How to Refuel a Lawn Mower Fishing Line

I want to devote today’s article to the sore topic of summer residents and gardeners of the entire post-Soviet space “How to refill a fishing line into a trimmer.” Not many trimmer manufacturers answer this question in their operating instructions. Therefore, it is difficult for ordinary gardeners to figure out how to do this correctly.

I want to start with a brief description of the technical characteristics of the trimmers.

So, trimmers are electric and gasoline. The cutting element of the trimmers can be a fishing line and a knife. The fishing line is ordinary, four. pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and four blade blades. Knives are also plastic and metal.

The feed system of the fishing line from the trimmer is manual, semi-automatic and automatic.

Development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the fishing line and the number of knife blades according to the power of the trimmers. Otherwise, the engine is overloaded, which as a result leads to its breakdown. And this is an additional and significant cost.

Today on the market are trimmers:

With one nozzle. only fishing line.
With two nozzles. fishing line and three-four-blade knife.
With one nozzle. only a three-four-blade knife.

Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacing the fishing line with a metal cable, or fishing line. But at the same time they do not think about the safety of their and their loved ones, because, as a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave it crippled for life. Using fishing line can and gives a better effect, I have never personally tried it than fishing line for trimmer, but this work has a number of inconveniences: when it comes into contact with solid objects it dissolves or can simply be pulled out of the reel without limit.

So what is called closer to the topic. I give an example of how to fill a fishing line into a trimmer (BOSCH Art 30 trimmer). Everything is very simple. We started.

How to Refuel a Lawn Mower Fishing Line

After you have chosen the fishing line for refueling, you need to cut off the necessary amount of fishing line, because all the fishing line in the skein is not wound into a reel.

Cut off and start winding.

Remove the coil and the protective cover from the coil.

They took off. We fix one end of the fishing line into the gap and carefully and evenly wind the fishing line.

The amount of fishing line should be such that the protective cover of the reel closes and the line on the reel unwinds itself a little.

The second end of the fishing line is planted in the hole on the protective cover.

Next, take the coil and the protective cover of the coil. We sink the end of the fishing line from the reel into the metal hole on the protective cover of the reel. Tighten the fishing line a little.

We put it all on the trimmer. Turn the coil clockwise until it clicks.

Secured. Now connect the trimmer to the network. We put the trimmer in the starting position for the job. Turn on the trimmer. The excess length of the fishing line will be cut off on the cutting blade.

Trimmer Coil

You may also like

  • The STIHL FS 38 trimmer is probably well known to all fans of high-quality garden equipment. People who once tested the brand’s products in practice rarely switch to products of other brands, because ...
  • Table grinding machines with which you can:- sharpen the cutting edge of turning tools and drills; - perform rough peeling of the surface from rust and deposits;- chamfer before welding;- remove burrs...
  • Miter saws "Bison". description of functions, purposeMiter saws of the Zubr brand are a category combining saws for domestic use and for industrial use. The purpose of the “Zubr” miter saws:...
  • Date of publication: January 25, 2016. Category: Articles.A beautiful lawn is the face of a summer cottage, so most gardeners prefer to plant special silky grass on their land, which not only pleases ...
  • Dozens of manufacturers produce gasoline engines for garden equipment, but they are not always available and easy to maintain.Chinese engines for tillers have the following advantages over others: lo...
  • Posted by Aleksey Ryndya category expert "Power tool" Cordless screwdriver. a hand tool designed for screwing and unscrewing fasteners (screws, screws, screws). It is a compact, lightweight,...

That’s all starting work.

You can watch the video

A little tip. Make sure that the fishing line does not come into contact with solid objects when cutting. With this contact, the fishing line will be cut. And since, in this trimmer, the fishing line is not fed automatically, then you have to stop the work each time, remove the reel and re-release the fishing line.

In my trimmer, in addition to the standard line for mowing the lawn, there is still provided a thick fishing line for mowing coarse weeds. It has the shape of a pigtail, i.e. Three fishing lines are tightly intertwined. Such a fishing line has its own reel.

Thick fishing line

It is stored at the top of the trimmer body.

Spare coil storage space

Installing such a fishing line into the reel is very simple. according to the internal circuit inside the reel. We insert the center of the fishing line with a metal mount at the top of the reel, and draw the ends of the fishing line along the grooves and bring it out.

Reinforced Fishing Line

Such a coil is attached to the trimmer as well as a reel with ordinary fishing line.

Video: How to Refuel a Lawn Mower Fishing Line


When spring comes, people often spend their free time in their summer cottage. With the onset of warm days, they try to rid their area of ​​problems such as weeds and grass. It is difficult to do it manually, especially if the area is very large, so a lawn mower will help. Thanks to this technique, you can trim the grass and remove weeds. this is a suitable device for mowing unnecessary plants near the fence, at home, between the rows in the garden on a flower bed and so on. Read about how to choose a lawn mower that is right for your needs. The cutting element in this device is a fishing line (strong polyethylene thread), which is wound on a special element. a reel. But over time, the fishing line wears out and there is a need for its replacement. The article will discuss how to refill fishing line in a lawn mower.

What kind of fishing line to choose to refuel the lawn mower

The thickness of the polyethylene yarn depends on the model of technology and varies from 1.2 to 4 mm. She may be:

  • with a round cross section. this is the most durable material for mowing herbaceous plants;
  • with curly section. used for mowing soft plants;
  • twisted. used for thin grass;
  • professional type, not suitable for all models of equipment.

To change the line on the lawnmower, you need to purchase a cutting thread, which will be ideal for a particular type of mower.

The device of the line in the mower

The arrangement of the element on which the kapron thread is wound is very simple. This element is called a coil. It has two “tracks”. the upper and lower. Between these paths there is a special partition with a recess. A fishing line is wound around these tracks. It must first be pulled through the recess.

Features of replacing fishing line on video.

Replacement Instructions. How to Insert a Fishing Line

It should be noted that the coils in the mowers can be different:

  • for functioning with one antennae;
  • for functioning with two antennae;
  • fishing line should be threaded through the through hole, which is located inside the element.

And do not confuse this part with an extension for a lawn mower on a reel, because despite the similar name they are two completely different elements.

This article will tell you about how much the ZIL 130 dump truck weighs and what this transport is capable of.

Read here //machinspec.com/lesozagotovitelnaya/benzopila/stanok-dlya-zatochki.html how to assemble a machine for sharpening chains of chains with your own hands quickly and easily.

In the first version, it is very simple to wind the cutting element:

  • On the inside of the coil element there is a locking eye.
  • One antennae of the thread is inserted into it.
  • It is necessary to refill the kapron thread in the direction opposite to the rotation of the bobbin element.
  • It will take only from 2 to 4 meters of fishing line. When the winding process is completed, put the small end of this cutting element out and fix it in the groove, which is necessary to fix the fishing line so that it does not unwind during the operation of the mower.
  • If there is no special groove, then the end should be held by hand so that the cutting element does not untwist during further collection of the element.
  • At the last stage, it is necessary to thread the outer end of the thread into a special hole located on the outer part of the element. After that, the coil can be inserted into the mower.

When the roller works with two ends of a polyethylene thread, then the following steps must be taken to fill the line into the mower:

  • Inside, the reel will show how many recesses there are for winding (two or one). If there is one recess, then both ends of the thread will be laid along this recess. If there are two, then the antennae are laid out separately. each in its recess.
  • It is necessary to rewind from 2 to 4 meters of polyethylene thread and thread its two ends into the hole.
  • Wind both threads in the same direction as the drum rotates.
  • When all the fishing line is wound, the ends should be fixed in the grooves or held by hand.
  • Both ends are threaded into the eye on the outside of the roller housing.
  • After that, the drum is assembled and inserted into the mower.

Tips and steps for replacing fishing line on a video.

The coil element or roller may have a completely different design than the previous two options. The line can be threaded through the eye, which is through and located inside the reel. In this case, it is not necessary to disassemble the roller drum and manually wind the polyethylene thread.

The polyethylene thread is threaded through the hole and rotated by pressing a special button. This the button is located on the body and is designed to operate the equipment, to be able to produce fishing line as it wears.

Safety precautions

For quick and safe replacement of fishing line on the reel of the mower, safety precautions must be observed. Before removing the reel in order to wind the line onto the lawnmower, it is necessary to disconnect the equipment from the power supply (if the mower is powered by electricity). Here I want to mention the reliability rating of electric lawn mowers, which will help you choose a safe assistant.

Another important safety rule that must be observed is pressing the lock button. You can find out its location on the equipment body using the instruction manual. For example, the manual for a gasoline mower can be found here.

Do not forget that the cutting element must be adjusted. There is a tuning button on the unit body. If the process does not start automatically and the thread tension loosens, then the button is clamped and the line is pulled out of the reel with force.

Watch the video instruction.

Summary

If there is a summer cottage or a large plot of land near your individual house or cottage, then for the convenience of cleaning grass and weeds, you must use a lawn mower. If you are thinking of choosing an electric lawnmower or gasoline, then click here and you will find comparative characteristics of different models.

Over time, the line on the mower wears out and requires replacement. this can be done independently. Choosing this polyethylene thread is necessary depending on the model of the mower. It is also worth watching about the remaining details of the unit, here for example you will find information about the Craftsman lawn mower knives, which also wear out and can lead to irreversible consequences.

The spool device into which the fishing line is inserted is very simple. But it differs depending on whether the spool works with one or two thread antennae. It is important to observe safety precautions when replacing fishing line in the reel.