How to disassemble the rogue of the Huter lawn mower. Model operating instructions

Electric trimmer for Huter Get-1000s grass: Independent review

No doubt, beautiful and well.groomed lawns love everything. But not everyone likes to care for the grass, not to mention the fact that it requires strength, time and good tools. over, it is on the choice of the latter that the final result and the sensation of the process largely depend. To turn the lace cuts from work into entertainment, you should think about buying a new electric trimmer for the grass: quiet, compact, environmentally friendly and inexpensive. Such as Huter Get-1000s, to which this review is dedicated.

Before you stock up on this material for refueling in a trimmer for grass, you need to decide on the choice. After all, the usual so.called round fishing line for a trimmer is far from the only existing look. How to choose the most suitable? First you need to determine the working conditions.

Type choice. a line for a trimmer with a round section is the most common. It will suit any reels with the rarest exceptions. This type of consumable is suitable in order to mow fresh, juicy grass. But with the mowing of the so.called dryness, this kind may not cope anymore. It is pointless to mention attempts to mow shrubs and mention.

In addition to the usual type, there are others with sharp faces. Usually they are made by a “star” or “square”. The presence of sharp faces is the main feature and key difference between these threads.

It is thanks to this feature, the threads of such species are able to mow dry weeds. But the spicy threads are not devoid of disadvantages, the main of which can be called rapid wear and strength, markedly inferior to the round type.

In addition to the already mentioned types of forests, there are still interesting and often encountered varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. Threads of this type are often used in tools working on gasoline and having an engine more powerful than one and a half horsepower.

Threads with a metal core are both with a round section and with sharp faces. Regardless of the type of cross section, such threads are the best suited to overcome plants. Threads related to this type easily mow not only dry grass, but even small shrubs.

The threads with wire inside are favorably different from other types of consumables for their incredible wear resistance. But unfortunately, this feature has a more than noticeable effect on the price of this type. The cost of threads with a core significantly exceeds the cost of threads of other types.

Choice in thickness

In addition, special attention should be paid to the thickness of the consumption material. For mowing young grass, a thread is suitable with a diameter of one and a half millimeters. The larger the diameter of the thread, the more dry and rude weeds it can overpower.

When choosing a fishing line in thickness, there is one “but”. It is important not only to evaluate the capabilities of the material, but also to take into account the features of the trimmer for the grass. You must definitely look into the user’s management, which is attached to the tool, and find information about the requirements for the cutting element.

The use of inappropriate thread can lead to the failure of the tool. The use of too thick thread will entail the overload of the device engine. And the use of too thin thread will significantly increase the wear of the torque.

That is why it is necessary to approach the choice of consumables no less responsibly than to refuel in a trimmer for grass. When a suitable fishing line for a trimmer is found and purchased, you can begin to consider the ways to wind it on the coil.

Features of the use of trimmers

A trimmer for grass, mowing grass with a fishing line, can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, a row in a garden plot.

Such a convenient, and most importantly, effective device, like a trimmer for grass, exists in several variations:

As the names understands, the types of trimmer for grass are noticeably different from one another. But regardless of the type of this tool, its cutting element can be a fishing line for a trimmer. Of course, a trimmer tilted for the grass for a trimmer is not infinite. And sooner or later it will need to be replaced by a new.

Fishing consumption directly depends on the frequency of using the device and the scale of the work performed. The more herbs are brazen and the more often it is trimmed with a trimmer for grass, the more actively a fishing line for a trimmer is consumed in it. And, accordingly, the faster it will end. In this regard, the question arises: how to refuel a fishing line for a trimmer to a trimmer coil for grass?

Not everyone knows the answer to this question. But the winding of the fishing line on the coil plays an important role in the work of a trimmer for the grass. To make the device normally, it is very important to correctly wind a new fishing line for a trimmer to the reel. About how to change a fishing line for a trimmer on a trimmer, and will be discussed in this article.

The first method of winding fishing

The required amount of fishing line is cut off. Now you need to carefully examine the bobbin to understand what type it belongs to. It depends on this how to wind the fishing line for the trimmer.

Spulks are of two types. In general, they are slightly different from each other. Regardless of the species, the coil is divided into two compartments. the upper and lower. In the first type, the dividing line does not close into the ring and has a deepening.

disassemble, rogue, huter, lawn, mower

Read how to breed gasoline for a benzotrimmer

The second type is solid, but near it on the sides on both sides there are small through holes. The method of winding the thread must be studied depending on which of the above species the coil belongs.

How to wind a fishing line for a trimmer to a trimmer coil for Huter grass

  • The previously prepared six.meter segment must be bent in half. Best not exactly in the middle, but so that one half turned out to be about fifteen centimeters longer.
  • Then the bending place must be inserted into the recess in the dividing line. One half of the fishing line should be in the upper part of the coil, the other half in the lower part.
  • Now you can proceed directly to the winding. You need to wind up in the direction in which the arrow on the bobbin indicates. When winding, you need to keep the threads so that they are not intertwined and the upper half is wound into the upper part of the coil, and the lower half into the lower part. Each half should remain free about fifteen centimeters from the end.
  • There are small recesses (or, in other words, grooves) in the upper edge of the bobbin to fix the consumable. The ends of the threads need to be inserted into these recesses so that they are fixed one opposite the other.
  • The final stage of refueling the consumable in the tool. the ends fixed on the bobbin must be put into the corresponding holes in the head of the trimmer for grass.
  • That’s all. The winding process is completed. Now it remains only to collect the head into a single whole. The spring is neatly placed back between the bobbin and the head. Then you need to insert the bobbin into the head and press them to each other.
  • Free ends of threads are recommended to pull out more tightly. To do this, take turns pulling the ends of the consumables so as to extract them from the grooves of the bobbin. You can make sure that the cutting element is extracted from the holding grooves, having tried to pull the threads a little. they must freely go through the holes in the head.
  • Clutching a bobbin downward, you need to put on a lid over it. The lid must be screwed to the head so that all the grooves on their buildings are compatible and the bobbin remains between them.
  • And finally, the very last action. the head is screwed back to its place in the lower part of the tool.

The process is completed. Trimmer fishing line is tucked up. Trimmer for grass is ready for further work.

Change a fishing line for a trimmer in a trimmer!

Taking into account the models of the tool, the thickness of the fishing line is 1.2-4 mm.

  • Round. the most durable;
  • curly. for soft grass;
  • twisted or with notches. for thin grass;
  • Professional, suitable not for all tool models.

When replacing a cutting thread, you need to choose the one that is suitable for your type of trimmer for grass. Preference should be given to a specialized fishing line, it is better, it will last longer and will not break down the tool. The thickness of the fishing line is calculated by the manufacturer based on the engine power.

Before filling the fishing line for the trimmer to the coil of the trimmer for the grass, it is better to soak it for half an hour in water, then it will become more elastic and stronger.

Non.automatic coil with one osm

Semi-automatic single-section coil with 2 antennae

Semi-automatic two-section coil with 2 antennae

All modern trimmer heads have three types of fishing line:

Before replacing the thread, it is necessary to remove the bobbin. Removal methods depend on the characteristics of the tool.

On trimmers with a motor near the ground, the coil has two side buttons, when pressed, part of the case is separated along with the device for winding the thread. On tools with bent bar, lambs on the device are moved counterclockwise; disconnecting it, remove both the bobbin and the spring inside it.

On trimmers with a straight rod, fix it with a screwdriver, rotate by moving the clockwise and remove. Then the device is disassembled either using the latches or by moving its parts in different directions. A spring from a coil is taken out.

In the case of adaptation with one antennae, they are off to four meters of fishing line, inserted into the hole inside it, fixing the fishing line for the trimmer, one end and move in the direction indicated by the arrow. The edge of the thread is fixed in the groove inside the bobbin, so that when it is assembly it does not unwind. If the groove is not, then this free end is fixed with a finger. Then the coil is assembled.

In the case of a trimmer coil for grass with two antennae.

In this case, they check how many grooves there are on it. one or two.

In the first case, both antennae are sent to a common groove, if there are two of them, then each of them is in his own. 2-4 meters of fishing line are passed through the hole so that the free edges of the fishing line are the same length, and turn the coil along the arrow-index. The ends of the threads are inserted into the grooves or held with a finger, assembled the device and attached to the trimmer.

In a coil with two grooves, the same piece of thread is folded in the form of a loop, sent to the groove between them and the ends are shaken at the same time. Then repeat the previous assembly.

Methods of automatic and semi.automatic supply of fishing line are more convenient for the user.

During the semi.automatic winding of the bobbin, the fishing line for the trimmer is passed through the hole inside, its ends are fixed in the holes on the case, it is collected and the button is pressed. The main thing is to observe the direction in which you wind up a fishing line for a trimmer. Further, the fishing line for the trimmer is easily wound in the right direction.

It is important to remember that the cutting surface must be protected from solid objects so that it does not wear out

Remove the coil from a trimmer for grass

On small electric trimmers with the lower engine location (when it is located at the ground) at the coil, usually there are two keys on the sides. Click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is also taken out, on which the fishing line for the trimmer is directly wound. When analyzing, be careful: there is a spring inside that can fly out and get lost.

On electric and gasoline trimmers with a bent bar (on such trimmers there is no way to put a knife yet) you need to grab the coil body itself with one hand, and with the second hand you need to start turning counterclockwise the lamb available on it. It is he who attaches the coil to the bar trimmer for the grass. Having unscrewed the lambs, carefully remove the whole coil, trying not to lose the spring available inside.

On electric and gasoline trimmers with a straight bar and a gearbox at its end (on such trimmers for grass, in addition to the fishing line, you can also install a knife) look for a hole under the coil, insert, for example, a screwdriver, we quietly rotate the coil until the screwdriver crawls deeper deeper. and the coil will be fixed. Now we twist the whole coil clockwise (since the thread is left) and remove it from the trimmer for the grass. Then we disassemble the coil. It can be collected using latches or twisted with a lamb. If the coil is on the latches, then we press on the sides on the base of the latches so that they bent and free one half of the coil body from the other. We just twist the lamb. There may also be a third type of connection of two halves of such a coil: with it you need to grab the lower part with one hand, and the top is the upper one, and start turning them in opposite directions. Disasseminating such a coil, you must also follow so that the spring available inside is not lost.

Why is the ignition adjustment

In some cases, when the engine does not start, the ignition adjustment will be required. Of course, first you need to check the serviceability of a candle and a high.voltage cable with a cap.

It is necessary to adjust the ignition on a two.stroke engine in order to ensure timely ignition of fuel in the engine combustion chamber. Below is a scheme from which you can understand the principle of operation of the internal combustion engine.

The spark in the candle should appear at the time of compression of the fuel with a piston, when it does not reach the upper dead point (VMT) at least a little. Когда поршень проходит ВМТ, происходит возгорание топливной смеси, в результате чего поршень под действием энергии взрыва уходит вниз.

How to lubricate the gearbox of a trimmer for grass?

In the upper part of the case where the gearbox is installed, there is a technological hole, which when the trimmer for the grass is twisted by a screw. This screw is unscrewed, and 1.5. 2 ml of fat is injected into the hole with a nozzle on the tube. If the lubricant was purchased in another package, a regular disposable medical syringe is also suitable for this operation.

After that, the screw is installed in its former place. This procedure, regardless of the user recommendations, must be carried out every 10. 15 hours of work of a trimmer for grass in working mode. Other reasons for the renewal or replacement of transmission oil are independent minor repair work (for example, cleaning and washing of the gearbox before the summer season), repair of the unit, storage of a trimmer for grass for winter, etc. D.

If the gearbox is disassembled, it is recommended to completely remove the remains of the previous oil from the surface of the parts, even if there are no traces of oxidation and pollution on it. How to lubricate a trimmer for grass or how to lubricate a gearbox with a gasoline trimmer. And only after that apply new oil. After applying the oil, it is recommended to turn the shaft several times manually and make sure that the oil is evenly distributed over all parts of the gearbox.

When lubricating, special attention is paid to the following elements:

  • Flywheel: on its surface, as a rule, the remnants of the grass are intensively stick, and the condensing juice of grass creates additional resistance.
  • The starting coil of the dog, which is in constant contact with the grooves on the flywheel when the drive is turned on. In this case, not only mechanical depreciation occurs, but also mechanical and chemical corrosion of the compound of the flywheel, since the materials for this pair are different (flywheel. Aluminum, dog-old).
  • Bearings, if their seals are worn out and lubricated through them. How to lubricate a trimmer for grass-expert? 8 How to lubricate a gearbox of a trimmer for grass grease the gearbox. In this case, the device begins to vibrate greatly under load. This happens with trimmers of Chinese.made, so in the future you should think about replacing a bearing unit with a better, for example, from the Swedish company SKF.

How to disassemble a coil

Before planning the repair of a fishing reel with your own hands, you should worry about the availability of the necessary materials and tools. For these purposes, the fisherman will need curly and flat boost of small and medium sizes, round.liners, tweezers, an awl, soft and tough hair structure, oily, a piece of rags, as well as any type of cleansing, alcohol.containing liquid and special mineral oil designed to lubricate the rubbing Details of the device.

It is convenient to carry out manipulations with a repair table under a bright lamp with a white spectrum of light, on a substrate of a sheet of white paper, where small details and connecting elements of the product will be clearly visible.

Trimmer coil device for grass

Cassyle heads for trimmers come in different designs. both simple and complex. The figure below shows a semi.automatic trimmer head from the Husqvarna motorcycle (Husqvarna).

This type of head is present in the configuration of most benzocosyles and electrimmers such as Stihl (Stihl), Patriot (Patriot), Champion (Champion), Bosch (Bosch), Huter (Huter) and others. The device of the braid head is quite simple. It includes the following details:

  • the base of the mowing head;
  • button for semi.automatic supply of the cord;
  • Spulk (coil), into which a fishing line for a trimmer is refuel;
  • spring;
  • eyes. through them a fishing line for a trimmer goes outside;
  • trimmer head cover;
  • Trimmer fishing line (cord).

There are also simpler trimmer heads shown in the next photo.

TESTING The Cheapest Lawn Mower On AMAZON

All these nozzles do not allow you to change the length of the fishing line in semi.automatic mode (after pressing the button). In the case of a break in the cord, you have to stop the mower and change it manually.

How to disassemble a coil

Before planning the repair of a fishing reel with your own hands, you should worry about the availability of the necessary materials and tools. For these purposes, the fisherman will need curly and flat boost of small and medium sizes, round.liners, tweezers, an awl, soft and tough hair structure, oily, a piece of rags, as well as any type of cleansing, alcohol.containing liquid and special mineral oil designed to lubricate the rubbing Details of the device.

It is convenient to carry out manipulations with a repair table under a bright lamp with a white spectrum of light, on a substrate of a sheet of white paper, where small details and connecting elements of the product will be clearly visible.

Replacing Magneto

To correctly purchase Magneto for replacement, you need to contact a specialized store or service center and name the brand and model of a trimmer for grass.

To remove the magneto, you need to remove the plastic casing from the trimmer for the grass. On different models of motorcycle, this process is different. It is usually necessary to unscrew the bolts, but on some benzotrimers it may be necessary to squeeze the latches. After that, access to the coil opens. To remove the part, you need to unscrew the holding fasteners and disconnect the wires.

When installing a new part, you need to correctly set the distance between the flywheel and magneto. To do this, you need to turn the flywheel with magnets up, install the coil and fix it, but the screws do not completely tighten, so that there is a short distance between the details. Further, between the coil and the flywheel, it is necessary to put a calendar, a business card or four.folded paper sheet of A4 format, you can also use a plastic strip cut out of the bottle. Such tricks will provide a suitable gap between the flywheel and magneto. A more competent solution will be the use of a special template, but it is impractical to purchase it for the sake of once. Next, you need to tighten the fasteners, remove the object between the details, and, holding the magneto with your hands so that it does not spin, tightly tighten the fixing screws. After that, you should crank the flywheel and make sure that it does not catch the coil anywhere. Now you need to connect the wires and insert the candle into the cap, and then check the operation of the device.

Fix 90% of Briggs lawn mower not starting problems. Easy repair.


From point of view. hacksaw canvases should not be completely

Everything that is needed for the manufacture of the nozzle

First you need to make the base of the nozzle. For this, from a metal plate

Cut the square with a side of 100 mm. You need to mark it in such a way that there is a hole exactly in the center (at the intersection of the diagonals). To do this, from the center of the selected opening perpendicular to the short side of the plate, we measure a distance of 50 mm and plan the trimming lines.

Cut the excess and get a square of 100 mm x 100 mm. Now it is necessary to twist the corners a little and drill the central hole for the shaft of a trimmer for the grass.

Twist the corners and drill the central hole for the shaft of a trimmer for grass

Cut the canvases for metal, measuring from each end 8 cm. We get 4 blanks with finished holes.

The end of the screw must be blown up so that the nut does not fly.

Fishing lines winding algorithm

The procedure for winding the fishing line depends on the type of coil. with one or two antennae, as well as with automatic charging the cord.

On a reel coil

Winding a fishing line for a trimmer to a coil with one osik is very easy. In such structures, depending on the brand of a trimmer for grass, from two to five meters of the cord is placed. The edge of the fishing line in the spool must be tucked into a special hole or groove, after which the string is wound in the direction opposite to the rotation of the coil during operation.

After the fishing line for the trimmer is windpowed, you need to leave a small piece (15-30 cm), walk into the output of the spool and collect the head again.

To a coil with two antennae

In the rogues of this type, you need to inspect the inside of the coil and determine the number of grooves for winding the cord provided for in it.

For winding, you need to take a piece of fishing line with a length of two to three meters. For a spool with one groove, tie a fishing line for a trimmer into a through hole, combine a mustache, leve and wind it up in the direction in the direction of its rotation during operation. If fixing grooves are provided, they need to go through the ends of the cord, then stretch them into the output, and then close the coil and put them in the same place.

Read also: Sharpening drill at home video

For a two.lep mewood, the difference is that the section of the string should be folded in half. Next, it is necessary to charge the middle of the bend into the groove between the grooves, and then wrap each of the pieces of fishing line on its path, fix the antennae and assemble the coil as well as the spool with one track.

On a trimmer head with automatic dressing

For heads with automatic refueling, it is enough to just start and squeeze the edges of the fishing line, and the tool will perform further winding on its own when turning on. It is impossible to make a mistake here, because the coil itself recognizes how the antennae should be located.

Preliminary preparation

First of all, to wind the fishing line, it is required to remove the coil (bobbin, spool) from the trimmer for the grass. specific actions will depend on the complexity of the configuration and the type of product itself:

  • Small electric trimmers for grass with a working location of the engine and coils in the lower part, as a rule, have side keys on both sides of the bobbin. With the simultaneous press on them, the upper part of the coil, along with the internal contents for winding the fishing line, is disconnected, while the lower remains on the trimmer. It is advisable to analyze the bobbing in an even smooth place, so that the spring does not jump out and not be lost;
  • Electric and gasoline trimmers for grass with a curved rod without the ability to install a knife, as a rule, have coils with a special lamb: in such structures, you should hold the spool in a fixed position with one hand, and rotate the fixing bobbin on the bar with a barack’s baracks. After disconnecting the nut, the whole bobin is removed.
  • Electric and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and, with slow rotation, such a mutual arrangement is achieved when the screwdriver enters the hole and the bob is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third cases, the coil, depending on the design, are versed in various ways. In the bobbins with a lamb, lamb is twisted, in the reels with latches, latches-fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then it is enough to turn them with your hands in the opposite directions until they are completely developed.

How to disassemble and assemble a trimmer for grass

For an independent disassembly of a trimmer for grass, a set of tools is prepared:

Disassemble each node of the device separately for diagnostics.

Dismantling the electrimmer

Electric trimmer for grass consists of a main electric block and a rod. Consider how to analyze for the repair of the electric part:

  • Put an electric car on a flat surface.
  • Unscrew the fixing screws of the trimmer body for grass on one side.
  • Having removed the lid, you can diagnose, repair or replace the electric motor, drive and bearings, brush unit, launch buttons and other elements.
  • To assemble a trimmer ectric for the grass should be sequentially: first, install the motor by tightening the fasteners; connect an electric circuit; Gently lay the wires in the case in the corresponding recesses; Close the top cover and tighten the screws.

Dismantling of a benzotrimmer (the video instructions shows a trimmer for Gruntek BS 52x grass) for engine repair is performed as follows:

  • First you need to remove the gasoline engine from the rod.
  • Disconnect the starter by unscrewing the fixing bolts.
  • Remove the protective casing of the gas tank, and the tank itself.
  • Unscrew the spark plug and remove the outer engine cover.
  • Remove the carburetor, pipe, ignition and muffler from the engine.
  • In order to conduct diagnostics and replace faulty parts of the motor, first of all it is necessary to disconnect the clutch node. To do this, fix the combustion chamber, and with the help of a unit key, unscrew the fixing bolts of clutch.
  • After the repair, collect a motorcycle, performing the same action in the reverse order.

What trimmer do you use in a summer cottage, and whether to repair the tool yourself?

Installation of fishing fishing line: pros and cons of

Sometimes a conventional fishing fishing line for a trimmer is installed in the drum of a garden trimmer for grass, instead of a special one, it is just a waste of time. The fishing fishing line for the trimmer is too soft and is erased many times faster than the traditional option. She can really mow grass, but such non.standard use is poorly suitable for her. A fishing fishing line for a trimmer can be used exclusively, as a spare option, if there is nothing else at hand.

It is also worth considering that it should be quite thick. It is better to insert a fishing line for a trimmer with a thickness of at least two millimeters into the lawn mower. By the way, difficulties may arise with its installation if the grass trimmer model provides for winding on the coil.

Fishing line for a trimmer. varieties and the ability to replace other material

A cord for a trimmer for grass can be of different diameters (from 1.2 to 4 mm), and it must be chosen depending on which vegetation is required to mow. the thicker the fishing line is for a trimmer, the more rough grass it will cope. Experienced users recommend putting a fishing line for a trimmer 2 mm thick, which is a universal.

The shape of the fishing line can be round (for juicy grass) or with sharp faces in the form of a square or asterisk (for beveling dry grass). The second type is less durable and wear out faster compared to the round cord.

One of the popular issues regarding the work of trimmers is whether it is possible to replace a special cord for mowers with other materials, for example, metal or steel cables and strings, wire, etc.D. You need to know that the installation of such items is not recommended, because along with them the trimmer for grass turns into dangerous equipment. During the mowing, pieces of wire or metal will constantly break off and fly off in different directions, risking to injure the employee. And if you accidentally touch their limbs during work, a serious wound is provided.

Owners of trimmers interested in whether it is possible to use a fishing fishing line for a trimmer, we answer. this is allowed, but it will be much faster to tear and wear out, which means it is a frequent replacement.

What can be used instead of fishing line

Many users of trimmers are wondering: how can you replace the default cord, which is used in such machines? Start dangerous experiments, placing metal or copper wires, metal ropes or strings and regular fishing line for a trimmer to the header with a braid.

If you install a metal cable instead of a fishing line, a trimmer for grass will turn into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during the operation of the unit, the steel cable will gradually earn, its end is unraveling, and small pieces of wire will fly in different directions at high speed.

And if you accidentally hook your or alien leg when working with a steel cable (wire), then a strong and deep section of the fabric, and in some cases, amputation of the toes, is guaranteed. No wonder the manufacturer uses Kapron for these purposes, since it is quite light and durable, and when it flies away, it does not fly far and cannot lead to injury.

Of course, you can use a fishing line for a trimmer to a trimmer for grass instead of a standard mowing fishing line, but this will give you additional trouble, because it quickly wears out, breaks, mows slowly and is not suitable for haircuts of hard grass. In addition, when performing work, a lot of time is lost to replace a broken tool more than once.

In practice, the establishment of a conventional mowing fishing line is justified if the user is going to mow grass at the fence, especially if he is from a grid. In this case, in order to protect the standard, and sometimes road a fishing line for a trimmer from wear, it is changed to a fishing line for a trimmer, which is not bad for al-ko. Usually, to change the fishing line for a trimmer to a fishing line for a trimmer, it must be selected with the largest thickness. 2-3 mm.

The cord is not served, the coil does not spin

Automatic or semi.automatic head should serve a fishing line for a trimmer without stopping the device. But if it does not come out, then the reasons may be as follows:

  • The fishing line for the trimmer is incorrectly wound in the coil, which is why the latter does not spin;
  • The cord is wound unevenly, and the thread can get stuck between the turns (the thread should be screwed carefully, returned to the bend, without distortions)
  • Too short ends of the threads come out of the holes, as a result of which there is not enough centrifugal force to extract them, and the fishing line is not supplied for the trimmer (it is recommended to always adjust the length of the cord before starting the device, pulling a little)
  • The fishing line for the trimmer is sticking together (it will be discussed later).

Substitution of a trimmer fishing line for grass: annotation of fishing line substitution on a trimmer

The main »Change in the trimmer strip for grass: annotations for the substitution of the trimmer strip for grass

Trammers for grass (they are also lawn mowers) are intensively used by a modern society to care for lawns and other similar objects of horticultural farms. The tool is characterized by its own highest efficiency, despite the incomprehensible quality of mowing of the grass (in comparison with ordinary farmer oblique. Earth and heaven). The main advantage of trimmers (lawn mowers). The highest performance of the low cost of the physical forces of the operator. But over time, the cutting element of a trimmer for grass (nylon forests) wear out or is damaged, according to this, the trimmer for the grass becomes an unnecessary inventory. So, the task becomes a burning. How to change the head of a trimmer for grass and how to change a fishing line for a trimmer of a trimmer head for grass? We will see this process using the example of Black and Decker’s lawn mowers and others.

Step 3rd: The equipment of the head node

Stretch the end of the strip after a couple of rounded slots of the coil. Change both the washers and the spring (if any) new details supplied. Bend both ends of the strip at right angles.

The final technical stroke of the process of configuration of the strip on a trimmer for grass is to put a cap on the head with the next fixation by pressing the strength and light twisting.

Put each end into the hole at the base of the winding drum. Install the coil in the inner area of ​​the head, focusing on the spring. Put on the lid, align with the base and press down a little down with a small bend counterclockwise, put the lid on the clamp tabs. This completes the substitution function.