. Hacksaw handle with anti-slip coating: comfortable in all conditions. The model’s advantage is the on/off switch locking button. Low tool weight for jobs of all difficulty and duration.
The PSA1200-C reciprocating saw is used for cutting wood, plastic and metal. Cutting quality in different materials is guaranteed by electronic speed control. Brushes are easy to replace and can be replaced without a call for service. Quick-change chuck that lets you change saw blades in seconds, as the manufacturer claims. The Saw’s special features: 1. Pendulum action for fast working speed 2. The start button is lockable. for continuous use 3. Double insulation protects the saw from damage 4. Neatness of the cut due to the support shoe 5. Cutting depth (wood/metal). 150/10 mm.
What the sabre saw is for
Sabre saw is famous for its versatility and will be suitable for cutting almost any material. This device may well replace a hand saw for metal and wood, circular saw, lopper, electric jigsaw and other similar devices. The field of application is wide enough, as the tool can be used at home, you can take it to work, and you can go on a trip to the cottage.
You need to cut pipes? Great, a sabre saw will do. Pruning work in the garden is required? And this is where our device will do a great job. You need to dismantle dilapidated structures with metal objects? A chainsaw is not a special helper in such cases, but a saber saw will dashingly cope.
How to choose
First you need to decide for what purposes you need the tool. If the priority is to work in the house, garden, vegetable garden, then you can choose a model for the amateur, that is, look at the class “hobby”. This does not mean that the device will be of poor quality, just that it is not designed for intensive work. Ordinary household tools will always need a “rest”, while a professional unit has the most powerful resource.
It is also necessary to pay attention to the characteristics of the device, because the functionality of the model will directly depend on them. Below are some examples of what to look for when choosing a sabre saw.
- Power. This is the most important parameter, because it determines the performance of the device. The higher the power, the faster the working process will be, and the longer the blade can be installed in the model. But there is another side to the coin. the weight, because it usually increases along with the power. In addition, models with a lot of weight are prone to vibration, which means you are likely to have to shell out for the purchase of anti-vibration system. So it makes sense to think before buying. how thick the materials you will have to saw most often, because the greatest depth of cut is related to the power of the device.
- Sawing depth. This is essentially the same as the power. That is, knowing this factor, you can imagine what length the blade is suitable for the saw, without worrying about the probability of getting stuck in the material.
- Maximum saw blade speed. If you need to cut very hard materials, such as stone or metal, a high blade speed is required. If you plan to use the technique for cutting different materials, you should pay attention to the frequency of movement.
- Type of power supply. There are two options here. Either you will work with a constantly tangled long “tail”, or choose a cordless model. There are disadvantages in both variants. If everything is clear with the first one, the disadvantage of the second option is the overpriced device and its minimal power.
- Weight. If you plan to use the tool in awkward conditions, such as trimming garden trees, you should pay attention to a lighter model, because holding a heavy saw “by weight” will be extremely inconvenient.
The best companies
What company it is better to choose a saber saw?
If you do not want to experiment with an unknown manufacturer, then give preference to well-known brands that have long established themselves among consumers. These are such giants as Bosch, Interskol, Makita, Metabo and DeWALT. But the primary importance is, of course, not the brand, but the product itself, so before buying it is not superfluous to look at online video reviews or read reviews.
What electric pruning saw model to buy. recommendations of HouseChief editorial board.ru
Our editorial board recommends choosing models, focusing on the tasks that you plan to solve.
Sabre saws manufacturers. a brief review and comparison of the most popular brands
We will present to your attention the rating of sabre saws, but for now let’s get acquainted with the best manufacturers of popular models.
Sabre saws Bosch
On the first place among the most popular brands are BOSCH sabre saws. Germans are famous for their love of home tools, and in this niche also received well-deserved recognition of Russian customer.
Among the tangible disadvantages of Bosch machines is their cost. But if you want high quality, you will have to pay
Makita sabre saws
Makita is another brand that has long established itself on the market of special construction tools.
Japanese tool is notable for its versatility and high quality. Some models allow you to work even at an angle of 180°.
Sabre saws Zubr and Interskol
Zubr and Interskol represent domestically produced products. Tools of these brands for their performance qualities are not inferior to their “star” neighbors, while winning significantly in the price segment.
Zubr brand sabre saws are cheaper to maintain and easier to repair. Always available accessories, that makes this tool one of the most attractive, though domestic
Basic models of cordless type wall saws for apartments
For household purposes, a device with a 400-600 Watt motor will do. The pull should be enough to easily cut wood branches and perform simple carpentry and locksmith work in the garage.
- Cordless sabre saw.
- Cutting height 60 mm.
- Stroke size. 13 mm.
- Number of strokes per minute. 3300.
- Battery voltage. 10.8V.
- Weight. 1,1 kg.
- Cordless sabre saw.
- Cutting height. 80 mm.
- Cutting part length. 150 mm.
- Number of strokes per minute. 2200.
- Battery voltage. 10.8V.
- Weight. 1 kg.
- Cordless sabre saw.
- Cutting height is 60 mm.
- Cutting length. 120 mm.
- Strokes per minute. 3100.
- Battery voltage. 18 V.
- Weight. 1.9 kg.
And now here are some reviews about the mentioned models.
How to buy a Bosch Keo
Read more on Yandex.Marketplace: https://market.yandex.ru/product/7889545/reviews?track=tabs
Review of the Ryobi RRS1801M
Read more on Yandex.Marketplace: https://market.yandex.ru/product/8281044/reviews?track=tabs
Power hacksaw (electric saw) with medium power for countryside works
If you have a wider range of tasks, you can buy a more powerful saw with a 700-1000 W motor. With this electric wood hacksaw you can easily build a log house or break down an old greenhouse.
- Wall saw.
- Power. 710 W.
- Cutting height 60 mm.
- Stroke size. 20 mm.
- Number of strokes per minute. 2700.
- Smooth speed adjustment.
- Weight. 3 kg.
- Power sabre saw.
- Power. 900 W.
- Cutting height 60 mm.
- Stroke size. 19 mm.
- Number of strokes per minute. 3500.
- Stepless adjustable speed.
- Weight. 2,9 kg.
- Wall saw.
- Power. 750 W.
- Stroke size. 24mm.
- Number of strokes per minute. 2500.
- Smooth speed adjustment.
- Weight. 3,5 kg.
To confirm our rating, here are also user reviews.
My review of the Bosch PSA 700 E
on Yandex.Market: https://market.yandex.ru/product/8507496/reviews?track=tabs
Review of the AEG US 900 XE
Find out more on Yandex.Market: https://market.yandex.ru/product/7154558/reviews?track=tabs
Review of the Zubr ZPS-750-115E
Read more on Yandex.Marketplace: https://market.yandex.ru/product/6979581/reviews?track=tabs
Professional sabre saw for metal and aerated concrete for demolition
If the work is serious: cutting metal or bricks, then you are looking for a saw with a power from one kilowatt. Such sabre saws for metal and aerated concrete most often have a double cutting blade and wide gripping arcs.
Sabre saw repair: features and common breakdowns
Most often problems arise when the permissible load on the device is exceeded. Overheating of the device can lead to motor failure.
The second cause of malfunction can be the jamming of the device with the wrong saw blade. Usually, in addition to the special marking on them, the type of material for which it is designed
Often when the device jams, the saw brushes fail. They can be replaced on their own by disassembling the body of the saw. There should be no problems, in ready-made models you can carry out this procedure yourself. The design allows you to disconnect the brush shank from the wire, release it from the grooves and replace the old elements with new ones. In any case, before carrying out any manipulation, unplug the device and study the instructions. If our recommendations were useful for you, write your opinion in Комментарии и мнения владельцев.