Dilution of gasoline for a trimmer for grass proportions. Standard proportions

How to breed gasoline for a trimmer for grass

Depending on the variety of trimmers, they can be seasoned with a fuel mixture or separately gasoline and oil. Now there is a huge variety of types of motor oils that are suitable for different technology, including garden. To choose the right fuel for a certain model of motorcycles, you need to know its technical features and understand the brands of gasoline, as well as liquid lubricants. All the details on how to dilute gasoline with oil for a trimmer for grass is in the material further.

But such results are real if you know exactly how much oil is added to gasoline for a garden trimmer for grass. The fact is that two.stroke engines operate on a mixture of gasoline with butter. Fuel enters the cylinder, burns there, creating a working effort on the piston, and that part of the oil that did not have time to ignite, lubricates the moving parts of the piston group. When preparing a mixture for a trimmer for grass to a liter of gasoline, it is necessary to add a strictly defined amount of oil. If there is too little lubrication, then the friction force will become too large and the motor will jam, and in the case of too much, the oil will fill the candle and the engine will staller. Also, with excess oil, the engine power will decrease, it will not develop the required revolutions and smoke much.

When compiling a fuel mixture, it is necessary to calculate how much oil is needed per liter of gasoline, based not only from the standard proportion, but also from which brand of gasoline and oil is used. In the case of two.stroke engines, it is very important.

The finished mixture of gasoline with butter can be stored for no more than 3 months (clean gasoline is stored less). Dilute the fuel in the quantity that is enough for several applications of the trimmer for the grass. In general, prepare:

• gasoline and oil, which is suitable for two.stroke engines with an air cooling system;
• metal canister and a mixture container;
• respirator;
• gloves.

Adding oil to gasoline

• Pour 1 l of gasoline into a suitable volume of 1 l of gasoline and add 1/2 of the desired amount of oil.
• Mix carefully, being at a decent distance from the sources of open fire.
• Add the rest of the oil to combustible and mix everything again.

The process of refueling a trimmer for grass

General recommendations for refueling a trimmer for grass with a two-or four-stroke engine:

• Place the fuel tank so that the lid is located on top, and then pour the required amount of fuel.
• Do not overfill the fuel tank. This will lead to one of the problems: transferring into the intake pipe and fuel filter, flammable ignition or breakdown of the motor.
• Try to fill the mixture so that it does not spill. To do this, you can use the watering can.
• If you still poured fuel, then immediately wipe it. Put the wiping material, do not accumulate indoors. this is fire hazardous.
• The launch of the device should begin after the canister with fuel is removed at a distance of more than 10 m.
• If there was a long break between the operations of the mowing, then the remaining old fuel be sure to drain.

How to dilute gasoline with oil for a trimmer for grass

Dilute gasoline for a trimmer for grass in the correct proportion. Insufficient oil can lead to poor lubrication of the elements of the lawn mower, which contributes to rapid wear. In case the oil is more than the olive formed on the pistons and spark plugs. Foreths on the moving parts of the engine interferes with normal operation and leads to the speedy breakdown of the motor.

What proportion is required for a specific model of a trimmer for grass can be found from the attached instructions. Most often, for 2-stroke gasoline motors of motorcycles, the fuel mixture is used in a ratio of 50: 1, where 50 is part of the gasoline, 1-part of the oil. That is, 20 ml of oil should be added to 1 liter of gasoline. The table will help to choose the necessary ratio.

To correctly measure the proportions, use measured containers with a milliliter scale. For these purposes, a special canister with a double neck is perfect, it is designed to mix and storage of oilbenzin. For example, oil can be typed with a medical syringe without a needle. Before mixing liquids, make sure that there is no water, dust and particles of dirt in the container for the finished fuel mixture.

Diluting gasoline with lubricating fluid directly in the fuel tank is unacceptable, in addition, the proportion of oil and gasoline should be clearly observed. If you ignore this rule, then the operation of a trimmer engine for grass can be unstable, which is why it will quickly fail.

It is not recommended to use plastic bottles or canists for this purpose. This is due to the fact that gasoline has the ability to dissolve plastic, which means that part of the plastic can get into the fuel tank, which can lead to a carburetor breakdown. Although there are special plastic canists with the marking “Flame”.

• petrol;
• oil suitable for two.stroke engines with an air cooling system;
• canister, better metal;
• Mixing container is also better metal;
• gloves;
• respirator.

In addition to protective equipment, do not forget about fire safety rules, because gasoline and engine oil are easily ignited:

• It is better to work on the street to avoid accumulation of gasoline vapor in the room;
• you can not smoke and create situations related to the emergence of a spark.

Make a mixture of gasoline and oil as follows:

• Pour 1 liter of gasoline into the container, add half the desired portion of the oil. Mix thoroughly, do it extremely carefully away from the sources of open fire.
• Add the rest of the oil to gas for the grass and mix thoroughly again. Now fuel can be poured into the fuel tank of a trimmer for grass.

The mixture can be stored for no more than three months, so it is better to dilute gasoline in such quantities that there is enough use.

For dilution, only high.quality oil can be used, while it is recommended to purchase it only in trusted stores, for example in specialized hypermarkets.

What oil to choose for refueling in a trimmer for grass or types of lubricants

Trammers for grass and lawn mowers operate on two.stroke engines that have a simplified design. Rarely, but there are models of trimmers with 4-stroke engines that work on pure gasoline. Two.stroke.type power units do not have a compartment for pouring motor oil (oil crankcase), due to which the weight of the tool is reduced and their cost is reduced. If the rotating details of the motor are not lubricated, then in the end they will quickly fail. To prevent this, a trimmer for grass is seasoned not with clean gasoline, but a mixture with butter. What kind of oil to dilute with gasoline for a trimmer for grass?

First, remember or find out what types of oils are produced by chemical composition:

• Mineral fluids. designed for small power technology, which has air cooling. This is the cheapest type of lubricant for motors
• Semi.synthetic substances. they are used for technology, which has air and water cooling
• Synthetic. suitable for all types of motors with different types of cooling. They do not require frequent replacement, and this type of lubricant is several times more expensive than mineral and semi.synthetic

From the foregoing it follows that for a trimmer for grass, oil with any composition is suitable. mineral water, synthetics and semi.synthetics. Oils with different chemical composition differs in price, so it is necessary to rely when buying on the recommendations of the tool manufacturer. The instructions indicate recommendation information about which types of oils are best used. If this is the TS-W3 standard, then it is not so important which composition should have a substance. In this case, you can dilute mineral water, semi.synthetics and synthetics with gasoline.

It is interesting! The main thing when choosing oil is not to fall on the fake, since today you can very often find different types of lubricants for two.stroke engines, which consist mainly of low.quality oil products.

Features of the gas station

Depending on the engine device, motorcycles are divided into two.stroke and four.stroke. In the first case, the piston in the internal combustion engine makes 2 moves in one working cycle, and in the second case. 4 moves. Differences in principle of operation of the engine determine different approaches to refueling a trimmer for grass.

Two.stroke engine refueling

In ordinary household models, motorcycles are used, as a rule, a two.stroke engine. The lawn mower is not needed very much power and edification, so it is quite suitable for performing the tasks. In addition, this engine is much cheaper and simpler, but it is refueling with a fuel mixture, which consists of oil and gasoline. Such fuel is poured into a carburetor and is supplied to the cylinder in the form of oil-Benzine fog. Thus, the oil provides lubrication of all the necessary parts, and in the process of operating the engine burns together with gasoline. However, the combustion of this mixture is accompanied by the release of caustic odor and smoke, which increases the toxicity of exhaust gases.

Important! For such motos, you need to use a special oil for two.stroke engines, which completely burns without leaving a halt, and has low evaporation. And so that it mixes well with gasoline, it includes 20% solvent.

Motokos refueling with a four.stroke engine

Four.stroke engines are used in professional motorcycle models. They have high power and can work for a long time without a break and refueling. As fuel, they also use gasoline and oil, but they are poured into different tanks. So. the oil does not participate in the process of combustion, so the exhaust gases are not so toxic.

On a note! Along with the best environmental indicators and the ability to heat less, four.stroke engines are also more economical. They consume much less fuel. savings reach up to 50% in gasoline and up to 80% of the clock.

What gasoline to fill

Gasoline for a trimmer for grass must be selected unhealthy with an equal number of 92 or 95. As practice shows, AI-80 gasoline can lead to breakdowns of the device, which is a dubious savings.

The fuel should be fresh, that is, after buying it can be stored for no more than 60 days.

Other factors are affected by the quality of fuel, for example, the use of a special lubricant for the lawn mower and its breeding in a separate container. It is also recommended to use special canists designed to store gasoline.

How to dilute gasoline with oil for a trimmer for grass

Dilute gasoline for a trimmer for grass in the correct proportion. Insufficient oil can lead to poor lubrication of the elements of the lawn mower, which contributes to rapid wear. In case the oil is more than the olive formed on the pistons and spark plugs. Foreths on the moving parts of the engine interferes with normal operation and leads to the speedy breakdown of the motor.

What proportion is required for a specific model of a trimmer for grass can be found from the attached instructions. Most often, for 2-stroke gasoline motors of motorcycles, the fuel mixture is used in a ratio of 50: 1, where 50 is part of the gasoline, 1-part of the oil. That is, 20 ml of oil should be added to 1 liter of gasoline. The table will help to choose the necessary ratio.

To correctly measure the proportions, use measured containers with a milliliter scale. For these purposes, a special canister with a double neck is perfect, it is designed to mix and storage of oilbenzin. For example, oil can be typed with a medical syringe without a needle. Before mixing liquids, make sure that there is no water, dust and particles of dirt in the container for the finished fuel mixture.

Diluting gasoline with lubricating fluid directly in the fuel tank is unacceptable, in addition, the proportion of oil and gasoline should be clearly observed. If you ignore this rule, then the operation of a trimmer engine for grass can be unstable, which is why it will quickly fail.

It is not recommended to use plastic bottles or canists for this purpose. This is due to the fact that gasoline has the ability to dissolve plastic, which means that part of the plastic can get into the fuel tank, which can lead to a carburetor breakdown. Although there are special plastic canists with the marking “Flame”.

• petrol;
• oil suitable for two.stroke engines with an air cooling system;
• canister, better metal;
• Mixing container is also better metal;
• gloves;
• respirator.

In addition to protective equipment, do not forget about fire safety rules, because gasoline and engine oil are easily ignited:

• It is better to work on the street to avoid accumulation of gasoline vapor in the room;
• you can not smoke and create situations related to the emergence of a spark.

Make a mixture of gasoline and oil as follows:

• Pour 1 liter of gasoline into the container, add half the desired portion of the oil. Mix thoroughly, do it extremely carefully away from the sources of open fire.
• Add the rest of the oil to gas for the grass and mix thoroughly again. Now fuel can be poured into the fuel tank of a trimmer for grass.

The mixture can be stored for no more than three months, so it is better to dilute gasoline in such quantities that there is enough use.

For dilution, only high.quality oil can be used, while it is recommended to purchase it only in trusted stores, for example in specialized hypermarkets.

Fuel mixture preparation rules

For many newcomers who have bought a motorcycle, the question of diluting gasoline oil for the preparation of a gas stem is becoming a problem. After all, you need to know the proportions and adhere to them very scrupulously. The instructions for the product usually indicate in what ratio to dilute the components: 1:25 or 1:32, or 1:40, or 1:50. This means that for 1 part of the oil, you need to take 25, 32, 40 or 50 parts of gasoline and mix them.

In such categories, it is uncomfortable to measure in such categories, therefore it is better to determine by simple mathematical calculations how much oil is needed per liter of gasoline. For this, 1 liter should be divided, which is 1000 ml, into a certain proportion. It turns out the following mixing table.

Most often, in a proportion of 1:40, mineral oils should be diluted, and 1:50. synthetic brands. Whereas for budget Chinese motos, the proportions are completely different. 1:32 or 1:25. This is due to the fact that in low.power models produced in China, another assembly is used, and the distance between the piston and the cylinder is much larger.

Advice! To measure fuel, it is best to use a measured container with divisions. An ordinary syringe is suitable for this.

Further actions have such a sequence.

• First you need to pour gasoline into a container (canister), and then add the necessary volume of oil. If you first pour the oil, then thanks to a higher density it will settle on the walls of the container and does not stir poorly.
• The next step. the contents of the canister should be thoroughly mixed by means of circular movements of a closed container.
• After breeding until smooth, the combustible should be poured into the fuel tank of the lawn mower.

Important! Do not immediately use a gas tank to prepare a mixture.

You can watch more detailed and visual instructions on the video.

The consequences of refueling with a mixture with incorrect proportions

When diluting, combustible materials are very important to observe the ratio recommended by the manufacturer Motokos. If the oils are not enough, then bulletin forms on the piston and cylinder, which sooner or later is led to breakdown of the piston ring.

Important! In addition, as a result of friction, the metal from the piston settles on the walls of the cylinder, and the engine can simply jam. This will require repair or replacement of the motor.

And with an excessive amount of oil, the piston ring is shielding, as well as the formation of soot on the piston, on the spark plug, etc.D. All this leads to strong wear of equipment and the need for constant cleaning.

What will happen if you confuse the type and method of using oil?

If you pour a mixture for two.stroke in a four.stroke motor, the following will happen:

• power will fall;
• fuel consumption will increase;
• Candles will quickly fail;
• With long work, it is possible to burn the gasket, valves or the piston;
• smoke will become darker and smelly;
• Over time, the carburetor will clog, so the motor will work poorly even on proper gasoline.

If pour the oil instead of a crankcase into fuel, then in addition to the described troubles, it will soon fasten first, and then it will jam the crankshaft bearing, because it cannot work normally without lubrication. If pure pure gasoline into a two.stroke engine, then it will soon fail, because the crankshaft bearing will lose his lubricant.

If the fuel mixture for a two.stroke engine is mistakenly pour four.stroke oil, then:

• The crankshaft bearing will quickly fail;
• Over time, the work of the carburetor will be disturbed;
• quickly burn valves, piston or gasket.

The consequences of refueling with a mixture with incorrect proportions

When diluting, combustible materials are very important to observe the ratio recommended by the manufacturer Motokos. If the oils are not enough, then bulletin forms on the piston and cylinder, which sooner or later is led to breakdown of the piston ring.

Important! In addition, as a result of friction, the metal from the piston settles on the walls of the cylinder, and the engine can simply jam. This will require repair or replacement of the motor.

And with an excessive amount of oil, the piston ring is shielding, as well as the formation of soot on the piston, on the spark plug, etc.D. All this leads to strong wear of equipment and the need for constant cleaning.

Benzotrimmer loves cleanliness. It is necessary to monitor the purity of the air filter and fuel. It is better to defend gasoline bought at a gas station for 2 days and pass through the simplest filter. a piece of bike matter.

We check the electrical equipment as follows:

We unscrew the candle, examine the gap between the electrodes. We set the right gap between the electrodes can be a “grandfather” way. We take a blade from a razor, scraps in half and insert a home.made probe between the electrodes. If the blades enter tightly, then the gap is perfect.

We put on a candle cap of a high.voltage wire and lean the candle against the metal surface of the engine. Twist several times by the starter. If the spark beats well at one point, then the gap is adjusted correctly. If not, the spark is weak or “wanders”, then it is necessary to re.adjust the gap between the electrodes.

The finished mixture of gasoline with butter can be stored for no more than 3 months (clean gasoline is stored less). Dilute the fuel in the quantity that is enough for several applications of the trimmer for the grass. In general, prepare:

• gasoline and oil, which is suitable for two.stroke engines with an air cooling system;
• metal canister and a mixture container;
• respirator;
• gloves.

Adding oil to gasoline

• Pour 1 l of gasoline into a suitable volume of 1 l of gasoline and add 1/2 of the desired amount of oil.
• Mix carefully, being at a decent distance from the sources of open fire.
• Add the rest of the oil to combustible and mix everything again.

The process of refueling a trimmer for grass

General recommendations for refueling a trimmer for grass with a two-or four-stroke engine:

The rules for filling the mixture in different engines

The main rule is to strictly observe the mixture ratio for two.stroke engines and not use such compounds for four.stroke engines. In addition, observe the principle of “seasonality”. after a long stay of fuel in a gas tank, drain it and replace it with fresh.

It is practical to immediately prepare a certain amount of the mixture for the future, so that later it can be quickly used. When stored, adhere to the rules:

• Keep a gasoline composition for no more than 3 months, since it is divided;
• Use to store a container that does not pass sunlight. Keep it away from the direct rays of the sun;
• Do not place the container next to the heating devices.

Tools

Trimmer for grass gasoline Patriot RT 3355 is designed to trim and mow low grass on lawns, streets, around trees, along the roadsides, on lawns and garden areas. The unit is successfully used on even and relief, uneven areas. The manufacturer improved the model taking into account convenient transportation and easy use: the bar is made by a detachable, quickly assembled and disassembled. The comfort of operation adds a wide shoulder belt with an adjustable length. Fast launch is simplified by the primer.

• Description of the Patriot RT 3355 model
• Preparation and pouring of the fuel mixture in a trimmer for grass Patriot RT 3355
• Stages of starting a trimmer for grass of gasoline Patriot RT 3355

Description of the Patriot RT 3355 model

• Universal aggregate: The use of fishing line allows you to carry out work on cutting lawns and flower beds, a change to a cutting knife allows you to perform a cut of dry stake, weeds with a hard or elastic stem, a trinter trim.
• Comfortable management and operation. Using innovative protection against vibration in the design, the selection of the optimal balance of the tool.
• Handle and shoulder belt using ergonomic technology.
• The primer facilitates the start, removes the load from the starter.
• Maintenance is affordable and convenient. If necessary, quick repair and elimination of problems in the ignition and in the filtration compartment is carried out.
• Engine power 1.8 l.With. allows you to productively carry out continuous work within 4-4.5 o’clock.
• Engine volume 033 l.
• A sharp knife with a diameter of 230 mm. Knife rotation frequency of 8000 rpm.
• Strong reliable fishing line for a trimmer with a diameter of 2.4 mm.
• Capture width 460 mm.
• Cycling handle.
• Net 6.6 kg.
• Gross 8.6 kg.
• Dimensional dimensions 95 x 36 x 23 cm.

Preparation and pouring of the fuel mixture in a trimmer for grass Patriot RT 3355

• The mixture for a two.stroke engine is made only from original Patriot oils and high.octane gasoline AI 92.
• For preparation, use a special canister from the configuration of a trimmer for grass. Marking is adapted for gasoline and oil of a particular model 3355.
• Gasoline is poured to the mark for gasoline fluid.
• The corresponding brand of Patriot oil for a two.stroke engine is poured into it.
• With a few shakes, the mixture is brought into a homogeneous state.
• Preparation of the mixture in a conventional gasoline canister is performed with exposure to gasoline/oil 32: 1 proportions.
• The preparation of the fuel mixture directly in the tank of the trimmer for the grass is not recommended.
• It is recommended to prepare a portion of the mixture for one, maximum two gas stations.
• Pour the mixture with the engine turned off, away from the sources of open fire.

Stages of starting a trimmer for grass of gasoline Patriot RT 3355

• The freshly prepared mixture is poured into the tank.
• It is transferred up to the “cold” position, the air damper lever.
• The ignition on the control handle is set to the “inclusive” position.
• 5-7 clicks on the primer button to fill the carburetor with a mixture.
• A trimmer for grass is laid on a stable surface at a safe distance from objects and people. The contact of the trimmer head or cutting knife with the ground is avoided.
• The gas trigger is pressed on the control handle and is fixed in this position.
• With one hand holds a trimmer for the grass, and with the other hand stretches the starter handle until the “hook”. At this moment, the handle pulls sharply until the engine is launched.

The engine is launched with preliminary stretching of the cord. Make sharp jerks of an unreliable cord or pull the cord until the stop is not worth it due to the high probability of a starter breakdown.

• Install the lever of the air damper in the middle position.
• Starter handle must be pulled several times before the engine starts.
• Warm the engine 5-10 seconds. Transfer the lever of the air damper down. Press the gas trigger for unlock.
• Smoothly pressing the gas trigger, the engine is brought to maximum speed. They start working.
• Produce kosbu, holding the trimmer for the grass for ergonomic handles tightly.
• For a heated engine, the operations described above are performed without pressing the primer. In this case, the air damper is placed in the lower position.

The grass trimmer is equipped with a semi.automatic fishing line. When working at maximum speeds, hit not a very pressure head on the ground so that the length of the fishing line increases by 2.5 cm.

An important feature

Prepared a combustible mixture for a trimmer for grass, falls into the combustion chamber of the cylinder in the form of a whitish fog. Oil liquid integrated into gasoline lubricates the crankshaft, cylinder walls. Infoliasis of oil fluid in the fuel is fraught with premature wear of the parts and nodes of a trimmer for grass. Exceeding the norm leads to a breeder that settles on working details, which is also fraught with premature technical wear of motorcycles.

The gasoline mower will serve the owner for a long time, provided that in the fuel tank, they will not be any kind of gasoline, but high.quality prepared fuel.