How to choose a fishing line for a trimmer for a mower. Ryobi RAC105

TOP-10 best forests for trimmers: pros and cons, reviews

Trimmer for grass is one of the most important and necessary things of every amateur gardener. It helps to maintain the site in a neat appearance. Various types of devices are presented on the market, but at which to stop your choice? The article will tell you how to choose the best fishing line for a trimmer for a trimmer for grass in order to quickly and efficiently mow grass, its features, proven manufacturers, advantages and disadvantages of their products. The article includes a rating of the best forests for trimmers according to experts and customer reviews.

The fishing line for trimmers is classified according to the following signs:

• The thickness of the thread. You can learn about thickness from the technical data of the device itself. Each unit requires a fishing line for a trimmer of a certain diameter. If the device is electric, it needs a 2 mm thread. The gasoline trimmer for the grass should be seasoned with fishing line with a diameter of 2.4-3 mm.
• The shape of the section. Usually preference is given to a fishing line with a round section. It is affordable, besides, she copes with fresh grass perfectly. The main minus is the noise that comes from the working device. Manufacturers also produce a fishing line for a cross.section trimmer. The rectangular shape can be seen much less often. A two.component twisted fishing line for a trimmer is produced, which is used for mowing of dryness. Its feature in the fortress and resistance to ruptures. The disadvantage is the price.
• The composition of the fishing line. On it you can determine the service life of the model. Often there is a fishing line for a nylon trimmer. It gradually wears out, effective at large loads. Coaxial fishing line for a trimmer is considered one of the strongest. It is difficult to cut it with a knife, in the process it makes a minimum noise. Mainly use utility workers.

Review: “I bought a coil. According to the instructions, I put it in a braid and everything worked. I checked the quality of work first on small grass, then at a higher. My conclusion. a fishing line for a trimmer is suitable for fresh small grass so that the thread does not break and does not soften. The best option of all proposed “.

Champion Spiral Pro C5051

The fishing line for trimmer is used when working with any trimmer. Produced in different types and diameters. Correctly selecting a fishing line for a trimmer, you can increase the efficiency of a certain spectra work. It is a mononymous with a cross.sectional cross. Characteristic features: wear resistance and excellent cutting ability. Suitable for thick weed, thickets of hard grass. Made of high.quality materials, has a long service life.

Review: “They advised you to buy a fishing line for a trimmer of this model. I bought for a summer residence and glad that I did just that. Trimmer for grass copes with thick grass and young shrubs. There is enough skein for a long time. In a collision with stones or stumps, it does not break ”.

Echo Round Line

Spit strings have high strength, made of high.quality materials of polymer resins using tensile technology. The line of fishing line is durable and resistant to solid surfaces. It has a round shape. Used for mowing medium and low grass. There is enough skein for a long time. Changes easily and refuel.

• strong thread;
• does not break the exit on the coil;
• easily installed;
• Suitable for all models of a trimmer for grass;
• Compact.

Review: “For the season of summer cottage work, the skein was enough with the head. Repeatedly had to mow grass not only in the summer cottage, but also in the open territory. I have no complaints and Комментарии и мнения владельцев. I coped with work perfectly “.

Rezer Dual-Cut 30064

The model is intended for professional activities. Cales with the span of thick weeds. Made of durable materials, which increases its wear resistance. It has a square section. A trimmer fishing line is sold in a convenient penalty possible, where it can be stored until completely used. Length is enough for a long period. Tested by specialists on various types of plants.

Review: “Good fishing line for trimmer. I use it not so long ago. Often you have to mow grass, so I chose this particular model. I showed myself well in work. I coped with different types of grass: both soft and hard ”.

Siat Professional 556010

Professional nylon fishing line for trimmer. Has high strength and flexibility. It is made of high.quality material, so it is suitable for any type of trimmer for grass. Wear.resistant, single diameter for the entire length. The manufacturer offers a wide selection of colors, sections and diameters. With prolonged storage and low temperatures, it does not lose its qualities and does not relax. Effective in work even with high loads.

Review: “The fishing line for the trimmer showed herself from the good side. In a few minutes, squinted the grass throughout the site. Easily referred, did not need third.party help. Fine fishing line acceptable “.

Patriot Starline Star

Starline trimmer fishing line is made of polypropylene. Has elasticity, flexibility, heat resistance. Types of section allow you to choose a fishing line for a trimmer for mowing the desired diameter and type. Copes with vegetation of different types. Sold in convenient packaging. It has a bright design. Designed for mowing grass at a professional and amateur level. Does not create much noise compared to other models.

Review: “I bought for a summer residence. In a small area quickly managed with dry and fresh grass. In the process of work, the fishing line for the trimmer was not torn and did not stretch. Motka is enough for more than a year “.

Denzel Flex Cord star

This fishing line for trimmer is used as cutting material in electric and gasoline trimmers. Made of high.quality nylon with the shape of the “star”, so it is characterized by increased wear resistance. Due to the sharp faces of the trimmer fishing line is suitable for mowing grass of different stiffness, as well as young shrubs. It is recommended to work with powerful trimmers. The fishing line for the trimmer is durable, elastic, offered in different lengths and diameter.

Little line for a trimmer of large and small section and when to use steel discs

If the fishing line for the trimmer is not suitable for the generator, the following consequences may occur:

• If you put on a low-power electric trimmer for grass a fishing line for a trimmer with a section of 2.6-3 mm. You will reduce the efficiency, continuous wrapping of the fishing line on the spool will occur, and the load on the engine will increase, which will cause its accelerated wear.
• If you use a thin fishing line for a trimmer in a powerful gasoline trimmer, a trimmer fishing line will wear out faster, reducing the performance and efficiency of cutting.

Monophy is made of such material as nylon. This is a material that provides high reliability and has good cutting properties. Why use a fishing line for a trimmer in a coatist, if there are metal disks? This question is asked by many masters.

• A fishing line for a trimmer or a fishing line for a trimmer on a tool is used when mowing vegetation, where there are various obstacles. stones, pillars, benches, trees, etc.D. Flexible equipment in a collision with such obstacles will only wear out faster, but will not overload the engine engine.
• Metal discs are designed to overcome any difficulties of relief. They effectively mow thick and thick.nisted vegetation. In a collision with obstacles, the teeth are quickly blurred, and the drive mechanism is overloaded

Knowing the difference between steel disks and cord, it is easy to decide what is better. Trimmer fishing line is sold in stores in 15-meter coils. On the rogue you can wind up to 4-5 meters of fishing line depending on its diameter. To save space, you can purchase a fishing line for a trimmer for a trimmer for grass in a coil of 250 meters or more.

It is interesting! When choosing a line for a chainsaw, check the manufacturing date. This is done in order to exclude the possibility of acquiring obsolete material. Nylon is inclined to shrink and loss of its original characteristics. If the rope was stored for a long time, do not throw it away, soaking in water or lubrication will allow it to return the previous technical properties.

Varieties of fishing line in shape. what it affects and why they are different

Initially, a fishing line for a trimmer was available only in a round form, but since then other species began to appear, such as square, hexagonal, starry and others. They also differ in color, but the color does not matter here, with the exception of the visibility of cutting equipment during operation.

The shape of the line affects the type of mowed grass. When it comes to form, strings enter the game:

• Square or hexagonal. Sharp angles allow you to better cut off the vegetation, which should be taken into account when working on large areas
• Ribbed or star.shaped. They are even more effective when cutting various types of stems and reduce the load on the engine
• Round. This is a common form, which is also considered universal. Round cords are divided into smooth and curtailed. While a smooth cut is characterized by a loud move, a twisted cut, on the contrary, quieter, but there is a faster wear.

Some masters replace the fishing line for a trimmer with a steel wire or a metal cable after its wear, which is unacceptable. The wire is not only capable of cutting out narrow shoes of the mowing, but can also be wrapped around the head, causing its jamming with the shaft. The jammed head will lead to the wear of the gearbox and the drive mechanism.

How to choose a fishing line for a trimmer for a trimmer for grass and motorcycles

The lawn mower and an electric trimmer for the grass are excellent assistants in the care of lawns and hedges in the summer cottage. These simple garden devices are gaining more and more popularity among happy owners of summer cottages. Some buy a trimmer for grass instead of a lawn mower (for small lawns it is quite enough), owners of extensive lawn expanses complement the lawn mower with a trimmer or motorcycle. Most household models of trimmers and motorcycles use a fishing line for a trimmer as a cutting element. The correct selection of fishing line ultimately is responsible for the effectiveness of work and the quality of the trimmer work for the grass.

Each separate model of a trimmer for grass works with a trimmer fishing line of a certain diameter. The recommended fishing diameter can vary in a small range, or be clearly defined. In any case, these numbers are always indicated in the operating instructions, and using a fishing line for a trimmer of smaller or larger diameter is pointless and fraught with breakdowns or simply ineffective work. Too thin fishing line for a trimmer will break, and a thick can overheat the engine. We always recommend that you carefully read the instructions and choose a fishing line for a trimmer only recommended diameter.

The diameter of the used fishing line and its shape depend on the purpose of the trimmer itself for the grass.

The round fishing line for trimmer is most universal and well copes with lawn and wild grass, but it is less effective for caring for bushes. It is such a fishing line that is usually equipped with trimmers for grass and motorcycle manufacturers, it is easiest to choose in the store. It is unlikely that anyone will have doubts that a fishing line for a trimmer for trimmers Stihl 2.0mm15M is suitable for trimmers Stihl.

A fishing line for a trimmer with a variety of cross.section (square, pentagon, asterisk) is good for well.groomed lawn grass, thanks to sharp faces, it cuts off the stems better, but abrasions more than the round. Therefore, you should choose a fishing line for a trimmer with a cross section of increased strength, for example, a fishing line for a trimmer Hammer Tl Square Dual Cut 2.0mm x 15m. You can also find a fishing line for a trimmer with notches, designed for electritrimmers and a fishing line for a trimmer of complex forms for professional models.

If you have doubts about whether this or that fishing line is suitable or not suitable for your trimmer trimmer model, it is better to read the instructions or call the certified service center, the phone of which can be found on the tool passport or on the Internet. Consultants of specialized stores, such as chain of stores of power tools and garden equipment “220 Volt”, which presented a wide selection of fishing line for trimmers and motorcycle, will also help with the choice.

For the effective operation of the lawn mowers, you need to pay off high.quality threads of trusted brands. There are many manufacturers whose fishing lines are popular at the expense of their many advantages:

• “Oregon”. a world manufacturer of various equipment for garden equipment. Fishing lines are produced for both household and professional use. A large range of threads for high.quality lawn mowers is produced.
• “Husqvarna” is a well.known brand of garden equipment with extensive experience that produces all types of forests for lawn mowers.Threads have a special classification by color solution depending on the diameter. The manufacturer is also patented by the sewn.out processing of threads, which makes them stronger and more elastic.
• Champion is a relatively young manufacturer who has established itself in the market thanks to high-quality garden equipment. Produces fishing lines for a trimmer for grass of all types with high wear resistance and strength. There is a yellow and red series of threads with different sections.
• Dolmar is a popular manufacturer who has been producing various garden products for more than half a century. Filas for a trimmer for grass are distinguished by high technical characteristics. You can purchase fishing lines of this company both for working in well.groomed lawn areas, and for cutting launched grass.

Trammer Fine for a trimmer for grass “Champion”

A properly selected fishing line for a trimmer for a trimmer for grass will allow you to cut not only soft grass, but also hard, dry.

Does Greenworks trimmers have automatic fishing line feed?

Greenworks trimmers on most models have a semi.automatic fishing line. This means that when working with a mower, you do not need to completely stop the work of the tool. It is enough to place a trimmer for grass on a solid surface, press 1-2 times on the head of the coil and the fishing line for the trimmer itself will increase in the length.

The exception is the line 24V. in which only manual fishing is provided. If you need to lengthen the string, you need to completely stop the operation of the tool, turn over and, by pressing the button several times, manually stretch the fishing line for the trimmer from the spray.

Consider the garden equipment and compact manual tools of the GreenWorks 24V line and figure out how to choose the right tool to solve any problem!

Choose an ideal snowmaker for your tasks! We will analyze how the models of the GreenWorks snow removal technique differ and how to choose a suitable tool.

We represent the first self.propelled battery in the Greenworks line of equipment! We will figure out how the model works and what are its advantages.

How to choose a suitable fishing line for a trimmer?

For trimmers working both from electricity and gasoline, nylon fishing lines are suitable. This consumable can be used for both a hand tool and for a lawn mower on wheels. It is important to choose the right fishing line for a trimmer, as this directly affects the result of the work and the service life of the unit. Of course, in the proposed assortment of forests it is very easy to get confused, especially beginners. However, there are many tips from specialists and those who have already tried various options.

For an electric trimmer for grass with a capacity of less than 500 W, a thin fishing line for a trimmer with a diameter of 1 to 1.6 mm is suitable. She will perfectly cut the lawns with low grass. If the tool power is in the range from 0.5 to 1 kW, then it is better to give preference to a fishing line whose diameter will be 2 mm or slightly larger.

This will be enough to mow thin grass or grown weeds, but not too thick.

For gasoline trimmers, as well as motorcycle, you can not take a fishing line for a trimmer less than 3 mm. Such a thickness will easily cope with any weeds, dry stems, thick grass. A diameter of more than 4 mm is suitable exclusively for gas troops with high power. It turns out that a thick fishing line for a trimmer is necessary for powerful equipment. It is not recommended to use it for low.power trimmers, otherwise it will work poorly, constantly wound on the coil and create an additional load on the engine.

As a rule, in standard packaging is up to 15 meters of fishing line. However, to replace the string on the coil, about 7 meters long enough. It also happens that a fishing line for a trimmer is produced by bays of 250-500 meters. Be sure when choosing a string, you need to clarify the date when it was made. Too old nylon can be dry and become too brittle. If this happened, then you can soak the fishing line for a trimmer for a couple of hours in water, but it will not be completely the same.

When choosing an important parameter, the section of the string, which is of several types.

Round section is universal. It is used for mowing grass of medium thickness and density. When working can be unnecessarily noise, but it is not used too quickly.

Square or polygonal section is more effective compared to round. Thanks to the sharp corners, the stalks of plants are cut off at a higher speed and better.

Ribbed, twisted and star.shaped section is the most effective. Such a fishing line manages to mow the grass very quickly. And its main disadvantage is to quickly wear.

The fishing line for a trimmer for a trimmer for grass is made of nylon, which is durable, light, low price and wear resistance. To make the cost of the material even cheaper, polyethylene is added to it, but then the fishing line for the trimmer overheats faster. In thick strings there is a rod made of graphite or steel. Sometimes they are reinforced, which increases the strength and service life.

It is worth noting that the for two.component strings are higher than for standard nylon.

The device is in a mower

In the trimmer, the element on which the string is pulled is very simple. It is called the “coil”. Usually it consists of the upper and lower part (grooves), between which a partition with a deepening passes. It is on these grooves that you need to wind a fishing line for a trimmer. However, before it is extended through the recess.

Before pulling out the coil, you should twist a special button located directly on the housing of the lawn mower. Before changing the fishing line for the trimmer, it is necessary to remove the coil from the mowing.

It is easy to do this, but there are features depending on the configuration of the trimmer for the grass and the coil itself.

In small electronic braids, the motor and coil are in the lower part, and buttons are located on the sides of the bobbin. If you press them, then get the upper groove of the coil and part where you need to wind the fishing line for the trimmer.

In lawn mowers with a curved bar, which are not provided for a knife, the coils have special two.horned nuts. In such tools, you need to hold the bobbin so that it does not move, and at the same time turn the nut out of clockwise. It is she who holds the whole bobin, which after that is easy to remove.

Direct rods on which you can install a knife have a hole right under the bobin. To remove the coil, a screwdriver is located in this hole, the bobin is fixed. After that, you need to turn the coil on the movement of the clockwise and remove from the unit.

Sometimes clamps on the coil in the form of latches may occur. They must be pressed to disconnect parts of the coil. The option is also possible when the top and bottom of the bobbin are connected by thread. In this case, it is enough to take your hands on the top and bottom, and then twist in different directions until they develop.

Field parameters

The main characteristics of the forests for trimmers are:

Thickness

You can find out about the thickness of the thread for your device if you read the operational characteristics of the trimmer for the grass. If, for any reason, the characteristics are lost, you can always navigate in accordance with the notes on the universal bobbin. As a rule, trimmers use threads with a diameter of 1.2-4 mm. However, in many devices, the thickness of the thread is different.

It is not forbidden to operate a fishing line for a trimmer less than declared by the manufacturer of your trimmer for grass. you will not break the gun instantly, but significantly increase the speed of engine wear. If the thread is thicker than necessary, in this case, the engine of the trimmer for the grass will work in an enhanced mode, respectively, overheat, and after some time it will break. You need to take into account that a lot also depends on the engine itself.

By the type of engine itself, it is possible to easily determine the approximate size of the fishing line. If the power of the unit, which is connected to the network or is powered by a built.in source (conventional battery), approximately 1 kW, in which case you should purchase a fishing line for a trimmer 2 mm thick with a thickness. In the case when the power is less than 500 W, the thread should be used in its thickness not more than 1.6 mm.

The shape of the section

Often they try to choose a fishing line for an electrocos or trimmer for grass with a “round cross section”. This type is very common, while inexpensive. Fresh grass with this thread will be excellent slide. A distinctly audible noise that will be published by a trimmer with such a fishing line during work. its main drawback. The level of this noise can be compared in strength with the noise of the very engine of your apparatus. If you want to minimize the noise volume from the fishing line. use a thread with a spiral cross section. There are many more types of sections of threads for benzos with different principle of operation (gasoline or electric).

The best of them: star, square and rectangular. The more the threads you choose will be all sorts of Zazubrin and pointlessness, the better it will cut.

The composition of the fishing line

How much a fishing line for a trimmer will last you depend on its composition. Most often, manufacturers use nylon. Fishing lines from this material freely withstand high temperatures without losing efficiency, and are also elastic, which will not allow them to easily break. Like high, low temperatures also do not affect nylon, the thread from this material will last you long.

Fishing lines belonging to the coaxial group are one of the strongest. These threads wear out for a very long time, as they have a firm core. Its main advantages are the highest fortress, as well as a very low noise level (it is much higher for nylon). Recently, you can find fishing lines in which manufacturers make aluminum inserts.

Tips for choosing fishing line for a trimmer for grass

Coil. the main component of motorcycles. For a bevel of grass, it is equipped with a special fishing line. This very fishing line for a trimmer can serve you for a very long time, if you do not regret it (fishing line for a trimmer for a trimmer for grass. what you should not save on). Currently, you can find different cutting threads that differ in their cross.section, composition and thickness. Often a fishing line for a trimmer is sold in small or large skeins in specialized stores. If you want your mower to serve you for a long time, approach the choice of fishing line with full responsibility (because due to the wrong choice you can even break your device).

• Never choose a thread for “save”. Having bought the cheapest and, obviously, the most low.quality fishing line for a trimmer, you can lose much more. As a rule, the best parameters are indicated on cheap (“Chinese”) fishing lines, but in fact they are completely different. The consequences of buying the cheapest threads can be both a breakdown of the thread and the fact that the lawn mower will fail. If the coil quickly fails, you will have to replace it again, which means you spend even more money.
• Buy fishing lines only in specialized stores or from sellers, in which you are 100%sure so as not to be deceived.
• Always check the authenticity of your fishing line. It’s no secret that the goods can fake, and the coils are no exception. If you decide to buy a high.quality brand thread that will last you for a long time, look for special holographic signs or codes on its package. With their help, you can easily check the authenticity of the fishing line.
• In addition to the advice above, if you choose a high.quality brand for long work, choose a fishing line for a trimmer from German or Japanese manufacturers.
• If your lawn mower or trimmer for grass has its own production of forests. no doubt, buy them, because the manufacturer took into account all the nuances in advance.
• Do not forget about the fact that the fishing line for the trimmer should correspond to all the hardware characteristics of your motorcycles as much as possible so as not to cause its breakdowns.
• It is best to buy 2 or 3 slices of fishing line intended for different purposes at once. One type of fishing line will be more effective in mowing fresh young grass, the second. in mowing stiffly overgrown, and the third will help you demolish all the gross.

When you have already bought a certain type of fishing line, be sure to follow the tips for its operation from the manufacturer. Thus, if you use a thread for young grass for dry.resistant, it will get out of the working condition very quickly, and you will have to buy a new one and replace it again.

Selection tips

Arnetoli Motor

The Italian manufacturer has been manufacturing trimmers and equipment for them for more than 20 years. The choice is provided very wide, the consumer can choose for himself the model by power, diameter and cross section of the fishing line.

• The introduction of new technologies.
• High quality equipment.
• A wide range of.
• Available cost.
• Trimmer fishing line is resistant to wear, durable and light.
• Low noise during operation.

The greatest demand is a fishing line for a trim with a cross section of an asterisk.

Oregon

The American manufacturer is a leading world developer of a forest for a trimmer for grass. For the convenience of distinguishing types of products, it is painted in different colors. This is one of the main advantages of a large number of goods produced.

• Coils are both small windings and in the bays.
• High.quality wire.
• Using various models.
• Particularly durable series are designed for any vegetation, even for prickly shrubs.
• Series of different profiles, diameters and composition differ in color.

The most popular fishing lines of square and polygonal section became. They make the highest quality even trimming lawns.

Champion

The Chinese company, despite its youth, has already won the market thanks to the optimal ratio of price and quality. Raw materials for products are supplied from other countries: India, USA, France. The company produces both the equipment itself and the branded cords for it.

• Affordable price.
• The quality of the fishing line is evaluated by consumers as the best among budget models.
• Coils are available with different winding lengths.
• The models are equipped with a special cutting knife.
• For convenience, various color coating of fishing line has been made.
• The vein resistant to wear consists of two layers of material, has a twisted structure.

Husqvarna

A well.known Swedish company has been engaged in the production of garden equipment for more than 400 years. I won world success thanks to the high quality of products. A fishing line for a trimmer is produced both with trimmers and separately from them.

• Large range of goods.
• Coils and bays of various windings.
• High wear resistance.
• Trimmer fishing line is compatible with any heads of trimmers.
• A special form prevents a fracture, disheveled the ends and their melting when heated.
• Many options for silent fishing line.

Sturm

The young German trading concern has been supplying its products to the market for only 15 years. The production itself is in China, which allows you to reduce the cost of products. A fishing line for a trimmer is available in coils, turns and bays, has different coloring for the convenience of selection.

• Available cost of fishing line.
• Different winding lengths.
• There are particularly durable cords with a steel rod.
• The company has a product quality testing system.

Rezer

The rating of the best also includes a domestic manufacturer of fishing line for trimmers. The company produces three main series of cord: with a section in the form of a star, ellipse and square. There is also a particularly durable seven.angle fishing line for a trimmer. Coils have a winding from 15 to 114 m.

• Low cost.
• High.quality cutting of grass.
• To protect against heating the fishing line for the trimmer is covered with heat.resistant material.
• The possibility of choosing by color.
• Low noise during operation.

Speaking about manufacturers of garden equipment, one cannot help but recall the Japanese company Echo. She is engaged in the production of light agricultural machinery and fishing line for it. The company offers several lines of its products. It is distinguished by color, different shapes and thickness.

• Movies any plants.
• According to manufacturers, has excellent quality.
• Universal application.
• The cord is resistant to breaks and erasures.
• It is produced in a convenient form with coils and bays from 10 m.
• Products are not often found on free sale, as it is quickly sold out.
• The fishing line for a trimmer with a thick cross section is more slowly spinning.
• It has a high cost.

How to choose

Trammers for grass for cutting grass working on gasoline or electricity are very popular, and there is nothing surprising in this. They allow you to quickly and without much difficulty to clear large areas of thickets of grass, which cannot but rejoice summer residents and owners of private houses. However, to say that using these devices, the gardener will not encounter any difficulties, it is impossible. Over time, a fishing line for a trimmer has the ability to become thinner and break. Trying to replace it, the gardener is faced with a rather difficult choice. He has to determine the choice of a company, the material from which it is made, the forms and many other parameters, and to do this is not so easy.

When buying, the first thing you should pay attention to is the material from which it is made. It should be plastic, otherwise the product will often break up.

• nylon.
• made of nylon mixed with aluminum, graphite.
• nylon with the addition of a steel rod.
• coaxial threads.

The most common is a nylon fishing line for a trimmer. The material used for its manufacture is characterized by a fairly low cost and perfectly withstands the load. However, to say that it is the most durable, you cannot. So, for example, in a coaxial thread, strength is much higher, which means that it will last longer. Also, one cannot but pay attention to the cost of the product. Take into account the fact that in the manufacture of cheap positions, polyethylene is used. There is no need to talk about the high strength of such material. It wear out quickly and, accordingly, more often requires replacement.

If the gardener plans to cut not only grass, but also shrubs, then he should make a choice in favor of a model with a steel rod. They have high wear resistance and serve for a long time.

The shape of the section

Several types of forests are distinguished in the shape of the section:

• Round. Used for a bevel of any type of vegetation.
• Asterisk and square. Perfectly cope with rough grass.
• Twisted cord. Ideal for long.term work.

Round is cheaper than the rest. It is great for a bevel of thin, fragile grass. Its negative characteristic can be called that it is too noisy during operation. A round model with a cross section can solve this problem, but its price will be much higher.

A polygon or square. The model is able to cut off not only thin, but also rather thick grass. Its price is not much higher than round. This suggests that such a fishing line for a trimmer is an excellent compromise between price and efficiency.

Twisted square and asterisk. Such a fishing line for a trimmer is characterized by a high speed cutting rate. She will cope with both fresh and dry or solid vegetation. Of course, its price is quite high, but in this case it is worth paying more. This fishing line for a trimmer will help the gardener quickly and effectively cut the grass on the site.

Modern manufacturers offer customers fishing line with special Zazubins. They make the efficiency of work much higher, but the cost of the material also increase.

Fishing diameter

The product can have different diameters. As a rule, this indicator varies from 1.3 mm up to 5 mm. Fishing lines with small diameter are suitable for trimmers with a weak motor. They will not create an additional load on it.

For trimmers working from electricity, you should choose fishing lines with a diameter of 2.4 mm, while the power of their motor should be 1.4 kW.

For professional garden equipment, fishing lines with a diameter of 2 are suitable.7 to 5 mm.

The thickness of the fishing line

When choosing a fishing line for a trimmer, one cannot but pay attention to its thickness. Use is too thick, or vice versa, thin fishing line will lead to the rapid wear of the motor.

Armed with this information, each gardener will be able to choose that fishing line for a trimmer, which is suitable for his needs.

Rating of the best manufacturers of fishing line for grass

The market is filled with a huge number of offers, but only some manufacturers have earned a good reputation and trust of customers.

Toer

This model is used when working with trimmers. Its main feature can be called strength, high resistance to wear and performance. Due to the presence of a sawn profile, a fishing line for a trimmer is not too noisy when working.

• The fishing line for the trimmer copes with the bevel of weeds perfectly;
• differs in softness and elasticity;
• The model has several diameters. from 1.6 to 3 mm;
• affordable price.

This model is used in trimmers working on gasoline and electricity.

For its manufacture, high.quality nylon with the section “T Rooter” is used. The main feature is high wear resistance. It comes in a set of 50 pieces. The length of each segment is 30 cm, and the diameter is 3 mm.

This model is recommended for trimmers with high power. She can easily cope with hard grass, thick weeds and young bushes.

With the core

Denzel Extra Cord is used to combat weeds, young shoots of shrubs, mowing of hard and thick grass by means of motorcycle and electrode. The string is made of two.component material: the rod is a strong synthetic high molecular weight compound, the outer layer is high.quality nylon. The cord is distinguished by wear resistance and strength. Compared to a regular fishing line, Denzel Extra Cord work is 40% more.

Dual-cut Rezer is used when working with trimmers. “Cord” is a cutting element mounted in the head of the motorcycles, differs in the shape of the section and diameter. It is important for different works to choose the right thickness and section of the string. This will significantly reduce wear indicator and increase the speed of mowing. A trimmer fishing line having a square shape in a cross section is resistant and durable. It is used for mowing rooted weeds and rude weeds. The string has a high limit of strength, a long service life and is made from raw materials of 2 species. core and outer layer.

Dual-Cut Rezer-for the masters of their craft. It combines several positive qualities. wear resistance and significant resource. Due to the fact that the manufacturer has united 2 material, the string has an important quality for a professional. a high limit of strength.