Cord -dressing in the Champion trimmer. The shape of the handle

How to install a fishing line for a trimmer for grass gasoline Champion

There are many types of heads that are designed for different types of fishing line. The latter is also available in several diameters: from 1.0 mm to 3.2 mm. At the same time, its section is round (including with a special groove to reduce noise), square, twisted and in the shape of a star.

There are no clear preferences, and this explains the wide variety of forms and diameters in the market. The round shape is usually stronger, but has a worst cutting ability, in addition, when rotation, it makes a characteristic sound. Therefore, sometimes they make an acoustic groove, however, the use of this fishing line makes sense only on battery trimmers, in machines with gasoline and network drive, the sound level of the drive itself practically drowses the sound from the fishing line. The square has a good cutting ability, and despite the fact that such a fishing line for a trimmer is less durable than round, on average it is consumed less. A square fishing line for a trimmer quite easily cuts the shoots of the same Ivnyak up to 1 cm in diameter. The star has the maximum number of cutting faces, mows best and is the fastest consumed.

The next nuance when choosing is stiffness. The fact is that in the production of nylon, a modifier (often maleine anhydride) is added to it, which improves its strength and prevents gaps. However, modifiers are not the cheapest component, they are trying to save on it. Therefore, it seems to be a good fishing line for a trimmer that remained for the winter, in the spring suddenly behaves completely differently. it breaks, stops doing normally from the reel. There is a recommendation to soak a fishing line for a trimmer in the water before work, but I do not see much sense in this, malein anhydride interacts with water, but if it is not enough in the nylon, then there will be nothing to interact. Therefore, it makes no sense to stock up on fishing line for a long period of time, a breakdown or constantly torn fishing line for a trimmer, which also does not want to leave the reel itself, can significantly complicate the work.

Trimmer for grass is the most all.fought unit used to cut grass and cutting small shrubs. This device is distinguished by its own simplicity in maintenance, easy management at one time, and due to low weight with the child, even ladies are controlled. Everyone understands that the high.quality performance of the weed mowing works require a correct selection of a cutting tool. As the latter in trimmers, special cutting nozzles (wheels, knives) are used in another trimmer heads with a fishing line. Nozzles and a fishing line for a trimmer are a consumable tool, if there is an option to sharpen the knives, then when spending the fishing line you need to change. Here we will very carefully tell how to correctly replace the fishing line for the trimmer.

A mowing head for grass is a cylindrical case where a coil (bobbin) is inserted with a fishing line filled here (cord). This design can be installed both on a gasoline and electronic trimmer. The heads differ in the method of refueling and supplying the cord and there are 3 types.

• Automatic. The cord is supplied if the user lowers the engine speed. Although the automatic supply of fishing line is and comfortable if huge volumes of work are carried out, such rods have one flaw. a large thread consumption.
• Automatic. The introduction of this type of heads does not ask for the user of complicated manipulations. The principle of their operation is arranged so that the cord is lengthened by automatic as an office, when the device operates at full speed. It is enough to hit the trimmer with the head of the ground on the ground (this removes the cord lock), and the fishing line for the trimmer, due to the centrifugal force, is extended from the bobbin, after which it is cut to the appropriate length with a knife placed on a protective casing.
• Manual. For lengthening the cord, the device is required, after which the fishing line for the trimmer is extended manually.

For reasons of the above, automatic bobbins are the best option. It should also be taken into account that the coils for a trimmer for grass are one.built (used only to trim the grass) and two.string, which are used to mow the highest grass and small, with thin shrubs of shrubs.

Ahead of time before starting the process of changing the cord, the users of trimmers must be removed and disassembled by the coil. Let’s see how to do it.

The mowing head of a trimmer for the grass consists of several parts: a casing, springs (not in any models), bobbins with a cord and cover.

Attention! Before proceeding with any action to maintain an electronic unit, it must be disconnected from the network.

In trimmers in most cases, 3 is used.5 options for mounting a mowing head.

To remove the head of the trimmer for the grass, it will need to have a complete disassembly.

In this version, the head is twisted onto the gear shaft. To remove it, you need to fix this common rumor of the shaft. For this purpose, you in similar trimmers, for example, in the Huter and Champion devices, is foreseen for a hole through which you can stick either a narrow screwdriver or an iron rug.

What will be needed to remove the bobbin, do 3.5 ordinary steps.

• Shine the screwdriver in the hole and stall the shaft.
• Take the head of the head and start twist it clockwise. It should be twisted in this direction due to the circumstances that the thread cut on the shaft is left.

Fishing and gasoline consumption at the wheel trimmer for Champion LMH5640 grass

What is the term of the project, which model of the trimmer for grass is used, the type, thickness and length of the fishing line is selected. Cord.up dialect and possibly from 1.2.7 to 4 mm. It is easy to think of that the thicker you will refuel the cord, the more hard and thick grass it is able to cut.

Almost always use a universal fishing line for a trimmer with a diameter 4.5 mm.

To find out which line of fishing line is used on your mower, there are 3 methods.

What is needed to replace the cord

With regular use of a trimmer for grass for begging grass, the discs are blunting, but they can be sharpened and continued to operate. The fishing line for a trimmer in the coil has the ability to end, so there is a need for refueling a new one, for which you need to determine the type of head and prepare the cord of the required thickness and length.

So, the mowing head is a cylindrical body in which a bastard is placed with a fishing line. Such a part is present both on electrimmers and on gasoline braids of any brands, whether it be Bosch, Makita, Stihl or other brand. There are three types of heads depending on the method of refueling and feeding the fishing line.

• The principle of operation of the heads of the automatic group is that they independently serve a fishing line for a trimmer, when a mowing reduces the speed of the motor. Such designs are convenient when working in large areas, but they have a shortage. a large cord consumption.
• The heads of the semi.automatic group are easy to operate. automatic fishing is performed at maximum engine speeds. To remove the cord lock, you need to carefully tap on the ground with the tool, after which the unlocked thread extends from the coil. The cut to the required length is made with a knife fixed on the protective casing.
• Trammers for grass with manual supply of the cord must first be turned off, and then independently pull out the fishing line for the trimmer.

Read angular grinder 125 900 Interskol replacement button

On a note! The most convenient and optimal in price are semi.automatic coils with the cord.

Coils for electric and gasoline braids can be with one or two tastes of fishing line. The former are used to trim low herbal shoots, the latter. for beveling tall grass and small shrubs.

How to refuel a fishing line for a trimmer for Champion grass

Warranty production of the factory refueling of a trimmer for the grass will be in demand to change fishing line. Having a very indicative idea of ​​what is really, how to fill the fishing line for a trimmer to the coil of a trimmer for grass without the help of others, the brand new without hunting take up this matter. But with some abilities, the development of this simple science does not represent any difficulties, and the similar annotation presented below will greatly facilitate this common hearing process.

First, for winding the fishing line, it is necessary to remove the coil (bobbin, spool) from the trimmer for the grass. certain acts will depend on the difficulty of configuration and the type of product itself:

• Small electronic trimmers for grass with a working location of the motor and coils in the bottom, you have side buttons on both sides of the bobbin. With the simultaneous press there, the highest part of the coil, coupled with the internal contents for winding the fishing line, is disconnected, although the lower one remains on the trimmer. The analysis of the bobbin is better to create in an even smooth place, so that the spring entering the design does not jump out of it;
• Electronic and gasoline trimmers for grass with a curved rod without the ability to install a knife, you have coils with a special lamb: in similar structures, you should hold a spool in a motionless position with one hand, and turn the fixing bobbin on the stalk a barack nut. After disconnecting the nut, the whole bobin is removed.
• Electronic and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, the screwdriver is inserted into this hole as it is also called another suitable object and, with unhurried rotation, such mutual placement is achieved when the screwdriver enters the openings, and the bobbin is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

How to replace a fishing line for a trimmer champion t266

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.bona coils, the fishing line for a trimmer extends into the through hole, its ends (antennae) are folded together and aligned, then they are wound in the back of the rotation of the bobbin on the bar the side. the arrow of the arrow is exaggeratedly indicated the correct direction of the winding. In the presence of fixing grooves, the ends of the fishing lines are threaded there in other words, hold the fingers of the free hand, spread into the through hole of the outer half of the bobin, the spool is locked and attached to the bar of the trimmer product.

The difference in the winding of the fishing line in the two-drummer coils is that the line of the fishing line 2-5 m long is in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves. Both strains of the fishing line are wound up who on their own groove, fixing antennae and assembly of the coil is similar to the option considered above with one groove.

The 1st implementation of this process, you will seem long and quite labor-cost, but over time and experience, this problem will be solved significantly more frequent and easier.

The video below will clearly show how to tuck a fishing line for a trimmer to the coil of a trimmer for the grass and correctly wrap it. this operation is not any difficulties and, with some patience, will certainly be crowned with a furorur:

There is a type of coils where the automatic mechanism performs winding without the help of others. from the user it is quite true to season the fishing line for the trimmer. The fishing line for the trimmer is passed through the hole on the inside of the case, its antennae without winding are tied through the hole on the outer case, the bobbin is assembled, and when rotating the winding button for the trimmer, the snitches are wound without the help of others. It is unrealistic to make the winding erroneous in such a spool: the mechanism itself will determine the correct direction, since it can only spin in one direction.

Option

In this version, the head is twisted onto the gear shaft. To remove it, you need to fix this shaft. To do this, in such trimmers, for example, in the Huter and Champion devices, a hole is provided through which you can insert either a thin screwdriver or a metal rod.

So, to remove the bobbin, take 2 simple steps.

• Insert the screwdriver into the hole and stall the shaft.
• Take the head of the head and start twist it clockwise. It should be twisted in this direction for the reason that the thread cut on the shaft is left.

We carry out the winding of the fishing line

Sentlessly completed disassembly of a spray coil without losing its spare parts allows you to go to the main task-winding into a fishing line coil. Technological features of the design of the spool and the number of working antennae determine the sequence of actions.

Coil with one working osik

The easiest option and a simple sequence of actions:

• The dimensions of the bobbin and the length of the original factory winding determine the length of the fishing line recommended for winding. 2 5 m.
• One end of the fishing line is inserted into the fixing technological hole located inside the spool.
• The fishing line for the trimmer is wound on the drum in reverse rotation of the spray in the trimmer product direction. as a rule, on the inside of the bobin, the arrow indicates which direction the winding is carried out.
• A small section of the fishing line is left free to output it. it is fixed in a specialized border on the inside of the bobbin, designed to keep the winding when assembling a spool in working condition.
• The left end of the fishing line is passed through the hole of the outer part of the bobbin.
• Half of the bobbin are collected and put on the bar of the trimmer device.

Two working antennae

In this type of spools, the number of grooves for winding the fishing line lying on the inside of the coil should be determined:

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.captable coils, the fishing line for a trimmer stretches into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the back of the rotation of the bobbin on the bar the side. inside the arrow is usually indicated the correct direction of the winding. In the presence of fixing grooves, the ends of the fishing line are threaded in them or hold their free arm fingers, spread into the through hole of the outer half of the bobin, the spool is closed and attached to the bar of the trimmer product.

The difference between the winding of the fishing line in the two-to-dancing coils is that initially a line of fishing line 2-5 m long is folded in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves. Both strains of the fishing line are wound each in its own groove, fixing the antennae and assembly of the coil is similar to the option considered above with one groove.

The first implementation of this procedure may seem long and quite time.consuming, but over time and experience, this task will be solved much faster and easier.

The video below will clearly show how to refuel a fishing line for a trimmer to the coil of a trimmer for the grass and correct it correctly. this operation is not a complicated one and, with some patience, will necessarily be crowned with success:

After the cutting thread as a result of the work is worn out, turn off the braid and remove the lid on the mowing head. Pull out from the slot of the forest, stretching it to the desired length, and insert it again in the slot. The amount of material wound on the coil is enough for 5-10 cycles of work depending on the model of the device. When you install the lid in place, carefully look at whether the grooves were clogged where the latches are inserted, if they are clogged, then carefully clean them.

When the fishing line for the trimmer is worn out, you need to disassemble the braid head again, pull out the coil and wind up the work fishing line for the trimmer again.

Trimmer for grass is the most common unit used to cut grass and cut small shrubs. This device is distinguished by its simplicity in maintenance, simple management during operation, and even women cope with it even a small weight. It is no secret that for the high.quality performance of herbal mowing work, the correct selection of a cutting tool is required. As the latter in trimmers, special cutting nozzles (wheels, knives) or trimmer heads with fishing line inside are used. Nozzles and a fishing line for a trimmer are a consumable tool, but if the knives can be sharpened, then when spending the fishing line you need to replace it. In this article, we will tell you in the most detail how to correctly replace the fishing line for the trimmer.

How to remove the head of the champion grass

One of the common devices designed for haircuts of grass is a trimmer for grass. It is very easy to work and maintained. That is why it became popular among the population. Its significant advantage is small weight. Even a child can cope with such equipment.

Specifications

The main technical characteristics of the trimmer for grass are:

• power;
• Equipment weight;
• type of power (from the network or using the battery);
• engine location (above or below);
• type of cutting element;
• Type of bar.

All this needs to be taken into account, buy a particular device.

How to choose the right?

Before buying this equipment, you need to understand for what purposes it will be used. For a large section with a flat lawn, it is better to purchase a light model with slight power. If you need to improve the summer cottage, then you need to choose the model more powerful.

Electric version of braids for grass

Self.propelled type of these units can be used anywhere, but only next to the power supply. Silent, they are often used near schools, kindergartens, as well as hospitals and clinics. They are quite actively used in private territory.

The models are easy to manage, have a low noise level, high reliability, as well as an acceptable price.

FSA 85

Length is 165 cm. Current 8 a. Ideal for mowing in a small territory.

A convenient device in order to mow the lawn, flowerbed, fence, etc. D. The engine works quietly enough, no exhaust gases.

The fishing line for the trimmer does not extend automatically

If, with a light blow, the trimmer coil button for grass on the ground is not lengthened for a trimmer, then the reasons for this may be the following.

Option 1. there was a snack, t.e. Squeezing the cord between turns. This problem usually appears if the user wound a fishing line for a trimmer to the coil unevenly, with the intersection of the turns, or wound it with insufficient tension. In the latter case, when the mowing head is rotated at large revolutions under the influence of centrifugal force, the cord begins to drag on, as a result of which the interitral clamping of the fishing line is possible. To eliminate the problem, you will have to disassemble the coil on the trimmer and rewind the cord correctly, that is, with even turns with good tension.

Option 2. too short ends protrude from the head. A fishing line for a trimmer may not exit when hitting the ground, if its ends sticking out of the head, insufficient length (short). In this case, the centrifugal force is not enough for the fishing line for the trimmer to stretch. Therefore, it is required to stop the unit (drown out the engine or turn off the ethletric trimmer for grass from the network) and pull the fishing line for the trimmer manually, after pressing the button.

Option 3. a fishing line for a trimmer was soldered inside a mowing head. This leads to the fact that the coil is stopped and does not spin when the button is pressed. Basically, this happens for several reasons: poor quality of the cord, overheating of the coil with prolonged operation of the unit, a fishing line on solid items.

• In the first case, the cord of third.party manufacturers can be made of low.quality and fusible materials that do not withstand the mechanical and temperature load. Therefore, preference should be given to “branded” fishing.
• But, if you still purchased a fishing line for a trimmer of unknown quality, and it is often soldered during operation, then you can follow the example of some users who, after refueling the cord, moisten it either with silicone grease (from the spray can) or mineral oil). This procedure greatly reduces the likelihood of soldering a fishing line among themselves.
• Also, a fishing line for a trimmer can sleep if during a mowing it hit a hard object (stone, fence, dry branch, etc.D.). As a result of this, it is slightly stretched and draws back into the head with high speed. The cord is heated from friction, and its turns are sticking together. The only thing that can be done to eliminate this malfunction is to open a trimmer coil for grass and rewind a fishing line for a trimmer.

FSE 31

Light and cheap unit. Ideal for processing a small territory. It is better for them to collect, mow grass after a lawn mower.

Battery lawn mower

The ideal option for someone who does not want to breathe gasoline exhausts, and also depend on electricity. The unit consists of a durable polymer case and a compact grass collector. The volume of the grass collector depends on the model.

Such devices are silent, reliable and safe to use and.

FSE 60

Mowing grass up to 36 cm. Speed ​​up to 7400 rpmers per minute. Power is 540 watts. The case is plastic. Telescopic pen. Inexpensive, but practical tool.

Method 2. how to dress a fishing line for a trimmer to a coil of motorcycles with a photo description and video

The second method differs from the first in that not a whole piece of equipment is charged into the coil, but segments of two parts. Manufacturers use this way, and it is also suitable for those who have the remains of the material. The principle of how to insert two segments of the fishing line into the tip of the motorcycles, the same with the first way, and to make sure of this, below is a detailed instruction:

• There are two equal lengths of the segment of the material that you can use
• One segment is taken, and the edge is bend in the form of a clamping bracket or hook, with which the fishing line will be fixed
• Inside the coil, there are holes in the form of a bracket for fixation, which are there for a reason. If they are not, then the second option will not work. The appearance of these brackets is shown in the photo below. Each bracket is on its own
• The line of fishing line should catch on the bracket, and make it wound in compliance with the direction of the arrow
• The equipment is wound until the segment of 10-15 cm remains, which is fixed in the corresponding hole on the side of the tip
• The same manipulations with the second end of the fishing line are carried out
• The protrusions are starting into the holes of the head, and then, extracting the equipment from temporary fasteners in the coil, a cover with clamps is installed

The above instructions on how to install a fishing line for a trimmer in a motorcycle will help not only correctly, but also quickly perform a replacement procedure. The assembly of the coil of the trimmer for the grass, as mentioned above, can be performed without removing the head, but in this case you will need to conveniently fix the tool. Video Instruction is presented below.

Trimmer head with two antennae

After extracting the spray from the coil body, we determine the number of streams for winding fishing line (1 or 2). There is no fundamental difference between bobbins with one and two grooves, but with a careless refueling in a paired groove, there are problems with operation. Due to the likelihood of weaving neighboring tools, a situation may arise when after the wear of the working antennae it is impossible to extract new.

Regardless of the number of streams for refueling, a fishing line is taken for a trimmer from 1 length.5 to 3 meters. The winding must be carried out in reverse rotation of the head to the side, since the winding in the direction of movement will lead to the fact that the fishing line for the trimmer will not be removed from the bobbin. After the fishing line for the trimmer is tucked into the coil of the trimmer for the grass, free ends (15-30 cm) we stretch into special holes. Next, collect the head in the reverse disassembly order and check the performance. Do not worry if the ends of the two antennae are very different in size, since when the trimmer for the grass is launched, the knife installed on protection will cut off the excess.

Champion T221 Trimmer. model characteristics

This Champion braid has an excellent balance, low fuel consumption and low vibration level. Small dimensions, a curved rod and the low weight of the tool allow the use of this trimmer for grass for work in hard.to.reach places.

The manufacturer equipped this champion braid with a volume of twenty.two cubic meters. The motor is located on several springs that absorb the vibration of the crankshaft of the engine. For the convenience of use, the manufacturer provided an ergonomic removable M-shaped handle in the tooling of tools.

Technical characteristics of this chamber trimmer include:

• The power of the standard motor. 0.68 l. From.;
• Tank capacity for refueling. Three hundred and fifty ml;
• The maximum possible bevel width when using fishing line. Thirty eight cm.

To effectively protect the operator from flying grass and stones, the manufacturer equipped this model with a curved plastic casing.

What is a trimmer for grass?

The basis of this equipment is the following elements:

• engine, the main function of which is the rotation of the cutting head at the end of the bar;
• directly the head, consisting of a coil, on which either a fishing line for a trimmer or a knife can be wound;
• The knives rotating at high speed or a fishing line for a trimmer, which are the main cutting part of the device, about how to charge a fishing line for a trimmer to a trimmer for grass, will go a little further.

The electric device is inferior to gasoline in its power, so it is ideal for working on a standard plot of land, which adjoins the house with source of electric energy. The main positive aspects of such technology are the lack of noise during operation, light weight, ease of operation and, of course, environmental friendliness.

As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any site. Electricity here is not at all necessary to use, which positively affects the functionality of such an apparatus. cutting nozzles can be changed by working with a variety of weeds that are different in type.

One of the most common nozzles is a fishing line for a trimmer, so you should dwell in more detail on this element.

Champion ET1200A grass trimmer. model description

This electric braid for grass in standard configuration is equipped with a straight separation bar and a motor with multi.level protection against overheating and voltage surgery. For ease of use, the manufacturer equipped this model with a comfortable handle, the height of which can be adjusted.

• Standard motor power. One thousand two hundred W;
• Necessary network voltage. Two hundred twenty c;
• The maximum possible bevel width when using fishing line. Forty.three cm;
• Cut width when using a knife. Twenty.three cm.

Trimmer for grass can be used both in closed greenhouses and flower beds located near the windows of residential premises.

Which line for a trimmer to choose

Before you stock up on this material for refueling in a trimmer for grass, you need to decide on the choice. After all, the usual so.called round fishing line for a trimmer is far from the only existing look. How to choose the most suitable? First you need to determine the working conditions.

Type choice. a line for a trimmer with a round section is the most common. It will suit any reels with the rarest exceptions. This type of consumable is suitable in order to mow fresh, juicy grass. But with the mowing of the so.called dryness, this kind may not cope anymore. It is pointless to mention attempts to mow shrubs and mention.

In addition to the usual type, there are others with sharp faces. Usually they are made by a “star” or “square”. The presence of sharp faces is the main feature and key difference between these threads.

It is thanks to this feature, the threads of such species are able to mow dry weeds. But the spicy threads are not devoid of disadvantages, the main of which can be called rapid wear and strength, markedly inferior to the round type.

In addition to the already mentioned types of forests, there are still interesting and often encountered varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. Threads of this type are often used in tools working on gasoline and having an engine more powerful than one and a half horsepower.

Threads with a metal core are both with a round section and with sharp faces. Regardless of the type of cross section, such threads are the best suited to overcome hard.to.stop plants. Threads related to this type easily mow not only dry grass, but even small shrubs.

The threads with wire inside are favorably different from other types of consumables for their incredible wear resistance. But unfortunately, this feature has a more than noticeable effect on the price of this type. The cost of threads with a core significantly exceeds the cost of threads of other types.

Choice in thickness

In addition, special attention should be paid to the thickness of the consumption material. For mowing young grass, a thread is suitable with a diameter of one and a half millimeters. The larger the diameter of the thread, the more dry and rude weeds it can overpower

The larger the diameter of the thread, the more dry and rude weeds it can overpower.

When choosing a fishing line in thickness, there is one “but”

It is important not only to evaluate the capabilities of the material, but also to take into account the features of the trimmer for the grass. You must definitely look into the user’s management, which is attached to the tool, and find information about the requirements for the cutting element. The use of inappropriate thread can lead to the failure of the tool

The use of too thick thread will entail the overload of the device engine. And the use of too thin thread will significantly increase the wear of the torque

The use of inappropriate thread can lead to the failure of the tool. The use of too thick thread will entail the overload of the device engine. And the use of too thin thread will significantly increase the wear of the torque.

That is why it is necessary to approach the choice of consumables no less responsibly than to refuel in a trimmer for grass. When a suitable fishing line for a trimmer is found and purchased, you can begin to consider the ways to wind it on the coil.

Package

Seeing a trimmer for grass in the store, you will be very surprised by its packaging. With such dimensions, the device itself, its packaging is very compact. The size is 960 x 250 x 100 mm (dxshxv). It is made of dense cardboard and colorfully decorated.

On the front side of the box, an electric hood is depicted and the designation of its model. Protection against unauthorized opening of the box is provided by the label with the designation of the article and model. familiar to everyone who at least once bought Bosch power tools. If the label is not torn, then you can be sure that the box has a complete set. In the lower part, as is already adopted by many manufacturers, inscriptions with the main advantages of the model are visible: simplicity, power, ergonomics, convenience.

The decryption of these advantages can be found on the back of the box.

The main technical parameters of the device and the consumables used are described on the left side of the box. When studying this information, one strangeness was noticed: it is written on the box that this is an electric bush, although on the manufacturer’s official website this device is positioned as an electric cos, which is more like the truth.

The appearance of the box of my copy was a little battered, but this did not affect its contents.

How to wind a fishing line for a trimmer to a trimmer to grass?

The second method is a little more complicated in independent execution.

You need to wrap the cord for a trimmer for grass in the following order:

• First you need to cut off the total amount of approximately 6 m of the cord, and bend it. In this case, one of the parts should be slightly larger than the second;
• Then the thread of the place where it was bent will need to be inserted into a recess located on the dividing line between the two sections of the spool. As a result, the first part of the segment should be in the upper, and the second. in the lower section of the spool;
• After that, you need to start wrapping the fishing line. You need to do this in the direction of the arrow indicated on the corn. During winding, the cord should not be interpreted. The upper part of the segment should be neatly wound on the upper, and the lower. on the lower section of the spray. After that, two 15-centimeter segments of the cord should remain free;
• Further, the remaining ends will need to be inserted into the recesses located in the upper part of the spool;
• Then the fixed ends must be stuck into the through holes of the braid head of the trimmer for grass.

At the end, you will need to connect all parts of the mowing head, and pull each end of the fishing line a little. The finished coil will need to be installed on a trimmer for the grass and continue to work on the site.

How to change a fishing line for a trimmer in a trimmer for grass

How to change the marshmallows of which is better to choose

Since the choice of a trimmer for the grass we saw in the previous article, now we will tell how to correctly refuel a trimmer for the grass with a fishing line, and which is better to choose based on the criterion of work.

After you purchased a trimmer for the grass and began to use it intensively, at some point the question will arise about the substitution of the fishing line, since this is the most weary element in the tool, the rich operation of the trimmer for the grass will often lead to replacement of consumables.

You will need it

Bobbins of the trimmers, the motor of which is located near the ground, have a different fastening to the rotation axis, they have two buttons on the coil located on the sides that need to be squeezed, the rest of the thread is no different from the other cassettes.

The principle of proper winding of the fishing line is similar in all of the listed services, so for example, consider the standard option with two antennae.

To remove the coil with a fishing line, you must unscrew the screw in the center, but keep in mind, the thread there is left, so you will have to twist clockwise, it is specially so that it does not open under the influence of centrifugal force during operation.

Next, using the screwdriver, disassemble the head and remove the coil, on which the fishing line for the trimmer is directly wound. I had to take a trimmer for the grass. It is enough to process grass in the garden and how it is. Having measured the required length and folding it in half, you need to refuel the coil, withdrawing, as a result, its ends opposite each other (for this there are special slots for fixation).

After that, it is necessary to assemble the head in the reverse order, passing the ends of the cord in two corresponding holes.

If there are doubts or it is not entirely clear how to charge a trimmer for the grass, we recommend that we see how to correct the fishing line for a trimmer into a lawn mower. How to rent a coil C is the only right solution for mowing grass in a fishing line for a trimmer in. In this video, the instructor will open a trimmer head in detail by steps, it will measure the required amount of fishing line, as a rule, this is from two to four meters, and demonstrate the assembly and installation for a trimmer for the grass.

How to replace a fishing line for a trimmer in a trimmer

The winding direction is indicated on the coil with an arrow.Then we spread the mustache through the holes in the top cover. We dress it on the base and snap it. All. It is worth trying once and next time you will do everything with almost closed eyes.

Put a bobbin on a trimmer for the grass and proceed to mow.If the edges of the fishing line are bred too long, you can bite them off with nippers to the desired length.

Instructions with a step.by.step description how to wind the coil of a trimmer for grass and lawn mower

In order not to make a mistake with the choice of a suitable fishing line for your tool, you should first disassemble the head and look at the side wall of the coil. This information is usually presented on a tip, which will not allow us to make a mistake using the appropriate equipment.

If the information on the coil about what diameter the fishing line for the trimmer can be refueled, then this information can be clarified in the instructions. Having decided on the thickness or diameter of the equipment, it remains to figure out how to charge it. There are two ways for this, but not for all they are applicable. Consider both methods in details, and already depending on what models and trimmers you use, you are determined on your own which option is suitable.

It is interesting!The principle of how to wind a fishing line for a trimmer for a tip of motorcycles is appropriate not only for autonomous benzar groups, but also for electric trimmers.

Fishing line refueling in a trimmer for grass

Before filling the fishing line for the trimmer to the coil of the trimmer for the grass, measure 5 m from a skein (so many fishing line is installed on average on trimmers). Then fold it exactly in half in order to find the middle. The purchased center must be stuck in a special slot, which is placed on the coil. Then wind the fishing line in the direction of the arrow, which is on the head.

From what was written above it follows that the process of substitution of fishing line is not composed. Having carried out such a manipulation as winding the fishing line on the coil of a trimmer for grass, a couple of times, you will bring this process to automatism. The only thing you need to look at the condition of the fishing line all the time to avoid its break at the time of work on the site, when a spare skein under the hand may not be.

Now you understand how to tuck a fishing line for a trimmer to the coil of a trimmer for grass, and you can do this without the help of others without special effort!

Which line for a trimmer for a trimmer for grass is better?

To answer this common question, you must alternately consider the main working parameters of the cutting cord.

• thickness. the larger the diameter of the fishing line, the higher its effectiveness when working with thick weeds;
• section. cords with a twisted and round section proven themselves best. Another popular option is “Star”. Cords with a cross section of this type successfully cope with high thick grass and young shrubs;
• manufacturer. cutting cakes of brands Husqvarna and STIHL are highlighted by high quality, strength and durability. Their only minus is a high price. In such cases, you can choose inexpensive cords of brands Sturm, Forte or Intertool.

When choosing a fishing line, it is desirable that the gardener has the opportunity to check the cord with your own hands

It is important to stretch the cutting cord and try to break it. If the fishing line for a trimmer does not lend itself, then it can withstand a fairly high load

trimmer for grass gasoline

Small mobile devices for cutting grass and young branches consisting of a bar, a motor, cutting part and a handle are called a trimmer.

The device of the bezinotrimmer is simple, it is easy to disassemble, if necessary

There are electrical and gasoline modifications. The former is not refueling fuel, but they depend on the length of the cord. The second work regardless of the availability of electricity, anywhere in the garden or garden.

Gasoline trimmers for grass are easier and cheaper than lawn mowers. They cope with grass and shrubs, so such mowers are used in everyday life and on an industrial scale. For convenience, the technique provides belts that are worn on the shoulder. Thus, the load on the hands and back decreases.

The final moment of the instruction

Typically, the process of replacing fishing line on a trimmer of a particular model is popularly described by accompanying documentation. Another question is that this documentation is often supplied in a foreign language, since the notorious lawn mowers for the most part are imported products.

Meanwhile, there is a much simpler, more economical and healthy way for human health and nature. putting the lawns of an ordinary peasant oblique in order. Blory of braids for grass:

which is subsequently accompanied by abundantly growing greens, and not by the formation of dryness as a result of the work of a trimmer for grass.

Winding profiles (cones)

Different models of coils of the coils of fishing line on the rogue are applied in different ways. High.quality products use a cylindrical and conical winding method. The laid fishing line for a trimmer to profile forms a flat fishing line for a trimmer. With a cylindrical winding, this fishing line for a trimmer is straight, parallel to the spool, with conical. inclined.

The straight conical shape narrows to the front side of the spool, the opposite. expands. Straight cone reduces the friction of the fishing line. The reverse styling type reduces the likelihood of spontaneous fishing line.

There is a third type of winding. chaotic. Usually used in cheap Chinese fishing rods. And if such a winding can still be tolerated using a regular fishing line for a trimmer, then you should refuse to use in such a coil of the cord. Bad castings, “beard”, overlaps and confusion are provided. This leads to failures during fishing, and can also ruin the mood for every fisherman.