Lawn mower tank size. Honda Lawn Parts Blog • CIMFLOK.COM

Honda Lawn Mower Disassembly (Model #HRR2167VXA) – Lawn Mower Repair Help

Fuel System Tips for a Honda HRR216PKA Mower

Having problems with your Honda HRR216PKA mower? It might be the fuel: it’s the most overlooked part of maintaining small engine equipment, yet it’s also the source of the most common problems. Here’s what you need to know to maintain the fuel system on your Honda from day-to-day operation to long term storage.

Buying and Storing Fuel

The engine in the HRR216PKA is designed to use automotive unleaded gasoline. This fuel should contain no more than 10% ethanol (E10.) Why? Ethanol is very hygroscopic, which means it absorbs water. Fuel with higher concentrations of alcohol will gather water from the air at a rate that can make the fuel hard to ignite. Over time, this moisture can cause corrosion of the fuel system.

Gasoline should be used within 30-60 days after purchase; it ages faster during the summer due to heat, so more frequent replacement is necessary. If it will be stored for longer, add a fuel stabilizer. Remember: fuel stabilizers cannot revitalize stale fuel, so treat the fuel when you first purchase it.

Fuel will go stale faster when exposed to air, heat and sunlight. For this reason, gasoline should be kept in an approved gasoline container with a tight seal to reduce contact with oxygen and moisture from the air; if the container has a vent, make sure it is kept closed. Remember that this mower only holds about 1/3 of a gallon of gasoline in its tank, so there’s no need to keep a large tank of fuel on hand. The fuel container should be made of plastic, as metal gas cans can contaminate the fuel with rust. It should be stored in a place where it won’t be in direct sunlight. After mowing, turn the fuel valve to “OFF” and fill the gas tank. This will limit exposure to air and limit oxidation.

Storing for Three to Four Weeks Before Next Use

Again, it’s important that the fuel tank is full and the fuel valve is closed to limit air exposure. While the gas inside the tank should last, the fuel left in the carburetor will age quickly due to heat from the engine and exposure to air. To empty the carburetor, make sure the fuel valve off, start the engine, and let it run until it’s out of fuel. This should take about three minutes.

Storing One to Three Months Before Next Use

If the fuel wasn’t already treated, add a fuel stabilizer to the tank. With the fuel valve set to “ON,” let the mower run for 10 minutes. This will ensure that the treated fuel has reached the entire fuel system. Shut off the engine, turn the fuel valve to “OFF,” and start the motor again. Let it run until it dies to remove any fuel left in the carburetor.

Storing than Three Months

Even stabilized fuel will only last about three months, so all fuel should be removed from the mower. To do this, leave the fuel valve on and let the engine run until it has burned all the fuel in the tank, lines and carburetor.

Dealing with Stale Fuel

Have some fuel left in storage that you don’t want to use in your mower? The EPA recommends putting it in your car’s fuel tank when it is already mostly full. Since it will be diluted with fresh gas, it won’t be as stale as it would be if used straight from the container.

Where to Buy Honda Mower parts

Anything you need to keep your Honda mower running from fuel lines to carburetors and even fuel stabilizer can be ordered off the web from hondalawnparts.com. Honda Lawn Parts is a certified Honda Small Engine Equipment dealer. It’s not just a warehouse, it’s part of a real brick and mortar store that sells and fixes equipment like this HRR216PKA mower. That means support from an experienced sales staff that knows Hondas inside and out. Shipping is easy, too, with coverage across the U.S. and Canada.

How Much Gas Does A Lawn Mower Use?

When it comes to maintaining a pristine lawn, a lawnmower is an essential tool for any homeowner.

But have you ever wondered how much gas your lawnmower uses?

The amount of gas a lawnmower uses can vary depending on several factors, including the size of the mower, the type of engine, and the terrain of your lawn.

For example, a push mower with a smaller engine will typically use less gas than a riding mower with a larger engine. Additionally, if your lawn has a lot of hills or rough terrain, your lawnmower may use more gas to power through those areas.

Understanding your mower’s fuel consumption can help you better budget for your lawn care expenses.

In this article, we will explore the factors that affect how much gas a lawnmower uses and provide some tips on how to maximize your lawnmower’s fuel efficiency.

Whether you are a seasoned lawn care pro or a new homeowner looking to maintain your lawn, understanding the gas usage of your lawnmower is an important aspect of lawn care.

Gas Usage Per Hour Chart

There are many variables, but the chart below should give you a general idea of how much gas a lawn mower uses on average:

Type of MowerGas Usage per Hour

Push Mower	0.5 – 1 gallon/hour
Lawn Tractor	1 – 2 gallons/hour
Zero Turn Mower	2 – 4 gallons/hour

Please note that the gas usage per hour can still vary depending on the specific model and engine size of the mower.

Factors Affecting Lawn Mower Gas Usage

Lawn Mower Type

The type of lawn mower you use can impact how much gas it consumes.

A push mower typically uses less gas than a riding lawn mower, while a self-propelled lawn mower can use more gas than a push mower. This is because self-propelled mowers have engines that are larger and more powerful, which require more fuel to operate.

Engine Size

The size of your lawn mower’s engine can also affect its gas usage. Larger engines tend to consume more gas than smaller ones, as they require more fuel to operate.

If you have a large lawn or frequently mow grass that is thick or tall, you may need a mower with a larger engine to get the job done in a reasonable amount of time.

However, keep in mind that larger engines can also be more expensive, so it’s important to weigh the costs and benefits before making a purchase.

Terrain and Grass Height

The terrain and grass height of your lawn can also impact how much gas your lawn mower uses. If you have a hilly or uneven lawn, your mower may need to work harder to cut the grass, which can result in increased gas usage.

If your grass is particularly tall or thick, your mower may need to run for a longer period of time to complete the job, which can also increase gas consumption.

Maintenance

Proper maintenance of your lawn mower can also impact its gas usage. Regularly changing the oil, air filter, and spark plug can help ensure that your mower is running properly and using gas as efficiently as possible.

Keeping your blades sharp and tires properly inflated (if applicable) can also help reduce gas consumption.

Average Gas Usage for Different Lawn Mowers

Push Mowers

Push mowers are the most common type of lawn mower

They are typically powered by gasoline engines and require frequent refueling. On average, a push mower uses about 0.25 gallons of gasoline per hour of mowing. This means that if you mow your lawn for an hour each week during the mowing season, you will use approximately 13 gallons of gasoline per year.

It’s important to note that the actual gas usage of a push mower can vary depending on the size of the engine, the terrain of your lawn, and the condition of the mower.

Self-Propelled Mowers

Self-propelled mowers are similar to push mowers, but they have an additional feature that allows them to move forward on their own.

This makes them ideal for larger lawns or for people who have difficulty pushing a mower. On average, a self-propelled mower uses about 0.3 gallons of gasoline per hour of use.

This means that if you mow your lawn for an hour each week during the mowing season, you will use approximately 16 gallons of gasoline per year.

Riding Mowers

Riding mowers are the largest and most powerful type of lawn mower. They are designed for large lawns and are often used by professional landscapers.

On average, a riding mower uses about 0.5 gallons of gasoline per hour of use. This means that if you mow your lawn for an hour each week during the mowing season, you will use approximately 26 gallons of gasoline per year.

Tips to Reduce Lawn Mower Gas Usage

Mow at Optimal Times

Mowing during the hottest times of the day can cause your lawn mower to use more gasoline. It’s best to mow early in the morning or in the late afternoon when the temperature is cooler.

This will not only help you save on gas but also prevent overheating of the engine.

Mow at the Right Height

Adjusting the lawn mower blade height to the correct level can help save on gas. Mowing too low (or too fast) can cause the engine to work harder, which uses more gasoline.

Check your lawn mower manual for the recommended blade height and adjust accordingly.

Keep Blades Sharp

Blades that are dull or damaged can cause the engine to work harder than necessary, which can lead to increased gasoline consumption.

Regularly sharpening the blades can help reduce the amount of gas your lawn mower uses over time.

Avoid Overfilling the Fuel Tank

Overfilling the gas tank can cause gasoline to spill out and potentially damage the machine and your lawn.

Fill the tank to the recommended level specified in the manual to avoid overfilling.

By following these tips, you can reduce the amount of gasoline your lawn mower uses. This can save you both time and money while also helping to reduce your carbon footprint.

AFFORDABLE COMMERCIAL ZERO TURN WITH NEXT GENERATION FERRIS SUSPENSION TECHNOLOGY

The ISX™ 800 is engineered to increase efficiency and comfort. Combining next-generation Ferris® technology. ForeFront™ Suspension with a 2-belt iCD™ Cutting System, means a smoother ride and improved cut.

Click and drag image to rotate.

Cutting Width

Power Rating

Ground Speed

Limited Warranty†

Features

ForeFront™ Suspension System

The system utilizes four upper and lower control rods that ensure the front caster bearing remains vertical through the full range of travel. This controlled motion results in a smoother ride, more precise tracing of the terrain and an improved cut.

EFI-ETC Engine Technology

Select models feature the Briggs Stratton Commercial Series engine with EFI-ETC technology for easy starting and smooth performance.

Integrated Transmission

Commercial Hydro-Gear® ZT-3400™ transaxles, with 7 cooling fans, are designed for high performance and are fully serviceable.

Easy Access

Quick removal of the floor pan provides convenient access to the top of the deck for easy cleaning and service.

iCD™ Cutting System

iCD™ Cutting System was engineered to produce the best possible cut in a multitude of conditions. The ISX™ 800 is equipped with a 2-belt deck and provides a 3-year belt limited warranty (See operator’s manual for complete warranty details).

Mower Spindles

Cast-aluminum greaseable spindles feature 1” shaft with 2.5” x 1” dual ball bearings with top access grease fittings and pressure relief valve.

Ride-On Mower Warranties

Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.

SAVE A TON OF MONEY in repairs by NOT BUYING this NAME BRAND mower.

Miles per Hour

Up to 10 MPH ground speed, reverse 5 MPH.

Specifications

Only 2 products can be compared at once. Please remove one of your selections to compare this product.

Only 3 products can be compared at once. Please remove one of your selections to compare this product.

At least one product must be displayed. Please select another option to remove this product

Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit/adjustable twin steering controls.

4-Year limited warranty (48 months) or 500 hours, whichever occurs first. Unlimited hours during the first 2 years (24 months). Coil-over-shocks and all suspension related components are covered for 5 years (60 months) unlimited hours. Coverage on other components varies, please see operator’s manual for complete details.

All power levels are stated gross horsepower per SAE J2723 as rated by Kawasaki. † See operator’s manual or dealer for complete warranty details. Refer to engine operator’s manual for engine warranty.^ Suggested will vary by market. Set-up, delivery, documentation and destination fees not included. See dealer for details. Features vary by model. We reserve the right to change specifications, features and pricing without notice.

Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit/adjustable twin steering controls.

4-Year limited warranty (48 months) or 500 hours, whichever occurs first. Unlimited hours during the first 2 years (24 months). Coil-over shocks and all suspension related components are covered for 5 years (60 months) unlimited hours. Coverage on other components varies, please see operator’s manual for complete details.

Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit/adjustable twin steering controls.

Temporary Lawn Mower Gas Cap: How To Successfully Make One

A temporary lawn mower gas cap is important if you’ve lost the original. Buying a replacement gas cap can be a great idea only if you don’t need to use the lawn mower immediately.

It is actually quite simple, as homeowners tend to ask, “I lost my gas cap what can I use?” enough to anticipate their needs; given that this seems to happen a lot, we’ve collected all their ideas to make everything easier for you.

Read this article to know how to make yours in the simplest steps.

How to Make a Temporary Gas Cap for Your Mower

To make a temporary gas cap for your mower first understand the purpose of the task, and identify the different materials to use. Then, select the best material at hand, and try to seal a cap that’s the same size, or cover the opening.

– Understand the Purpose of the Task

You’ll have to remember that the keyword we’re using is “temporary.” This means looking for materials that can work for the time being but will not be used as a long-term solution. Usually, the materials can be made from various household items lying around.

– Identify the Different Materials to Use

You might have a suitable material in your household that can be used as a temporary gas cap replacement. Aluminum foil is a great material that is usually found in most household kitchens. While you’re at it, look for rubber bands as well.

Another possible replacement for your mower gas cap is a plastic cap that’s similar in size to the mower’s missing cap. You might have to look a bit harder and collect several as you go.

At the same time, you may need to look for a duct tape roll, rubber bands, or even thread seal tape to do the work tightly. Thread seal tapes are known by other names, such as PTFE tape, plumber’s tape, or Teflon tape.

Plastic bags can also be used as temporary caps for your mower’s gas tank. Look for ones that are thick and will not possibly react with gasoline. Most plastic bags work well with gasoline. However, you need to be cautious as some can break down easily upon contact with gasoline.

Large corks can also work, provided that they securely plug the mower’s fuel tank. Conversely, corks that are smaller than the hole of the tank will not work, unless, of course, you have a small gas opening.

If you have caps from other gas-powered tools, then they can work as long as the caps are similar in size. If you think that the caps from other tools are just slightly larger, they can still work.

In your search for a suitable cap for your gas, you might be tempted to use rags to stuff and plug the hole. While it may stop gasoline from spilling, the rag can also absorb the gasoline inside the fuel tank.

This can cause gasoline to start dripping on the mower deck, but, aside from this, gasoline can also leave a trail on your flooring and grass, which is something you should avoid because it can damage your lawn grass.

– Select the Materials You Have on Hand

Now that you know what materials you should look for and what to avoid, you can begin selecting the ones that best suit your task. If you have more than one option to choose from, you can bring them with you as you go back to your push mower.

Try to manage the task of covering the gas filling area as much as you can, with the material that you have. You may try to check what you have that can be a temporary fix, such as a covering it with a material and then tightening it with some thin rope because you don’t want to seal it with plastic bands that can snatch it off.

– Try to Seal A Cap That’s the Same Size

If you found plastic caps around your house roughly the same size as the missing gas cap, then check if they fit. If the caps are a bit loose, wrap some thread seal tape around the threaded gas tank opening.

The thread seal tape will help make the cap fit better over the tank opening. If you want to secure it even more, wrap some of the thread seal tapes over the plastic caps. Alternatively, you can use duct tape over the plastic caps as well, as long as the tape is well secured, you will be fine when using it.

Assuming that you have found a cork large enough to keep the gasoline inside the fuel tank and prevent it from spilling, then use it as a replacement. Otherwise, if the cork is too small, it can’t work as an effective replacement material.

You can easily borrow caps from other gas-powered tools as long as they fit well over the gas tank cap opening. If the borrowed caps are slightly larger, use thread seal tapes to secure the caps.

To doubly ensure the borrowed cap is prevented from coming loose, loop it with more thread seal tape. As an alternative, you can use duct tape to secure the fuel cap.

– Cover the Opening

Plastic bags cut down to size to fit the gasoline tank opening can work in a pinch. Similar to using aluminum foil, cover the fuel tank cap opening with an appropriately sized plastic bag.

You can use more pieces if you feel that one may not be enough. You’ll need to remember that some plastic materials can react negatively when in contact with gasoline. When using plastic bags as coverings, try to be as secure as you can until you buy the correct cap that will cover the gas port, immediately.

If you selected aluminum as your material of choice, tear off a piece large enough to cover the cap. Mold it over the opening of the tank, and make sure that the fit is perfect. Make sure that you have enough material to cover the whole opening area, and the surrounding, because this is going to be the temporary seal.

Secure the cover with some rubber bands, or some rope, as you should do it tightly, so no gar would spill around. These will prevent the aluminum cover from coming off and spilling gasoline all over your floor and grass.

Once you have covered your mower’s gasoline tank with a temporary solution, you can now buy the correct one as soon as you can. While the options are stop-gap measures, nothing beats using the one manufactured specifically for your mower, such as the Craftsman lawn mower gas cap.

Conclusion

The solutions we have covered are easy, convenient, and readily available. Before we wrap things up, here are a few reminders about using temporary gasoline caps:

Remind yourself that all the mentioned solutions are temporary and not meant to be used as permanent replacements.
Buy the correct replacement cap of the gas for your lawn mower as soon as possible.
Use the mower cautiously to avoid spilling gasoline from the gas tank, even when tightly secured.
Don’t mow your lawn with a full tank, since the temporary fuel cap can still come off.
Use temporary gasoline caps only when you need to use the mower immediately.

All of these temporary solutions can make your mowing experience easier, even if you lose the covering for the gas. Even with all our ideas, remember that nothing is better than the original mower part. Have you tried using our expert solutions?

Sources:

http://blog.hondalawnparts.com/fuel-system-tips-for-a-Honda-hrr216pka-mower/
https://obsessedlawn.com/how-much-gas-does-a-lawn-mower-use/
https://www.ferrismowers.com/na/en_us/product-catalog/zero-turn-mowers/isx-800-zero-turn-mower.html
https://www.evergreenseeds.com/temporary-lawn-mower-gas-cap/