STIHL benzocylet what oil pour. Review of models

The ratio of gasoline and oil for a trimmer for STIHL grass

Most lawnmands work on gasoline. There are diesel ones, but we will not talk about them as part of the article. Oil products of the following brands are sold at gas stations:

N-80 brand has been discontinued, rarely found. The octane number (number after letters) indicates the stability of the fuel for detonation. The higher the value. the greater resistance to self.disconnection during compression. AI-92 gasoline is more prone to detonation than AI-95. In the production of engines for lawn mowers, the manufacturer takes into account the resources of parts and the maximum permissible detonation. The instructions for the tool indicate which gasoline should be used.

Compliance with recommendations increases the service life of the lawn mower. If you fill in gasoline with a smaller octane number than indicated in the passport. the piston group will quickly fail. The use of fuel with a higher value is also destructive for the engine. There are no opportunities to increase the octane number by improving the process of oil distillation. Therefore, oil refinery add chemical additives to fuel. Distribution of detonation increases, the duration of combustion is growing with it. The result is soot on candles, rings, cylinders.

How to dilute oil for two.stroke trimmers engines

We learn the rule to choose oil for the lawn mower of various brands

Home equipment with gasoline engines asks for a responsible approach to maintenance. In order for the tool to have a long time to have a long.term work, you need to use fuel and oil mushrooms according to the annotation for technical operation. Two.stroke gasoline engines operate with the addition of oil in a combustible mixture, four.strokes have a separate tank in the fuel tank.

Varieties of motor oils, their purpose

Motor oil represents a special composition representing a solvent and additives that reduce friction that create suitable fluidity and prevent thickening when temperature decreases.

• minerals acquired during oil distillation;
• synthetic. synthesis or processing of natural gas;
• semi.synthetic. improved mineral oil due to the input of the synthetic component.

For safety reasons, so as not to confuse products, the oil is painted in reddish, blue or green color. The assortment varies in composition, the user must purchase oil with marking: “for garden technology” 2t, if you need to prepare a mixture for a two.stroke engine, 4t for filling in a crankcase.

Synthetic and mineral oils have a different base, they cannot be connected. When switching to another type of oil, the system must be painfully washed.

Oil for the lawn mower should be treated by systematizing the vehicle oils created for air cooling engines with a combustion chamber of 50-200 cm 3 when choosing a product with a fundamental parameter is not the cost, but protective characteristics for the motor of a certain brand. Therefore, first they purchase the recommended oil, in the absence they select similar in terms of indicators.

Determines the quality of the oil for the lawn mower alkaline number. Alkali neutralizes the process of oxidation of rubbing materials, slows down the destruction of the surface. When the oil becomes oxidized, it loses the protective characteristics. Ordinary pH of oil 8-9 units.

The fundamental indicator is viscosity. Therefore, there is winter, summer and all.season oil. What oil moutine oil does it depend, whether the user will work at minus temperature. Summer oils thicken even with insignificant cooling. The flash temperature indicates how the oil will burn out rapidly from the composition. Fuel features for two.stroke engines and oil classification. Practical tips on how to dilute gasoline with oil for a trimmer for grass. Normal if this indicator is more than 225 s.

Use and oil value in a two.stroke engine

The work of the motor is associated with the friction of the moving parts of the cylinder and sleeve, cams, hinges. During the friction of the parts, the surface is heated, with the expansion. clogging. If in the gap between the conjugated parts there is a composition in a suitable proportion of oil and gasoline for the lawn mower, a number of troubles are removed:

• Details in the engine work with low friction, are less warming;
• The lubrication in the gaps prevents the corrosion of parts during prolonged storage, lenses particles purchased during friction;
• The life of the motor is lengthened.

TOP-5 best oils for gasoline trimmer for grass

The semi.synthetic oil of all.season use has deservedly received good buyers’ responses. It is designed for two.stroke engines of gasoline trimmers, lawn mowers and other equipment. In this case, the lubricant not only serves to protect each element from friction, but also prevents the formation of deposits, which helps to avoid frequent breakdowns. Additionally protects against corrosion and oxidation of combustion products, vapors, dust, improves the temperature balance of the unit, demonstrating high heat capacity.

If the technique is equipped with a 2-stroke engine, which is cooled by air, you can fill this lubricant along with fuel into a common tank. Due to the high lubricants, good detergents, a low level of evaporation and versatility, the oil provides long and reliable operation, for a long time preserving the initial factory qualities of equipment.

STIHL for a two.stroke HP engine, 1 liter

The most popular brand. Choice of the buyer Country: Germany Medium rating (2022): 4.eight

Mineral motor oil, designed for the requirements of gasoline instruments of domestic and imported production, is characterized by good lubricating properties and the optimal ratio of additives. Consumers praised the wide possibilities of this lubricant. It can be poured into trimmers for grass, lawn mowers, chainsaws with two.stroke engines. At the same time, there is a good surface tension of the oil film, the rapid launch of the motor, a decrease in vibration and noise during operation.

STIHL HP oil is also released with sufficient viscosity-it reliably covers all the elements of the 2-stroke engine and does not flow into the pallet if the temperatures are approaching extremely high, but does not freeze if they are lowered below zero. Lubrication effectively neutralizes the negative impact of low.quality fuel, extends the replacement period, which makes the use of garden technology as a whole more economical and reliable.

Comparison with other brands

Today, many companies produce gasoline trimmers for grass. Given the cost of such a technique, the choice of specific models should be approached with maximum attention. Almost all developers of specialized tools and small construction equipment are engaged in the release of gasoline. We are talking about both industry leaders and little.known companies.

In the first positions of current ratings of popularity, the following brands are located:

Naturally, it is impossible to unequivocally answer the question of which brand and model is better. This is due to the presence of a whole list of selection criteria. However, when buying motorcycles in order to identify the competitive advantages of a particular brand, the operational indicators of representatives of different model ranks should be compared.

Most often, STIHL products are compared with Echo, Husqvarna and Makita brand trimmers. Initially, it should be noted that these technology samples belong to the same class and have largely identical technical characteristics, with the exception of some nuances.

This, first of all, concerns the designs of trimmers equipped with handles of the so.called bicycle type. All braids for grass can be equipped with two types of cutting elements: fishing line and disks.

Each STIHL lawn mower is equipped with a fast starting system. Among other things, these devices, like models of the mentioned brands, have a belt equipment that effectively reduces the load on the user’s hands. In accordance with the reviews of the owners, the most advantages of trimmers of the eminent brand Makita. We are talking about an increased speed of rotation of cutting elements that provide appropriate operational qualities.

Chips on the choice

In accordance with the current statistics, it is the gasoline models of mowers that are most in demand. This is largely due to their mobility and functionality. However, when choosing a specific model of technology, it is necessary to take into account a number of other parameters. In such situations, it will be useful to compare motorcycles with other types of trimmers.

Electric devices are connected to a household network with a voltage of 220 V. Such machines do not pollute the air due to the lack of exhaust gases. No less important points will be the minimum noise level and relatively small weight. At the same time, the processed area is significantly limited.

The battery models today are the least common trimmers for grass for grass. The electric engine of such mowers does not feed from the network, but from the battery, which provides maximum mobility. However, the operating time of the equipment is limited by the battery charge and is an average of 35-45 minutes. Another important point is the relatively high cost of battery models.

When choosing a specific model of a gasoline trimmer for grass, it is necessary to take into account its technical characteristics. So, low.power devices are equipped with coils with a fishing line. On more reserved and powerful models, knives and cutters can be used as cutting elements.

Another important factor is the operational conditions. Do not forget about the cost of mowers.

What is fraught with the use of incorrect fuel mixture

Many users of gasoline instruments are quite irresponsible to the manufacture of fuel consistency. For example, I met the owners of pollen, who diluted gasoline “by eye”. They just poured as much as they wanted, and later came up to me with a faulty equipment.

It is fundamentally aware that more than less does not mean better. This golden middle matters.

If you are preparing a mixture with a lack of oil, then everything is clear. There will not be enough oil for the cylinder and bearings, which means that friction and temperature will increase, scuffs will be created in the cylinder and can be jammed with crankshaft bearings.

What will happen if you pour it? A large volume of oil during burning forms many residual combustion goods that settled on the piston, in the exhaust opening of the cylinder and muffler, making the movement of exhaust gases. As a result. Power fall or complete loss of ability.

Carbon deposits that are formed from excessive oil of oil can settle under compression rings, preventing them from filling the thermal expansion, which will lead to seizure, in general the consequences can be quite severe.

Choosing a brand of gasoline for trimmers

You need to select a brand of gasoline for motorcycles taking into account the recommendations of the manufacturer. If you do not follow them, then the motor will soon break. Often for refueling a gas tank of a trimmer for grass, unhealthy fuel with an octane number of 92 or 95 is used.

Trammering a trimmer for grass with gasoline AI-80 can lead to breakdowns of the device due to its low technical characteristics. Keep in mind that after the purchase you can store fuel no more than 60 days, and it is better to reduce this period.

Polyethylene canists are not used for storage, t. to. In contact with the internal walls, static electricity will occur. The accidental appearance of a spark will lead to an explosion. Although, there are special canists of plastic with the marking “Flame”.

Briefly about the main thing

Motor oil for the lawn mower is designed for protective lubrication of the piston group of the engine, ensuring its working characteristics and durability. In this case, it should be well mixed with fuel, provide sufficient wear resistance to the interacting elements of the motor and have a viscosity and fluidity appropriate to operating conditions.

First of all, oils differ in type of motor-for 2-stroke and 4-stroke. The former are mixed to the fuel, the latter are poured into a special tank. In addition, they also differ in a number of other signs:

• Type of basics. synthetic, mineral, semi.synthetic.
• Type of additives.
• Engine volume.
• The level of harmfulness of the exhaust.
• Season of operation.

In order to correctly determine which oil is poured into a lawn mower, when choosing, it is necessary to take into account its characteristics as an alkaline number, viscosity, ignition temperature. The oil refueling in a trimmer for grass should be carried out strictly in accordance with the rules of application, if necessary, competent dilution.

Correct ratios and cooking for popular manufacturers

Different manufacturers recommend different proportions for their chainsaws

Their observance is followed with attention. The lack of lubrication leads to the failure of the internal combustion engine

An excess. to the loss of power, smoke, the formation of soot with all the above problems.

How to dilute for StiHL, in particular for the MS 180 model

The manufacturer recommends for motors of its chainsaws, including the STIHL 180 ms HP Ultra oil in a proportion of 1:50. It provides the highest capacity, service life and cleanliness of the ICE. It is also recommended to use motor oils in cans with the inscription STIHL

It is important to purchase original, but not counterfeit products here

In the case of a mix of oil and gasoline, not so. The mixture can be stored up to 2 years. After long storage, the container must be shaken to mix the possible precipitate.

Motomix is ​​a ready.made fuel mixture from Stihl, very comfortable when there is no time or the opportunity to mix liquids in place

How to dilute for a Husqvarna saw

The manufacturer in the operating instructions recommends using special oil for Husqvarna. It is adapted to the engines of this manufacturer, provides a long service life and quality work. Poured in a ratio of 1:50.

It is allowed to use oils for two.stroke air.cooled ICE from other manufacturers. If a proportion is not indicated on the canister, the manufacturer of the chainsaw of Husqvarna recommends pouring an increased dose in the proportion of 1:33.

Thus, for 1 liter of gasoline for the chainsaw, Husqvarna is flooded:

• 20 ml (in the colloquiality of grams) Husqvarna oil (1:50).
• 20 ml of other acceptable oil, if 1:50 is indicated on the canister.
• 30 ml per 1 liter of gasoline, 1:33, if another proportion is not indicated.

Husqvarna does not recommend storing the cooked mixture longer than 30 days. Before pouring a defended mixture, it is necessary to shake.

The ratio of oil and gasoline for Partner chainsaws, in particular Partner 350

For its saws, including model 350, Partner recommends using Talon branded oil in 1:40, that is, 1 part for 40 parts of gasoline.

In order to calculate the need for 1 liter (1000 ml), 1000 should be divided into 40. Result. 25 ml per 1 liter (1000 ml) of gasoline.

In the instructions of this manufacturer there is no information about the permissible replacement of the recommended Talon oil with others. In practice, oils for two.stroke engines with air cooling and other brands are used. In this case, the proportions are recommended already by oil manufacturers and are indicated on the canister.

Pay attention to the canister, the inscription 1:40, this once again confirms that each oil has its own recommended mixing proportions with gasoline

How to breed gasoline with oil huter

The manufacturer Huter does not release any one brand for his chainsaws for his chainsaw. There are recommendations for a general type. JASO FC classification oil or others: API TV, API TS, JASO FB for two.stroke ICE of air cooling.

In the operating instructions, Huter himself does not call proportions, but indicates that the mixture is compiled in the proportion indicated by the manufacturer of the oil.

For example, if the canister indicates 1:50. 20 ml per 1 liter of gasoline is poured. If indicated 1:40. 25 ml per 1 liter.

How much oil per liter of gasoline is poured into champion chainsaws

For its chainsaws, Champion recommends using Champion oil for two.stroke high.speed air.cooled ICE. Proportion 1:50, that is, for 1 liter of gasoline 20 ml.

In addition to the CHAMPION proprietary, the use of oils for the same engines of other brands is allowed. over, it must comply with the standards of the API TV/C or JASO FC/D, which should be indicated on the label of the canister.

How many grams of oil per 1 liter of gasoline are needed for makita saws

Makita, recommends for its gasoline saws, Makita oil for high.performance two.stroke engines

Makita pays attention to environmental protection. Oils of this brand have a minimum of polluting exhaust

Recommended proportions 1:50, 1 liter is poured 20 ml. It is allowed to replace with analogues of other brands, provided that they meet the international standard TS-3. At the same time, it is recommended to add more oil in the instructions, 1:40, for 1 liter 25 ml.

Which octane number to use. 92, 95 or 98?

Here the most interesting begins. Is it possible to refuel a chainsaw 95 with gasoline? In all settings for the operation of chainsaws, manufacturers indicate with fat font: “Do not use gasoline with an octane number above 92 for the preparation of the fuel mixture”. It is understandable, but apparently not everyone, t.to. Once from timely, a chainsaw with a burnt cylinder bring to service centers!

Let’s figure out which gasoline is to pour in the chainsaw and which! For all two.stroke engines, you need to use 92 gasoline, it is the tool that is designed for it. Pouring 95 gasoline, detonation (impetus of the piston into the anti-income) will begin to occur in the engine, something like a micro-impact that will occur almost at each turnover of the crankshaft. I think everything is clear about 98 gasoline, the effect will be even stronger, and it will already be mini strikes.

How to lubricate the gearbox of a trimmer for grass

Almost every motorcosa gearbox is equipped with a small technological hole, which in the mode of operation is drowned out by a special bolt. After thoroughly cleaning the node from the remains of grass and debris, it is necessary to unscrew the screw and enter the gearbox into the cavity of 1.5 to 3 ml of lubrication depending on the brand of the tool. For the convenience of dosage, you can use a traditional medical syringe. During the operation, it is impossible to allow foreign particles and objects inside the gearbox, since this can lead to intensive wear of the gear gear, as well as its jamming.

Currently, a wide selection of plastic lubricants, which are designed to reduce friction and overheating of the rubbing parts are presented on the market for gas.tools and consumables. Therefore, every owner, when maintaining the time of maintenance, is faced with a problem than to lubricate a trimmer gearbox for grass for long.term work. For these purposes, special plastic pastes are used, which vary in properties and manufacturer.

Lubrication for famous brands of trimmers

Each brand for the manufacture of gasoline trimmers always recommends a lubricant for the gearbox of the lawn mower of its own production.

• Husqvarna. This Swedish manufacturer recommends using a plastic lubricant of the Multi-Purpose Grease Grasa Universal. This material is available in tubes of blue-black color with a volume of 225 or 250 grams. According to the company, this lubrication of the gearbox trimmer for the grass was designed specifically for the Husqvarna technique, taking into account the steels and speeds used.
• Stihl. For the STIHL gas station FS, the manufacturer advises using the transmission lubricant of the Stihl Superlub FS, offered in tubes 225 grams or a one-time container of 80 grams of silver-orange.
• Patriot. The gearboxes of the motorcycle of this brand are recommended to be served by the original Arsenal lubricant AR-417. It is specially designed for gearbox gearboxes operating at high rotation frequencies and temperatures.
• Huter. For conical transmission of the tool models of this company Huter, you can use any of the above grades of transmission lubricants, as well as universal types of Rezoil, Cialitia and others.
• Champion. In the operating manual, Champion Motokosovs include Champion Super-Lube EP-O. The material is supplied in a jar of 250 grams or in a disposable oil Premium Champion C1104.
• Makita. This Japanese manufacturer advises its consumers to use the proprietary grease of Makita, which comes in white tubes with a red cover of 65 ml and 80 ml.

Factors for the choice of lubrication of the gearbox Motokosa

Often, the owner of a particular brand of gasoline trimmer for grass does not have the opportunity to purchase a lubricant recommended by the manufacturer for any reason. In such cases, a search will be required, which in its properties will be identical to a proprietary paste. Therefore, when choosing a paste for the gearbox gearbox, attention should be paid to the following factors:

• The viscosity of the lubricant. All pastes presented on the market are divided into three main groups, namely: high.speed (contain additives), solid lubricants (softened during the operation of the unit) and universal plastic compounds.
• The intensity of lubrication consumption. This factor is taken into account based on the personal experience of the owner, and is characterized by a period between two lubrications. Most manufacturers regulate the service of the gearbox every 20-40 hours of work.
• The degree of adhesion to the details of the gearbox. This indicator is characterized by a clutch of plastic lubrication to the metal knot of the trimmer for grass.

Lubricant for a trimmer gearbox for grass: which one to choose?

Currently, a wide selection of plastic lubricants, which are designed to reduce friction and overheating of the rubbing parts are presented on the market for gas.tools and consumables. Therefore, every owner, when maintaining the time of maintenance, is faced with a problem than to lubricate a trimmer gearbox for grass for long.term work. For these purposes, special plastic pastes are used, which vary in properties and manufacturer.

Lubrication for famous brands of trimmers

Each brand for the manufacture of gasoline trimmers always recommends a lubricant for the reducer of the lawn mower of its own production.

• Husqvarna. This Swedish manufacturer recommends using a plastic lubricant of the Multi-Purpose Grease Grasa Universal. This material is available in tubes of blue-black color with a volume of 225 or 250 grams. According to the company, this lubrication of the gearbox trimmer for the grass was designed specifically for the Husqvarna technique, taking into account the steels and speeds used.
• Stihl. For the STIHL gas station FS, the manufacturer advises using the transmission lubricant of the Stihl Superlub FS, offered in tubes 225 grams or a one-time container of 80 grams of silver-orange.
• Patriot. The gearboxes of the motorcycle of this brand are recommended to be served by the original Arsenal lubricant AR-417. It is specially designed for gearbox gearboxes operating at high rotation frequencies and temperatures.
• Huter. For conical transmission of the tool models of this company Huter, you can use any of the above grades of transmission lubricants, as well as universal types of Rezoil, Cialitia and others.
• Champion. In the operating manual, Champion Motokosovs include Champion Super-Lube EP-O. The material is supplied in a jar of 250 grams or in a disposable oil Premium Champion C1104.
• Makita. This Japanese manufacturer advises its consumers to use the proprietary grease of Makita, which comes in white tubes with a red cover of 65 ml and 80 ml.

Factors for the choice of lubrication of the gearbox Motokosa

Often, the owner of a particular brand of gasoline trimmer for grass does not have the opportunity to purchase a lubricant recommended by the manufacturer for any reason. In such cases, a search will be required, which in its properties will be identical to a proprietary paste. Therefore, when choosing a paste for the gearbox gearbox, attention should be paid to the following factors:

• The viscosity of the lubricant. All pastes presented on the market are divided into three main groups, namely: high.speed (contain additives), solid lubricants (softened during the operation of the unit) and universal plastic compounds.
• The intensity of lubrication consumption. This factor is taken into account based on the personal experience of the owner, and is characterized by a period between two lubrications. Most manufacturers regulate the service of the gearbox every 20-40 hours of work.
• The degree of adhesion to the details of the gearbox. This indicator is characterized by a clutch of plastic lubrication to the metal knot of the trimmer for grass.

What will happen if the manufacturer’s recommendations do not take into account?

In case of violation of the rules for the preparation of fuel and lubricants and non-compliance with proportions when adding oil to gasoline at the Stihl 180 chainsaw; the following problems arise:

• With an increase in friction, the wear of the working surfaces of parts will increase.
• Due to the insufficient amount of the lubricant, the bearings will begin to collapse.
• The full functioning of the mechanical nodes is violated in connection with the premature wear of the parts, their service life is significantly reduced.
• When using low.grade varieties of gasoline and oils, the performance of the unit decreases with subsequent breakdown of important nodes and parts.

Fuel is prepared before refueling the saw, avoiding excessive contacts with oxygen. After the end of work, the remaining mixture must be drained.

Storage periods of the finished fuel mixture

Motorists know that it is not worth stocking gasoline for a long time, and the finished fuel mixture spoils even faster. Mix the necessary proportions of oil and gasoline for the stihl chainsaw before starting work. Manufacturers allow storage of finished fuel up to one month, and experts recommend this period to reduce to 10 days. Immediately after mixing, the solution begins to lose its initial properties and over time it becomes not at all the same quality as it was prepared. Learn to cook so much fuel for a saw so that it can be spent at a time. This comes with experience. It is necessary to store the mixture in a gas.resistant opaque tightly closed container. For this, any canister of metal plastic for combustible materials will be suitable. And also use a container of oil or glass container made of dark glass.

In addition to the motor, for which all the proportions of oil and gasoline for the Stihl chainsaw have already been found out, there is another important detail consisting of many moving links. a chain. For its lubrication, not motor is used, but chain oil. It has completely different properties and is cheaper.

For a new tool, only oil manufacturers are used, which are recommended in the instructions. Otherwise, if a saw breakdown occurs, it will be removed from warranty service due to non-compliance with operating conditions. It should be noted that the oil from the manufacturer is really high quality. After the end of the warranty period, you can use any engine oil, making its replacement twice a year.

Requirements for the combustible mixture for a two.stroke engine

The difference between a two.stroke engine in its increased power compared to a four.stroke. The combustible mixture for it is prepared in a certain ratio of gasoline and special oil. What is the ratio of oil and gasoline for the lawn mower optimal, it is written in the instructions. Recommended proportions must be observed accurately. When adding additives, the manufacturer took into account the type of engine. Therefore, it is prohibited to mix various oils.

Using mineral oils, mixing occurs in a proportion of 1:25, 1:30, 1:35. For synthetic oils, a proportion is used 1:50 or 1:80. This means that in each of the proposed mixtures the right amount of oil is dissolved in the volume of gasoline. You can mix gasoline with oil mowing oil like water with syrup. It is necessary to pour gasoline, add the exact amount of oil and shake the mixture. It is advisable to use a fresh solution for work. When storing more than 2 weeks, the composition changes, and the oil film will cause malfunctioning of the carburetor.

For breeding and storing the combustible mixture, you cannot use PET bottles. Gasoline destroys plastic, polymer dissolves in a combustible mixture and further worsens the quality of fuel, a danger of the appearance of stray currents is created.

The correct selection of oil for benzos

Two.stroke engines are filled with a mixture of unhealthy gasoline and oil with 2t markings. In this case, you need to use the recommended gasoline AI-92. If you apply a brand with a higher octane number, the temperature of the flash and combustion will be higher, the valves will burn out prematurely. The same applies to the clock. The recommended composition is not the most expensive. But the use of another brand is unacceptable. Viscosity will change, this will lead to insufficient lubrication of ordinary products made without grinding high accuracy.

If the oil is added with excess, incomplete combustion will lead to the formation of a soil and an excessive exhaust into the atmosphere. A rich mixture is harmful to the engine. For a four.stroke engine, the oil is poured separately from gasoline. It washes nodes, cools, reduces friction. In the process, the oil is polluted and after 50 working hours should be replaced. What kind of oil is poured into a lawn mower, indicated in the passport. The composition should have a 4t mark with a viscosity of 10w40.

The best oil for any engine is the recommended. However, Shel Helix Ultra oil is world famous. The company has been developing a new technology for obtaining synthetic oil from natural gas for 40 years. PurePlus technology made it possible to obtain an improved composition of basic oil. On its basis, with the addition of the necessary additives, leading manufacturers receive recommended oils for their equipment.

The choice of oil primarily depends on the recommendation of the manufacturer. So, only branded oil is used for STIHL. The same oil is suitable for the brand of a knight, as the engines in the brand brands. There is an opinion of experts, oil of any manufacturer, designed for one type of equipment, is suitable for use on all brands. But if possible, it is better to use the recommended.

The supply of oil must be had for the need for one season. The product that has been standing for a long time loses its properties. On sale there are packages from 0.1 to 5 liters.

The path of oil recommended for the Husqvarna lawn mower was investigated. The company has no its own production, only the spill. The product purchased wholesale is spilled into small containers, marked and enters the retail network. Perhaps the composition of the oil at the manufacturing stage added exclusive additives for Khuskvarna.

The use of oil, according to the instructions for motorcycles, is mandatory. On clean gasoline, the equipment cannot work.