Professional builders have in their arsenal a special tool to combat the resulting flour: a nozzle on a drill or a drill, to which a hose is connected from a vacuum cleaner. Such an addition to the pedorator helps to collect garbage very cleanly, but he has a number of disadvantages:
- You have to spend money on the purchase of the nozzle. Such expenses are appropriate if you have to drill constantly. But if occasionally you have to drill one or two holes in the ceiling or wall, buy a special nozzle irrationally.
- As a rule, the use of the nozzle requires the help of a partner who will keep a vacuum cleaner. In everyday life, improvised devices made by yourself are used to solve the same problems.
With verlim without dust holes in the ceiling and walls.
In front of this topic “Drill (Burim) without dust”, I said how to cut without dust using a corner grinder. This process was described in the article installation of a stroke without dust. Well, now I was asked to tell how to do this only when working with a drill or a pedorator. So forward for new knowledge and decisions, because methods will be presented that will allow you to drill and drill so that the dust from under the drill will not fly around the room and as a result of which, for you, do not have to be long and tedious for you! We tell you how to make it so that when drilling a ceiling (with a drill, crown), concrete or plaster crumb did not fall on your face for you!! Go.
All builders are faced with a problem when drilling, drilling holes in the ceiling and walls. When in the eyes, on the floor and pieces of furniture, as well as arms, a peorator or drill, it is poured with small, or even large fractions of drilling waste, simply dust particles.
So, I propose to fight this small trouble by the grandfather’s method, by putting on a drill, drill, ordinary plastic or cardboard, a glass!!
Just stick a drill in the center of the glass, the glass is completely looking towards the drilling and at the time of drilling crumbling dust, particles of concrete fraction will fall into a plastic cup, which will greatly simplify the further cleaning of the apartment and protect your eyes from dust. At least this business and you should have glasses. Well, if anything, it will not get into the mouth!! :))
This method of drilling, drilling without dust, fits under the sowing or a boat of at least ten centimeters including the heel of the drill! Otherwise, the selected capacity will need to be shortened along the length.
You can drill the wall so without dust, only in this case a vacuum cleaner or a glued bag on the wall will help us in the place in which you were going to make a hole.
At the moment when you will drill the wall, your partner or you yourself, you will have to substitute the vacuum cleaner under the hole. The vacuum cleaner will suck everything out of under the drill and will not let it fly up or crumble. So we figured out how to drill a hole in the ceiling and wall without dust with a drill, and a peorator.
Further a little more instructions and, as always interesting. in which I cut six short rollers, which shows methods of drilling holes without dust, where dust is captured using special purchased devices, and using homemade pieces.
Without resorting to the use of special droplets with nozzles drawing air, Americans do a great job.
When drilling a wall or ceiling, they are used not like we are a plastic cup or vacuum cleaner, but a specially designed package, into which the entire small fraction gets during the drilling.
This container is dressed at the drill and when rotating the drill, by analogy, by grooves, the package is developing. In the photo below, this is clearly visible.
How to choose a drill
The peorator is not a cheap tool, so we will tell you what parameters to pay attention to when buying a drill drill.
- So, the power of the tool itself should be at least 600 watts.
- The number of revolutions should reach up to 2500 and it will be excellent if the drill has a smooth adjustment of these revolutions, from zero to maximum.
- It is desirable that the tool has a reverse function when when jaming the drill, it was possible to twist it back.
- Of course, if you plan to drill concrete and brick, you cannot cope without shock function, so your drill should be a shock type.
Conductor for drilling
The use of such a device will not only reduce the amount of dust in the process, but will also help not shift when drilling and make a more accurate hole. From plywood or other suitable material it is necessary to make a bar and drill holes in the designated places. Such a bar is fixed on the wall using bilateral tape, glue or other fastening element. Another, in the form of a kind of shelf, is fixed to the bottom of the bar at an angle of 90 degrees. So, garbage will settle on a horizontal bar to reduce the amount of waste on the floor and facilitate cleaning after.
Drilling with a peorater without dust or how to work as a peorator without dust
When the as the ash is drilling in concrete or brick, a lot of dust is formed. When the construction processes are coming, it does not bother anyone. If you need to drill a hole in a living, clean room, this becomes a problem. Dust, especially brick, ruins wallpaper, upholstered furniture and other interior elements.
In the article we will discuss how to work with a peorator without dust. Or how to neutralize it during work.
Drilling holes with a peorator without dust.
Disadvantages when using a vacuum cleaner
Some use a vacuum cleaner. This is a good option to avoid dust when drilling by a bypers, but not always acceptable. This device may not be at hand. Two people are needed to work with him. One brings the hole by the as a ash, the other holds the absorption tube of the vacuum cleaner next to the working part of the drill. All dust is absorbed into the vacuum cleaner. But one in this situation cannot be cope. It is inconvenient to monitor two working devices at the same time, holding their parts in the right places.
How to drill a wall without dust
To drill the wall with a peorator without dust, two things will be required: adhesive tape and plastic bag that are used for packing.
Adhesive tape is preferable to use the male. We mark future holes on the wall in the right places. Glue under the mark on the wall with tape openly open plastic bag. He must hold in such a way that the dust from drilling is pouring inside him. Can be carefully drilled, the main thing is not to “go out”. Then the waste is poured into the kulek.
It is worth adding the speed of the penetrator, as part of the unit will smash around the air flow from the engine fan. If you beat carefully, at low speeds, then the process will just be remarkable. You will collect all the dust in a plastic bag. It can be used repeatedly.
An important point: tape must be glued to the wall very tightly. Not the density of gluing will lead to the fact that the dust will sprinkle between the wall and tape and stain the wallpaper.
How to drill a ceiling with a peorater without dust
Here the situation is more complicated. You can apply the same design that was described in the previous paragraph. But the effect of her will be worse. As an option, we use a disposable plate, or a disposable plastic container, punctured in the middle. If you do not add speeds, most of the cork when drilling the ceiling will fall into this additional element. When working, this plastic part will need to be held with a hand in order to avoid its rotation.
Poorator drilling without dust ceiling.
The best option in this case will still be a vacuum cleaner.
In general, decide on how to work as a penister without dust in accordance with the situation.
Why fight dust?
However, all these measures only reduce the damage. Dramatically solve the problem, the devices that collect dust during its formation allow.
Professional builders have in their arsenal a special tool to combat the resulting flour: a nozzle on a drill or a drill, to which a hose is connected from a vacuum cleaner. Such an addition to the pedorator helps to collect garbage very cleanly, but he has a number of disadvantages:
- You have to spend money on the purchase of the nozzle. Such expenses are appropriate if you have to drill constantly. But if occasionally you have to drill one or two holes in the ceiling or wall, buy a special nozzle irrationally.
- As a rule, the use of the nozzle requires the help of a partner who will keep a vacuum cleaner. In everyday life, improvised devices made by yourself are used to solve the same problems.
How to drill a concrete ceiling without dust!
Drill concrete or, for example, brick is a simple matter. To do this, you need to have only a cool shock drill and a special drill with winning attacks. It is clear that it is also necessary to psychologically configure yourself to noise and dust, because you can still survive the roar, but seeing stained carpets, furniture and favorite household appliances is a difficult matter for the heart. But there is one method. Its only minus that it works only when drilling the ceiling.
So. In order to drill concrete without dust, you need to make a paper funnel and attach it to the drill.
Everything is extremely simple. For this simple creation, it is necessary to take paper and tape.
A) Cut the paper blank of rectangular shape. No measurements need to be done, everything as they say, by eye. The action is simple and it is not difficult to repeat a couple of times, so that everything would fit the drill perfectly.
B) cut off strips of adhesive tape and prudently glue them to the edge of the table with one end so that it is easier to work.
C) then you need to take the drill, insert the drill into the cartridge and wrap the paper around the cartridge so that the aforementioned funnel is obtained. The bottom of a homemade funnel should be below the cartridge so that when it will rotate the funnel remained not fixed not mobile. Then we glue the edges of the paper.
D) and the last moment. With tape, we glue our paper product to the drill, using the short strips of adhesive tape. We glue carefully so that there are no cracks, otherwise building garbage will be poured on the floor and all of the above actions will be unsuccessful.
Recall once again. The paper funnel is not suitable for working with the walls, only for working with the ceiling.
I liked it 2 times: 1 user
Sobs-but Sabzh. Available: Drill on concrete, drill, ceiling, and not quite crooked hands :). The required hole size is 8mm.
I tried yesterday to peel the cornice. I outlined kuda I will drill. And the drill goes a little to the side, as soon as it rests against concrete. You try to drill further, the drill is trying to go aside. The hole is more than follows.
Disadvantages when using a vacuum cleaner
Some use a vacuum cleaner. This is a good option to avoid dust when drilling by a bypers, but not always acceptable. This device may not be at hand. Two people are needed to work with him. One brings the hole by the as a ash, the other holds the absorption tube of the vacuum cleaner next to the working part of the drill. All dust is absorbed into the vacuum cleaner. But one in this situation cannot be cope. It is inconvenient to monitor two working devices at the same time, holding their parts in the right places.
To drill the wall with a peorator without dust, two things will be required: adhesive tape and plastic bag that are used for packing.
Adhesive tape is preferable to use the male. We mark future holes on the wall in the right places. Glue under the mark on the wall with tape openly open plastic bag. He must hold in such a way that the dust from drilling is pouring inside him. Can be carefully drilled, the main thing is not to “go out”. Then the waste is poured into the kulek.
It is worth adding the speed of the penetrator, as part of the unit will smash around the air flow from the engine fan. If you beat carefully, at low speeds, then the process will just be remarkable. You will collect all the dust in a plastic bag. It can be used repeatedly.
An important point: tape must be glued to the wall very tightly. Not the density of gluing will lead to the fact that the dust will sprinkle between the wall and tape and stain the wallpaper.
How to drill a ceiling with a peorater without dust
Here the situation is more complicated. You can apply the same design that was described in the previous paragraph. But the effect of her will be worse. As an option, we use a disposable plate, or a disposable plastic container, punctured in the middle. If you do not add speeds, most of the cork when drilling the ceiling will fall into this additional element. When working, this plastic part will need to be held with a hand in order to avoid its rotation.
Poorator drilling without dust ceiling.
The best option in this case will still be a vacuum cleaner.
In general, decide on how to work as a penister without dust in accordance with the situation.
Articles :
The article considers the process of manufacturing simple holders, stands and shelves for a manual instrument for a home workshop.
The options for homemade lateral stops for a carpentry workbench are considered. The drawing is presented and the procedure for the manufacture of one of.
A master class on replacing a failed nickel-cadmium battery of an electric screwdriver for a modern lithium-polymer.
Step.by.step instructions with a photo considers the process of manufacturing with your own hands a simple tep.
The article considers the process of manufacturing and using a simple device to work with a manual circular saw, providing an accurate.
How to drill holes without dust and garbage
Tired of removing dust and dirt after each drilled hole in the apartment? Thanks to our “life hacks” you can drill holes without dust and garbage!
In this article we will offer several options that will help you drill a hole without dust.
We use a vacuum cleaner
It would seem a simple device, but it really works. The essence is simple, while driving a drill, directly next to the hole, you need to keep the vacuum cleaner hose (it is better to remove the nozzle).
As a result, all soap and garbage from the hole will be absorbed into the vacuum cleaner, without polluting your apartment.
If you have a repair, and you need to drill a lot of holes, you can buy a special nozzle-pile for a drill, or make it yourself from improvised means.
The envelope on the wall
If the hole is drilled in a vertical wall, an excellent option would be a glued paper envelope, right under the hole. In this case, all dust from the hole will fall not on the floor, but in this envelope. The envelope is made and attached to the wall using ordinary tape.
This is the easiest option. Such an envelope will not collect all dust, but 80-90% will be withheld on the envelope.
Bricks Design with sponge Amazing Art
The envelope on the drill
This option is more suitable if the hole is drilled in the ceiling. It is enough to wrap the base of the drill with paper, thus constructing something like a “cat” and fix it with tape.
Why fight dust?
Therefore, with dust during the repair, it is customary to fight with all available means. To protect your eyes, hair and skin, the builder wears special clothes, protective glasses, a headdress and PPE of the respiratory system (a respirator or a gauze bandage). Furniture and other things that cannot be removed from the room for the duration of the repair are covered with newspapers or polyethylene.
Devices and power tools are produced in dusty buildings. The degree of protection of the device from dust will help to find out the protection index from dust and water from entering the vehicle if the device has an IP5x or IP6X index, it is not afraid of dust inward.
However, all these measures only reduce the damage. Dramatically solve the problem, the devices that collect dust during its formation allow.
We recommend: in which way it is better to remove the old paint from the metal?
Drilling technology
There are three ways to drill a hole in the brick wall: manual, electromechanical and automatic.
However, before starting work, it is necessary to study the location of the electrical wiring, since an accidental hit in a fishing line for a trimmer of wiring will not only damage it, but can also hit the human current.
Most often, the wiring is located vertically or diagonally relative to sockets and switches. With existing doubts, it is worth using a special device for detecting wires of hidden wiring. A portable metal detector will help detect an aluminum wire or copper, located no deeper than 1 cm.
Manual drilling technology
In the absence of an electric tool, drilling holes can be done using a hat. For this, places are preliminarily outlined by drilling with a punch.
After that, along the player, which is applied to the wall at an angle of 90 degrees, hit with a hammer. Every three blows, the nobleman is turning, and the remains of brick are removed from the pipe. Thus, the hole is knocked out until it reaches the necessary depth.
How to drill without dust: options than better
Construction work is always accompanied by dust and garbage, but using some recommendations and tips, it can be significantly reduced:
- The peorator leaves insignificant dust when working so that it does not fly around the room at the same time use a construction vacuum cleaner. Some tools of the tool have a built.in vacuum cleaner, which facilitates the task;
- Using a drill, it is best to make either a conductor at the end or heap, or make an envelope under the hole so that the garbage falls into it.
How to drill holes in a brick wall: the choice of tools and nozzles
To make a hole in the brick wall, a peorator with a drill or a shock drill is suitable, most often use the latter. Its power should be at least 600 watts, the minimum number of revolutions is from 2500 per minute. It is best to use a drill with a smooth power adjustment and a fast clamp function.
Applying the function of shock drilling, the drill becomes identical to the pedorator. The speed and simplicity of work increases. To make a hole in the brick wall, you need to use a dynamic blow method. Without this, the drill cannot catch on the inside of the brick.
Than to drill a carrier wall in a panel house with a penetrator
In most panel houses, the walls are made of concrete to make a hole with a peorator, you need to use the winning.
In addition to them, you can use special crowns. They have attacks on the circle. When using them, you need to turn off the shock function of the penetrator.
Experts use diamond drilling, for this you need powerful equipment and skills.
How to properly drill a reinforced concrete drill under the pipe
Using a shock drill for reinforced concrete, you need to use the Poorator mode and the winning. At first, the hole is made of a smaller volume, then more. The drill should be cooled periodically.
Important! Working with concrete, you should not get into the reinforcement, otherwise the drill will break. Using a special device, you can check where it is located
How to make a hole in the concrete wall drill
It is difficult to drill a concrete wall with a regular drill. You need to install the winning cords and choose small revolutions. An dowel is inserted into the right place to help the tool to break through the surface. Further drilling should be alternated with blows to dowel.
If the drill does not have a speed adjustment, then it will not be possible to make a hole.
How to make a hole of a concrete wall in an apartment with a drill
For a small hole, you can use the punch. It will make, most conveniently, from a drill, a diameter of 8 mm. The end is sharply sharpened. The drill is placed in the right place, turning, while hitting it with a hammer. Moisten the drill periodically so that it works longer.
Work rules: tips
When working with tools, it is necessary to follow the safety rules and general recommendations:
- 1) Performing work protect the respiratory system, dust is harmful.
- 2) if you work outside, then you need to put fences 2.5 meters.
- 3) When performing work at an altitude of more than 1.5 meters, use a strong base. forest or goat.
- 4) Working as a tool, the turns must be turned on smoothly, and in no case should you turn off when it is in the body of the wall.
- 5) when drilling through the plaster, it is necessary to carefully study the communications plan so as not to hurt anything.
- 6) it is strictly forbidden to drill through a decorative coating.
- 7) Choose the right cord for each surface.
- Move the drill with water so that it does not overheat.
Simple industrial methods
In fact, dust captives are sold in any store selling electrical tools. They are a little expensive, but you can always save by making a purchase on AliExpress. Then it will be possible to purchase a dust capture of 5-10 r. cheaper.
If everything is in order with finances, a vacuum dust quip. It can be attached to the ceiling or wall. it just sticks under the influence of the suction force. While the vacuum cleaner is working, the dust quipper will stay on the surface.
In the middle of the device there is a hole into which a crown or drill is inserted.
There are dust dusts that are attached right on the drill. As they do work, they are advanced towards the corps. Such options are suitable if you make a hole in hard.to.reach places.
The minus of the presented method is a mandatory connection of the vacuum cleaner. If it is not, the device will be useless. However, there are also modern options on the market that do not require attracting additional equipment.
If you use the drill regularly, it is better to get a professional vacuum cleaner of the type “Buran” or “Rocket”. Otherwise, you just plant the engine engine. Modern devices quickly fail, but the old options can be called indestructible.
Bag, tube and elastic band
A cheap way to collect dust will be the use of a bag, tubes and elastic bands. Polyethylene is transparent, so everything will be clearly visible. The boiler is assembled from a tube with a hole, elastic band and bag. Everything, you can drill. You will definitely like the effect.
An important point! This option is not suitable for drilling the ceiling: it will be inconvenient.
You can choose any of the presented methods. They all really work.