What’s the best grass catcher box for lawn mowers

Lawn collector for lawnmowers with their own hands

Blades are the working part of the tool that provides mowing the grass. What to make them with their own hands, use solid strips of rigid, high quality tool steel up to 50 cm long, 2 to 5 cm wide, 2-3 mm. Thin working tips mow better, thicker ones are stronger.

Home-made mower blades are made in different designs.

• In the form of a single, centered, 30÷50 cm long strip with ribs sharpened to the proper side and a drilled mounting hole.
• Assembled construction, consisting of 2 blades 5-8 cm long, which are fastened to a metal strip with one or 2 bolts.
• Disc-shaped.

Drawings of the knives are shown in the photo below.

Wheels with a handle can be taken from an old baby carriage. Practically, it is a ready frame for a homemade lawnmower. Also handles can be made of metal tubes.

When choosing wheels one should take into account that the optimal height of the blades from the ground is considered to be 5 cm. If you put 2 blades, the maneuverability of the created machine is improved, and if 3-4 pieces, the stability is higher. The wheels can also be cut from plywood and mounted with bearings on the planting shafts.

The protective casing for the electric motor can be made of tin, plywood or a part of the washing machine, a suitable model of which is shown in the photo below. In doing so, they make holes in it in order to provide normal air cooling of the running motor.

The washing machine cover can also be used to make a cover around the blades. The platform for installing the motor is made of plywood or sheet metal. Power cord with plug is selected from old household appliances, while taking into account the capacity of the installed electric motor.

Features and purpose

Lawn mower. self-propelled or operator-controlled equipment, capable of cutting grass stems at the desired height. Cordless model works fully autonomously, it requires charging after use. is enough to connect to 220 volts. Self-propelled mowers are good for grass in lawns where it is important to maintain a certain height of the stems.

Such equipment is completely safe in operation, most often has a closed type of construction, which does not expose the operator to risk and is protected from accidental ingress of various obstacles into the mechanism.

Mowers with a high wheel base are suitable for an uneven area, are not sensitive to differences in height. Models with mulching not only throw away cuttings, but also shred them, preparing them for further use as a fertilizer.

Compared to their gasoline counterparts, cordless lawnmowers are quiet. The construction of these models is maximally simplified and does not require complex and time-consuming maintenance. They do not require regular lubrication or refuelling. It is believed that such devices for mowing grass are optimal for maintaining order in a small garden or homestead plot. Cordless mower can cope with bumps and irregularities, without disturbing others.

Honda

Honda lawn mowers mean a minimum of noise and maximum safety for both the user and the environment. The brand produces models with different types of motors. Gasoline tools are suitable for mowing grass over a larger area, while electric tools are suitable for homesteads. Technical performance:

Cuttings are automatically collected in the grass catcher box with improved air circulation. When mowing tall grass, the user can engage the rear discharge.

Process of creation

The initial stage of independent creation of a lawnmower is the selection of parts. The most important thing is the motor. It can be taken from already unused home appliances, it can be removed from any power tool:

Minimum required motor parameter. 500V. Better 1000 V. So it is possible to work at a lower speed. And sharpening the blades will be the duty of a rarer. The choice of motor is influenced by the diameter of the blade and the total dimensions of this equipment. The larger the working area, the more power the engine needs.

Homemade lawn mower as a solution to the problem of a beautiful lawn

Homemade mower is indispensable if the budget is limited, and the lawn still requires constant care. A quality, structurally simple device can easily be made if you have some skill, some old parts from unused devices and necessary tools. In this case, using a handmade device it is possible to improve it by adding the necessary functions.

Even a washing machine can be turned into a mower Source sdelaysam-svoimirukami.ru

Composition of a home-made mower

It is better to assemble a lawn mower on the basis of an electric motor. It should have a power of about 1 kW (500 W or less is possible) with an optimal speed of 1500 rpm, the recommended working width is 50 cm. The motor folk craftsmen usually take from old household appliances (vacuum cleaner, washing machine, chainsaw and so on), the main thing. the operability of the device.

In addition to the most important element (engine), the mower is equipped with a mower:

• A long cord to connect the power supply;
• a comfortable handle for operating the device;
• A high-quality steel blade for horizontal cutting of weeds or lawns;
• With wheels for comfortable movement on the ground with grown grass.

It is also desirable to provide in the design of the homemade device the presence of a protective cover. Blades made of tool steel must be used. Width should be between 2-5 cm, thickness 2-3 mm. One sharpened blade or several blades, 180 or 90 degrees to each other (depending on the number of blades) can be used.

One option for a blade design for a lawn mower Source sdelay.TV

The shape that is chosen for the blade can also be different:

Important! It is possible to make a knife sharpened on all outer edges, which will rotate around its center on a bolt.

The handle for a homemade mower should be long enough so that the user can operate the device without bending or stooping. Most often the chassis from a baby carriage is ideal for these purposes. Other options: pipes or cuttings from various garden tools. By the way, the wheels can also be taken from an old and unnecessary baby stroller.

From the washing machine

The design of the electric lawnmower, which is based on a washing machine with a functioning motor, is simple. Assembly algorithm:

• Take the motor from an unwanted electric washing machine with a starting relay, equipped with a capacitor;
• Prepare a sheet of steel with dimensions of 30 50 cm, cutting a hole in its center for the output of the rotating part of the motor;
• attach the motor to the middle of the steel frame so that its moving part protrudes slightly from the bottom;

Attached motor Source a.d-cd.net

• Make a knife from a steel strip and sharpen it by making a hole in the center;
• To grind out a flange to connect the blade with the motor;
• to put a cutting knife with a flange on a shaft of the engine from below and to fix it by three bolts on a shaft, and one fixing detail from below (it is necessary to make sure that the cutting ends did not go out of the steel sheet when twisting);
• Install from the four corners of the base-sheet one wheel from an old baby carriage (the distance from the blades to the ground should be about 5-6 cm);
• Attach a handle to the sheet on one side, and lead the electrical wire to the handle, wrapping it in several places with duct tape.

angle grinder is perfect for the device lawnmower, because it is practically a universal tool that can even be turned into an electric saw, a drill or milling machine.

To conveniently and firmly strengthen the angle grinder on the base of the future homemade lawnmower, you need to take thick metal or saw in half the wheel disc of a passenger car.

If a welded box of thick metal will be used, it is better to provide protection on the sides, so that the cut grass will not fly on all sides.

Lawnmower body with safety sides Source svoimirukami.lesstroy.net

When the frame is ready, you need to weld the handle to it. One of the options for its manufacture is the use of a thin metal tube, which is attached to the base in the middle, closer to the edge. For ease of operation, it should be located near the side close to the mower. The angle grinder needs to be improved by screwing an extended threaded nut on the working part.

After that, you need to fix the power tool so that it “looks” down into the ground. Before that, a hole must be cut in the middle of the housing so that the rotating part of the angle grinder can enter all the way up to the guard. The last step will be to attach the cutting part (knife) to the angle grinder from below and install the wheels. One or two can be welded on each side.

From a chainsaw

Homemade lawn mowers of the electric type can be constructed even from a chainsaw. This will require:

Handle

The handle for the machine can be taken from an old stroller. From the same place you can borrow the wheels and frame.

If you can not get a wheelchair, you can use a metal pipe to weld the handle.

Grass collectors for lawnmowers: features of designs, rating of models

Most models of lawnmowers are equipped with grass catchers, which are installed on the rear of the units and serve to collect the grass during mowing. They can be of different designs and sizes.

The rotating blade creates an airflow inside the mower housing during mowing. Its power depends on the depth of the blade in the body. The deeper it is planted, the more powerful the vortex flow. The mowed grass is picked up by it and sent to the grass collector. If there is no airflow, the grass cuttings are spread all over the lawn. the mower operator has to spend extra time collecting the grass manually.

The presence of collectors facilitates the process of mowing the grass and significantly saves time on this work. In those cases where the grass catcher box is not included with the mower, there is a question of what model to buy.

There are currently three types of grass catchers available from manufacturers:

This division of devices into groups is carried out by the type of materials from which the devices are made. Soft grass collectors are made of durable synthetic fabric, hard ones are made of impact-resistant plastic.

Combination units combine both of these materials. The plastic is used to make the top and bottom of the structure, while the synthetic fabric is used to make the sides. Each bag has advantages and disadvantages.

Soft type devices are used for installation on lawn mowers of high power. This is due to the fact that in the course of mowing the grass and getting it into the collectors of synthetic fabric, it gets stuck in the fibers. It must be periodically cleaned from the walls of the grass catcher box with a stiff brush. Grass clogging fabric fibers leads to loss of power of the vortex flow that sucks it inside the device.

Grass collectors for lawnmowers: features of designs, rating of models

Most lawnmower models are equipped with a grass catcher box, which is installed on the rear of the machines and serves to collect the grass during mowing. They come in different versions and sizes.

A rotating blade creates an air current inside the mowing unit during the mowing process. Its strength depends on the depth of the blade in the housing. The deeper it is planted, the more powerful the swirl flow. The cut grass is picked up by it and sent to the grass catcher box. If it is not there, the grass cuttings are scattered all over the lawn. The lawnmower has to spend extra time on collecting the grass by hand.

The presence of collectors facilitates the process of mowing the grass and significantly saves time on performing this work. In cases where the grass catcher box is not included with the lawnmower, the question arises as to which model to buy.

Currently, manufacturers produce three types of grass collectors:

This division of devices into groups is carried out according to the type of materials of which the devices are made. Soft grass catchers are made of durable synthetic fabric; hard ones are made of impact-resistant plastic.

Combined devices combine both of these materials. The top and bottom of the construction are made of plastic, and the sides are made of synthetic fabric. Each type of grass catcher box has its pros and cons.

Devices of soft type are used for installation on lawnmowers of high power. This is due to the fact that in the course of mowing the grass and getting it into the collectors made of synthetic fabric, it gets stuck in the fibers. It must be periodically cleaned from the walls of the grass box with a stiff brush. Grass clogging up the fibers of the fabric leads to the loss of power of the swirling flow that sucks it inside the device.

Trading House “Ukrservice”. lawn mowers online store in Ukraine

Trading house “Ukrservice” is an exclusive official importer of brand EGO from Britain, as well as official dealer of such manufacturers as AL-KO, Bosch, Honda, McCulloch, STIGA, Husqvarna.

In the online store you can afford to buy a lawn mower with mulching or side discharge function, as well as models with a plastic or soft grass catcher.