DIY rotary mowing segments. Rotary options

What is a rotary mower for a mini.vector

Consider how to make a mower for a mini.tractor with your own hands and what they are.

Segmented samples have a smaller range of work than rotary. The segment mower for a mini.tractor is used by utilities and designers in landscape. They are cut and mowed by lawn grass, as well as ennoble the territories.

The segment mower is of great popularity among users, because it costs much cheaper than rotary. It consists of well.sharpened plates and a movable knife.

But farmers believe that the rotary model is more profitable to use than a segment.

It can be cut not only by lawn grass, but also by some types of agricultural crops. The rotary mower consists of a metal structure, working discs with knives, which are driven through the tractor power shaft.

Consider how to make such an indispensable thing for a tractor with your own hands.

First you need to decide which type of device is needed, and then already with the types of tools and materials.

How to make a rotary mower for a tractor with your own hands

The following materials and tools will be needed for the manufacture of rotary hayfields:

• wheels with a diameter of 450 mm;
• wheel axis;
• metal pipes and corners (thickness and diameter for choice);
• sheet metal;
• pulleys, knives, bearings;
• rubber belt;
• welding machine;
• drill;
• Bolts and nuts.

We will figure out how a rotary mower is made for a tractor with your own hands.

For rotary lawn mower, you can use scrap metal. You must definitely know what type of connection a mini.tractor has. There are 3 types of home.made connection to the tractor:

First you need to cook the frame, attach discs on it, and on them. knives. Close all this with a protective casing. It will be good if you have old knives from a tractor rotary lawn mower. They just need to be seized from rust, if any, sharpen and weld to the disks. The discs themselves can be made from a barrel or sheet metal 4 mm thick.

Now we make axial shafts from a pipe with a diameter of 3 cm. We fasten one bearing on the pipe. It remains only to attach discs with knives to the axial shaft, weld the pulleys to the pipe, having previously fixed the second bearing on them, and the lawn mower can be considered ready. In order for a homemade rotary mower to the tractor completed, you need to attach a protective metal casing to the entire structure. the shield.

Such a mower mowel for grass copes with grass with a height of 5-7 cm. She can mow grass for the preparation of hay, as well as remove unnecessary harmful plants. Such a haymaking is considered the most profitable and cheap. You can, of course, buy a factory haymaking for a mini.tractor if you do not want to load yourself with independent manufacture and search for material, but homemade rotary mowers for a mini.tractor will last much longer.

The second type of lawn mower. segment. Such equipment is much more difficult to manufacture with your own hands, because its action is given by a crooked-shaped mechanism. One of the cro.shirts is connected to the crankshaft of the power unit. Knives are attached on the side of the krivoship. Knives are similar to 2 saws interconnected, and they work on the principle of scissors. they simply cut grass.

In order to make a segment model for a minister with your own hands, you need to take into account the stages of the sequence of its creation.

The optimal width of segments is considered 72 mm. It is necessary to install a gearbox on a metal base. It has a shaft on which the hub is attached. You need to install a pulley on the shaft, a wheel on the frame, which will not let the mower burst into the ground, and also set up the desired mowing height. The segment mower for the mini.tractor is driven as the rotary. through the power shaft. The most important thing in the work and use of the rotary or segment model is to observe safety precautions.

Rotor.type mower

This equipment can be used for cutting the Luja, as well as to cut fresh herbal cover into hay. However, it is worth taking into account that such a haymaking hay of high vegetation cuts off, and low grass simply crushes small grass.

The main working elements of the device are knives, which are installed on the working discs by means of Shinka. The braid is driven by the power shaft, and sliding is carried out due to the rotation of the lower discs.

To make a rotary mowing frame with your own hands, you can use old metal corners or scrap metal, which is probably available on each craftsman. In order to save time for knives, you can use a tractor rotor. However, in this case, to improve traction and efficiency, it is advisable to reduce the length of the rotor from two to four centimeters, depending on the power of the unit used.

For the manufacture of the rotor, you need to make 2 round plates with a diameter of 390 mm from a sheet of metal or use the bottom for these purposes from an unnecessary tin barrel from machine oil. Exactly in the middle of these circles to weld the legs with which rotation will occur. The welded joint must be made durable.

For the lower support, you can take the disk from the luschtor, but its diameter should not be more than 450 mm. For the axial shaft, a pipe with a diameter not exceeding 30 mm can be used, and bearings 80, 106 will still be needed. On it to make a hole for attaching the lower bearing, and the second bearing is installed on the pulley. Put a device with knives on the axis, and then weld the pulley to the shaft. The rotation of the working discs will be carried out using two bearings.

Such a modification has a capture of 1100-1150 mm and the speed of rotation is 1500 about./min. The entire design of the braid is required to mount on the chassis boiled from a steel corner. For the safety of operation, it is necessary to install a protective casing on a homemade device. To simplify the structure, you can weld the lower drives of the rotary mowing on the frame by welding.

This homemade mower is able to cut off the vegetation cover at a speed of 8-12 km/h. At high speed, the grass is more crushed, and with a low one. integral. Such rotary type equipment can cut off vegetation 60-80mm and is used not only for mowing grass, but also for harvesting a personal plot from weeds.

Homemade mower for a mini.tractor: Saving funds

Awestern equipment used for a mini.tractor has a high price. That is why it will be much cheaper for you to make it with your own hands. But for this you will need certain knowledge and experience, since work is quite serious. The mitch for the mini.tractor is a fairly simple device, having made which yourself, you can save a decent amount on its purchase, but all important characteristics will remain the same.

Currently, there are two types of mowers for a minitator:

The first design is the easiest to manufacture and operate, therefore it is more common. Segment, in turn, is more complex equipment and is much more often clogged compared to the rotor device. In the photo you can see both models of such designs.

What material should be used when installing a home.made mowing?

The main material designed for the production of mowers with your own hands is scrap metal. Here you can apply absolutely anything. It can be frames from old bicycles, and unnecessary spare parts from the car. For the basis of the future device, rusty frames that you can find on any abandoned farm are also perfect.

In addition, it is possible to inspect objects in your yard, where an old metal barrel or battery can also be useful for the manufacture of equipment such as a mower for a minister with your own hands. The most important point in this work is the presence of skillful hands, some knowledge in the technical part of this issue and good ownership of the welding machine.

Homemade rotary mower for a mini.vector: how to make?

In the photo you can see a home.made rotor mower for a mini.vector. This device is a frame, a set of knives installed on the disks, and the casing. This design functions due to the power shaft of the tractor. Movement on the ground is carried out using the lower disks.

The process of installing a homemade rotary mower for a mini.vector:

• We take the collected scrap metal and construct a welded frame from it, which should consist of corners having a size of 40 cm each. Prepare knives for the future device.
• We make two metal disks, the thickness of which should be 4 mm, and the diameter. 39 cm. In this case, the best option would be to use the bottom from an unnecessary iron barrel.
• We fasten the knives on the finished discs. The most important thing is to ensure their free rotation. To do this, you will need the wheels that were used earlier for the lushchik. Their diameter should be about 45 cm. The axis will require an old iron pipe having a diameter of 30 mm. It is also necessary to install bearings: one for a pulley, the other for the pipe.
• Then we fasten the knives on the shaft of the axis. It will be necessary to install pulleys on the pipe by welding.

Safety safety precautions for a homemade rotary mowing

In this article you had the opportunity to find out how you can make a rotary mower with your own hands. In fact, as you have seen yourself, there is nothing particularly complicated in this process, therefore, even a professional can easily cope with this kind of manipulation. However, if you do not want to take risks and start with a small one, we bring to your attention a manual gasoline mower for the grass.

The most important thing in the manufacture of a rotary mower is that you are extremely carefully repelled from our advice on both regarding manufacture and safety.

You may also be interested in the article Home.made sawmill with your own hands.

The advantages of technological progress allow us to significantly simplify the already difficult life of a rural person. Specialists of companies specializing in the production of agricultural machinery thought out and introduced a great many technological innovations that amaze with their multi.ingress.

The tractor mower segment, without a doubt, refers to such innovations. It helps to simplify the task of bearing grass, hay harvesting, which in rural conditions is very important. But one must be careful in choosing such equipment and trust only well.known manufacturers who have proven themselves from the best side.

The rating of household chainsaws is full of variety, choose a functional assistant in the household, based on the opinions of specialists.

The caterpillar tractor T 70 is ready to overcome any obstacles on the ground, click here and see for yourself.

You will learn about all the technical characteristics of the front loader here // MachinSpec.COM/SKLADSKAYA/POGRUZCHIK/FRONTALNYJ.HTML.

You need to not be too lazy to learn more about the specific model of interest to you, ask the seller about the characteristics, ask about the availability of a certificate for products. After all, a segment mower is a fairly expensive thing, which you need to buy once and for life, so you need to approach the choice with all responsibility.

What is included in a home.made mower

For assembling lawnmands at home, it is recommended to use an electric motor. The power of the lifting element should be more than 1 kW. As for the number of revolutions, their number should be at least 1500 per minute.

The size of the capture on average should be at least 5 cm. A power unit in the form of a motor can be taken from any old household appliances. For example, a vacuum cleaner, a washing machine and a chainsaw. The main requirement is the performance of the part.

In addition, the lawn mower is equipped with the following set of elements:

• Electric cord providing power;
• Maneuverable handle that allows you to control the entire installation;
• Knife. It will be used as a cutting part;
• Several wheels for installation mobility.

Experts recommend purchasing a protective casing that helps protect the user at the time of operation of the device.

As a cutting part, it is recommended to use metal knives that can be made of tool steel.

The width of such parts should be at least 5 cm, and their thickness is 3 mm. The photo contains an option to create a saw disk. As for the shape of the knife, it can be absolutely any.

The device of the mowing handle

You can use a metal profile as a handle for a home.made mowing, the length and width of which should be calculated taking into account the growth of the user.

In the process of moving the installation, a person should not bend and experience any discomfort. For the mobility of the installation, small wheels are used, which can be taken from furniture or baby stroller.

Do not use too large details that can disrupt the function of the lawn mower.

How to make a rotary mower with your own hands

The rotary mower is selected taking into account the characteristics of the cultivated land. Models for a walk.behind tractor and mini.tractor are distinguished by transportation methods, dimensions, functionality. Any rotary lawn mower is designed for mowing grass.

Technical characteristics of the rotary mowing

Specialists classify the considered units for the following types:

• devices that mow and put grass in creams;
• devices that mow and put grass in the rolls;
• Rotor mowers on a single tractor that mow and crushed grass.

Some models immerse, flatten the grass, simultaneously mowing and laying in the worship. Taking into account the installation method, experts highlight devices such as a trailer, half.wow and a rotary hinged mower.

The device in question consists of the rear, front and side cutting systems. Devices with 1.2.3 or 5 bars are installed on the tractor. The rotary braid for the grass is launched under the action of the shaft or wheel of a tractor.

In the photo rotor mower on a mini.tractor

The units in question are installed on a tractor and a single tractor in a horizontal position. Knife and connecting rod should move in one plane. To work on a small plot of land, a Polish mower is used for a tractor. The front.mounted hinged model divides the land into corrals.

Homemade mower for a mini.tractor: Saving funds

Awestern equipment used for a mini.tractor has a high price. That is why it will be much cheaper for you to make it with your own hands. But for this you will need certain knowledge and experience, since work is quite serious. The mitch for the mini.tractor is a fairly simple device, having made which yourself, you can save a decent amount on its purchase, but all important characteristics will remain the same.

Currently, there are two types of mowers for a minitator:

The first design is the easiest to manufacture and operate, therefore it is more common. Segment, in turn, is more complex equipment and is much more often clogged compared to the rotor device. In the photo you can see both models of such designs.

What material should be used when installing a home.made mowing?

The main material designed for the production of mowers with your own hands is scrap metal. Here you can apply absolutely anything. It can be frames from old bicycles, and unnecessary spare parts from the car. For the basis of the future device, rusty frames that you can find on any abandoned farm are also perfect.

In addition, it is possible to inspect objects in your yard, where an old metal barrel or battery can also be useful for the manufacture of equipment such as a mower for a minister with your own hands. The most important point in this work is the presence of skillful hands, some knowledge in the technical part of this issue and good ownership of the welding machine.

Homemade rotary mower for a mini.vector: how to make?

In the photo you can see a home.made rotor mower for a mini.vector. This device is a frame, a set of knives installed on the disks, and the casing. This design functions due to the power shaft of the tractor. Movement on the ground is carried out using the lower disks.

The process of installing a homemade rotary mower for a mini.vector:

• We take the collected scrap metal and construct a welded frame from it, which should consist of corners having a size of 40 cm each. Prepare knives for the future device.
• We make two metal disks, the thickness of which should be 4 mm, and the diameter. 39 cm. In this case, the best option would be to use the bottom from an unnecessary iron barrel.
• We fasten the knives on the finished discs. The most important thing is to ensure their free rotation. To do this, you will need the wheels that were used earlier for the lushchik. Their diameter should be about 45 cm. The axis will require an old iron pipe having a diameter of 30 mm. It is also necessary to install bearings: one for a pulley, the other for the pipe.
• Then we fasten the knives on the shaft of the axis. It will be necessary to install pulleys on the pipe by welding.

Assembly

One assembly is not enough for the required result, it is also important to correctly install homemade mowers for a walk.behind tractor. When installing the structure, you must strictly adhere to such rules:

Switch the one.legged tractor to the reverse mode; 2. Place the node in the brand nest by compounding to VOM; 3. It is important to establish a connection by means of a shkvorni with a spring, otherwise this will lead to the destruction of the device; four. The instrument blades must be insured with a protective casing during installation; 5. Get rid of the auxiliary cargo on the wheels of the walk.behind tractor, they will not be needed for cleaning grass; 6. You need to bite the grass gradually, starting small revolutions, turning on the clutch mechanism; 7. Turns are carried out smoothly and leisurely.

It often happens that for some reason the manufacturer does not have a special mower on sale, specifically for this model, or that it does not suit her characteristics. In this case, it is easy to work on a homemade option. Full production on the basis of its economy will be demonstrated by the example of segment variation.

From spare parts, first of all, you need to take a rectangular pipe 5×1.5 120 cm long. An ordinary piece of old braids for grass is also suitable. About 12 holes are drilled on the pipe along the same distances, as drawings are shown.

You should prepare a frame from cooked corners and pipes, the frame can be covered with plywood and attached wheels to it. The tape is made by rubber ring.shaped. It is convenient to fix it with duralumin plates. Shrings are also welded on the frame to install the cutting strip. For the latter, a strip with metal blades is attached to a pipe prepared in advance with holes in advance.

Mole-star for a walk-behind tractor

This device can be used in the summer as a mower, and in winter as a snowmaker. To do this, in the winter version, stars are put on a mower, and in the summer, when the time has come to mow grass, knives from a mower. Such a model can also be attributed to rotary, but it is more complicated.

Grass that can be mowed with this model can have a rigid structure, and snow in winter with an icy nastom.

The design of this model is made of two drums, which are connected by a frame and a conveyor tape with hooks.

The cart is made by welding pipes, metal corners, in general, any metal that can be found. Plywood and wheels are attached to the frame. Wheels can be taken from a children’s bicycle or stroller. The whole frame from the stroller is also suitable. Plywood is taken thick, it is better to use a metal sheet in general. The dimensions of the mowing frame can be different, but the proposed 80×40 cm.

The main working body of this mower is assembled from drums (5), conveyor tape (3), frames (10, 16, 17, 18.20), brackets (19), corners of hooks (4).

For drums, you can use high.diameter cans. The lids and the bottom are cut in them. Two wooden circles are mounted in their place. If you do not have the opportunity to take banks, then you can use a thin sheet of metal and cut 8 discs from it. 4 of them will be an external diameter of 20 cm, four inner diameter 17 cm. Connect them paired, small and large with bolts. We fasten the knives to these discs, 4 for each. Knives should rotate freely, so when fastening we leave a gap of 1 mm. But at the same time, the fastening should be strong so that the knives do not break when colliding with stones. The drums are fixed onto the frame, having previously inserted the sleeve into them.

The drums are attached to the frame, which is assembled from the upper transverse beam (10), and strips with ticking bushings and corners (16). For the manufacture of the beam, a 35×35 mm steel corner is used. The lateral part of the corner must be cut by 35 mm so that the end places for M5 bolts remain. The drums will be connected by the transport tape. For its installation in the corners, grooves with a diameter of 13 mm are made. For the same task, the lower sleeve of the driven drum is installed on the bar (15) mobile, and stretch corners are attached to the upper ends of the axes of the drums (20). To the end platforms of the transverse beam, the corners 20 are pulled by the M5X65 mm screws.

It is easiest to make a transport tape from a rubber strip, which is connected in a ring using a drum plate 2 mm thick.

How such a model works you can watch on the proposed video.

Features of the manufacture of rotary haymaking

The rotary device is used to harvest grass and cut lawns. Small vegetation equipment will be able to grind, and high mowing under the root. Homemade hayfields of this type join the walk-behind tractor, for the tractor due to small sizes, they simply do not fit.

Having decided to perform a haymaking with your own hands, as a basis you can use the Neva one.based tractor or a similar model of such equipment. For work, two disks borrowed from grain seeders should be prepared. You will need a chain and a gearbox from a saw. For each disc, it is necessary to prepare four metal knives from a hardened alloy. To install them in each disk, 6-mm holes are drilled. The tire will fix the knives on the disks so that there is a gap between them, exceeding each of the 2 mm knives in thickness.

Methodology of work

For attaching knives, the axis is made of carbon strong steel. Its diameter should be 8 mm. In order to ensure the free stroke of the knives when performing a haymaking with your own hands, the axis must be tightened with the disk all the way. Discs join the frame, and after the connection is provided with the drive. Discs should rotate towards each other, this will allow you to get grass that forms in the ranks.

Before starting the manufacture of equipment described in the article, you need to ask what the cost of spare parts, because some of them will have to purchase. For example, a supporting sleeve, which approaches the Virax mower, will cost the consumer 50 but you can buy a drum casing for 1200

The back of the hinge is worth a penny. 40 apiece. This is the price and remote protection. Considering spare parts for a haymaking, you should also pay attention to the drive shaft. Its cost is 500 knife holder will cost you 250 a drum sleeve costs 2400 belt pulleys, equipped with a latch, will cost 4000