Honda mower carb adjustment. 9 Fixes For When Your Lawn Mower Won’t Start


Find the CRAFTSMAN original equipment parts and accessories you need to keep your lawn mower, snow blower and other outdoor power equipment performing strong. These parts and accessories are designed and engineered to exact standards to provide reliability and optimal performance. Protect your CRAFTSMAN outdoor power product investment with CRAFTSMAN original equipment parts and accessories.

Can’t find your part? Customer Service can help. 1-855-971-2271 Monday. Friday, 8:30 am. 5:00 pm EST CHAT WITH US


Find the original equipment parts and accessories for your CRAFTSMAN outdoor power equipment on our Parts Diagrams. The Parts Diagram helps visualize components found on your equipment. If you can’t find what you’re looking for or need assistance installing the new part, call 1-855-971-2271.

This HIDDEN Jet is the Cause of Your Engine Hunting or Surging Lawn Mower/Honda Carburetor FIX


CRAFTSMAN original equipment parts can help you maintain your CRAFTSMAN outdoor power equipment long-term. Find parts by machine type: Riding Lawn Mower, Walk Behind Lawn Mower, Garden Tiller and Snow Blower to repair your machine.

Help keep your CRAFTSMAN riding lawn mower running strong year after year with original equipment parts. SHOP PARTS

Find the parts you need to keep your CRAFTSMAN push mower operating in peak condition. SHOP PARTS

Whether you’re cultivating your entire lawn or just a small garden, find the CRAFTSMAN garden tiller parts you’ll need to get the job done. SHOP PARTS

Avoid waking up to that fresh snowfall with a snow blower that doesn’t work! Regular maintenance and replacement of your CRAFTSMAN snow blower parts will keep you ready all winter long. SHOP PARTS


Find parts by part type: Blades, Belts, Tires and Wheels, Engine Parts, Cables, Attachments and Accessories, Pulleys and Spindles.

When you need blades to deliver a clean cut and a healthier-looking lawn, look no further than CRAFTSMAN original equipment blades. CRAFTSMAN blades are designed to provide a precise fit with every blade change. Heat dipped for durability and flexibility, these blades have been tested for thousands of hours to meet equipment standards. Protect your CRAFTSMAN outdoor power product investment with CRAFTSMAN original equipment blades. SHOP PARTS

CRAFTSMAN original equipment belts are manufactured to equipment specifications so you can attain a precise fit with every belt change. These belts have been designed to combat conditions. Made with durable, high strength materials, they’re designed to be flexible enough to withstand continuous bending around pulleys. Protect your CRAFTSMAN outdoor power product investment with CRAFTSMAN original equipment belts. SHOP PARTS

CRAFTSMAN original equipment engine parts are specifically designed for your outdoor power equipment’s engine. Shop air filters, oil filters, fuel filters, spark plugs and more. Protect your CRAFTSMAN outdoor power product investment with CRAFTSMAN original equipment engine parts. SHOP PARTS

When it’s time to replace the cable in your CRAFTSMAN outdoor power equipment, you’ll find the exact part you need. Protect your CRAFTSMAN outdoor power product investment with CRAFTSMAN original equipment cables. SHOP PARTS

A properly working pulley helps your machine perform with maximum power. You can find the exact part you need when it’s time to replace a pulley on your CRAFTSMAN riding lawn mower or snow blower. Protect your CRAFTSMAN outdoor power product investment with CRAFTSMAN original equipment pulleys. SHOP PARTS

A proper-fitting tire will help your CRAFTSMAN riding mower, walk-behind mower and snow blower to have a smooth and sturdy ride. Replace tires and wheels as they wear to help make sure your CRAFTSMAN outdoor power equipment runs at optimal performance. Protect your CRAFTSMAN outdoor power product investment with CRAFTSMAN original equipment tires and wheels. SHOP PARTS

Find the spindle assembly parts you need to help maintain your CRAFTSMAN lawn mower’s performance so your lawn looks pristine. Protect your CRAFTSMAN outdoor power product investment with CRAFTSMAN original equipment spindles. SHOP PARTS

Do more with your CRAFTSMAN outdoor power equipment with a wide variety of attachments and accessories including baggers, mulch kits, sun shades and more. Protect your CRAFTSMAN outdoor power product investment with CRAFTSMAN original equipment attachments and accessories. SHOP PARTS


Enter the product code shown on the product serial number. Then select your language, click “Search,” and download your manual. FIND OPERATOR’S MANUALS

With our easy-to-use online Service Locator, you will get information on your current location and closest service locations, as well as their contact information and driving directions. You can choose to view the service points either conveniently on a map, or a list. FIND SERVICE LOCATIONS

Have your CRAFTSMAN equipment registered Online now. If you don’t know your model and product serial number, call 1-855-971-2271 and we will be glad to assist you. REGISTER YOUR PRODUCT

There are a number of reasons, mechanical and otherwise, why a mower won’t run. The good news is that fixing most all of the issues is easy enough for a DIYer to handle.

By Tony Carrick and Manasa Reddigari | Updated Aug 8, 2022 4:03 PM

We may earn revenue from the products available on this page and participate in affiliate programs.

Lawn care can be tedious, but once the grass starts growing in the spring, mowing becomes a fact of life in most neighborhoods. When you finally muster the strength to tackle that first cut of the season, there are few sounds as disheartening as that of a lawn mower engine that turns over but doesn’t start.

Before you drag the mower in for repairs or invest in costly replacement parts, first make sure that a clogged air filter, soiled spark plug, damaged safety cable, clogged mowing deck, or contaminated gas isn’t to blame. Work through the following steps, and you may be able to get your puttering grass guzzler up and running again in no time.

A lawn mower repair professional can help. Get free, no-commitment repair estimates from pros near you.

Change the lawn mower carburetor filter.

Your lawn mower’s air filter guards the carburetor and engine from debris like grass clippings and dirt. When the air filter becomes clogged or too dirty, it can prevent the engine from starting. To keep this from happening, replace paper filters—or clean or replace foam filters—after every 25 hours of engine use.

The process for removing the filter depends on whether you are operating a riding or walk-behind lawn mower. For a riding mower, turn off the engine and engage the parking brake; for a walk-behind mower, pull the spark plug wire from the plug. Then, lift the filter from its housing.

The only choice for paper filters is replacement. If you’re cleaning a foam filter, wash it in a solution of hot water and detergent to loosen grime. Allow it to dry completely, and then wipe fresh motor oil over the filter, replace it in its housing, and power up the mower—this time to the pleasant whirring of an engine in tip-top condition.

Check the spark plug.

Is your lawn mower still being stubborn? The culprit may be the spark plug, which is responsible for creating the spark that ignites the fuel in the engine. If it’s loosened, disconnected, or coated in water or carbon residue, the spark plug may be the cause of your machine’s malfunction.

Locate the spark plug, often found on the front of the mower, and disconnect the spark plug wire, revealing the plug beneath. Use a socket wrench to unscrew the spark plug and remove it.

Check the electrode and insulator. If you see buildup, spray brake cleaner onto the plug, and let it soak for several minutes before wiping it with a clean cloth. Reinstall the spark plug, first by hand, and then with a socket wrench for a final tightening. If the problem persists, consider changing the spark plug.

Clear the mower deck of debris.

The mower’s deck prevents grass clippings from showering into the air like confetti, but it also creates a place for them to collect. Grass clippings can clog the mower deck, especially while mowing a wet lawn, preventing the blade from turning.

If the starter rope seems stuck or is difficult to pull, then it’s probably due to a clogged deck. With the mower safely turned off, tip it over onto its side and examine the underbelly. If there are large clumps of cut grass caught between the blade and deck, use a trowel to scrape these clippings free. When the deck is clean again, set the mower back on its feet and start it up.

Clear the vent in the lawn mower fuel cap.

The mower started just fine, you’ve made the first few passes, then all of a sudden the mower quits. You pull the cord a few times, but the engine just sputters and dies. What’s happening? It could have something to do with the fuel cap. Most mowers have a vented fuel cap. This vent is intended to release pressure, allowing fuel to flow from the tank to the carburetor. Without the vent, the gas fumes inside the tank begin to build up, creating a vacuum that eventually becomes so strong that it stops the flow of fuel.

To find out if this is the problem, remove the gas cap to break the vacuum, then reattach it. The mower should start right up. But if the lawn mower won’t stay running and cuts off again after 10 minutes or so, you’ll need to get a new gas cap.

Clean and refill the lawn mower fuel tank.

An obvious—and often overlooked—reason your mower may not be starting is that the tank is empty or contains gas that is either old or contaminated with excess moisture and dirt. If your gas is more than a month old, use an oil siphon pump to drain it from the tank.

(It’s important to be careful as spilled oil can cause smoking, but there are other reasons this might happen. Read more about what to do when your lawn mower is smoking.)

Add fuel stabilizer to the tank.

Fill the tank with fresh fuel and a fuel stabilizer to extend the life of the gas and prevent future buildup. A clogged fuel filter is another possible reason for a lawn mower not to start. When the filter is clogged, the engine can’t access the gas that makes the system go. If your mower has a fuel filter (not all do), check to make sure it’s functioning properly.

First, remove the fuel line at the carburetor. Gas should flow out. If it doesn’t, confirm that the fuel shutoff valve isn’t accidentally closed. Then remove the fuel line that’s ahead of the fuel filter inlet. If gas runs out freely, there’s a problem with the fuel filter. Consult your owner’s manual for instructions on replacing the filter and reassembling the mower.

Inspect the safety release mechanism cable.

Your lawn mower’s reluctance to start may have nothing to do with the engine at all but rather with one of the mower’s safety features: the dead man’s control. This colorfully named safety bar must be held in place by the operator for the engine to start or run. When the bar is released, the engine stops. While this mechanism cuts down on the likelihood of horrific lawn mower accidents, it also can be the reason the mower won’t start.

The safety bar of a dead man’s control is attached to a metal cable that connects to the engine’s ignition coil, which is responsible for sending current to the spark plug. If your lawn mower’s engine won’t start, check to see if that cable is damaged or broken. If it is, you’ll need to replace it before the mower will start.

Fortunately, replacing a broken control cable is an easy job. You may, however, have to wait a few days to get the part. Jot down the serial number of your lawn mower, then head to the manufacturer’s website to order a new cable.

Check to see if the flywheel brake is fully engaged.

The flywheel helps to make the engine work smoothly through inertia. When it isn’t working properly, it will prevent the mower’s engine from working.

If it is fully engaged, it can make a mower’s pull cord hard to pull. Check the brake pad to see if it makes full contact with the flywheel and that there isn’t anything jamming the blade so the control lever can move freely.

If the flywheel brake’s key sheared, the mower may have run over something that got tangled in the blade. It is possible to replace a flywheel key, but it does require taking apart the mower.

Look out for signs that the mower needs professional repairs.

While repairing lawn mowers can be a DIY job, there are times when it can be best to ask a professional to help repair a lawn mower. If you’ve done all of the proper mower maintenance that is recommended by the manufacturer, and gone through all of the possible ways to fix the mower from the steps above, then it may be best to call a pro. Here are a few signs that indicate when a pro’s help is a good idea.

  • You see black smoke. The engine will benefit from a technician’s evaluation, as it could be cracked or something else might be worn out.
  • Excessive oil or gas usage. If you’ve changed the spark plugs, and done all of the other maintenance tasks, and the mower is consuming more than its usual amount of oil or gas, consult a professional for an evaluation.
  • The lawn mower is making a knocking sound. When a lawn mower starts making a knocking sound, something could be bent or out of alignment. It may be tough to figure this out on your own, so a pro could help.
  • A vibrating or shaking lawn mower can be a sign of a problem beyond a DIY fix. Usually something is loose or not aligning properly.

Honda Izy Mower. How to Adjust Carb?

Joined 13 Mar 2010 Messages 75 Reaction score 1 Country

Took a brave pill pulled the carb apart. There was some muck in the bowl so I cleaned it the jet as best I could. Now it starts but will only run relatively smoothly with the choke on. Back it off it hunts/pulses so I guess I need to adjust the mixture but can’t find any info.


Joined 7 Feb 2008 Messages 24,450 Reaction score 5,025 Location Northumberland Country

There are 3 jets on these engines. with the float bowl off, the main jet can be unscrewed from the central hole. On top of this jet. occasionally its the same brass bit. iis the emulsion tube, with holes drilled across its length. The pilot jet is not actually removable, its a drilling in the carb body. You’ll find the ‘tamperproof’ adjusting screw on the carb top. this only allows you to adjust the pilot mixture 1/2 a turn. I usually break the plastic bit away, and unscrew the pilot screw beneath, counting how many turns it is from fully in. Remove the white plastic float by sliding its pin out. with it will come the needle jet that allows fuel into the carb. Its vital that the needles seat is clean. After that, its a good blast throughout with compressed air and aerosol carb cleaner. please, no cloth or kitchen paper! Anyhow. the pilot jet is only used on tickover, the main jet is for full speed running, and the emulsion tube for the transition between the two, so the fault is likely to lie within the main jet, the emulsion tube or the float needle valve. John


Joined 13 Mar 2010 Messages 75 Reaction score 1 Country

Thanks, that’s much appreciated.

I pushed a small needle through the main jet that seemed clear. But I guess miniscule amounts of dirt could cause a problem given how small the jet is.

Should the emulsion jet just fall out of the body once the main jet is removed?

I don’t have access to a compressor, is an aerosol can up to the job?

Is Redex any good for these carbs?


Joined 7 Feb 2008 Messages 24,450 Reaction score 5,025 Location Northumberland Country

Depending on the age and engine fitted to your Izy, the brass central bolt that holds the float chamber on is the main jet. it has one hole drilled down its length, and another drilled across it to connect. Fuel from the float chamber passes through this jet on the way up to the emulsion tube. Peering up the emulsion tube hole, if you can see a screwdriver slot then undo it, and the tube slides out. Although compressed air is obviously the best, an aerosol carb cleaner will have to do. it should work. Take note that the float chamber actually has a step on it (usually) that the float drops into, so its worth marking its position! Don’t lose the rubber ‘O’ ring that seals the bowl to the carb body. The other screw in the float bowl is there to allow you to drain the float chamber if you need to. the slightest ingress of water at any time causes rusting in the float bowl. Redex (upper cylinder lubricant) isn’t needed in any way. unless you’re talking about a carb cleaner made by Redex! At the risk of sounding like a true anorak, you have one of the best machines around. John

Honda Lawn Mower Won’t Start – Beginners guide with pics

Honda makes reliable, well-designed, and constructed mowers. You bought one, so you already know this.

A gummed carburetor is the most common reason a Honda lawn mower won’t start. Other possible causes include:

I work on lots of Honda’s and major failures are very rare. Let’s begin by doing some basic checks. Sometimes this will solve the problem or at least point you in the right direction.

This guide will assume that components such as pull cord, throttle levers, etc. are working OK. If you think that this is not the case, I wrote a guide that covers all pull cord common problems – check out “Pull cord troubleshooting”.

Diagnosing a no-start Honda is pretty straightforward, carry out a few basic tests to eliminate ignition, fueling, and mechanical faults. Tests are not difficult, but you’ll need to execute them correctly to avoid burning time or replacing parts needlessly.

This post covers the subject pretty well, however, if you need video help, check out “Mower won’t start video”.

It covers the full diagnosing process and repairs of the most common causes of a no-start mower.

Check the Basics

If you need video help checking the basics, check out “Pre repair no start checks video”.

In the workshop, I find the majority of Honda mower engine problems are related to bad gas. Common symptoms of bad gas include, Honda won’t start, the engine starts then dies and engine surging.

Oil Level

Some Honda mowers won’t start if the oil level is low, this isn’t a flaw, it’s designed that way to protect the engine. It’s good practice to check the oil level every time you fill the gas tank. Check on level ground and with all wheels set to the same height.

The Honda will take.58 of a quart (.55lt) from empty. If you are in any doubt about how to check the oil, you’ll find this guide helpful – “How to check lawn mower oil”.

honda, mower, carb, adjustment, your

Check Oil – A Honda won’t like to be overfilled with oil either, this can damage the engine, cause it to smoke, leak oil and sometimes not start.

Gas Level

Is there gas in the mower? Sometimes the obvious is the solution, and as Sherlock Holmes says “we should check a fact is indeed a fact”. The customer may have filled the gas tank with what they thought was good gas.

At my shop, I have found many strange concoctions – diesel, water, white spirits, vinegar, and of course last year’s gas makes a regular appearance in the tank. The fix for bad gas – drain the tank and clean the carburetor. You might find this guide helpful, it walks you through the whole process – “Carburetor clean out”.

Gas Tap On

The fuel tap is used to cut the fuel supply to the carburetor. I tell my customers to turn off the fuel when the mower isn’t in use. It’s easy to forget to turn it on. Honda fit their fuel tap on the right-hand side of the engine when viewed from the front of the mower.

This short guide with pictures shows you where your gas tap is, what it’s for and when to use it. Check out “Where is my lawn mower gas tap”.

honda, mower, carb, adjustment, your

Air Filter

A blocked air filter will prevent the mower from starting. The Honda air filter needs to be kept clean, check it every 25 hours of use, and replace it every 100 hours. Honda fit tool-less air filter covers, which makes cleaning super easy.

The air filter cover is on the right-hand side of the engine, opposite the muffler. Cleaning the filter with compressed air would be nice, but banging on the ground will do just fine. This guide will help you service your mower in under an hour – “Mower tune-up”.

Plug Wire On

It’s easy for the plug wire to come loose, happens all the time. The plug wire lives right at the front of the engine, so it’s banging into shrubs and hedges and the like. It’s the black wire with the rubber boot on the end. Make sure it’s making good clean contact with the plug. Bad or no contact will give you a no start.

Choke On

I meet lots of customers who don’t know how to use the choke correctly, and I don’t blame them, it is likely they weren’t shown by the retailer. The choke is used to start a cold engine. A cold engine needs more fuel than a hot engine, so the choke creates a richer air-fuel ratio.

Some Honda’s will have the traditional choke lever and more modern mowers will have the auto choke set up.

Not sure if your choke is working? This guide will walk you through the testing procedure, see choke testing below.

If your mower doesn’t start on the 3rd attempt, it’s very likely the plug is saturated in fuel – a condition known as flooded. The fix is to remove and dry the plug or leave the mower for 30 minutes to dry out, then try again, this time without choke. Check out the Unflood mower video.

If you are in any doubt about how to start a mower, this guide covers it all, you’ll be a pro 2 minutes from now – “How to start a lawn mower”.

Choke On – Some Honda mowers are fitted with an auto choke and so the choke won’t be controlled by the lever.

Bail Lever On

The Bail lever or dead man’s lever is a safety feature. Its function is to stop the spinning blade within 3 seconds of release. It does this by shutting the engine off and applying a flywheel brake. If the bail lever isn’t held the mower won’t start.

This guide will walk you through testing for spark and how to change a coil, it’s simple. Only some Honda mowers will have the stop/start controlled by the bail lever. Other Honda’s have the stop/start control built into the throttle lever.

Check For Bad Gas

Bad gas is the number one cause of no starts. Your gas could be clean but stale, and mowers don’t like stale gas. Gas starts to go off after one month, it losses its ability to com-bust which causes poor performance and misfiring. When it goes completely stale, usually around 3 months old, it starts to solidify.

This has become such a big problem, last season I got a ton of questions about fuel carburetor cleaning.

Gas Stabilizer – It’s simple to use, just dump one ounce of gas stabilizer into 2.5 gallons of gas, fill your gas tank and run the engine to mix it throughout the fuel system, that’s it.

honda model hrr216k9vkaa lawn mower carburetor repair

This stuff will protect and clean your fuel system and can be used in all gas-powered kit including 2 stroke engines. See video here.

Check out the “Carburetor cleaning tools” page, it lists all the tools I use including the gas stabilizer.

Gumming – It’s a carburetor killer, using a gas stabilizer will prevent a lot of problems.

That’s all the easy stuff checked, now we’ll dig a bit deeper. Bad gas has become a real problem, especially in Honda’s, the carburetors are so sensitive to contaminated gas and for that reason, we’ll perform the gas shot test next.

Try The Gas Shot

Your engine needs fuel, spark, and compression to start. Fuel, Spark, and Compression are broader areas than their title suggests. Testing will take into account the complete system, for example, fueling is more than just the gas, it includes carburetor, tank, air and fuel filters, gas line, intake manifold, etc.

The most likely cause of a no-start Honda is fueling, and so we will start there. The next most likely is spark and the least likely of all is a compression issue.

To quickly test for a gas issue – bypass the fuel system. We do this by pouring some fresh gas directly into the carburetor.

If you need video help, check out “Mower won’t start video” which shows you how to nail this test like a pro.

The symptoms of bad gas vary: mower won’t start; mower runs rough; runs but only with choke; splutters when cutting on a slope; dies when cutting grass; lawnmower starts and then dies.

Remove – Remove the air filter, by pressing the two plastic tabs.

Tilt your mower over and pour a cap full of gas into the carburetor.

Pull – Attempt to start the mower in the normal way.

There are two possible outcomes –

(1) Mower attempted to start or started – tells us we have a fueling fault. Check out the Choke system test below(2) Mower made no attempt to start – then we’ve likely eliminated a fueling fault, and the fault will probably be a lack of spark. Check out the Ignition system test below.

Does Your Honda Need A Tune-up?

Your Honda engine should be serviced at least once per season, ideally in the spring. Tune-up kit includes: oil; plug; air filter; fuel filter (if fitted); new blade (optional).Your Honda engine will likely be a GCV 160 or GCV 190cc.

The service kits will be identical, however, Items such as carburetors and blades will be different. Check out “Mower tune-up guide”.

Buying the tune-up kit online is easy. You can find your model code right at the base of the handlebars, on the body of the mower. Honda mower engines are very common and so you won’t have a problem getting a tune-up kit to match.

Test The Choke System

Your mower won’t start if the choke is faulty. In this next step, we need to be sure the choke system is working correctly. The correct starting procedure for a cold engine will require giving it extra gas to enrich the fuel/air mixture which a cold engine needs for a smooth start. Honda uses a choke plate type system to achieve a fuel-enriched condition. Your mower won’t start if the choke is faulty.

The manual version will have a throttle lever to control the choke. The auto choke version won’t have a choke lever. Instead, a wax thermostat mounted in the cylinder head heats and pushes on a lever that opens the choke plate.

To test we’ll need to remove the air filter, this allows us to view the choke plate. If you have a manual choke control, move the throttle lever to the full choke position to start a cold engine.

Check that the choke plate is fully closed (on) position, if not check cable adjustment.

Your Honda may have an auto choke. If so, when cold, the choke plate should be closed, as per the picture. If not, move the plate by hand to see if it’s stuck. If sticking, try WD40.

When the mower has started, the throttle should be moved to the run position. Check that the choke plate is in the fully open (off) position as per the picture. If not, adjust the cable.

A sticking choke will run poorly and puff black smoke from the muffler. Your Honda may have an auto choke. If so when hot, the choke plate should be open, as per the picture above. If not, replace the choke thermostat at the muffler.

If you found no issues with your choke system, move on to clean the gas bowl.

The Problem With Ethanol Gas

Honda recommends not using fuels with more than 10% ethanol. Ethanol is an alcohol fuel made from sugar, corn, and other plant materials. This alcohol is then blended with gas to make ethanol.

It’s claimed that the alcohol content of the ethanol will damage the carburetor’s rubber seals and hoses.

E15 contains 15% ethanol and is not OK to use in Honda mower engines. E15 burns hotter than other fuels, your mower is not designed to run at these temperatures. Ethanol absorbs moisture from the atmosphere.

If the fuel is left in the mower over the winter, the moisture collects in the carburetor. The water will often corrode and leave a varnish type deposit that blocks up the ports. This is what causes the poor running/no start.

If you need help prepping your Honda for hibernation, check out “How to winterize your mower video”.

Gas Stabilizer

Regular gas older than three months is stale unless you use a fuel stabilizer. Ethanol fuels are stale after one month. Gas is the number one reason for a no start or poor running.

Using a stabilizer will prevent lots of these problems. As you know, you don’t have to use the stabilizer all season, but do use it towards the end and when winterizing the mower.

Treating your gas will save you downtime, hauling your mower to the shop, and in repair costs. If you need video help on the subject, check out “Adding gas stabilizer video”.

Stabilizer – Just dump a few drops into the gas tank, and run the engine. Simple!

Try Cleaning The Gas Bowl

Often just cleaning the gas bowl does the job. Removing the carburetor is a bit of a mission, so if cleaning the bowl gets us out of trouble, it’s worth trying. If you suspect stale gas, then you’ll need to drain the gas tank also.

You can drain the tank by removing the fuel line, but I use a Briggs and Stratton oil extractor instead, which makes the job a ton easier, you’ll find a link to amazon here on the “Small engine tools page”.

If the bowl cleaning doesn’t work we’ll need to remove the carburetor, clean it thoroughly and drain the gas tank.

Honda mowers are fitted with different sizes and types of engines. These engines will be fitted with different types of carburetors. Your carburetor may look different, but the process is the same.

If you need help, the “Honda mower surging video” covers the bowl draining and cleaning process.

In this part of the guide, I will remove just the fuel bowl, spray in some carburetor cleaner. You can find your fuel bowl behind the air filter. You don’t need to remove the air filter housing to access the bowl.

Remember, if your gas is older than three months, it’s stale. So cleaning the bowl won’t always make it go. You may need to drain the tank, carburetor bowl and fill it with fresh gas. If this works out for you, great!

If not, check out this guide it covers the whole process and includes pictures – “Carburetor cleaning”.

Pull Wire – When working on your mower remove the plug wire and turn off the gas. This prevents a spill.

Removing the 10mm drain bolt will drain the bowl, but won’t clear the grit from the bowl. I like to remove and clean the fuel bowl. Drain the fuel tank now, if you need to.

Turn on the gas to check fuel flow, if no fuel flows from the carburetor, move on to – Fuel flow test below.

Spray some carburetor cleaner up at the main fuel jet before refitting the bowl.

That’s it, test mower and if it’s still not right, check out “Carburetor cleaning”.

Try Cleaning The Carburetor

Okay, I will assume you have tried cleaning the fuel bowl as per the above guide without success. Now you need to remove the carburetor and clean it.

Have some carburetor cleaner or similar, a container for nuts and bolts, and take lots of pictures to help you remember where levers and gaskets are positioned.

There are a couple of different styles of the carburetor, yours may look a little different, but the process is the same. Some will have a manual choke, others will have an auto choke. Some will be more challenging to remove than others.

If you need video help check out “Honda mower surging video”. It covers both types of carburetors and guides you through the process of removing the carburetor, stripping, cleaning, rebuilding, refit and adjusting.

Here are some of the tools I use to clean carburetors, they’ll make the job a lot easier. “Carburetor cleaning tools”.

honda, mower, carb, adjustment, your

If you find carburetor corrosion or it’s badly gummed up, go ahead and replace it, because nobody likes doing a job twice. Replacement carburetors are not expensive.

Note that GCV 160cc and GCV 190cc carburetors look the same, but are different. So when ordering has your model number handy.

Check out “Lawn mower carburetor types”, it’s a list of common type carburetors

Carburetor Removal

Removing a Honda carburetor can be a little challenging. It’s not complex but there are lots of gaskets that must be replaced in the same order. In addition, the air filter housing bolts are also the carburetor bolts, so the challenge is to align gaskets, carburetor, and air filter housing before threading the bolts.

Take lots of pictures of gaskets and carburetor link positions. Layout your gaskets in an order that makes sense to you. All you really need here is patients. Buckle up!

Remove – Remove plug wire and turn off fuel as before. Loosen the bolt on the fuel bowl.

Loosen the air filter box/carburetor bolts (3) – two carburetor bolts and one air box bolt.

Use a suitable container for small parts.

Fitted to the back of the housing is a pipe which just pulls off, it’s the crankcase breather.

Take pictures of gaskets and locations.Remove 3 bolts and take more pictures of throttle link locations.

Set any loose gaskets aside, and in order.

Some gaskets will stick to the carburetor or other components and that’s fine don’t remove them.Gaskets must be fitted in the same location and orientation.

Drain Gas – If you haven’t already, drain out the old gas. Use a long flat screwdriver, pry off the gas line, removing the gas cap speeds up the draining process. Best to do this outside, gas stinks.

With the fuel line removed, you can turn the carburetor on its side to unhook the choke, throttle links, and spring. Don’t be tempted to bend the links.

With the carburetor free, move to a bench.

Strip Down – Remove bowl, float, and needle, this is done by pulling the pin. If your bowl is very corroded, go ahead and order a new carburetor as repairing rusty carbs isn’t worth the effort.

Check the needle tip, a worn tip turns pink. When these seal tips wear, they can cause either too much fuel flow or no flow. Replace needle or replace whole Honda carburetor.

Remove the main jet retaining screw. These guys are made from brass which is a soft metal. So a properly fitting screwdriver is essential, otherwise, the screw will be damaged.

The brass emulsion tube needs to be pushed free. Take a suitable screwdriver and push on it. It may need further encouragement, tap on the housing as per the picture until the tube is free.

Clean the portholes of the tube and thoroughly. I use a strand of wire plucked from a wire brush. The holes may look clean but are dirty. After you have cleaned them, they will be noticeably bigger. This allows more fuel to flow to the engine.

Spray all carburetor ports liberally with carburetor cleaner, fuel inlet, float needle seat, jet, throttle plate, choke plate, and any other ports you can see

Reassemble, fit the jet, screw, float, and needle. Careful when fitting the gas bowl, the large o ring can become pinched, apply some oil to help it seat. Don’t over-tighten the bowl, it causes it to leak.

Refit carburetor to the mower. Take special care when fitting the gaskets. Check your reference pictures. This bit gets overlooked, but it’s important. Clean out the fuel can and your gas tank.

Check the tank for grit and if you’re not sure the gas is good, replace it. Fill with gas and turn on the fuel. Fit spark plug wire, and you’re good to go.

Check The Gas Flow

This section deals with a lack of gas flow from the carburetor. The areas for consideration are gas cap; carburetor float needle seal; fuel filter; fuel tank; fuel lines.

If you have too much gas flow, the float needle is at fault, and yes you could replace the needle but often this doesn’t fix the problem. I like to replace the whole carburetor. This page list popular carburetors “Carburetor types”.

Small engine mowers use gravity flow to get fuel to the carburetor. Meaning the fuel tank should be higher than the carburetor. To test for flow make sure you are on level ground and have a minimum 1/4 full fuel tank.

Common reasons for no fuel flow are bad gas caps and dirty float needle seals.

The best way to troubleshoot no fuel flow is with the fuel bowl removed. A fuel tank needs to breathe. When fuel leaves the tank it needs to be replaced with air.

A sealed tank will prevent fuel from flowing. Remove the gas cap and check flow, if it now flows, replace the gas cap, it’s faulty.

Honda employs a mesh screen in the bottom of the fuel tank to filter the gas. Look into the gas tank, which is easier when it’s empty, and check the filter for grit. ​​I use a suction pipe to clean the bottom of the tank, however, sometimes you need to remove it to clean it thoroughly.

Check if the gas tap is the problem, remove the gas line to the tap and check flow.

honda, mower, carb, adjustment, your

Remove the float and check the needle seal. Use fine wire to clean out the needle seat in the carburetor. I use a strand from a wire brush.

Blow some into the needle seat on the carburetor. Fuel should start to flow.

Test The Ignition System

Spark is just as important as fresh gas. When it comes to spark, your plug is the first component to check. So be sure to have a good plug on hand. In this section, we will check the: plug; plug wire; coil; coil control wire; bail lever.

The test will require removing some covers. You don’t need any special tools to complete this test, but I prefer to use a spark testing tool and a plug gap tool. you can find both here on the “Small engine tools page”.

You can check out Ignition system testing and repairs here “Mower won’t start video”.

A video on testing and repairing the ignition system is included in the mower repair video library.

For this test you will need a spare plug, any plug will do for the test. But only fit Spark Plug (BPR6ES) to a Honda GCV 160 and 190.

You’ll also need a plug spanner, insulated pliers, and a very brave helper, who can withstand extremely high voltage……. I’m Joking, it’s only moderately high.

Spark Test

Note: The best way to test spark is with the In-Line Spark Tester tool or similar, as it will load up and stress test the coil. You’ll find a spark test tool listed on the “Small engine repair tools page”.

Remove the plug from the mower and put the plug wire back on the plug. Now hold the plug against the metal of the engine using the insulated pliers, take care to ground it well.

The helper now attempts to start the mower while you observe the plug spark. You should see a bright blue spark. If no spark, try the new plug.

Spark Test – There are 2 possible outcomes:

(1) No spark with either plug. If so keep reading.(2) Spark is good, if that is the case, check out “Carburetor cleaning” and if that fails run a compression test.

If you have no spark or your spark is poor you could have a faulty coil; spark plug wire; coil cap; a short circuit of coil control wire or poor bail lever cable adjustment. Look for obvious signs of damage.

Throttle Stop / Start

Most Honda mowers are fitted with stop/start control at the throttle lever and some have the bail lever stop/start, which is covered next.

The stop/start coil control switch seen here is mounted beside the carburetor. Check that the switch is being operated by the linkage when you set the throttle to the start position. If not, adjust the cable at the throttle lever.

Testing Throttle Switch – I don’t usually test these switches, because they don’t give trouble. So at this point, I would go ahead and fit a new coil.

However, you can test them by unplugging and repeating the spark test performed at the start of this guide.

  • If after running the test, the plug now sparks, replace the switch.
  • Still no spark, replace the coil.

Bail Stop/Start

This is the other type stop/start system, the bail lever, and is connected to the engine brake which incorporates a simple stop/start switch. When the lever is released a brake block pushes against the flywheel slowing the engine down. At the same time, the simple stop/start coil control switch is operated.Check that the switch is being operated when you pull the bail lever. If not adjust the cable.

Testing Bail Switch – At this point, I would go ahead and fit a new coil, because I have never fitted one of these switches. But you can test the switch by unplugging and checking for spark as before.

  • If after running the test, the plug now sparks, replace the switch.
  • Still no spark? replace the coil.

Replacing Coil

Coil Replacing – Your engine may look different but this process will be the same. Remove plastic pull assembly cover. Remove pull assembly held on by 3 nuts.

Fuel tank is now free, take this opportunity to clean it if needed, otherwise no need to remove the fuel line, just set it to the rear of the engine.

Remove – Remove two bolts that hold the coil in place. Remove the coil control push on wire connector, under the coil.

Fit Coil – Fit push on wire connector and bolt the coil in place, but don’t tighten yet.

An air gap must be maintained between the coil and the flywheel. A business card is just the right size. Push the coil snug against the business card and tighten the two bolts. Remove the business card. Rebuild in reverse order.

Don’t forget to refit the push-on wire connector and turn on the gas.Nice work!

Related Questions

Brand new Honda mower won’t start? The most common reason a new Honda mower won’t start is because the fuel tap is turned off. The tap is positioned just below the gas cap.

Other possible causes include:

Honda lawn mower troubleshooting self-propel? The Honda mower self-propel handlebar control operates by cable and the power from the engine is transferred to the transmission with a belt.

Common problems include:

  • Drive belt breaks (Replace cable)
  • Drive belt jumps off (Refit cable)
  • Weak or no drive – Adjust cable on l/h handle bar
  • Mower hard to pull back-ways – Cable over adjusted (Adjuster on l/h handlebar)

John Cunningham is an Automotive Technician and writer at

He’s been a mechanic for over twenty-five years and shares his know-how and hands-on experience in our DIY repair guides.

Johns’s fluff-free How-to guides help homeowners fix lawnmowers, tractor mowers, chainsaws, leaf blowers, power washers, generators, snow blowers, and more.