Brush cutter blade sharpening. How to Sharpen Hair Clippers

What is a Brushcutter Sharpener?

A reel mower sharpener is a great tool for sharpening your reel mower blades. It also works very well for sharpening lawnmower blades and other garden tools. If you have a reel mower on your lawn (and you should because they are awesome and good for the environment in addition to being great exercise), then you need to own one of these so you can keep the blades sharp.

A brush cutter sharpener is a machine that helps keep your brush cutter blades in good condition. Regular brush cutter blade sharpening allows you to extend their life and keep them working effectively.

Sharpening your blades will allow you to get a much smoother cut and reduce the amount of effort needed to cut the grass so you don’t get so tired. This tool is designed to keep your mower blades to a sharp edge.

What should you look for when buying a brushcutter sharpener?

There are a number of things that you should look for when buying a brushcutter sharpener. These include the following:

  • Price – This will be one of your biggest considerations. Some of the cheapest sharpeners can cost as little as 30. However, you need to be careful as the lower-priced machines may not be as durable or as efficient as you would like.
  • Build Quality – You need to ensure that the sharpener you buy is built to last. It should be made from durable materials and should be well constructed.
  • Size – You need to make sure that the sharpener you buy is easy to store and transport. It should be small enough for you to be able to carry it around with you and store it away in your garage when it is not in use.
  • Ease of Use – You should look for a brushcutter sharpener that is easy to use. Some of the more expensive machines can be hard to use. You should look for a machine that has an easy-to-use design and is easy to set up and use.
  • Versatility – Some brushcutter sharpeners can be used for a number of different jobs. You should look for a machine that is versatile and can be used to sharpen a variety of different blades.
  • Reviews – You should take a look at some of the reviews of the different brushcutter sharpeners that you are considering. This will give you a good idea of what people think of the machines that you are looking at and will help you to make a more informed choice. After you have considered all of these features, you will be able to find the best brushcutter sharpener for your needs.

Mower types

than any other component of the lawnmower, the blade or blades are the most important part. You can buy the finest one, but if the blade is dull or poorly constructed, the mower will not cut cleanly. To best understand how to buy a lawnmower, then, it is important to understand the different types of blades available.

Rotary mower

The first kind of mower is the rotary mower. The rotary mower uses a spinning blade to slice grass. This blade is rotating at a high speed and can cut the grass very quickly and efficiently. A rotary mower can cut large areas of grass and can cut them so close to the ground that they can look like a freshly manicured golf course.

A rotary mower is also referred to as a lawnmower, and this is because it is used on lawns and is the most popular type of mower.

Reel mower or manual mower

Another type of mower is the reel mower or manual mower. A reel mower is the opposite of a rotary mower. It is not powered by an engine. It is pushed through the grass by hand. The reel blade of the mower is connected to the wheels, so when the wheels are spinning, the blade is cutting the grass.

Zero-turn mower

The third type of mower is the zero-turn mower. Zero-turn mowers are very similar to riding lawn mowers, except they are used in smaller areas, such as a backyard. The zero-turn mower can maneuver very quickly, which provides for a very efficient cutting of the grass.

A zero-turn mower is also called a riding mower. This type of mower is very popular in the U.S. because it provides for a quick, easy cut to the lawn. It can be a little pricey, but you can usually find a good deal on a zero-turn mower.

Self-sharpening mower

A device designed to mow the grass on a lawn with minimal effort. It typically consists of a reel with sharpened blades mounted on a single axis. Additional blades are fixed to the reel in opposite directions. The blades are driven by a small engine mounted at the rear of the mower.

But a self-sharpening reel mower only sharpens the blades when the mower is stopped. This means that you still have to sharpen the blade by hand or with a sharpening device every so often.

And, if you forget to stop the mower, or if you run out of time, or if you get distracted and forget, then the blades will never get sharpened. The blade will, therefore, get dull. And you’ll be forced to replace it. So I find the whole idea of a self-sharpening blade to be a bit misleading.

There are a few other types of mowers, but these are the main types. Each of these implements offers benefits and shortcomings. You can find a mower that fits your needs and your budget.

Mower Sharpener Guide

So still back to the original question, how to sharpen reel mower blades, here’s a general guide to sharpening.

Adjust the blade.

The reel mower sharpening is possible, but it is far easier to adjust it so it remains in good shape. Doing so prevents the blade from becoming dull and requiring sharpening.

Sharpening hair clipper blades with sharpening stone

Inspect the blade for damage.

If you notice damage to the blade or the point where it attaches to the mower, you should replace the blade. Inspect the blade at least once a month.

Preparing for sharpening.

To sharpen reel mower blades, you need to remove them from the mower. To do this, you need to remove the bolts from the mower deck and the cover of the mower.

Sharpen the blade.

You can sharpen the blade yourself. First, remove the blade from the mower. Hold it against a file or sharpening tool and pull it back and forth in a sawing motion. It will take several minutes to sharpen the blade.

Oil the blade.

After sharpening the blade, wipe it down with a damp cloth and then oil it. Rubbing a small amount of motor oil over it will help to keep it clean and sharp.

Reattach the blade.

Once you have sharpened the blade, reattach it to the mower. A reel mower also requires that you sharpen the blade, a file can be used for it.

Although the following tips don’t apply to sharpening reel mower blades, they will help extend the life of your lawnmower. Keep your mower sharpened. Doing so will extend the life of the blade and save you the trouble of having to sharpen it. If the blade becomes bent, replace it rather than attempting to straighten it.

As we talk about the question of how to sharpen a reel mower, there is not much different from the above plan.


Why should you have a reel mower sharpener?

Using a dull blade on a reel mower causes more friction on the grass which causes more wear on the grass. The wear will cause thinning of the grass which also causes the grass to die out. Thinning of the grass causes the mower to work harder and causes the mower to need sharpening more often.

What kinds of rotary mower blade sharpeners are possible?

A rotary mower blade sharpener can work with a sharpening stone. Grinding wheels are also possible, but you have to be careful not to harm the blade from excessive grinding. A file can also be used. The teeth must be filed flat, so the blade can be sharpened by using a rotary mower blade sharpener.

What can you use a reel mower sharpener for?

You can use it to sharpen the blade on a reel mower. The sharpener helps to keep your mower blades sharp and ready to cut the grass. Simply insert the blade into the slot and the machine sharpens the blades.


There is no doubt that a reel mower is a great tool for your lawn and garden. You can save so much money by using this mower. over, the mower is very easy to use. The mower will help you to save the environment.

Sharpening the reel mower is not very difficult. There are some tips you can follow. You should sharpen the blades to make them sharp. You can also use the lubricants to make the mower run faster.

How to sharpen hair clippers or cutters

Many people would simply buy a new blade as they would think that sharpening a blade is a waste of time. However, a sharp brushcutter blade will be a lot more efficient and will cut the brush a lot quicker.

How to Sharpen Hair Clippers

This article was co-authored by Laura Martin. Laura Martin is a Licensed Cosmetologist in Georgia. She has been a hair stylist since 2007 and a cosmetology teacher since 2013.

wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 19 testimonials and 80% of readers who voted found it helpful, earning it our reader-approved status.

This article has been viewed 648,078 times.

Most hair clippers have an auto-sharpening feature that keeps the blades sharp, but they may still wear out quickly if they are not regularly oiled and cleaned. Prevent ragged, uneven cuts and snagged hair by sharpening your blades each time you notice problems. Clean the blades first to remove hair and rust, or the blades might not sharpen correctly.

Cleaning Hair Clippers

  • If the bottom blade does not pop out easily, use a pair of tweezers to pull it off the base.
  • Take note of how the pieces fit together, and how the blades are positioned in relation to each other, to make reassembly easier.

Brush out hair and debris. Cleaning your hair clippers may already make them much easier to use, and allows you to sharpen them evenly and without mess. Use a wire brush, steel wool, or toothbrush to remove the hair stuck in the blades. [1] X Research source

  • Some people report success with isopropyl alcohol, although you may need to find a strong, 90% alcohol solution. [2] X Research source Weaker isopropyl alcohol might not work.
  • For best results, apply a couple drops of hair oil before testing. (This is recommended after every second or third session.)

Sharpening Hair Clippers

  • A strong, flat magnet may work instead. Sharpen slowly if using this device, to prevent the blade from falling off the magnet and potentially nicking you.
  • Sharpen both blades using the steps below, one at a time.
  • If you are using a ceramic blade, you’ll need a diamond sharpening stone instead. Read the label carefully, and don’t confuse sharpening stones made from ceramic with sharpening stones that can sharpen ceramic.

Repeat with a fine honing stone (optional). Your blade should now look quite even, but to create a sharper, fine edge, follow up the initial sharpening with a fine honing stone, about 8000 grit. As before, move each side of the blade five to ten times across the stone, moving forward only. Wipe the blade off on a towel.

Reassemble the clippers. Make sure that you have the blades facing the direction they were originally facing, and spaced at close to the original distance apart. Screw the blades in tightly.

  • While an alternate light, penetrating oil can work instead, avoid heavy, dark oils which can clog the blades. [4] X Research source You might want to check with a barber or online before using a new oil for the first time.

Run the clippers for a couple minutes. Turn the clippers on and let the blades rub together for a couple minutes. This will hone the blades further. Your clippers should now be ready to use on hair, hopefully with a noticeably sharper, easier to use cutting edge.

Expert QA

Laura Martin is a Licensed Cosmetologist in Georgia. She has been a hair stylist since 2007 and a cosmetology teacher since 2013.

Your clipper could be pulling because the blades are dull or misaligned, or it could just be that your hair is tangled or that you are moving the clipper too quickly.

Thanks! We’re glad this was helpful. Thank you for your feedback. As a small thank you, we’d like to offer you a 30 gift card (valid at Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy! Claim Your Gift If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even 1 helps us in our mission. Support wikiHow

Introduction: Sharpening Rotary Razor Blades. Safe and Simple Method

About: Hi! I’m Cassey. I’m a biologist, specializing in Regenerative Medicine. Trey is an Electrical Engineer, so we do a lot of left brained activity! To balance that out, and use our right brains … About CasseyShepherd »

Most people in our modern civilizations use razors, whether on faces, legs, unmentionable areas, etc. That means most people also have experience with DULL razors! With a 5 pack of disposable razors, that’s not such a big deal since you just throw them away when they stop giving you a clean cut. But what about when your 150 electric razor stops giving you a clean cut, and you find that new (decent quality) blades are 50. Dull razors are DANGEROUS, as they’re more likely to accidentally cut you while you’re shaving. But paying 50 for razor blades every month/few months is dangerous too, for our bank accounts. So we try to figure out how to sharpen our dull razor blades instead of purchasing new ones!

There are lots of YouTube videos showing how to “sharpen” electric razor blades using Jeweler’s Rouge, or Polishing Paste, and a lot of them involve blood… As the blades spin into the poor person trying to sharpen the blades like tiny ninja stars. NOT a safe way to sharpen the razor blades! Additionally, who keeps Jeweler’s Rouge or Polishing Paste laying around. (If you do, please disregard that statement, I take it back!!) My hubby is a private engineering contractor/troubleshooter and we decided to break it down and take a look at it, to accurately define the problem. Here’s what we found.

There’s good news for us cheapskates! Razor blades don’t actually get dull. The microscopic edges of the blades oxidize over time, which interferes with the blade’s cutting abilities. When sharpening the rotary blades, you just need to knock off the oxidation, on both the blades and the screens of the electric razor. Toothpaste contains a little grit to help clean teeth. When we apply toothpaste to the razor instead of our teeth, that grit hones the razor’s blades and removes the microscopic “metal lips” that form at the edges of the holes in the screens from the blades rubbing over them. This method is simple, quick, involves all “on hand materials,” and leaves your Electric Rotary Razor Blades BETTER than brand new!

Please Note: This tutorial is for the Cordless “Wet/Dry” type of electric razor.

Step 1: Materials

For this project, you will need:

  • An Electric Razor (preferably one you want to start cutting better!)
  • Toothpaste (any brand/type)
  • Small brush (the same on you normally use to clean your razor, or an old toothbrush)
  • Hot water (from your sink faucet)
  • 5 minutes (okay, MAYBE 10 minutes, if you’re being responsible and cautious)

The electric razor used in this tutorial is an 8 year old Phillips Electric Razor, but the concept will work on any Cordless Wet/Dry Electric Razor. Please note, this will ONLY work with the Cordless Wet/Dry Razor, as it involves getting the razor wet. Using a corded Electric Razor is a fire/electrocution hazard! Don’t become the next process of evolution meme!

Step 2: Disassemble Razor and Brush Clean

Disassemble your electric razor as you usually would to clean it. You need to be able to access the blades and the screens, as shown in the pictures. Once disassembled, CAREFULLY brush the blades while running them under hot water, then rinse them with hot water. Brush and rinse the screens under hot water also. Then, reassemble the razor.

The close up pictures of the blades and screen are from after brushing. Notice the blemishes, the metal/debris clinging to the blades, and the bumps in the screen? Those bumps are causing the spinning razor blades to bump away from the screen, and not cut your hair!

If your razor does not easily disassemble, that’s okay! Clean it like you usually would (brush it out under water, etc.), and continue to the next step.

Step 3: Applying Toothpaste

Squeeze a bit of toothpaste into the palm of your hand. Not too much, you don’t want to bog down the razor, but enough to get the toothpaste into the screen and blades. Turn the razor on and slowly push the razor against the toothpaste in your hand, turning the razor to make sure the toothpaste is getting in every hole. When you feel the head of the razor heating up slightly against your palm and bogging down a little bit, pull it away for a few seconds, then repeat the process several times.

It’s important to go very slowly here, as you don’t want to bog down and burn up your razor! Make sure the blades all spin in the toothpaste and it’s evenly distributed and runs through the blades and screens well.

brush, cutter, blade, sharpening, sharpen

Step 4: Cleaning It Up

Clean the toothpaste off your razor by again running it under hot water. If you need to disassemble it again to fully remove the toothpaste, do so.

Admire how much better your blades and screen look! All those metal tags that were clogging your blades are gone.

Let the razor dry, and enjoy the clean shave!

I hope this tutorial saves you lots of time and money, and keeps you blood free while honing (remember, honing, NOTsharpening) your Electric Razor Rotary Blades!

Step 5: Some Extra

  • On our razor with 9 blade stacks on each of the three razor heads, cementing the blade stacks together means we’d have 27 cutting blades, instead of the 54 we SHOULD have.
  • Using toothpaste to clean between the two blades in each stack DOUBLES the number of blades actively cutting hair, which doubles the cutting efficiency!
  • Also, this technique is just way quicker and easier than the mirror technique. 😉
  • Believe me yet?
  • No?
  • Try it out for yourself, then leave a comment letting us know how it worked for you!
  • Then share the tutorial so your friends can benefit from it too!
brush, cutter, blade, sharpening, sharpen

Be the First to Share

Did you make this project? Share it with us!

Unusual Uses Contest

Metal Contest

Комментарии и мнения владельцев

when you do clean and hone the blades make sure to put the blades in the same screen they where in before, also put a little on the axels. the razor runs a lot quitter.

You know I’ve read that in my manual. But I mix up which one is which. Is this a big problem?

My manual for my rotary shaver says don’t change/mix blades and screen or it may affect shaving performance. Is that true?

Great idea that I am going to try to see the effect next time I shave if I can remember (need to work on that calendar remote sensing interface mirror).

I usually dry tap or dry brush or blow out to clean. doing that over the trash. The tapping I do in the sink sometimes and wipe the sink with toilet paper before rinsing clean.

Reminds me a gas turbine blades that seat themselves after burning in. Have to try to remember to place the same blades in the same positions also.

Excellent advice. I only differ in one respect. The hassle of charging, discharging, and then discarding the shaver is too time consuming for me, so I got rid of my rechargeables including the expensive Braun 9000, and resorted to plug in only shavers (some would say electric not battery shavers). I have mostly foil but the new Philips 1100 works well too. The new stock Remington XLRs, MS2s, and DA series Remington are great with no battery issues and they are new though more expensive than they were 25 years ago. I am glad I read your explanation as I was ready to do the stone and mirror routine to shartpen the rotary blades. Thanks.

Incredible!! I have a 2 yr. old Norelco and was very close to losing 50 on new blades. A few minutes and no cost and now I have a razor that shaves like it just came out of the box. Great Tip.

Very happy to help you save money. 🙂 Thanks for the great feedback.

Both less costly and less likely to overstress the shaver motor by dragging it down is cooktop cleaner for smooth top (glass top) cooktops. A small amount in the palm of your hand (just like the toothpaste) and a few drops of water will do the job jus as well, if not better. It also rinses away easier after sharpening. I did two of my old Norelcos this way and they are back to shaving like new.

Yikes, you must use some some expensive toothpaste! 😉 Toothpaste is nice because it’s readily available, even if you don’t have cooktop cleaner, and already safe for your skin. Looking at those razor blades under high magnification, I don’t really want to put anything on them that I wouldn’t want embedded in my face/skin.

My husband has had the best shave he has had for months after following your advice

Wonderful! I’m glad to hear it. 🙂

There seems to be some confusion on how best to maintain the blades and screens in rotary shavers. The following has worked well for me for the five rotary shavers I have owned, all lasting more than eight years each. Perhaps it could work well for you, too.

Only use the shaver dry, never in the shower, and never use water to wash out the whiskers. The reason is that the whiskers tend to cake up in the nooks and crannies making a kind of cement that is hard to remove later, and that can damage the moving parts. You also don’t want to drop the thing in the shower as that will break it.

Remove the shaver from the charger after each full charge and leave it off until the razor reaches its minimum charge level. Only then should you give it a new charge. This deep cycles the batteries and gives you the most life out of them which is generally about 200-300 charges depending on chemistry. Obviously, the more time that elapses between charges the longer the batteries, and your razor will last.

After each shave open and lightly tap the head assembly over the sink to knock out the loose whiskers. Lightly brush the parts but it is not necessary to remove them until the time comes to recharge the batteries.

THIS IS THE MOST IMPORTANT STEP: When disassembling the shaver head, always keep track of which blade came out of which screen and return them in that order. Don’t mix them up! The reason is because the blades and screens wear into each other and develop a track that will not fit the other blades/screens if you mix them up. The result will be a poorly working shaver until the blades have had time to wear into the screens again and more of the metal will have worn away in this process. If you keep doing this you’ll be replacing heads and screens more often than necessary. Using this method I have never had to replace a blade or screen ever in the 45 years I’ve been using rotary shavers.

Thoroughly clean the blades when the battery charge goes down to its minimum level. The batteries have nothing to do with the cleaning of the blades except that the time interval seems to work best for both if these steps are done simultaneously. Gently hold the blades in your fingers and brush them with the brush that came with the kit or use a clean epoxy brush. They’re cheap and the bristles can be cut short to make them stiffer if necessary. Brush the screens and holder assembly as well. You can use hot water to rinse out the head after you’ve finished brushing the parts but avoid getting water in the head cavity. Before inserting the blades, put a small drop of mineral oil (baby oil if you prefer) in each screen to lubricate the blades. After closing the head assembly, run the shaver for a few seconds to mate the blades to the motor shafts and spread the oil around, then wipe off the excess oil on the outside of the screens with a tissue.

Using the above five steps your shaver should not require any parts to keep it running throughout its entire life. I have also had three vibrators and one lawn mower type and none have lasted as long as my rotaries. The batteries will lose about half of their charge capacity after 8 years at which point I’ll either replace them or buy a new razor. Replacing the batteries can be difficult and requires some special tools so I don’t recommend this procedure. However, if you cycle the batteries properly and keep the blades and screens cleaned and oiled as described above your shaver should give you many years of trouble-free service.

The LawnmowerBlade that cuts itself sharp

Any landscaping professional knows that sharper mower blades make for sharper-looking lawns, but blades that maintain their sharpness can also improve a lawn-care business’s on-site efficiency and cut its maintenance costs.

Mowing lawns with LaserEdge® Eversharp™ blades means minimal maintenance and downtime associated with blade sharpening, increasing overall uptime and profits.

Redefining the Cutting Edge

High-quality, hardened steel blades equipped with the LaserEdge® Eversharp™ technology on their cutting edges have demonstrated their toughness and durability in field tests, even in the most abrasive conditions.

In one test, the LaserEdge® Eversharp™ cutting edge withstood 30 hours in severe sand conditions and became sharper during use. In a highly controlled durability test, the blade’s advanced technology performed remarkably, enduring multiple impacts from a 1-inch steel stake traveling at more than 200 mph.

Hours of Toughness

In an intense 50-hour field test in central Florida, mower blades with LaserEdge® Eversharp™ technology proved they “cut themselves sharp” when a new cutting edge emerged as the blade wore down.

In the test, a brand-new mower blade had LaserEdge technology applied on one cutting edge and was left untreated on the other edge. After putting the blade to work for 50 hours, the results were clear. The LaserEdge cutting edge was still sharp, and the untreated side was dulled and worn away.

Results will vary based on grass type, soil type and condition, and geographical region.

Cutting Costs, Boosting Bottom Lines

Increased Fuel Efficiency

Dull blades produce resistance, putting strain on the mower deck and making it difficult to maintain speed and efficiency. Mowing with a dull blade can reduce fuel economy by as much as 22 percent, which increases operating costs and reduces productivity.

Healthier, Greener Lawns

A dull blade shreds and tears grass, leaving it vulnerable to dehydration, browning, and disease. LaserEdge® blades cut grass cleanly, making it easier to deliver high-quality lawn care and in-demand enhancements such as lawn striping.

Blades Stay Sharp Longer

In abrasive conditions, a blade can get dull in as little as four hours, and lawn-care operations can go through dozens of blades a week, resulting in downtime and lost revenue. No matter the environment, a LaserEdge blade “cuts itself sharp,” reducing time spent sharpening.

Less Mower Maintenance

Blade replacement can be a dangerous undertaking. Attacking a dulled edge with a makeshift sharpening tool can irreversibly damage a blade and put workers in danger. LaserEdge blades dramatically reduce the frequency and risk of blade sharpening.

D.H. Steinegger, R.C. Shearman, T.P. Riordan and E.J. Kinbacher, “Mower Blade Sharpness Effects on Turf,” in Agronomy Journal 75 (1983): 479–480.

Savings Calculator

See how much you can save with LaserEdge® Eversharp™ lawnmower blades.

  • 432 Saved on Fuel Cost
  • 1575 Saved on Blade Sharpenings
  • 2625 Additional Revenue Opportunity
  • ( 960 ) Premium Spent on LaserEdge Blades
brush, cutter, blade, sharpening, sharpen

Calculations above are based off the following: type of lawn mower: 3-blade, 60-inch cut, gas-powered. Average gas price: 2.38. Lawn mower blade pricing: standard blade is 16. Average cost of sharpening: 5 per blade. Fuel savings: 11%. Blade removal and re-installation time: 30 minutes.

Frequently Asked Questions

How does LaserEdge ® Eversharp™ maintain a cutting edge that “cuts itself sharp”?

The LaserEdge Eversharp technology is applied to the underside of the cutting edge. As the blade cuts grass, the original blade material begins to wear away and exposes a new LaserEdge cutting edge, which is even sharper than the blade’s original sharpness.

Will I need to sharpen my LaserEdge ® Eversharp™ lawnmower blades?

LaserEdge blades “cut themselves sharp” and require minimal sharpening, but you should monitor cutting-edge wear. Sharpening is only needed if the new LaserEdge cutting edge is not presenting itself.

If I find the need to sharpen my LaserEdge ® Eversharp™ mower blades, how do I do so?

If you choose to re-sharpen your LaserEdge blade, do so in a safe, controlled setting with the proper equipment. Remember to prep the machine and remove the spark plug before removing the blade. Secure the blade to a work surface with a vise or clamp, and sharpen the blade with a file, bench grinder, or professional blade grinder. Ensure the blade is evenly sharpened and balanced before remounting on the mower deck.

How often will I need to change my LaserEdge Eversharp™ lawnmower blades?

The LaserEdge blade is designed to “cut itself sharp” and requires minimal sharpening over its life. The overall life of the blade will vary due to conditions, but its lifespan should be at least as long as a standard blade’s. In several of our tests, we found LaserEdge blades had longer lives.

How do LaserEdge ® Eversharp™ lawn mower blades perform in abusive mowing conditions?

The LaserEdge technology is an extremely hard, wear-resistant material. If you mow in conditions that regularly include rocks, curbs, out-cropping stones, and other hard objects, LaserEdge lawn mower blades may not be suitable for your operation.

A good test to see if LaserEdge is right for your operation is to inspect your worn blades. Worn blades that show excessive gouging, deep gashes, or large scraps may not see all the benefits of LaserEdge.

How long will it take for LaserEdge ® Eversharp™ to take effect?

This is highly dependent on geography, soil type, and cutting conditions. The magic of LaserEdge happens when the base blade material wears away at a faster rate than the harder, more wear-resistant LaserEdge material. In highly abrasive soil conditions (like sand), we have experienced standard blades wearing out in as few as 50 hours with blade sharpenings occurring as frequently as every 4 to 8 hours. In these areas, LaserEdge began exhibiting self-sharpening in as little as 5 to 10 hours. When using LaserEdge, these blades required no sharpening over the entire life of the blade. In less abrasive conditions, LaserEdge technology will take effect but over a longer time period.

How much do LaserEdge ® Eversharp™ lawn mower blades cost?

The price of LaserEdge blades will vary depending on the OEM and blade configuration. Although the LaserEdge will typically be more expensive than a standard blade, the benefits of consistently having a sharp cutting edge and increased uptime surpass the increase in blade price (see Savings Calculator).

Where can I purchase LaserEdge ® Eversharp™ lawnmower blades?

Most lawn mower Original Equipment Manufacturers (OEMs) are currently in the process of adding LaserEdge to their product line-ups. Be sure to talk to your local dealer about LaserEdge.

How do I get more information on LaserEdge ® Eversharp™ blades?

Fill out the contact form at the bottom of this page, and Fisher Barton will email you updates on product availability and news.

Get LaserEdge® For Your Business

Ready to bring this cost-effective, state-of-the-art mower blade technology to your lawn-care business? LaserEdge blades are currently available through select OEMs.

Available for the following brands through their independent dealers: (Click on the logo for information on available part numbers)

Connect With An Expert

We’re here to help and would love the opportunity to discuss your technical questions or application challenges.