Rotor Rotor Mower for the Motoblock Review of the best models and prices
About the mower “Dawn” infa was already here: www.Drive2.ru/b/1443450/and here: www.Drive2.ru/b/461985375129177218/Today we will talk about improvement. For last year, during the mocking of the Buryan, inconvenience arose. When spent, a lot of weeds fell on top, and then the mountain lay, which interfered with quick mowing. I had to lower the frame with the rotors a little down, about seven degrees. They digested the frame on which the motor itself stood.
And now there are almost no problems with bulk.
Work of mowers for motor blocks
A detailed description of the work of each haymaking is easier to see with specific examples.
Mower to the motor.cultivator “Neva”
Rotor mower for the walk-behind motorist “Ugra”, NMB-1
Segment mower for cultivators “Oka”, “Neva”, “Cascade”
All hayfields are equipped with detailed instructions, as a rule, users have no problems when assembling, installing and operating. These technical devices are quite simple, so they are in constant demand. One of the arguments is an affordable price.
Pros and cons
The main advantage of such devices is the manufacture of equipment with the necessary characteristics or functions at minimal costs.
The disadvantages include the fact that the manufacture of a good mower will be required:
- high level of locksmith skills, turner and welder;
- special equipment, at least, welding inverter, drill, corner grinder and current machine;
- cheap, and preferably even free, components, for which you will have to attend points of receiving scrap metal, landfill and storage of written.off equipment.
Varieties and features of mowers for a mini.vector
Processing of the personal plot has always taken a lot of effort and time. Therefore, after many farmers and owners of personal plots began to actively use such a universal equipment as a mini.tractor in their farm, then the need for hinged equipment for such an unit increased several times. Today we will talk about the mower, what are they and what are their features.
If there are all the necessary materials and equipment, as well as a sufficient level of knowledge in the relevant fields of work with metal, then you can independently make a mower of any type. If there is no list given in the previous section, then the possibility of manufacturing such devices is greatly reduced.
The lack of skills or equipment can be compensated by the appeal to a specialist, for example, to entrust the implementation of one or another work to a professional welder, however, this greatly increases the cost of finished products.
If it is impossible to get materials, for example, cutting segments, then this dramatically reduces the possibilities of independent manufacture of mowers, because not all components can be done efficiently with your own hands.
Popular models
The modern market of agricultural equipment represents a large number of mowers of both eminent brands and little.known samples. Despite the fact that the vast majority of them are of high quality and have many positive reviews, some of them should be highlighted separately.
- The Zarya-1 model is produced at the Kaluga Engine enterprise and has a rotary type of execution. The productivity of the device is 0.2 hectares per hour, which is a pretty good result for disk devices. The capture width is 80 cm, and the weight does not exceed 28 kg. The model is compatible with Neva, Oka, Cascade and Tselina, and a special modification is available for “salute”. Installation is also possible on the motoblocks “Agro”, “Belarus” and “MB-90”, but in this case, an additional bracket or gearbox is required. The model is equipped with a height regulator and is characterized by high cut quality. In addition, unlike segment models, mowed grass fits in neat rolls that do not need to rob.
- “KNM-0.8” is a finger segmental model compatible with motoblocks such as “Neva”, “Salute” and “Cascade”. The capture width is 80 cm, the weight is 35 kg, the device is a typical representative of segment models and corresponds to all the characteristics described above inherent in this type.
- The Chinese model “KM-0.5” also refers to the segmented type and is compatible with motoblocks such as Hitachi S169, Favorite, Neva and Salute. The device is characterized by small dimensions and is able to cut off grass at a height of 0.5 cm, that is, almost under the root. However, the width of the capture of this model is somewhat inferior to similar indicators of previous mowers and is only 50 cm. The weight of the device corresponds to 35 kg, and
How to install on a single tractor?
Installation of a mowing on a one.based tractor is as follows:
- At the end, the protective shield is installed on a single.axle tractor and adjust the belt tension; To do this, they turn the handle in the direction of movement of the unit;
- After that, the engine is launched and tested is carried out.
Installation
One of the main underwater stones in the manufacture of a mowing mower is not even that as a result of stubborn works the mechanism may not earn, but in the potential danger of the unit made with obvious errors.
The injury hazard of such designs is often quite high due to incorrectly selected materials or unreliable welding work, therefore, in many cases, it is more advisable to purchase finished equipment or at least order welding to a professional in his field.
If you nevertheless lit up with the idea of independent manufacture of a lawn mower for a walk-behind tractor, pay attention to the fact that even a correctly assembled device will not work if it is incorrectly attached to the walk-behind tractor. To avoid common mistakes, we will give several obvious tips.
How to make a mower for a walk.behind tractor with your own hands. manufacturing options
Almost each of the listed types of mowers for the motor block available on the household is quite easy to make on your own. The only thing is that the problems can arise during the assembly of frontal equipment, since it is quite bulky, and requires the acquisition of many articulated mechanisms.
The greatest popularity among farmers-enthusiasts is rotary and segment devices for motoblocks. They have a simple design, and for their manufacture it is not necessary to have specialized equipment in stock.
Rotary mower. how to do it with your own hands?
This type of common attachment equipment will be as effective as possible on any site. If low grass sprouted on it, then the device will simply grind it, and if the weeds are quite high, then the mower will download them.
For the manufacture of a rotary mower, you must definitely study drawings. They should indicate the dimensions of each part details and methods of their fastening.
The further procedure for assembly is as follows:
- First you need to find 2 disks. they can be taken from the grain seeder or any other equipment available in the farm. Also, a gearbox and a chain from a chainsaw will be required to work;
- To make the axis on which the knives will be mounted, you should use a pipe made of carbon steel, with a diameter along the entire length of about 1 cm. In order for the knives to rotate freely, the axis is tightened by the disk to the stop;
- The previously manufactured disks will need to be fixed on the welded frame and connect it to the drive provided in the design of the powerage power shaft. Make sure that when rotating, the disks will rotate towards each other. in this way they will put the mowed grass in neat rows.
A homemade rotary mower made in this way will quickly get rid of weeds and bushes of any height and thickness. The collected equipment does not need frequent repair and special maintenance.
How to make a mower for a walk.behind tractor with your own hands. manufacturing options
Almost each of the listed types of mowers for the motor block available on the household is quite easy to make on your own. The only thing is that the problems can arise during the assembly of frontal equipment, since it is quite bulky, and requires the acquisition of many articulated mechanisms.
The greatest popularity among farmers-enthusiasts is rotary and segment devices for motoblocks. They have a simple design, and for their manufacture it is not necessary to have specialized equipment in stock.
Rotary mower. how to do it with your own hands?
This type of common attachment equipment will be as effective as possible on any site. If low grass sprouted on it, then the device will simply grind it, and if the weeds are quite high, then the mower will download them.
For the manufacture of a rotary mower, you must definitely study drawings. They should indicate the dimensions of each part details and methods of their fastening.
The further procedure for assembly is as follows:
- First you need to find 2 disks. they can be taken from the grain seeder or any other equipment available in the farm. Also, a gearbox and a chain from a chainsaw will be required to work;
- To make the axis on which the knives will be mounted, you should use a pipe made of carbon steel, with a diameter along the entire length of about 1 cm. In order for the knives to rotate freely, the axis is tightened by the disk to the stop;
- The previously manufactured disks will need to be fixed on the welded frame and connect it to the drive provided in the design of the powerage power shaft. Make sure that when rotating, the disks will rotate towards each other. in this way they will put the mowed grass in neat rows.
A homemade rotary mower made in this way will quickly get rid of weeds and bushes of any height and thickness. The collected equipment does not need frequent repair and special maintenance.
TOP of the best rotary mowers for a walk.behind tractor. analysis of and manufacturers, proper installation
The Neva Unoa tractor is equipped with a rotary mower
Motobobes without additional hinged and trailer equipment are useless. Moot blocks are no less popular than plows. Rotor and segmented models of travo.shirts for walk.behind engines will like farmers with fields and just owners of a small farm. About what features a rotary mower for a walk.behind tractor has to talk in more detail.
Features of the rotary model
Rotary mowers have a simple design, which facilitates their maintenance and repair. The working bodies are discs on which knives are mounted. They are fixed on the disks using movable hinges. Discs can be from one to several. The more working disks, the wider the area of the processed surface will be.
The price of spare parts and components is low. For our models of rotary braids, spare parts can be bought at any specialized store. Imported models are not older than 10 years no worse. Mowers over 10 years of imported production may not have spare parts, since some models no longer release.
The owner of the rotary mower will easily ennoble the lawn in front of the house and stocks the grass for the winter for livestock. A small model for a walk.behind tract during cleaning areas around fruit trees and beds is convenient.
They produce rotary mowers with us, as well as abroad. Among the largest and most popular models, mowers for the Neva, Dawn, Mole, Favorite stands out. Models differ in the number of working bodies and adjusting the height of the cut of grass. To clean the grass for feeding animals, you can use models up to 20 cm high, haymaking with a cut height of 5 cm showed themselves well on the house territory.
Aggregate with the Motoboblome Favorite, Mole, Neva Rotor mower in several ways:
Reviews are better about hinged models for the Neva and Cascade, Mole, Favorite. Their power is higher and it is easier to work with a walk.behind tractor, since the entire processed area is visible.
According to the method of mowing grass, rotary mowers are divided into views:
- For begging grass and laying in an even row. Suitable for mowing grass on hay.
- Mulching the grass. Crushed grass quickly rolls, suitable for handling lawns.
Choosing a model for its Neva, Salute, Zorya, Favorite, Mole is recommended to take into account the following factors:
- Landscape features.
- The purpose of acquisition (for mowing grass on hay of livestock or for aligning the lawn in front of the house).
- The weight of the mower (it is important during transportation, since it is difficult to transport a large model).
- Productivity (for a small lawn, the most miniature mower is enough with slight power).
- Type of a bevel of grass (for harvesting hay for livestock feed, models that mulch grass are not suitable).
BCS walk-behind Tractor. Lawn mowing with flail mower
What is included in a home.made mower
For assembling lawnmands at home, it is recommended to use an electric motor. The power of the lifting element should be more than 1 kW. As for the number of revolutions, their number should be at least 1500 per minute.
The size of the capture on average should be at least 5 cm. A power unit in the form of a motor can be taken from any old household appliances. For example, a vacuum cleaner, a washing machine and a chainsaw. The main requirement is the performance of the part.
In addition, the lawn mower is equipped with the following set of elements:
- Electric cord providing power;
- Maneuverable handle that allows you to control the entire installation;
- Knife. It will be used as a cutting part;
- Several wheels for installation mobility.
Experts recommend purchasing a protective casing that helps protect the user at the time of operation of the device.
As a cutting part, it is recommended to use metal knives that can be made of tool steel.
Champion Walk behind Tractor Rotary tiller. Rotavator. Мотоблок BC9713 / BC9714
The width of such parts should be at least 5 cm, and their thickness is 3 mm. The photo contains an option to create a saw disk. As for the shape of the knife, it can be absolutely any.
The device of the mowing handle
You can use a metal profile as a handle for a home.made mowing, the length and width of which should be calculated taking into account the growth of the user.
In the process of moving the installation, a person should not bend and experience any discomfort. For the mobility of the installation, small wheels are used, which can be taken from furniture or baby stroller.
Do not use too large details that can disrupt the function of the lawn mower.
Homemade segment mower on a single tractor
Such a segment mower on a single tractor is made of metal beams 15x50x120. They need to drill 12 holes in them so that their dimensions are suitable for m8 bolts. In the future, the guide of the rail (89 cm) with teeth and knives will be attached to these bolts. Knives are installed on both sides of the beam.
Forms are attached from the two ends of the beam and presses. A wheel is attached to the main frame, which can be removed from an unnecessary stroller. Under the influence of VOM motoblock, the cutting part of the mower begins to work. This is evident in more detail in the figure:
The main welded frame (1), braces (2), the gearbox (3), fixation and adjustment of the braking system (4), a dog for fixing the brake (5), the main arcs (6 and 8), the hinge case (7), the leg, the leg (9), gas pipeline (10), a regulator crane (11), a tank for gasoline (12), a handle (13), levers (14 and 17), a snapping mechanism (15), fasteners (16), gas adjustment lever (16) 18), clamp (19), muffler for the engine (20), engine (21), fixing fasteners (22), fairing (23), cutting knives (24 and 25), cover (26), slide (27), element fixations (28), knife frame (29), traction (30), finger (31), plates for pressing the lower and upper parts (32 and 33).
The mower collected according to this drawing easily mowing the grass. In action, this home.made mower can be seen on the video.
How to connect a home.made mower to a walk.behind tractor
The mowal collected by hand will not bring the necessary result if it is incorrectly attached to the walk.behind tractor. There are certain rules that must be observed when installing a mower.
First of all, you need to convert the one.based tractor to the reverse mode. Before you attach to VOM, the adhesion placement is placed in the nest. Using a wrap with a spring, you need to lock the connection. The absence of a spring will lead to a malfunction of the trailer mechanism.
For greater safety, you need to close the braids with a protective casing with a protective casing. Motor block wheels contain goods that help in soil processing. Since they do not need to mow the grass, they should be removed. The mowing of the grass should start with the least speed. You do not need to rush and make them smoothly.
If you have collected a mower for a walk.behind tractor with your own hands, first of all its work should be safe.
When they connected a home.made mower to the walk.behind tractor and it works, quite large drives of discs with knives are achieved. In the case of a breakdown breakdown, it is possible to receive wounds by you or people around you. Therefore, first think about whether you have the ability to make such a device. After all, the purchase of a finished mower for a walk.behind tractor and the treatment of crippled organs or nerves will cost much cheaper.