Can I Cut Metal with a Diamond Disc

Is it possible to cut metal with a disk on concrete. is it possible to cut chernukha an angle grinder with a diamond disk on concrete? Cutting

What can be cut with a diamond blade?

An angle grinder (better known as an "angle grinder") quickly became a popular tool with very wide functionality. Various interchangeable disks make it possible to solve a wide range of problems, starting directly from grinding and ending with cutting various materials.

Feature of Diamond Blades

A special place among the entire cutting tool is occupied by diamond blades. Their main feature is the presence of diamond spraying. The technology of its application can be different, but the spraying effect is almost always the same: the resource of the disk, cutting accuracy and cleanliness of cutting increase sharply. In addition, the list of materials on which to work can be substantially expanded.

For example, the average abrasive disc is extremely inconvenient for cutting ceramics, natural stone or good concrete. Diamond blades handle these materials well.

Basically, disks of this type are designed to work with non-metallic materials, but there are special modifications for metals. However, it should be borne in mind that you can only cut metal with such discs “in a straight line”. Best diamond discs cope with:

all types of stone;

concrete and reinforced concrete.

Can I Cut Metal with a Diamond Disc

Are they universal?

A certain type of diamond blade is better suited for a specific range of tasks. You can, of course, try to work with them as a universal device, but this will lead to reduced efficiency, accelerated wear and increased risk of injury.

Consider the main types of diamond blades:

Segmented disk.

This option is ideal for dry cutting (without forced water cooling), since the disk is cooled due to the design features. They are good at cutting concrete, stone (including granite) or brick.

It is important to remember that the continuous operation of a segmented disk should not exceed 1.5 minutes, otherwise the intensity of its wear increases sharply.

Please note: the smaller the segment size, the slower the drive heats up. Also, reducing the segments reduces the degree of vibration.

Solid disk.

This type is great for working with ceramics or marble. Due to the continuous shape of the disk, an even cut is provided, which allows you to work with decorative materials. On the one hand, a solid disk requires forced cooling (cutting in a puddle is widely practiced), on the other hand, while ensuring high-quality cooling, there are no restrictions on the duration of continuous operation.

For work with especially hard materials, it is recommended to use special disks with oblique slots (slots). They reduce lateral friction, reducing the intensity of heating the disc and helping to remove dust.

Combined drive.

It can be used for cutting any non-metallic materials, but ceramic tiles should be cut with water, and concrete can be without cooling. The disadvantage of this type of drive is its low efficiency in comparison with the above options.

Is it possible to cut metal with a diamond blade?

The urki is cut through the prison bars with a guitar string, but why do you need this? For metal cutting, there are cutting discs. Take 1.5 mm thick for fittings and thin pipes and make sure that the disc has the inscription “Steel” or “Steel” and everything will be OK. And the diamond for the tile is mainly.

depending on what thickness. Reinforcing reinforcement in concrete easily, but also sits faster

It all depends on the softness and viscosity of the metal. Aluminum and Tin. Bald Horseradish

It’s possible to cut, but it’ll quickly go nuts.

You can if you are careful enough!

You may also like

  • Background How to start a trimmer motor or lawn mowers? Start lawn mowing for the first time or after a long downtime Add fuel through the holes for the candles Ignition System Check Engine cleaning ...
  • Angle Grinder. This tool is quite useful in everyday life and in production. With its help, you can perform a wide range of work. An angle grinder allows you to cut stone, metal, tile, grind surfaces,...
  • Independent repair of the Makita hammer drill barrel with a selection of spare partsEven very reliable Makita rotary hammers break down over time. Any breakdown is eliminated, you only need to have st...
  • I want to devote today's article to the sore topic of summer residents and gardeners of the entire post-Soviet space "How to refill a fishing line into a trimmer." Not many trimmer manufactu...
  • The technology of the German concern Bosch has many directions: equipment for cafes and restaurants, machine tools and consumables, tools for the home and garden. One of the brightest representatives ...
  • Lawn mowers are devices that make it easy to care for lawns. The question of how to use the trimmer is asked by those buyers who are just about to purchase a garden tool. The industry produces devices...

Well, except that cast iron or chrome.
If the metal is viscous. and this is the MOST of metals, even many steel grades. then viscous metal filings will get stuck between diamond grains, and the surface of the disk will quickly clog them.

Video: Can I Cut Metal with a Diamond Disc


It may be necessary, for example, to cut an electric pole (there are both reinforcement and concrete with pebbles), but you need to know that such a disk as in the photo is enough for 7-8 cuts and that’s it.

Diamond cutting of metal is cutting with a diamond blade and specialized manual or automatic equipment. Diamond blades are made of hardened high-strength steel, their edges are coated with diamond segments by silver brazing (for wet cutting) or laser welding (dry cutting). In the process of diamond cutting of metal structures, a disk with diamond segments abrades the material into fine dust, thereby creating a perfectly even cut without breaking the metal surface.

Cutting technology is widely used in mechanical engineering, where the accuracy of the cut is a fundamental factor. In addition, the time it takes to perform diamond cutting of metal is significantly less than when using traditional cutting tools. The advantages of this technology also include:

optimal load distribution on the processed material. diamond cutting of various types of metal eliminates any deformation.

cleanliness of work. when cutting metal by the wet method (with water supply to the place of cut), the formation of metal dust harmful to workers is minimized.

silent. diamond tools and equipment operate almost silently, which allows cutting in any room.

high penetration. a diamond disk, due to its strength, can easily cut metal of various thicknesses.

Regardless of the characteristics of the metal structure or product, diamond cutting of metals gives a high-quality result and a long service life. the tool used for cutting various metal alloys has an almost twice as long resource (in comparison with traditional tools).

I do not even know. I did everything here and was not interested, by the way it turned out that I myself did not know that I would have to contact people for this matter: http://stellberg.ru/about/production/services.php. In general, see for yourself, as it is your business, and I just give you advice.

There is one very interesting site on which you can find the answer to your curious question. On this site you can find diamond cutting and the like. I highly recommend everyone to watch. This site is almrez.com

Can I Cut Tile Disc Concrete

What can cut diamond disc?

The angle grinder (better known as the "angle grinder") quickly became a popular tool with wide functionality. Different interchangeable disks allow you to solve a wide range of problems, starting specifically from grinding, ending with cutting different materials.

Feature diamond discs

A special place in the middle of the entire cutting tool is diamond wheels. Their main feature is the presence of diamond spraying. The technologies for applying it are different, alas, the effect of spraying is almost always similar: the resource of the disk, the accuracy of cutting and the purity of cutting are growing sharply. Already today, the list of materials on which there is an option to work is expanding significantly.

For example, medium abrasive disk very inconvenient for cutting ceramics, stone or good concrete. Diamond blades These materials are well managed.

Mostly, disks of this type are designed to work with non-metallic materials, but now there are special modifications for metals. But it should be understood that you can cut metal with similar discs only “in a straight line”. Much better diamond wheels managed with:

  • ceramics;
  • glass;
  • all types of stone;
  • brick;
  • concrete and reinforced concrete.

This disc has an option cut ALL! 1 disc = 60 abrasive wheels. Innovation in metal processing

Universal discs for angle grinder:
?? FREE drywall video course:

Overview diamond discs on tiles and concrete. Clay and paving slabs angle grinder

Tile and diamond blades concrete. Overview of diamond tools and test cutting of clay and paving slabs.

Are they universal?

A certain type of diamond blade is better suited for a specific range of tasks. You can, of course, experience working with it, as with a universal device, but this will lead to a decrease in efficiency, accelerated wear and increase the risk of injury.

Let’s look at the main types diamond discs:

Segmented disk.

This option is perfect for dry cutting (without forced cooling water), because the cooling disk is due to design features. They are great to cut concrete, stone (including granite) or brick.

It is important to keep in mind that the continuous operation of a segmented disk should not exceed 1.5 minutes, otherwise the intensity of its wear increases sharply.

Take into account: the smaller the size of the parts, the slower the disk heats up. Also, reducing the parts reduces the degree of vibration.

Solid disk.

This type is convenient for performing work with ceramics, in other words, marble. Due to the continuous shape of the disc, a flat cut is provided, which allows you to work with decorative materials. The positive point is solid disk asks for forced cooling (conducting cutting “in a puddle” is widely practiced), and in addition. while ensuring high-quality cooling, there are no restrictions on the duration of continuous operation.

To perform work with particularly hard materials, it is recommended to use special disks with oblique slots (slots). They reduce lateral friction, reducing the intensity of heating the disc and helping to remove dust.

Combined drive.

Used for cutting all non-metallic materials, however clay tiles should be cut with water, and concrete Of course, and without cooling. The disadvantage of this type of disc is its low efficiency in comparison with the above variations.