How to hitch a plow to a tiller

single axle tractor

The power supply is not able to supply the current required for normal work of the tool. However, if the width or depth of the base needs to be increased, it may be necessary to use additional burrs.

Cutters additional for power tiller Neva allow significantly improve and accelerate the process of mixing and processing the base. With all that, they help the power tiller move forward. Varying the number of rotary hoes allows varying the width of tilth to optimise the load and increase the service life of the power tiller.

On heavy clay soil, it is better to use two pairs of tillers than any other, especially when cultivating virgin land. Adding tillers-cultivators can also be and even preferably on a single-axle tractor earlier cultivated plots with no heavy base.

Changing the depth of milling is possible with the adjustable coulter. a strong steel anchor installed plumb into the coupling unit of the cultivator. All told, the ultimate ripping depth is determined by the diameter of the tiller.

Types of ploughs for “Neva” power tiller

The plough is made up of an unusually shaped ploughshare and a heel that tills stale soil. The blade is made of very strong metal, because it is the one that will be under the most strain. On different models of motor blocks, plows are also selected individually, but on sale there are universal products:

• Single-hoe. In this case there is only one ploughshare, which cultivates light soils;
• Rotary. There are several working blades;
• Reversible. The blade is made in the form of a feather, which greatly facilitates the overturning of even harder types of soil.

The rotary plow turns the soil toward one side, so when you get to the end, you have to go back to the beginning of the furrow. With a reversible plow, things are simpler. when you get to the end, you only need to turn the ploughshare and continue working. This design makes it possible not just to plow the ground, but also to harvest root crops.

For the Neva power tiller, there’s a type of reversible plow like the Zykov plow. This unit especially stands out because of its characteristics. The plow for the Neva Zykov power tiller consists of:

• Right-hand and left-hand body with plowshare and mouldboard;
• Support wheel;
• Fixing the structure to the ridge;
• Mechanism with fixation of plough bodies;
• Ploughboard. It ensures the stability of the unit during work on the ground.

The reversible plow is attached to the “Neva MB2” motoblock with a special bracket.

It is not reasonable to install a rotary plow if your plot is small, since the construction costs quite a lot. It works due to plowshares arranged on one axis. When you turn the machine on, the axle starts to turn, shifting the soil. The plough can be used for ploughing up to a depth of 30 cm.

Types of attachments

The design of power tillers allows the use of additional attachments that greatly enhances the functionality of the machine.

There are several types of such equipment:

• Plows (reversible, rotary, and ridged). The plough is used to cultivate arable land and perform deep tillage.
• Cultivator or tiller. This equipment is one of the basic. sometimes it can even be installed instead of the machine’s wheels. The cultivator cultivates the soil well but does not trample it.
• Harrow. a device used to level beds and break up clods of earth.
• Potato harrow. a plow with a hoe blade made in the form of rods.
• Mower. can be rotary or segmental. The rotary is quite effective during grass mowing, while the segmental is used for mowing grass between bushes and trees.
• Tedder. a device that is used to turn the hay, which facilitates its drying.
• Potato planter. equipment, which consists of a container, furrow cutter and hoe. The potatoes fall into the furrow during operation and the scarifier covers them with soil.
• Seeder. Works on the principle of the potato planter. It can be used to plant watermelons, carrots, garlic and onions, tomatoes and more.
• Trailers. This equipment is capable of carrying weights of 300-500 kg.

In addition, there are such attachments as a rotary brush, snowplow, blade, etc.

How to choose a plow for your power tiller

Choosing a plough, pay attention to technical characteristics of your walking tractor. For the processing of small plots suit a single ploughshare unit, and if you are the owner of a heavy diesel motor-block, you can connect a dual-hulled device that speeds up the processing of the land in half, compared to the single-hulled unit

Single hinged plough SKAUT PL-130

SCOUT PL-130 single hoe plough can be attached to one-point hitch on mini-tractors and power tillers with horsepower from 10 l. с.

There is a bigger steel plough the machine, and the design is reliable. no need to sharpen the ploughshare. A limiting wheel is installed to adjust the plowing depth on uneven terrain. Plow is designed for heavy loamy and virgin soils.

When operating with a floating hydraulic spreader, the unit must be weighted down.

SCOUT PL-130 HYD single hinged plough with undercutting disk

SCOUT PL-130 HYD single hoe plough equipped with undercutting disk for more effective work on turf. The unit connects to mini-tractors and power tillers with one-point linkage. Working part is made of reliable steel.

The angle of attack of the share is adjusted by turnbuckles. Threshold wheel controls plowing depth. Cutting disc is designed for undercutting of plant roots during ploughing which increases productivity and quality of ploughing.

For plowing heavy soils and fallow lands, it is necessary to install on machinery weighting agents: 80 kg in front and 60 kg in back.

SCOUT PL-225 double hinged plough

SCOUT PL-130 two-hoe plough is the only two-hoe device that is connected to a power tiller. The unit is secured with a single-point mechanism. But to work you need a single-axle tractor or a mini-tractor with 15 liters or more. с. The basis of the plough is a triangular frame with turnbuckles, which regulates the horizontal and vertical position. The body of the ploughshare is adjusted with a stand. The depth of plowing is adjusted by the limiting wheel.

• https://MoyMotoblok.ru/rabota/vspashka-zemli-motoblokom-plugom-i-frezami/
• https://tokar.guru/stanki-oborudovanie/motobloki/kak-pravilno-pahat-zemlyu-podgotovka-motobloka-i-oroda-dlya-vspashki.html
• https://sdelai-lestnicu.ru/stroi-tehnika/kak-pravilno-pahat-plugom-na-motobloke-kak-otregulirovat-glubinu-vspaski-zemli-nastrojka-motobloka-dla-pahoty-plugom
• https://stroy-podskazka.ru/motobloki/pravila-vspashki/
• https://zapchasti-isuzu.ru/marki-specavto/kak-pahat-ogorod-na-traktore.html
• https://remont-dmb.ru/service/vspashka-zemli-motoblokom/
• https://tehnika.expert/dlya-sada/property-sadovaya-texnika/kak-pravilno-vspahat-zemlyu-motoblokom.html
• https://mzoc.ru/selskohozyajstvennaya/kak-pahat-motoblokom-s-plugom.html
• https://kamuflyzh.ru/tehnologii/kak-pahat.html
• https://vospari23.ru/kak-pravilno-pahat-ogorod-motoblokom-s-plugom/
• https://avtovishki-v-arendu.ru/spetstehnika/vspashka-ogoroda-motokul-tivatorom-pravil-naya-tehnologiya-i-sovety-ekspertov.html

Mounting a plow on the machine with a hitch

Many people think that when you connect additional equipment to a power tiller, it will speed up the work. But they’re wrong. In the process of plowing, the power perpendicular to the level of the mouldboard is exerted on the plough, there is a resistance, pulling the tool sideways. If the attachment is very rigid, it takes a person’s strength to push the equipment into the soil. Therefore, it is recommended to leave a horizontal plane gap of up to 6 degrees when connecting.

Couplings. devices that connect the single-axle tractor to the plow. Are of two types: universal and stationary. The former are more suitable for this kind of activity, because they allow you to make the right adjustments.

Attaching the tool is an uncomplicated process where the hitch takes the right place on the equipment and is secured with a screw. This is where the procedure for adjusting the plow to the single-axle tractor begins.

This process is also called angle of attack. It represents the degree of slope of the plough relative to the plane. Adjustment takes place using the spiral handle.

• 1. Place a single-axle tractor with a plow attached to it on a stand. Unscrew the adjustment knob until the board rests firmly on the ground, without gaps.
• 2. Turn the crank back in until the rear end rises a couple of centimetres off the ground. If you do something wrong at this stage, there can be unpleasant consequences. When the slope of the ploughboard is too steep, the implement is too difficult to move. Otherwise, it will not be able to plow the proper portion of the ground.
• 3. Check if the setting is correct, you will be able to plow, the single axle tractor should go medium: not too easy or difficult.

It’s time for the final adjustment so that the initial plowing of the soil is easy. the single axle tractor is placed at the edge of the plot, the plough is driven into the ground and ploughed. If one tries to make a straight furrow, the following furrows will also be straight. A stretched rope will help.

At this stage it is best to observe the degree of plough penetration by placing a measuring tool in the ground. If necessary, the plowing depth can be adjusted. One of the wheels on the power tiller is pushed into the ground, and the plough is positioned perpendicular to the ground. To do this comfortably, you can set the device on a straight plane, putting a base under the wheel, equal to the depth of the furrow.

Choosing a power tiller

When buying a single-axle tractor for plowing land, you need to keep in mind the other jobs it can do. The mechanism with a motor not only plows, cultivates and perches, but also transports cargo, removes trash and snow from the territory, mows the grass. Watering seedbeds and harvesting crops in the fall. operations that are also within the power of a power tiller. Some units have a shaft, which joins the various equipment that can saw and chop wood, pump water, provide power. That is the difference between tillers and power tillers.

Machines for plowing the land are available in 3 varieties: light, medium and heavy. These models of medium and light class are intended for home use. Their weight varies from 50 to 100 kg. The machines are fitted with engines rated at 4-8 liters. с. Most units have multiple front and rear gears. Heavy-duty chainsaws work on farmland. They weigh more than 100 kg and are equipped with a motor of more than 8 liters. с.

The choice of mechanical helper for tillage is related to the number of functions it performs, the area of the plot, and the type of soil. The more dense the soil, the heavier and more powerful a machine is needed for plowing. Its weight should be selected from 95 kg. The best products are equipped with a diesel engine. They have a large tractive force, high operating life, the diesel engine uses less fuel. But when the ambient temperature drops to 2° C or less, the engine is more difficult to start.

For a cultivated area of up to 15 acres a single-axle tractor with a working width of 70-80 cm and an engine power of 3-4 liters is needed. с. For 15-40 acres is suitable machine with a working width of up to 90 cm and the power of 7 liters or more. с. If the land area is more than 40 acres and up to 1 hectare, you can plow it with a machine with an engine over 9 liters. с. and a working width of 1 m.

It is possible to buy a big set of equipment together with the main walking tractor. But it is best to choose the necessary devices: lawnmower, motor pump, snow thrower, potato mower. For snow removal buy a product with a gasoline engine. For transporting loads, you need wheels with a diameter of 45 cm or more. It is good if there are height-adjustable handles.

The most expensive part of a walking tractor is the engine. Domestic units are equipped with imported engines. Saving on an engine leads to frequent repairs that are more expensive than the cost of the motor. Quality engines are produced by companies:

All engines produced are available in two-stroke and four-stroke versions. The latter have proven to be reliable and economical. When choosing a motor, preference should be given to motors with a disk clutch and a serviced gearbox. These products are the most functional and reliable. Gearboxes are a better choice. Worm systems often overheat during operation and require stopping the machine every 20 minutes.

These machines are suitable for working the land on farms and small household plots.

• Caiman (France) with 6 hp Robin-Subaru engine. с. Has the following gears: forward. 2, backward. 1. Ploughing depth 32 cm, width 90 cm.
• Neva and Cascade are produced by domestic manufacturers and equipped with the American Briggs Stratton engine.
• Centaur (China) with 7 liter gasoline engine. с. Plows at a depth of 30 cm, aisle width is 100 cm.

These machines are equipped with quality diesel engines made in USA or Japan, have a gear reducer and a disc clutch. 4 forward and 2 reverse gears allow to work with various attachments and carry loads.

Owners reviews

Often before making a purchase we consult our friends or acquaintances who have already bought a similar product or service. But what to do if no one from your acquaintances bought a plow?? If there is an internet, you can always read reviews of those who have already bought a plough for their Neva power tiller.

As for reviews about this model on the Internet, the forums are not noticed a clear criticism of this power tiller, in most cases all reviews are positive.

Yuri:

“The problem with plowing the land has always been in our family. Either the tractor drivers didn’t have time, or they broke down, or some other nonsense happened to them. And as a result, it was very difficult to plow the ground before planting. So you don’t just go around humiliating yourself in front of them, you pay them money and buy fuel. It’s just unbearable! So I decided to buy myself a Neva single axle tractor and a plough to go with it. In the end I was a million percent satisfied. I’m always sure that my land will be prepared for sowing and cultivated after the harvest, so I don’t have to depend on anyone.”

Igor:

“I bought a VRMZ plow and am completely satisfied. Easy to install, no superfluous details, copes with his work by 5 I use it for 3 years. After work, I washed it, lubricated the joints with Lithol, and put it on until the next season’s need.”

You can also help other readers of our web-site with your feedback on this model, if you are the owner of this model of walking tractor or its attachments, you can leave a review about it, or ask any questions about this model in the Комментарии и мнения владельцев below.

Step-by-step instructions. Adjusting the plough for the motor-block

Step-by-step instructions. Adjusting the plow for a motor-block

Plowing the land is one of the most important types of work in the fall and spring seasons. This work should be done to prepare the ground for planting or sowing a variety of crops. Performs plowing plow for power tiller, which is very important to adjust.

How do you adjust the plough correctly so that the land is ploughed correctly, evenly, carefully and quickly? You will find the answer to this question in our article.

Preparing your power tiller for ploughing

Plowing the soil begins with the preparation of the power tiller. Let’s see in detail how to do it.

The single axle tractor must be unpacked before ploughing. It must be transported to the job site without trailers or other attachments. often the technique is delivered to the place of destination by a car. If the area you are going to plow is close to your home, you need to assemble your power tiller on a level surface in any convenient place.

Step one. Removing the transport wheels

So, you’ve delivered your single axle tractor to the area you’re going to plow. The first thing to do is to remove the transport wheels in order to replace them with special grousers. To make this part of the job easier, you can put a stand under the hitch located at the back of the power tiller. You need the tines to have a better grip on the ground. They are just the right tool for ploughing, planting potatoes, carrots and beets.

The second stage in preparing your power tiller before ploughing involves replacing the hubs on which you installed the transport wheels with extended hubs. This is to increase the distance between the shoes a bit. This solution will significantly increase the stability of the power tiller during work.

You have already installed the extended hubs? Now it’s time to install the skids. It is very important that they are fitted correctly. This factor is checked by the direction of the tread pattern. A narrower tread pattern means forward movement.

Now you can remove the plow stand and adjust the plow. The plough is assembled by installing a coupling device (so-called hitch) on it. This hitch and plough must be assembled in order to mount it to the single axle tractor at a later date.

At this stage you need to equip the plough, the hitch and wrenches with all the necessary tools.

To adjust the depth required for ploughing, align the hole in the hub of the hitch with the middle hole in the plough leg. These elements are then connected using the attachment bolt.

The attachment bolt is inserted into the upper hole in the plough leg and secured with a nut. When doing this it is extremely important not to overtighten all the nuts at the attachment points of the plough and hitch, as they will then have to be loosened anyway during the plough adjustment phase. Now that the hitch is mounted onto the plough, we can move on to the next step.

Step Four. Mounting the plough to the single axle tractor

After completing all the previous steps, the plough can be mounted on the single-axle tractor. To do it this way: one or two pins (it depends on the motoblock model) is mounted on the plow, and then the pins are securely fixed with cotter pins.

To make it much more convenient for you to adjust the plough, it is recommended to set the single-axle tractor on stands. This could be two pieces of wood 150×150 millimeters in cross section. It is this size will help to adjust the optimal plowing depth, which should be in the range of 15 to 18 centimeters.

For easier adjustment, also place the plough on a small surface, such as plywood or a board. This will enable you to adjust the inclination from the heel to the nose much more accurately. This angle is adjusted with a special bolt on the hitch, which is very convenient. And it happens in this way:

1) Turn the adjustment bolt clockwise to raise the heel of the plough, thereby increasing the ploughing depth.

2) Turn the adjustment bolt counterclockwise, slightly lower the heel of the plough, and thereby reduce the ploughing depth.

Always keep a distance of three to five centimetres between soil and the plough. Otherwise the plough will simply dig into the soil. If the angle of the plough is set incorrectly, the quality of ploughing will not be satisfactory. This will significantly increase the load on the engine and the operator’s hands. After adjustment, tighten plow and hitch fasteners.

To measure the distance between the gear and the reference surface (i.e. plywood or a board), you need to use a tape measure (or other measuring device). The normal clearance is 15 to 20 centimetres. It is important to observe this condition.

Before plowing, test plow and check quality of plow adjustment. For this purpose it is necessary:

Check furrow depth and mouldboard quality.

Check the smooth running of the power tiller and the load on the operator’s hands.

If you are satisfied with all of the above points. you can start ploughing. If something is wrong, you must readjust the plough.

The test plowing of the plot is done as follows.

Set the single-axle tractor down on the edge of the field.

Start the first gear and gently press the clutch lever. It is extremely important that the tiller’s handlebar be parallel to the ground to prevent the single axle tractor from sinking into the soil but also to avoid the tractor’s elevation above the area to be tilled. When ploughing, the operator doesn’t need to push the single axle tractor too hard, as this farming machine easily cope with its work without any additional effort.

After the first furrow it is essential to check the ploughing depth. For this purpose it is worth to use a tape measure or an ordinary ruler. If the figures are the same as those you initially set, it means that you can begin full work.

Owners Комментарии и мнения владельцев

Mikhailo, 40 years old:

I want to give to both types of power tillers. And the shadeplank and goose feet do a wonderful job even with the toughest ґruns. When I work with clay. I milled the ground with shovel blades. The soil is very soft and fluffy. Filling in the soil for light soils is 320 cm, I take loam and clay in three steps, 10 cm each. For the pass. Single-axle tractor, it is true, sometimes zarivayetsya, but here I do not sleep and ready. The plow even do not use, only in the afternoon when I want to prevent the bugs-worms and storm dwellers (that the birds will eat that over the winter is frosty).

Stephen, 35 years old:

I have had my Ugra for 4 years and it is still in working order. The Lifan motor has never been broken. Є all the necessary equipment for the tiller, including a vibratory tiller and a woodchopper. At first I bought a conventional digger, simple and without enhancements. Everything worked, but. 30% of the harvest was left in the ground! Then I am glad and decided not to spoil. I bought a vibrating nozzle. Honestly, all 100% is not possible to remove, but 92% of the potato crop is straight in my loo. But the woodchopper was made by myself. I watched the video on the Internet, found the chair. An excellent device turned out, for a day or two I make a reserve of firewood for the winter (the furnace heating), and, wait a minute, not a little. And what’s nice. not overloading, single axle tractor does it all by itself.