How to refuel the head of a champion trimmer. • CIMFLOK.COM

How to install a fishing line for a trimmer coil for a champion grass

The main elements of the trigger is a mowing spike, which is a cylindrical case with a coil inserted inside (bobbin). A fishing line for a trimmer (cord) is refueling into it. The heads differ from each other in the method of supply and refueling of the cord. There are three types of heads in total:

Automatic. The fishing line is submitted after that, as the user reduces engine speed. Automatic supply of the cord is very convenient when you need to do a large amount of work. The minus of such a head is a large thread consumption.
Semi.automatic. The use of such a head does not require the user to perform any complex manipulations. The principle of its operation is arranged so that the fishing line for a trimmer begins to automatically lengthen at a time when a trimmer for grass works at full speed. It is only necessary to slightly hit the apparatus with the head on the ground (this will remove the locking of the fishing line), and the cord due to centrifugal force will move out of the bobbin. Then the fishing line for the trimmer is cut to the required length with a knife, which is located on a protective casing.
Manual. To lengthen the cord, it is necessary to stop the device. After that, the fishing line for the trimmer will need to be pulled manually.

Trimmer coil device for grass

Cassyle heads for trimmers come in different designs. both simple and complex. The figure below shows a semi.automatic trimmer head from the Husqvarna motorcycle (Husqvarna).

This type of head is present in the configuration of most benzocosyles and electrimmers such as Stihl (Stihl), Patriot (Patriot), Champion (Champion), Bosch (Bosch), Huter (Huter) and others. The device of the braid head is quite simple. It includes the following details:

the base of the mowing head;
button for semi.automatic supply of the cord;
Spulk (coil), into which a fishing line for a trimmer is refuel;
spring;
eyes. through them a fishing line for a trimmer goes outside;
trimmer head cover;
Trimmer fishing line (cord).

There are also simpler trimmer heads shown in the next photo.

All these nozzles do not allow you to change the length of the fishing line in semi.automatic mode (after pressing the button). In the case of a break in the cord, you have to stop the mower and change it manually.

The fishing line for the trimmer does not extend automatically

If, with a light blow, the trimmer coil button for grass on the ground is not lengthened for a trimmer, then the reasons for this may be the following.

Option 1. there was a snack, t.e. Squeezing the cord between turns. This problem usually appears if the user wound a fishing line for a trimmer to the coil unevenly, with the intersection of the turns, or wound it with insufficient tension. In the latter case, when the mowing head is rotated at large revolutions under the influence of centrifugal force, the cord begins to drag on, as a result of which the interitral clamping of the fishing line is possible. To eliminate the problem, you will have to disassemble the coil on the trimmer and rewind the cord correctly, that is, with even turns with good tension.

Option 2. too short ends protrude from the head. A fishing line for a trimmer may not exit when hitting the ground, if its ends sticking out of the head, insufficient length (short). In this case, the centrifugal force is not enough for the fishing line for the trimmer to stretch. Therefore, it is required to stop the unit (drown out the engine or turn off the ethletric trimmer for grass from the network) and pull the fishing line for the trimmer manually, after pressing the button.

Option 3. a fishing line for a trimmer was soldered inside a mowing head. This leads to the fact that the coil is stopped and does not spin when the button is pressed. Basically, this happens for several reasons: poor quality of the cord, overheating of the coil with prolonged operation of the unit, a fishing line on solid items.

In the first case, the cord of third.party manufacturers can be made of low.quality and fusible materials that do not withstand the mechanical and temperature load. Therefore, preference should be given to “branded” fishing.
But, if you still purchased a fishing line for a trimmer of unknown quality, and it is often soldered during operation, then you can follow the example of some users who, after refueling the cord, moisten it either with silicone grease (from the spray can) or mineral oil). This procedure greatly reduces the likelihood of soldering a fishing line among themselves.
Also, a fishing line for a trimmer can sleep if during a mowing it hit a hard object (stone, fence, dry branch, etc.D.). As a result of this, it is slightly stretched and draws back into the head with high speed. The cord is heated from friction, and its turns are sticking together. The only thing that can be done to eliminate this malfunction is to open a trimmer coil for grass and rewind a fishing line for a trimmer.

How to wind a fishing line for a trimmer coil for a champion grass

To replace the fishing line in the trimmer, cut a piece of material of the desired size, folding it in half. One of the halves should be 5-10 cm longer than the second.

In order to correctly wind the fishing line for a trimmer to the coil, the middle of the thread, folded by a loop, you need to place in the groove of the central partition. One half of the forest is tightly wound on the upper part of the part, the second. on the lower. A longer part is wound on the bottom. Winding is carried out in the direction opposite to the direction of rotation of the head. An arrow should be drawn on the lid or side of the head. it shows the direction of rotation. It is necessary to wrap the forest in the reverse arrow direction. Do the job carefully, tightly pressing the turn to the turn.

Insert the remaining ends with a length of 10-15 cm into the slots on the upper side of the coil, this will fix them. The coil is not unwound with fixed ends.

If you do not have a fishing line of the desired length, you can wind the forest with more than one piece, but two. In this case, bend the end of the forest with hook and insert it into the slot of the central partition of the bobbin. Do the same with the second piece. Now wrap first a piece first, and then the other to your half of the coil against its direction of rotation.

To refuel a fishing line for a trimmer in a trimmer for grass, insert its ends into the holes of the mowing head and pull them out. Plant the coil on the axis and push down so that it sat in its place, and again pull the ends of the cutting thread to pull them out the entire length.

The ends brought out should almost reach the protective casing. Cut the excess. To do this, you can use the steel plate installed on the casing, which plays the role of a knife and automatically cuts a fishing line for a trimmer of excessive length when promoting the head.

Bobina closes with a protective lid. Put it in place and press it down to the click that the latch will be published by falling into the grooves. Always check whether the cover has stood on the trimmer for the grass and whether the latches snapped, otherwise it may jump off during operation. In this case, the reel will throw the reel force.

Do not try to wrap the material as much as possible. in this case, the coil may not fall into place and there will be problems with the installation and fixation of the lid. It is better if the coil is filled with wood so that it does not go beyond the dimensions of the details.

In addition to mechanical braids with two blades, there are also models with one. Their differences are that the cutting thread is displayed only on one side. The coil in such versions of the braid may not have a central partition, instead of it, a slot in the lower side is used to install a non.working end of the thread, there is also a slot for fixing the working end in the upper.

With a replaced forest, you can start work. Do not mow thick weeds and bush branches. this is not work for braids for grass. In order to avoid injuries and a break in the forest, make sure that stones and branches do not fall under the braid.

To download the lawn of one refueling coil with a reinforced fishing line is enough for an area of 400-600 m2.

After the cutting thread as a result of the work is worn out, turn off the braid and remove the lid on the mowing head. Pull out from the slot of the forest, stretching it to the desired length, and insert it again in the slot. The amount of material wound on the coil is enough for 5-10 cycles of work depending on the model of the device. When you install the lid in place, carefully look at whether the grooves were clogged where the latches are inserted, if they are clogged, then carefully clean them.

When the fishing line for the trimmer is worn out, you need to disassemble the braid head again, pull out the coil and wind up the work fishing line for the trimmer again.

trimmer for grass gasoline

Small mobile devices for cutting grass and young branches consisting of a bar, a motor, cutting part and a handle are called a trimmer.

The device of the bezinotrimmer is simple, it is easy to disassemble, if necessary

There are electrical and gasoline modifications. The former is not refueling fuel, but they depend on the length of the cord. The second work regardless of the availability of electricity, anywhere in the garden or garden.

Gasoline trimmers for grass are easier and cheaper than lawn mowers. They cope with grass and shrubs, so such mowers are used in everyday life and on an industrial scale. For convenience, the technique provides belts that are worn on the shoulder. Thus, the load on the hands and back decreases.

Types of coils: how to charge each of them?

There are 4 types of coils, for each of which their own methodology for winding the cord is used:

Below we consider how the fishing line for a trimmer is inserted and put on for each of them and how to wrap it.

Mechanical collapsible

These trimmer heads consist of two or three parts connected by thread. to the upper part are screwed either the lower or fixing the screw holding the lower part.

unscrew the lower part of the trimmer head or twist the fixing screw, use the key supplied with the coil;
Remove the remains of the old fishing line;
Cut pieces of the necessary length;
Place the segments on the upper part, then cover them with the bottom and fix them using a standard key.

Mechanical non.devastated

There are 2 varieties of these heads:

We describe how to refuel and wind a fishing line for a trimmer into indiscriminate coils of both types and how to fix the cord on them.

The advantage of the coils of the first type is that they are leaning to spend a fishing line for a trimmer, because after the protruding fragments are eager or tore off, it is enough to rewind a little cord and pass it out through the corresponding holes.

With coils where there is no such cavity, the situation is different, the string is held in them due to the bend between the input and output hole.

That is, the total length of the fishing line consists of the length of the protruding fragments and the site passing through the coil and is 7-10 cm.

To charge the coil with a cavity, do this:

If you have already used such a head, then cut a piece of fishing line of the required length, if not, wrap the cord to fill the cavity, moving both ends towards each other, then cut the cord, leaving pieces a little more on the outside;
Draw a fishing line for a trimmer through the opposite holes;
Cut the pieces of string to the required length protruding outward.

To charge a coil without a cavity, consider that a minimum of vibrations will be only with four protruding “tails”, which means two fishing line segments.

Cut 2 pieces of cord to length, necessary taking into account the method of their attachment, then act in one of two ways:

Insert each segment into the hole, draw past the location of the nut and remove through the corresponding hole;
Bend the string segment in half, then insert simultaneously into both holes from the inside of the coil.

How to properly tie a fishing rod (bobbin) of the lawn mower without disassembly, shown in the photo above.

Semi.automatic

The order of action, how to refuel a fishing line for a trimmer in a semi.automatic coil:

Squeeze the clamps on the side surface of the case with your fingers (it is often written on them “push”);
Carefully remove the lid;
Pull the spool propagating its spring and washers;
Remove the remnants of the old string from the spray;
Cut a piece of fishing line of the required length;
Fold the cord in half, forming a small loop on one edge;
Insert this loop into the slot of the partition dividing the spool into two sections;
wrap both halves of the strings, each in your section, the direction of winding depends on the type of trimmer for the grass, but always corresponds to the direction in which the coil is wound and the opposite of the rotation of the coil is rotated, if you do not know which way it is spinning, focus on the arrow. drawn on a rogue or lid;
when 10–20 cm cord remains outside, draw it through the slots of the corresponding size in the spool designed to fix the fishing line during the charging of the coil;
draw the edges of the fishing line each through their hole in the coil body;
Install the spring, rogue and washers in the case;
Pulling the spool with your finger, pull the pieces of the cord sticking out of the case to straighten it inside the coil and remove it from the slots;
put on and snap the lid;
Strongly pressing the button with your finger, pull out a little fishing line again to completely straighten it inside the case;
Cut the protruding “tails” to the required length.

The photo above shows how to put a fishing line for a trimmer in a slot.

Automatic

Winding and an integral refueling of fishing line in this type of coils occur as follows:

If there are lines of the fishing line on the rogue, then either soak it by turning the button against the arrow drawn on the lid, and pulling the cord, or remove the lid, as described above, pull out all the parts of the mechanism outward and remove the fishing line for a manually, then collect everything as It was;
Combine the tags on the button and the lid, then make sure that the holes in the body coincided with the canal inside the spool;
Cut a piece of fishing line of the required length (usually 3-4 m);
Insert the string and stretch it so that 2 pieces of the same length are obtained;
Turning the button towards the arrow on the lid, wrap the entire cord on the spool, leaving pieces of the length required for mowing;
If necessary, cut the sticking fragments to the desired length.

Another scheme of proper winding and refueling of the fishing line on the reel (head) of an electric trimmer for the grass is described in the video below:

How to properly wind a fishing line for a trimmer on a spool of any trimmer for grass, including electric:

How to properly charge a fishing line for a trimmer into the head of a cutting tool and how to refuel it into a trimmer for grass, including in a trimmer ethletric for grass (electric ships):

Sometimes you need to install a new coil instead of a failed, and the next video on how to correctly install the head on one of the models of electric trimmers for the grass:

How to Replace the Spool on a Weed Eater SG11 String Trimmer (Part # 952701663)

With visual examples, it becomes more clear how to properly put a fishing line for a trimmer to the coil of an electric trimmer for the grass before putting it in a mower and start the device.

String. consumable for a trimmer for grass, so it often has to be changed. The improper implementation of this operation not only greatly complicates the process, but also often increases the consumption of the material.

over, for each type of trimmer head there is its own procedure that provides the best result. Now you know how to correctly change the fishing line for a trimmer for a knife for a lawn mower, put a disk on the device and you can quickly perform this operation on any coil.

Tips and recommendations how to wind a fishing line for a trimmer and what you need to know

There are several useful tips and recommendations that it will be useful to find out not only beginners, but also experienced masters-codes. These tips will help prevent negative consequences in the form of injuries and improper functioning of the mechanism. These recommendations say the following:

Set the lid to clicks. over, these are 2 or more clicks, which depends on the number of fixers. If one latch does not click, then when starting the tool, the drum can jump out and injure a person
Do not wrap a fishing line for a trimmer with its strong pulling, as well as in an amount more than you can insert it into place. It is better not to harvest the equipment than it will be more, as this will lead to negative consequences in the form of the impossibility of unwinding it if necessary
If you own the tool not with two conclusions of the fishing line, but with one (usually low.power units), then the winding process is performed in a similar sequence, as described above, only with the difference in the absence of the average side between the extreme bases of the coil
After replacing the material, it is necessary to first check the tools of the tool, and then proceed to the mocking of the grass. If you do not make a preliminary check, then the forests can be unwound, and injure a person

It is interesting!Choose the material of the appropriate quality so as not to get injuries when working with benzo.cards, trimmers and motorcycles. In the process of beating grass, small stones and other materials fall under the rotating parts, which can fly over long distances, therefore, despite the fact that the fishing line for a trimmer is not a knife, working with a tool should be carried out in protective special uniforms. The result of the work done is as follows. after the replacement of the new material is enough for an area of up to 600 square meters, but when taking into account the presence of a reinforcing layer on the fishing line

Ordinary nylon materials serve less, which is important to take into account when working. Do not try to mow thick.button grass with fishing line, as there are special metal wheels or knives for this

Tips and recommendations how to wind a fishing line for a trimmer and what you need to know

Set the lid to clicks. over, these are 2 or more clicks, which depends on the number of fixers. If one latch does not click, then when starting the tool, the drum can jump out and injure a person
Do not wrap a fishing line for a trimmer with its strong pulling, as well as in an amount more than you can insert it into place. It is better not to harvest the equipment than it will be more, as this will lead to negative consequences in the form of the impossibility of unwinding it if necessary
If you own the tool not with two conclusions of the fishing line, but with one (usually low.power units), then the winding process is performed in a similar sequence, as described above, only with the difference in the absence of the average side between the extreme bases of the coil
After replacing the material, it is necessary to first check the tools of the tool, and then proceed to the mocking of the grass. If you do not make a preliminary check, then the forests can be unwound, and injure a person

The result of the work done is as follows. after the replacement of the new material is enough for an area of up to 600 square meters, but when taking into account the presence of a reinforcing layer on the fishing line

Ordinary nylon materials serve less, which is important to take into account when working. Do not try to mow thick.button grass with fishing line, as there are special metal wheels or knives for this

Publications

How to remove and replace the coupling on a chainsaw. repair and adjustment

Chain on the chainsaw how to choose and what you need to know

Is it possible to make a tachometer for a chainsaw yourself or the process of adjusting the carburetor

Cleaning a trimmer carburetor for grass: a detailed description of the process

Which line for trimmer is used for a trimmer for grass?

The type of cross section of the cutting thread should correspond to the vegetation that needs to be mowed.

If you need to change the fishing line for the trimmer, then you need to select specifically the type that is recommended by the manufacturer specifically this model of the trimmer for grass, in other words, the thickness of the cutting thread should be suitable for the power of the motor and the size of the unit.

It is better to choose a specialized cutting thread. It is worth soaking a fishing line for a trimmer for some time if you plan to change it in a coil.

After soaking, it acquires an elastic look and becomes stronger.

The cutting thread can be made of various components. Often found in the middle of them. nylon.

EASIEST WAY TO STRING YOUR WEED EATER

This material is characterized by the highest degree of wear resistance, the ability to withstand different temperatures and the highest loads.

A fishing line for a nylon trimmer can be stored for a long time, it does not dry out and does not lose its hardness.

Therefore, its service life can be quite long.

Coils or heads for motorcycles have a different structure:

How to refuel a fishing line for a trimmer for Champion grass

Warranty production of the factory refueling of a trimmer for the grass will be in demand to change fishing line. Having a very indicative idea of what is really, how to fill the fishing line for a trimmer to the coil of a trimmer for grass without the help of others, the brand new without hunting take up this matter. But with some abilities, the development of this simple science does not represent any difficulties, and the similar annotation presented below will greatly facilitate this common hearing process.

First, for winding the fishing line, it is necessary to remove the coil (bobbin, spool) from the trimmer for the grass. certain acts will depend on the difficulty of configuration and the type of product itself:

Small electronic trimmers for grass with a working location of the motor and coils in the bottom, you have side buttons on both sides of the bobbin. With the simultaneous press there, the highest part of the coil, coupled with the internal contents for winding the fishing line, is disconnected, although the lower one remains on the trimmer. The analysis of the bobbin is better to create in an even smooth place, so that the spring entering the design does not jump out of it;
Electronic and gasoline trimmers for grass with a curved rod without the ability to install a knife, you have coils with a special lamb: in similar structures, you should hold a spool in a motionless position with one hand, and turn the fixing bobbin on the stalk a barack nut. After disconnecting the nut, the whole bobin is removed.
Electronic and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, the screwdriver is inserted into this hole as it is also called another suitable object and, with unhurried rotation, such mutual placement is achieved when the screwdriver enters the openings, and the bobbin is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

How to replace a fishing line for a trimmer champion t266

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.bona coils, the fishing line for a trimmer extends into the through hole, its ends (antennae) are folded together and aligned, then they are wound in the back of the rotation of the bobbin on the bar the side. the arrow of the arrow is exaggeratedly indicated the correct direction of the winding. In the presence of fixing grooves, the ends of the fishing lines are threaded there in other words, hold the fingers of the free hand, spread into the through hole of the outer half of the bobin, the spool is locked and attached to the bar of the trimmer product.

The difference in the winding of the fishing line in the two-drummer coils is that the line of the fishing line 2-5 m long is in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves. Both strains of the fishing line are wound up who on their own groove, fixing antennae and assembly of the coil is similar to the option considered above with one groove.

The 1st implementation of this process, you will seem long and quite labor-cost, but over time and experience, this problem will be solved significantly more frequent and easier.

The video below will clearly show how to tuck a fishing line for a trimmer to the coil of a trimmer for the grass and correctly wrap it. this operation is not any difficulties and, with some patience, will certainly be crowned with a furorur:

There is a type of coils where the automatic mechanism performs winding without the help of others. from the user it is quite true to season the fishing line for the trimmer. The fishing line for the trimmer is passed through the hole on the inside of the case, its antennae without winding are tied through the hole on the outer case, the bobbin is assembled, and when rotating the winding button for the trimmer, the snitches are wound without the help of others. It is unrealistic to make the winding erroneous in such a spool: the mechanism itself will determine the correct direction, since it can only spin in one direction.

Option

In this version, the head is twisted onto the gear shaft. To remove it, you need to fix this shaft. To do this, in such trimmers, for example, in the Huter and Champion devices, a hole is provided through which you can insert either a thin screwdriver or a metal rod.

So, to remove the bobbin, take 2 simple steps.

Insert the screwdriver into the hole and stall the shaft.
Take the head of the head and start twist it clockwise. It should be twisted in this direction for the reason that the thread cut on the shaft is left.

Champion T525 Trimmer. Fields of Application of the Model

The basic equipment of the Champion bushrer consists of a reliable two.stroke engine, a high.quality Japanese carburetor, a hard, indifferent rod and a reliable gearbox. A reliable spring return starter is responsible for launching an internal combustion engine. To cool the motor, the manufacturer has provided an effective supply air system.

High reliability and durability of the CHAMPION Kustorez allows you to use it for cutting dense thickets, thick weeds and dry wild shrubs.

Standard motor power. 1.9 l. From.;
Tank capacity for refueling. One litre;
Maximum Possible width mowing when using fishing line. Forty cm;
Cut width when using a knife. Twenty.five cm.

The model is released by a relatively low noise level. With intensive operation of the engine at maximum speed, this trimmer for grass does not exceed one hundred and seven dB.

How to refuel a fishing line for a trimmer for Champion grass

Small electronic trimmers for grass with a working location of the motor and coils in the bottom, you have side buttons on both sides of the bobbin. With the simultaneous press there, the highest part of the coil, coupled with the internal contents for winding the fishing line, is disconnected, although the lower one remains on the trimmer. The analysis of the bobbin is better to create in an even smooth place, so that the spring entering the design does not jump out of it;
Electronic and gasoline trimmers for grass with a curved rod without the ability to install a knife, you have coils with a special lamb: in similar structures, you should hold a spool in a motionless position with one hand, and turn the fixing bobbin on the stalk a barack nut. After disconnecting the nut, the whole bobin is removed.
Electronic and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, the screwdriver is inserted into this hole as it is also called another suitable object and, with unhurried rotation, such mutual placement is achieved when the screwdriver enters the openings, and the bobbin is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

How to replace a fishing line for a trimmer champion t266

The 1st implementation of this process, you will seem long and quite labor-cost, but over time and experience, this problem will be solved significantly more frequent and easier.

The video below will clearly show how to tuck a fishing line for a trimmer to the coil of a trimmer for the grass and correctly wrap it. this operation is not any difficulties and, with some patience, will certainly be crowned with a furorur:

Option

So, to remove the bobbin, take 2 simple steps.

Insert the screwdriver into the hole and stall the shaft.
Take the head of the head and start twist it clockwise. It should be twisted in this direction for the reason that the thread cut on the shaft is left.

How to remove the head of a trimmer for grass: Basic rules

It is necessary to remove the trimmer head, adhering to the elementary rules in working with a motorcycle and an electric counterpart, and the main ones we will call:

Jam the gearbox for unscrewing the head with a special hexagon or neatly screwdriver, immersing it in a special hole

The latter can greatly clog with grass and merge with a common color, therefore. delicately clean and find it; It is necessary to jam so that the shaft does not turn; Especially carefully work with the dismantling of a broken or cracked coil. its elements can be everywhere; Many users of a benzo.wrap today are looking for a “trimmer for grass to remove the head” today, and in instructive articles and videos we also make Accent on different types of threads. take into account the nuances of your tool; For ease of work, it is practiced to turn the tool down down the engine, laying on a horizontal surface; Shock and sharp efforts attached when removing the mowing head are inappropriate, since the plastic delicate case can be damaged; Install a new coil or old, if it is still suitable, you need to be a cleaned tool. The new tackle must meet the parameters of the old. Installation of another component, the characteristics of which do not meet the power of braids for grass, can negatively affect its elements and the operation of the mechanism as a whole; We recommend working with a cleaned tool to avoid getting garbage and small particles of grass into the holes; Blocking the gearbox by threading into the groove of the screwdriver is a mandatory procedure when installing a new coil or removing the old; Remember the prevailing of the left thread on the gearbox of most trimmers; Do not forget to remove the screwdriver from the groove groove at the end of the installation of the coil in place; All fixations and removal must be carried out delicately, remembering that the coil is made of thin plastic; It is not worth it to tighten the new coil (or the old one in its place), since after the working hours it will be impossible to remove it at the next time withdrawal

It is also not necessary to fix too easily. weigh the load laid on this node during operation and the resistance of the cutting material; If you need to determine a knife or spool instead of a trimmer for a trimmer for grass. analog cutting tackle, then the gearbox block is also carried out, twisting is carried out according to the same scheme, but the installation itself is slightly different due to the specifics of each individual gear. Mount the knives on a trimmer for grass with a coil if the tool functionally works with different types of gear.

What is needed to replace the cord

With the constant use of a trimmer for grass for begging grass, the discs are blunting, but they can be sharpened and continued to operate. The fishing line for a trimmer in the coil has the ability to end, therefore there is a need for refueling the latest, why you need to find the type of head and prepare the cord of the desired thickness and length.

So, the mowing head is a cylindrical body, in which the bobbin is located. Such a part is located both on electritrimers and on gasoline braids of all brands, whether it be Bosch, Makita, Stihl or another brand. Heads are 3 types depending on the method of refueling and feeding the fishing line.

The mechanism of operation of the heads of the automatic group is that they serve a fishing line for a trimmer without the help of others, when a mowing reduces the engine speed. Such designs are comfortable when working in huge areas, but they have a defect. a large cord consumption. The heads of the automatic group are ordinary in operation. automatic fishing is carried out at the highest revolutions of the motor

To remove the cord lock, you must carefully tap on the ground with the inventory, after which the unlocked thread is extended from the coil. A sawn.off shotgun is made by a knife fixed on a protective casing. Trammers for grass with manual supply of the cord must be turned off earlier, after that, without the help of others, remove the fishing line for the trimmer.

Coils for electronic and gasoline braids can be with one or 2 antennae of fishing line. The 1st is used to trim low herbal shoots, the 2nd-for the bevel of the highest grass and small shrubs.

On a reel coil

Wrap a fishing line for a trimmer to a coil with one osik is not at all difficult. In such designs, depending on the brand of a trimmer for grass, it is placed from 2 to 5 meters of the cord. The edge of the fishing line in the rogue must be tucked into a special hole or a groove, after which the string is wound to the side, reverse the rotation of the coil during operation.

After the fishing line for the trimmer is windpoint, you need to throw a small piece (15-30 cm), pass the spool into the output and collect the head of the ground.

Large fishing line

Typically, a fishing line for a trimmer ends very rapidly, if you knock on the ground all the time to the ground or with an effort to press it to the surface. In this case, the head is unlocked, the cord is lengthened, and the knife cuts it. The 2nd version of the brisk consumption of fishing line is a trimmer for grass with an automatic coil is incorrectly used. If the mower often lowers the engine speed, the string is forever lengthened and trimmed and ultimately is rapidly consumed.

Two working antennae

In this type of squelpies, you should find the number of grooves for winding the fishing line lying on the inside of the coil:

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.capanal coils, the fishing line for a trimmer extends into the through hole, its ends (antennae) are folded together and aligned, after which they are wound in the back of the rotation of the bobbin on the bar the side. the arrow of the arrow is exaggeratedly indicated the correct direction of the winding. In the presence of fixing grooves, the ends of the fishing line are threaded into them or hold the fingers of the free hand, spread into the through hole of the outer half of the bobin, the spool is locked and attached to the bar of the trimmer product.

The difference in the winding of the fishing line in the two-drummer coils is that the line of the fishing line 2-5 m long is in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves. Both strains of the fishing line are wound each on their own groove, fixing antennae and assembly of the coil is similar to the option considered above with one groove.

The 1st implementation of this procedure may seem to be long and quite laborious, but over time and experience, this problem will be solved significantly more freaky and easier.

The above will clearly show how to tuck a fishing line for a trimmer to the coil of a trimmer for the grass and correctly wrap it. this operation is nothing complicated and, with some patience, will certainly be crowned with a furorur:

In practice, installing a regular fishing line is justified if the user is going to mow grass near the fence, especially if it is made of a grid. In this case, to protect the standard and sometimes expensive cord from wear, it is replaced by a fishing line for a trimmer, which is not al-ko. Usually, to replace the cord for fishing line, it must be selected with the largest thickness-2-3 mm.

Self.manufacture of bobbin

Quite often, a trimmer for grass is operated in the distance from places where you can purchase spare parts for a spitt with its breakdown. In this case, instead of a broken mechanism, you can install a simple coil made in design made by yourself. To do this, you need a sheet of plywood (textolite, metal, etc.), eyes, screws or screws. The process includes several stages.

A disk is cut out of the plywood sheet, which corresponds to the failed spool with a diameter.
A hole is drilled in the center of the disk, which matches the diameter with a shaft of a trimmer for grass.
Small eyes are attached to the opposite sides of the disk, which will serve to refuel the fishing line.
Through the eyes, pass the fishing line for the trimmer and fix it with ordinary screws or screws. The coil is ready for work.
Clutching the made bobbin between the two washers, it is attached to the shaft of the trimmer for the grass with a nut.

To replace the fishing line on a home.made bobin, you will have to release fixing screws, insert a new section of the string and tighten the fasteners again. It is not necessary to remove the coil from the shaft of the trimmer for grass, however, it is necessary to exclude the possibility of spontaneous launch of the motor.

So, above was step.by.step with the pictures described methods of repairing the string head. As you can see, the process is not complicated. And most of the breakdowns are directly related to the inaccurate refueling of the string and its unsatisfactory quality. You can clearly see all the stages of the process on the video.

Sources:

https://domdetaley.ru/kak-ustanovit-lesku-na-katusku-trimmera-Champion/
https://101benzopila.ru/kak-namotat-lesku-na-katusku-trimmera-cempion/
https://rcycle.net/drevesina/trava/motokosy-i-trimmery/leska/kak-namotat-na-katushku
https://rcycle.net/drevesina/trava/motokosy-i-trimmery/benzinovye-ustroystva/kak-pomenyat-lesku
https://molibden-wolfram.ru/kak-pravilno-namotat-lesku-na-trimmer-Champion/
https://domdetaley.ru/kak-pravilno-postavit-lesku-na-trimmer-Champion/
https://101benzopila.ru/kak-pravilno-postavit-lesku-na-trimmer-Champion/
https://101benzopila.ru/kak-razobrat-trimmernuu-golovku-Champion/
https://domdetaley.ru/kak-snat-golovku-trimmera-Champion-et451/