Angle Grinder • CIMFLOK.COM

How to unscrew a disc on a grinder with a key

Sewing off a jammed circle If, after applying the first 3 methods, the nut does not loosen, then the remaining abrasive disc between the flanges

Cutting rectangular holes in tiles In this case, you need to prepare a drill to make holes along the edge.. Work progress: Mark the hole

The simplest scheme The soft starter with speed control on the KU 202 thyristor has been widely used due to its very simple design (diagram

Step-by-step instruction Just five simple steps: 1) We put the grinder on the floor, table, etc. so that it lies with the disc upwards parallel

Bosch angle grinder 125 mm with speed control Disc diameter: 125mm Soft start: yes Power, W: 850 W Maximum speed: 11000 rpm Weight: 1.9 kg

Cutting bricks with a petrol saw Cutting bricks with a petrol saw If you have a question about how to cut a brick without a

We lubricate the gearbox of the LBM Makita and Bosch with our own hands An action that does not require much effort and cost. Produced

Inner corner First of all, it is necessary to consider the technique of how to cut the inner corner of the ceiling plinth. After all,

How to choose a disc for an “angle grinder“ Concrete is a durable material, so it is quite difficult to work with it. An angle