DIY motor cultivator with lifan engine

Articles

Engine design features

The design of the Lifan brand power unit provides:

  • fixing the throttle control cables in different directions;
  • fuel and oil tank with anti-splash neck and filter mesh;
  • oil level sensor.

motor, cultivator, lifan, engine

Factory off-road vehicles with Lifan engine

In the basic configuration, factory snowmobiles with a Zhiguli gearbox and axle are available to a middle-income buyer, but the installation of attachments that are not included in the base price (winch, roll cage, tarpaulin awning, trunk, halogen lights) makes the price of a production car high.

How to make a DIY caterpillar all-terrain vehicle with a Lifan engine: photos, videos, drawings

Homemade compact equipment is great for off-road travel while fishing and hunting. It is not difficult to make a light tracked all-terrain vehicle with a Lifan engine in a home workshop with your own hands. The vehicle will greatly simplify movement on soggy roads or wetlands.

Advantages and disadvantages

The advantages of Lifan brand power units include:

  • quiet operation and low vibration regardless of engine speed;
  • increased service life;
  • reliable Japanese carburetor with which the motor is equipped;
  • easy start-up and stable operation in the minus temperature range;
  • fixation of the drive pulley by means of a key-bolted connection.

The lack of autorun can be noted as a disadvantage. In a self-made all-terrain vehicle on tracks with a Lifan engine, the power plant is located at the rear of the chassis, and for each start of the machine, the operator of the all-terrain vehicle must approach the engine to start the installation with a kickstarter.

Self-assembly of an all-terrain vehicle with a Lifan engine

Due to the high cost of factory models of all-terrain vehicles on tracks, self-made SUVs with a Lifan engine are made in a home workshop. For 150 thousand rubles. it is easy to design a three-wheeled off-road bike on low-pressure tires, a karakat or an all-wheel drive swamp-going vehicle fracture.

Materials and components that will be needed for assembly:

  • sheet metal;
  • rims and hubs of a passenger car;
  • shaped tube and angle steel of various sizes;
  • rear axle VAZ;
  • variable speed drive;
  • Lifan engine with a capacity of 11 or 15 hp.

Tools required for locksmith and assembly work:

  • electric arc welding machine and welding inverter;
  • metal cutting machine (angle grinder);
  • drilling machine and hand drill;
  • a set of socket and wrenches;
  • measuring and locksmith tools.

Design work begins with the manufacture of a boat frame in accordance with the drawings of the all-terrain vehicle, after which the Lifan engine and basic fracture nodes are placed on the frame and their best layout is selected.

  • Manufactured from sheet metal with a thickness of 1.5-2.0 mm of a welded boat frame (approximate dimensions for a car with a crew of two are 1.8 x 2.8 m).
  • Fastening the VAZ bridge 1: 4, through which the caterpillar will be set in motion.
  • The track star is made from a car rim and is attached to the drive axle hubs.
  • Fixing on the frame of the hubs for the support pneumatic rollers and the take-up station. The attachment points of the hubs to the frame are reinforced with overlays made of sheet steel 10 mm thick.
  • Equipment in the rear of the welded engine compartment housing and housing the power plant, gearbox and variator. The engine is mounted on VAZ shock-absorbing cushions.
  • Installation of brake calipers on the drive stars, through which the machine will be controlled, laying to the operator’s place of the lever system leading to the steering levers or pedals.
  • Manufacturing of caterpillars. The two strips of the conveyor belt are connected by metal tracks made of angle steel. Leave a distance between the strips for the teeth of the drive sprocket.
  • Equipment of a place for the operator and passengers, welding of the frame for the awning. Installation of attachments.
  • Commissioning and sea trials.

Blueprints

Inspection of a factory or home-made vehicle, sketching and photographing of their working units will make it possible to complete high-quality working drawings of caterpillar all-terrain vehicles equipped with a Lifan engine and fracture-type machines.

Assembling a tracked snow and swamp vehicle or a trike on low pressure tires according to a pre-drawn plan will save you from numerous design changes and fit of parts.

With a motor from a moped

a moped tiller is a tiller with a D-8 engine or with an Sh-50 engine. That is why for the full functioning of the structure, it is necessary to install an analog of the cooling system. Usually, for this, a tin vessel is soldered around the cylinder, which is intended for pouring water into it.

Important: the water in the vessel must be changed regularly, make sure that the temperature of the cylinder does not exceed 100 degrees Celsius. That is, if you notice that the water has begun to boil away, then you need to suspend work, cool the engine and replace the fluid.

Also, the device must be equipped with a gearbox using a bicycle sprocket. The bottom of such a design will be a power thrust, so the output shaft must be secured and reinforced with metal bushings, which must be tightly attached to the gearbox.

In addition, the tiller can be made from a snowplow, from a trimmer.

Features of the

Before starting the production of a motor-cultivator, you should decide what type of agricultural unit you will design: with an electric motor or with an internal combustion motor. It is important to remember that a motor cultivator with an electric motor will be effective only if there is an energy supply system in the area to be cultivated. On the contrary, a device containing an internal combustion engine can be used in the field, since it runs on fuel, namely, gasoline.

Important: the maintenance of gasoline motor-cultivators will require a greater amount of financial resources, and it is also quite difficult to maintain them technically.

Another important nuance is the method of soil cultivation. There are cultivators that have wheels with a drive, as well as those units that are equipped with attachments (the latter can serve not only as tillers, but also as a means of transportation).

Manufacturing scheme

Many experts argue that you should design a gasoline-type tiller on your own and at home.

From the chainsaw “Friendship”

Most often, home-made motor-cultivators designed for processing a small private area are made using a Druzhba chainsaw. The thing is that the manufacturing procedure itself is quite simple, and the Druzhba saw can be found in the household of many homeowners.

First of all, you should take care of the manufacture of the frame for the unit. Remember that the frame must be cubic. The engine from the chainsaw is placed and firmly attached to the upper corners of the designed frame, and the fuel tank is installed slightly lower, and the fasteners for it must be prepared in advance.

It is also imperative to use the vertical frame racks: they will accommodate the intermediate shaft supports.

Important: remember that the center of gravity of this design is above the wheels.

How to make a motor cultivator with your own hands?

  • Features of the
  • What elements are required for assembly?
  • Manufacturing scheme
  • From the chainsaw “Friendship”
  • With a motor from a moped
  • Useful Tips
  • How to fix breakdowns yourself?

A motor-cultivator is an analogue of a mini-tractor, its kind. A motor-cultivator (popularly, this device is also called “tiller”) is designed for soil cultivation. This agricultural machinery is produced both in Russia and abroad, and therefore is widely represented on the market. However, it is worth noting the fact that the purchase of a motor-cultivator can cost a fairly large amount. In this regard, many craftsmen with little knowledge of technology, as well as possessing some improvised materials, make a motor cultivator on their own at home.

Useful Tips

In order for your motor-cultivator to work efficiently enough and serve you for a long time, you need to take into account some expert advice.

  • If you could not find 1 powerful one, then you can use 2 low-power motors (no less than 1.5 kW each). They need to be fixed to the frame, and then from two separate elements you need to create a single system. Also, do not forget to put a double-strand pulley on one of the engines, which will transmit torque to the pulley of the working shaft of the cultivator gearbox.
  • In order to correctly and efficiently assemble a cultivator with your own hands, you must be guided by the drawings.
  • Due to the fact that the rear wheels are support wheels, they should be attached to the frame by means of an axle with bearings.

What elements are required for assembly?

If you decide to design a tiller yourself, then you need to prepare the following set of building blocks:

  • an internal combustion motor or engine;
  • gearbox. it is able to reduce the speed and increase the efforts on the working shaft;
  • the frame on which the equipment is mounted;
  • control handles.

It is these details that are the main ones. without them, it is impossible to make a machine for agricultural land cultivation at home. Therefore, before starting the manufacturing process, make sure that each of the items described above is present.

How to fix breakdowns yourself?

In the event that you make a mini-tractor with your own hands, you cannot avoid minor breakdowns and malfunctions. In this regard, their solution should be foreseen and considered.

  • So, in the event that you cannot start the engine, then most likely there is no spark. In this regard, it is necessary to replace the plug of the device. If this does not work, then try to clean the filters (usually they are washed in gasoline).
  • If during the operation of the tiller you notice that its engine stalls quite often, then keep in mind that this may be due to broken spark plugs or poor fuel supply.
  • If during operation the unit emits a strange extraneous sound, then the reason most likely lies in the breakdown of one or more parts. In this case, you must immediately stop work, disassemble the motor and identify the breakdown. If you ignore this, the engine can jam.
  • If the engine makes a lot of noise and overheats quickly, then the reason for this disadvantage may be that you are using poor quality fuel or you are overloading the device. Thus, it is necessary to suspend work for a while, give the unit “rest”, and also replace the fuel.

How to make a motor cultivator with your own hands, see the video below.

Snowmobile based on tiller, skis and bike parts

Agricultural work is carried out during the summer season. In winter, the engine of an idle tiller is suitable for the role of the power plant of an all-terrain vehicle for driving through snowdrifts, which you can assemble yourself. With the arrival of spring, it returns to its place.

How to make a chainsaw tiller

The following products and materials are used:

  • Motorcycle steering wheel.
  • Transmission from an old moped.
  • Stainless steel pipes with a diameter of 20-30 mm.
  • Wheels with pneumatic tires from a car or agricultural machinery. An alternative is homemade metal rims with grousers. For their manufacture, you will need a steel sheet and a corner.
  • Bolts and nuts.

The engine is removed from the chainsaw. It is recommended to take a professional tool with a 10-13 hp motor.

The work is performed in the following order:

  • The stainless pipe is bent into a U-shaped frame. The ends of the “legs” should be bent up.
  • Reinforce the structure with jumpers made of the same material.
  • Weld on the steering wheel.
  • Attach the plate for installing the battery using electric welding.
  • A muffler is made from a piece of pipe with a diameter of 7 cm and a length of 250 mm. The internal space is filled with sawdust so that the size of the outlet is no more than 1.6 cm.
  • A small U-shaped frame for the engine is made from a pipe with a diameter of 4 cm. Bolt brackets are welded to the edge and in the middle.
  • Install the motor on the frame and screw it.
  • Attach axle shafts reinforced with a cotter pin and install wheels on them.
  • At the end of the process, the steering wheel, gearbox and gas tank are attached.

It remains to test the car in the field.

Undercarriage assembly

To install rubber from GAZ-53, wheels of increased diameter are required.

They are made in the following sequence:

  • 6-8 sections of profiled pipe laid across (parallel to the axis) are welded to the disks from the VAZ car evenly around the entire circumference.
  • Reinforcement in the form of a ring is wound on the ends of the rods and fixed by welding.
  • Several concentric rings made of wire are placed in the inner space of the circles. All of them are combined into a one-piece structure by means of spokes oriented from the center of the wheel to the edge. The intersection points of the round and beam parts are welded.

The resulting rollers are fitted with truck tires.

Next, perform the actions:

  • Attach the transmission from the “Zhiguli” to the frame.
  • Assemble the rear axle and steering gear.
  • Install the brake drum from the Voskhod motorcycle.
  • Fix the wheels.

Tire pressure is selected empirically.

Homemade all-terrain vehicle from a ready-made tiller

This unit is available in many households. The universal mechanism is used to solve a number of tasks, depending on what kind of replacement equipment is installed: a blade for clearing roads from snow, a cultivator, a plow, a mulcher, etc. By making small changes to the design, you can turn an agricultural attachment into an SUV.

What parts and tools are needed

  • Bridge from a rear-wheel drive vehicle, for example VAZ or AZLK.
  • Reduction gear.
  • Semi-axles with hinges of equal angular velocities from a passenger car “Oka”.
  • Profiled pipe.

Tools and fixtures:

  • welding machine;
  • angle grinder or hacksaw;
  • drilling machine or drill;
  • roulette;
  • spanners;
  • screwdrivers;
  • hammer;
  • chalk (for marking).

Brushes are required for painting metal structures.

Final stage

At the end of the procedure, the metal frame of the SUV is sanded, primed and painted. The headlight is screwed in front for driving at night.

Execution options

At home, they collect 2 types of caracats. Each has its own merits and demerits.

Three-wheeled all-terrain vehicle

Assembled on the basis of a motorcycle. 2 wheels are installed at the back (axle shafts or road axle), in front. 1 (on the fork).

If the vehicle is to be operated only in the summer season, the cab is not installed.

Otherwise, a primitive aluminum profile booth is attached.

  • Light weight.
  • High maneuverability.
  • Compact dimensions.
  • Poor traction (2-wheel drive).
  • Low lifting capacity.
  • A large amount of work in self-production.

In addition, the semi-axle model turns poorly due to the lack of a differential. In early versions, a ski was installed in front. Such a car is easier to assemble, but it does not have buoyancy.

The option with a one-wheel front end turned out to be more practical.

He overcomes wetlands and rivers; does not go to the bottom if the ice underneath breaks.

Homemade mini tractors with their own hands with a Lifan engine

Accessories

Transmission part

Electrician

Useful articles

Drive chains

welding equipment

How to make a cultivator from available materials

Before starting work, it is worth understanding the types of mechanisms that are designed to cultivate the land. According to the type of the power mechanism installed in the unit, they are divided into products with an electric motor, as well as with an internal combustion engine. The first type of mechanisms should be chosen only if there is power supply on the site.

All designs with an internal combustion engine can be used on any site, as they run on gasoline. It is worth remembering that when using them, you need to spend more money, but at the same time they are more effective. It should be remembered that their maintenance is more complicated.

Also, motor cultivators differ in the methods of soil cultivation. Some products are equipped with wheels with a drive, while others are equipped with attachments that simultaneously serve as a means of movement and a tool for working the land. In the first case, two gearboxes are used. The first is necessary to move the device at a certain speed. The second one rotates the attachment.

It is worth noting that there are also tillers in which the wheels are not driving, but are installed as a support on the ground, thanks to these elements, the movement of the unit is simplified. In this case, the movement of the unit occurs due to the rotation of the attachment. It is worth noting that when using mechanisms without driving wheels, you have to spend more effort to keep a homemade cultivator on a given trajectory. That is why many land owners create cultivators with driven wheels, which makes the process of soil cultivation easier.

The cultivator wheels allow you to more effectively control the depth of the attachment in the ground. It is worth remembering that products with one drive axle have several advantages. For example, you can put wheels on an axle, and a plow behind them. Also, instead of wheels, you can fix volumetric cutters for loosening. It is worth remembering that a creeper must be installed on the cultivator. Such a device helps with wheel slip, as well as when working on heavy soils.

From the chainsaw “Friendship”

Most often, home-made motor-cultivators designed for processing a small private area are made using a Druzhba chainsaw. The thing is that the manufacturing procedure itself is quite simple, and the Druzhba saw can be found in the household of many homeowners.

First of all, you should take care of the manufacture of the frame for the unit. Remember that the frame must be cubic. The engine from the chainsaw is placed and firmly attached to the upper corners of the designed frame, and the fuel tank is installed slightly lower, and the fasteners for it must be prepared in advance.

It is also imperative to use the vertical frame racks: they will accommodate the intermediate shaft supports.

Important: remember that the center of gravity of this design is above the wheels.

With a motor from a moped

a moped tiller is a tiller with a D-8 engine or with an Sh-50 engine. That is why for the full functioning of the structure, it is necessary to install an analog of the cooling system. Usually, for this, a tin vessel is soldered around the cylinder, which is intended for pouring water into it.

Important: the water in the vessel must be changed regularly, make sure that the temperature of the cylinder does not exceed 100 degrees Celsius. That is, if you notice that the water has begun to boil away, then you need to suspend work, cool the engine and replace the fluid.

Also, the device must be equipped with a gearbox using a bicycle sprocket. The bottom of such a design will be a power thrust, so the output shaft must be secured and reinforced with metal bushings, which must be tightly attached to the gearbox.

In addition, the tiller can be made from a snowplow, from a trimmer.

Manufacturing scheme

Many experts argue that you should design a gasoline-type tiller on your own and at home.

Homemade motor cultivator: making an electric and gasoline unit

  • Internal combustion engine or electric motor. The electric drive can be borrowed from an old industrial compressor or ventilation system. As an internal combustion engine, an engine from a moped is optimal. It is not uncommon for a home-made motor-cultivator to be assembled on the basis of a chainsaw. In any case, you will need to take care of an effective cooling system so that the motor does not overheat;
  • A gearbox is an indispensable part of any agricultural unit. The high speed that is observed on the shaft turns out to be too high for a small motor, therefore, the reduction gear will help to reduce the speed and increase the force on the working shaft;
  • Handles for operating the unit. They serve as organs for holding the cultivator. Also on the handles you need to place the gearshift levers and clutches. In any case, the device should be as comfortable as possible.

Having found all these elements, you can start assembling. To make as few mistakes as possible, we advise you to prepare an approximate drawing, in which you need to indicate the connection sequence for each of the nodes.

Transmission

For a home-made diesel tiller, however, like a motor-cultivator, you will need chains, sprockets, and an adapter shaft. They are mainly borrowed from decommissioned motorcycle, auto, agricultural machinery. The hubs of the stars are not difficult to make yourself, using pieces of iron and a lathe, since it is easy to find a detailed drawing or video on this topic on the Internet. A ready-made gearbox for a homemade product is taken from any model of a moped. In the preparation of a homemade gearbox, steel plates and cylindrical discs with teeth are used. You can install a homemade differential.

The kinematic scheme of homemade products is created as simple as possible in order to ensure greater reliability of the functioning of its mechanisms. The transmission of torque from the engine to the intermediate shaft is organized by means of a standard roller chain with a driving and driven sprocket. At the same time, the gear ratio of the intermediate is increased and the rotational speed of the output shafts is reduced.

Sometimes a so-called creeper is included in the transmission of a tiller or motor-cultivator. This is a reduction gearbox, which is necessary to obtain slow operating speeds (The video shows step-by-step instructions on how to assemble a creeper).

The installation of this device allows you to improve the management of homemade products and make its operation safe for humans. The creeper is bought or assembled on their own. How to make a hodo reducer yourself and what you need for this, you can watch both in the video and inquire on thematic forums organized by skilled techies.

Do-it-yourself cultivator with an electric drive

Two 1500 W electric motors are used as a power plant. They are combined into a single system using a belt and pulleys of the same diameter. On one of the motors, the pulley is double, and with the help of the tension roller, the torque is supplied to the working pulley connected to the primary shaft of the gearbox.

The rear wheels are not driving; when installed on the front axle of the rotor nozzle, they become a supporting structure. If you put wheels on the drive axle, the rear axle gives stability to the structure. With this arrangement, you can attach a variety of attachments, from a flat cutter cultivator to a lance ripper.

THAT’S COOL! IMPROVED ENGINE from a motor-cultivator ON A HOMEMADE SNOWMOBILE | 10% POWER

The gearbox in this design is used ready-made, from a broken “Neva” tiller. After replacing worn out gears. performance is restored.

The advantage of such a gearbox is the durability of the casing. Therefore, it is used as a constructive element of the cultivator. The front drive axle is an extension of the output shaft of the gearbox.

The frame is assembled from scrap materials, from a powerful ventilation system, from decommissioned military equipment. From the same place, taken aluminum pipes for the rack of the control handles. The attachment bracket is made from a plow holder from discarded agricultural machinery. Wheels were taken from her.

The only item purchased is the power cable. The length of 20 m is enough for processing a land plot with an area of ​​4 ares, with a socket installed in the corner of the field.
Motor-cultivator with a moped engine.

A drawing of the device is shown in the illustration:

The D8 moped motor was used as a power plant. Air cooling on the cultivator does not work due to the low speed. Therefore, a tin container is soldered around the cylinder, into which water is poured. Periodically adding liquid, you do not allow the cylinder block to heat up above 100 ° C.

Chain reducer, two-stage.
Bicycle and moped sprockets are used. The casings are welded from 3 mm thick sheet steel. The lower stage of the gearbox has a power function, therefore the output shaft is reinforced with steel bushings fixed on the gearbox housing.

Conclusion: The designs turned out to be durable and reliable, tested by more than one dozen gardeners. You can always make changes to any of them based on the materials you have.

A motor cultivator with a moped engine. video. A homemade frame is welded from a 40x40x5 corner and a 20×20 profile pipe. A gearbox from a VAZ 2101 is installed, the transmission from the engine to the box is carried out through a chain. Everything is simple and tasteful. Other details in the video clip.

Components of a motor-cultivator

Cultivators consist of the following elements:

  • Power point. As which can be installed an electric motor or internal combustion engine. The electric drive can be disconnected from the old ventilation system or the motor of an industrial compressor can be used. If you choose an internal combustion engine, you can use an old moped. But it is worth remembering that in this case it is necessary to create a cooling system. When removing the gasoline engine from the chainsaw, this problem does not arise.
  • Reducer (creeper). This element is required when creating any motor-cultivator. This is because the speed of the motor output shaft is too high and the torque in small motors is not high enough for soil cultivation. By installing a reduction gear, the speed is reduced, which contributes to an increase in the force on the working shaft.
  • Frame. When creating a frame for a motor cultivator, it is worth remembering that even if it is created for a single purpose, it is worth installing a bracket on it. It can be used to attach various attachments.
  • Pens. With their help, the device is controlled. All controls for the cultivator should be located on the handles. When creating handles, it is worth remembering that they must be durable and comfortable enough.

Drawings for a homemade cultivator can be taken from technical literature or created based on factory models. If you are looking for ready-made drawings, it is worth remembering that when using them, you will be forced to look for certain components for a future design. Before making a motor cultivator from a saw with your own hands, it is worth considering the design of ready-made products in order to understand exactly how such designs work.

Homemade motor cultivator

Many land owners know that cultivating the soil with hand tools takes a lot of time and effort. That is why mechanical devices are becoming more and more popular. But since quality devices are quite expensive, many landowners create such devices with their own hands. If you have a welding machine and some materials, it is quite simple to create a cultivator if the diagram of such a device has been created in advance.

How to make an electric motor cultivator

Anyone who is at least a little familiar with the principle of operation of such equipment can make an electric motor cultivator.

To work, you need the following details:

  • grinder motor;
  • metal pipes;
  • corners;
  • wheels with axles;
  • screw;
  • scrap.

To create an electric cultivator, you will need tools such as a welding machine, a sledgehammer and a set of keys. Also, pliers and a hammer will be used in the process. The creation of a motor cultivator is as follows:

  • First, 2 corners are screwed to the metal housing of the gearbox.
  • After that, you need to bend the ends of the two tubes to create handles. The pipes must then be welded to the corners.
  • Then axles for wheels are welded to the corners. When choosing wheels, it should be borne in mind that too large products are inconvenient. If small wheels are installed, the cultivator will bury itself on soft ground. Therefore, they must be medium in size.
  • After this, the structure shaft is created. With a sledgehammer, it is necessary to break the nozzle from the grinder and place the workpiece, which is created from scrap, into the sleeve.
  • Then you need to weld the lug screw.
  • On one of the previously created handles, you need to attach the engine switch. To use the unit more conveniently, it is worth placing the controls based on the size of the hand.

It is worth remembering that when moving quickly, the cultivator is able to break the ground into clods. If the created device works slowly, this will lead to the fact that the soil becomes soft and the processing will be done more accurately. Such electric homemade products allow you to process small areas.

How to make a cultivator from available materials

Before starting work, it is worth understanding the types of mechanisms that are designed to cultivate the land. According to the type of the power mechanism installed in the unit, they are divided into products with an electric motor, as well as with an internal combustion engine. The first type of mechanisms should be chosen only if there is power supply on the site.

All designs with an internal combustion engine can be used on any site, as they run on gasoline. It is worth remembering that when using them, you need to spend more money, but at the same time they are more effective. It should be remembered that their maintenance is more complicated.

Also, motor cultivators differ in the methods of soil cultivation. Some products are equipped with wheels with a drive, while others are equipped with attachments that simultaneously serve as a means of movement and a tool for working the land. In the first case, two gearboxes are used. The first is necessary to move the device at a certain speed. The second one rotates the attachment.

It is worth noting that there are also tillers in which the wheels are not driving, but are installed as a support on the ground, thanks to these elements, the movement of the unit is simplified. In this case, the movement of the unit occurs due to the rotation of the attachment. It is worth noting that when using mechanisms without driving wheels, you have to spend more effort to keep a homemade cultivator on a given trajectory. That is why many land owners create cultivators with driven wheels, which makes the process of soil cultivation easier.

The cultivator wheels allow you to more effectively control the depth of the attachment in the ground. It is worth remembering that products with one drive axle have several advantages. For example, you can put wheels on an axle, and a plow behind them. Also, instead of wheels, you can fix volumetric cutters for loosening. It is worth remembering that a creeper must be installed on the cultivator. Such a device helps with wheel slip, as well as when working on heavy soils.

How to make a chainsaw tiller

Most often, motor cultivators are created from a chainsaw, since many site owners have similar devices. The manufacturing process begins with the manufacture of the unit frame. The structure to be created must have the shape of a cube. The engine is mounted on the upper corners, and the unit’s fuel tank is mounted below on pre-made mounts. The vertical posts of the foreground frame are intended for the location of the intermediate shaft supports.

The result is a self-made saw tiller, the center of gravity of which is located above the wheels. Thanks to the simple design, you can repair the cultivator with your own hands.