Filling the line into the trimmer The line feed system from the trimmer is manual, semi-automatic and automatic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30).
We fill the line in the trimmer.
I want to devote today’s article to the sore subject of summer residents and gardeners of the entire post-Soviet space How to fill the line in the trimmer. Not many trimmer manufacturers answer this question in their instruction manuals. Therefore, it is difficult for simple gardeners to figure out how to do it correctly.
I want to start with a brief description of the technical characteristics of the trimmers.
So, trimmers are electric and gasoline. The cutting element for trimmers can be a line and a knife. The line is ordinary, four. Pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and 4 bladed knives. There are also plastic and metal knives.
The line feed system from the trimmer is manual, semi-automatic and automatic.
The development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the line and the number of knife blades, according to the power of the trimmers. Otherwise, the motor is overloaded, resulting in damage. And these are additional and significant costs.
Trimmers on the market today:
With one nozzle only with a line.
With two line nozzles and three-four-blade knife.
With one nozzle only three-four-bladed knife.
Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing line. But at the same time, they do not think about the safety of their own and their loved ones, because, like a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave him crippled for life. Using a fishing line can and gives a better effect, I have never personally tried it than a trimmer line, but such work has a number of inconveniences: when it comes into contact with hard objects, it loosens or can simply be pulled out of the reel without limit.
So, what is called closer to the topic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30). Everything is very simple. We started.
After you have chosen the line for refueling, you need to cut off the required amount of line, because all the line in the skein will not be wound into the reel.
Cut off and start winding.
Remove the coil and the protective cover from the coil.
They took it off. We fasten one end of the line into the gap and carefully and evenly wind the line.
The amount of line should be such that the protective cover of the reel closes and the line on the reel unwinds a little by itself.
We put the other end of the line into the hole in the protective casing.
Next, we take the coil and the protective cover of the coil. We squirt the end of the line from the reel into the metal hole on the protective cover of the reel. We tighten the line a little.
We put it all on the trimmer. Turn the coil clockwise until it clicks.
They fixed it. Now we connect the trimmer to the network. We put the trimmer in the starting position for work. We turn on the trimmer. Excessive line length will be cut with the trimmer blade.
Coil in trimmer
That’s all we start working.
Thick line
It is stored at the top of the trimmer body.
Material you can see
A little advice. Try not to let the line come into contact with hard objects when cutting. With this contact, the line will be cut. And since in this trimmer the line is not fed automatically, then every time you have to stop work, remove the reel and release the line again.
Thick line
It is stored at the top of the trimmer body.
In addition to the standard lawn line, my trimmer has a thick line for cutting rough weeds. It has the shape of a pigtail, i.E. Three lines are tightly intertwined. This line has its own spool.
We fill the line in the trimmer.
I want to devote today’s article to the sore subject of summer residents and gardeners of the entire post-Soviet space How to fill the line in the trimmer. Not many trimmer manufacturers answer this question in their instruction manuals. Therefore, it is difficult for simple gardeners to figure out how to do it correctly.
I want to start with a brief description of the technical characteristics of the trimmers.
So, trimmers are electric and gasoline. The cutting element for trimmers can be a line and a knife. The line is ordinary, four. Pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and 4 bladed knives. There are also plastic and metal knives.
The line feed system from the trimmer is manual, semi-automatic and automatic.
The development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the line and the number of knife blades, according to the power of the trimmers. Otherwise, the motor is overloaded, resulting in damage. And these are additional and significant costs.
Trimmers on the market today:
With one nozzle only with a line.
With two line nozzles and three-four-blade knife.
With one nozzle only three-four-bladed knife.
Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing line. But at the same time, they do not think about the safety of their own and their loved ones, because, like a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave him crippled for life. Using a fishing line can and gives a better effect, I have never personally tried it than a trimmer line, but such work has a number of inconveniences: when it comes into contact with hard objects, it loosens or can simply be pulled out of the reel without limit.
So, what is called closer to the topic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30). Everything is very simple. We started.
After you have chosen the line for refueling, you need to cut off the required amount of line, because all the line in the skein will not be wound into the reel.
Cut off and start winding.
Remove the coil and the protective cover from the coil.
They took it off. We fasten one end of the line into the gap and carefully and evenly wind the line.
The amount of line should be such that the protective cover of the reel closes and the line on the reel unwinds a little by itself.
We put the other end of the line into the hole in the protective casing.
Next, we take the coil and the protective cover of the coil. We squirt the end of the line from the reel into the metal hole on the protective cover of the reel. We tighten the line a little.
We put it all on the trimmer. Turn the coil clockwise until it clicks.
They fixed it. Now we connect the trimmer to the network. We put the trimmer in the starting position for work. We turn on the trimmer. Excessive line length will be cut with the trimmer blade.
How to wind the line onto the trimmer spool
The trimmer is a great solution for those who have a large garden or lawn near the house that needs to be constantly trimmed. But like any other tool, sometimes it requires intervention. After some time, it will become necessary to replace certain elements, and this will have to be learned.
How can this be done? To replace the main cutting element, you must first select it correctly. In principle, the instruction manual for lawn mowers should indicate the diameter of the thread to be used in it.
When you have acquired the required cutting element, try to install it correctly. It should be noted that there is a huge amount on the Internet that will help you figure out how to properly thread the line into the trimmer reel.
How to change line on a trimmer
Below we have provided step-by-step instructions for replacing the trimmer thread.
The first thing to do is to unplug the power tool and turn off the engine. Then you need to remove the trimmer head. This can be done using a simple screwdriver and dropping it into the hole of the gearbox to prevent the shaft from turning. And then just unscrew
They are usually unscrewed in a clockwise direction, but different models have different mechanisms, so it may have to be turned in the opposite direction. But if suddenly, for some reason, you cannot figure it out, then we strongly recommend that you refer to the user manual to understand how to disconnect it
Second. After removing the mowing head, open it. This can be done by means of the latches that are located opposite each other. By pressing on them, you can remove the head cover, and then pull out the spool on which the line is wound. By pulling it out, you can determine what type it belongs to. There are one-piece and two-piece bobbins
We analyze how to thread the line into the trimmer coil in two versions
So, option one, we load the line into a one-piece reel. The prepared piece of thread is folded in half and pushed into the spool. Then, we begin to wind both ends in the same direction, which will be indicated by the arrow on the spool. At the end of the winding, do not forget to make sure that different ends of the thread are looking in different directions.
Option two line winding two-piece reel. The pre-prepared thread is divided into two parts, and its ends must be fixed: this must be done by placing them in special fasteners
Winding is carried out, as in the first case, along the arrow indicated on the spool. Both segments should be wound so that they do not cross. Further, the ends of the thread should be fixed in the grooves and divorced on opposite sides.
The spring is then inserted into the reel and the whole thing is placed in the mowing head. When placing the spool in the trimmer, you need to gently hold the spring parallel while inserting the line into the slots on the mower head. And in the end, it just needs to be secured with the final part, that is, with a lid.
After threading the trimmer, you need to check it. If you did everything correctly, everything will work, but if you make a mistake, we recommend that you read the article again, or even better, if you look at how to install the line on the reel in the trimmer.
How to remove the line from the trimmer spool
Over time, the cutting element of the head wears out, and it becomes necessary to pull out the remnants of the old line. Not everyone knows how to do this. Our step-by-step instructions plus how to remove the thread from the trimmer spool, which you can find on the net, will help in solving this issue.
It is necessary to disassemble the mowing head
Remove the cover using the clips
Cleaning up the remnants of cutting material
Complicated ? Of course not. But if, nevertheless, doubts creep into you that for some reason you cannot do this, then of course find and see how to pull out or how to wind the thread on the spool of the lawn mowers.
How to replace the line on an electric trimmer
In fact, it makes no difference which oblique you use, be it electric or gasoline. Threading is the same. The only difference is that if you use a gas streamer, you get more freedom, since you are not limited by the cable that is present on the electric streamer.
Yes, do not hesitate to use special rollers for setting or threading the line in an electric scythe, which can teach you much faster than simple reading.
How to wind the line on the trimmer correctly
A garden trimmer is a useful tool that makes life much easier for any gardener or private house owner. The grass just rushes in the summer, especially after the rains, so you can’t go without it. But over time, sooner or later, the line in it will end, and it will be necessary to insert a replaceable skein of new line. Some summer residents are at a dead end how to do it yourself? So our article will help them.
Changing the line on the trimmer
This article will tell you how to change the line on a trimmer. For some people, this job may not be easy. But the step-by-step instructions that are available here will help you in this matter.
So the first thing to do is remove the gear cover. We combine the hole on the side of the curly lower washer and the axial recess, insert a screwdriver to fix the shaft from scrolling. Now unscrew the nozzle. The thread on the shaft, as a rule, has a reverse thread, take this into account when unscrewing.
Next, disassembly of the nozzle follows. There, the cover is fixed with latches through the holes. So you just need to push these clips into the holes and the cover will come off. If the attachment has an automatic / semi-automatic line feeding mode, it means that there is a spring inside, which can simply fly out when the cover is opened, be prepared for this. We lay out all the removed parts neatly in order.
Now it’s time to take the line and unwind 5 meters from it, cut off this piece. Pay attention to its thickness, do not wind a line of greater thickness on the unit than specified in the manual for the tool. Otherwise, there will be an increased load on the engine and a higher fuel consumption during operation. We bend the measured line in half to find the middle and get a loop.
There are a couple of notches in the middle of the coil, sometimes they are not notches, but holes located opposite each other. We cling to one of the grooves with a loop and wind the fishing line counterclockwise. If the reel has 2 compartments, then we wind each end of the line on them separately. Leave the last 15-20 cm free and clamp them while in the recesses of the coil.
We assemble the device again, pull the free ends of the fishing line into the holes on the body. We put on the lid, snapping the latches into their grooves. Now you can pull out those loose ends of the line.
It remains only to attach the working node in place, as in the first paragraph. Do not forget to reverse rotation on screwing.
Now you can learn how to wind the line around the trimmer. Actually, the whole process was detailed above. No time-consuming operations requiring the presence of specialists. Your lawn mower is ready for use again.
How to properly wind the line on the trimmer spool
Many, having worked out the factory line on a recently purchased trimmer, try to wind a new one, but cannot, because they do not know how to properly wind the line on the trimmer spool (bobbin). It seems that there is an instruction, but it still does not work. Let’s try to deal with this issue in this article.
So, in order to wind the line, you first need to remove the coil from the trimmer so it will be more convenient. Removal method will depend on the type of trimmer.
Removing the coil from the trimmer
On small, bottom motor electric trimmers (when operating near the ground), the reel usually has two buttons on the sides. Click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is also taken out, on which the fishing line is directly wound. When disassembling, be careful: there is a spring inside that can fly out and get lost.
On electric and gasoline trimmers with a curved bar (there is still no way to put a knife on such trimmers), you need to wrap the coil body itself with one hand, and with the other hand you need to start rotating the lamb on it counterclockwise. It is he who attaches the coil to the trimmer bar. Having unscrewed the lamb, carefully remove the entire coil, trying not to lose the spring inside.
On electric and gasoline trimmers with a straight bar and a gearbox at its end (on such trimmers, in addition to the fishing line, you can also install a knife), we look for a hole under the coil, insert, for example, a screwdriver into it, quietly rotate the coil until the screwdriver crawls even deeper, and the coil will lock. Now we turn the whole coil clockwise (since the thread is left-handed) and remove it from the trimmer. Then we disassemble the coil. It can be assembled with latches or twisted with a lamb. If the coil is latched, then press on the sides on the base of the latches so that they bend and release one half of the coil body from the other. We just unscrew the lamb. There may also be a third type of connection of two halves of such a coil: with it, you need to grab the lower part with one hand, and the upper part with the other, and begin to turn them in opposite directions. When disassembling such a coil, you must also make sure that the spring inside is not lost.
than 200 types of trimmers in one place at the lowest prices. Click and watch
Now, having removed and disassembled the coil, we proceed, in fact, to winding.
Things to consider when choosing a line
It is important to select the right material before inserting and locking the line into the detachable trimmer spool.
Related article:
Rating of the best petrol trimmer models. An overview of manufacturers and models, as well as useful tips from experts reviewed in this review, will help in a difficult choice among many device models.
By size
Before winding the thread on the trimmer spool, you should pay attention to its size. Most often, a line with a cross section of 2 mm is used.
You can choose a suitable diameter in the following ways:
- See the manufacturer’s instructions for the trimmer for recommendations.
- Manufacturers often apply cross section information to the bobbin.
- The cross-section of the cord must match the diameter of the spool hole.
How to wind the line around the reel of the double barb trimmer
You can look before work, and also take into account the following recommendations.
- If there is only one track, both threads are wound in parallel.
- If there are two tracks, each section is wound in a separate groove.
- Wind the threads in the opposite direction to the rotation of the head.
- The length of the free ends should not exceed fifteen centimeters.
- Thread the ends through the outlet holes.
- Assemble the head and check the trimmer performance.