EFCO lawn. The device and principle of operation of the starter on the trimmer • CIMFLOK.COM

EFCO service centers

We have found 35 EFCO service centers. You can leave an application for repairs to all of them. Compare EFCO services and select the best in terms of terms, cost, reviews and rating.

Trimmers for the grass EFCOMODODED: 8100 Replace the bell of the shaft fastening of the protection casing. Communication by phone. Ready to lead. Trimmers for grass EFCOMODODED: 8100 replacement of the terminal coupling Four bolt for attaching the casing of the EFCOMODODEDENE: 117E replacement of the power circuit breaker trimmers for the grass EFCOMODODDED: 8092 NOT TRAMMERS OF EFCOMODEDENT TRAMMERS: 8100 you need to replace the head, casing, coil with new ones. Trimmers for grass EFCOMODODED: 8130 EFCOMODODODE engine overheat: coal brushes to purchase charcoal brushes trimmers for the grass EFCOMODODED: ECCO 8130 Replacing the coal brinings of the EFCOMODED Lawn Model

Type: trimmer for grass, engine type: electric, cutting element of a trimmer for grass: fishing line for a trimmer, type of trimmer for grass: portable, rod design: curved, engine location: upper, shoulder belt, liability thickness: 2 mm, shock width: 34 cm, additional functions: anti.vibrational.

Gramadion Piston Group for Motokos Oleo-Mac 753, EFCO 8530

Piston for a trimmer for grass assembly EFCO (EFCO) Stark (Stark) 25

Cover TR 111 OLEO-MAC (art. 4199-035AR) 0LOO-MAC

Hand starter for EMAK K500, OLEO-MAC G44, 48, 53, EFCO AR44.48.53, LONCIN LC1P61FA, LC1P65FA, 1P70FA, Alco 1P61

The impeller G44pe, G48pe Oleo-Mac (art. 6602-0025ar)

Oleo-Mac shaft for TR60, 61, 92, Sparta25TR (0710-00005) 2OLEO-MAC

Gramadion Piston Group for Motokos Oleo-Mac 753, EFCO 8530 86

Anchor for InterS P 710/Sparky E240/241, Bur101/102 OR Kit (art. 002-2201) 63 whale.

The Oleo-Mac coupling for trimmers TR 60E, 61E, 91E (0710-00009R) 2

Belting analogue for EFCO AR 48 Tbq lawn moutines this wedge belt with a fabric wrapper and kordshnur from polyester is used in industry. Basic mothers used in the production of belt: compound made of natural rubber, kordshnur from polyester, polyamide.

EFCO AR 48 TBQ BARD belt

Belting analogue for EFCO AR 53 TBX lawn moutines this wedge belt with a fabric wrapper and kordshnur from polyester is used in industry. Basic mothers used in the production of belt: compound made of natural rubber, kordshnur from polyester, polyamide.

EFCO AR 53 TBX Badge

Belting analogue for EFCO AR 53 TK lawn moutines this wedge belt with a fabric wrapper and kordshnur from polyester is used in industry. Basic mothers used in the production of belt: compound made of natural rubber, kordshnur from polyester, polyamidn.

EFCO AR 53 TK gas mowing belt

OLEO-MAC, EFCO electrical circuit breaker

The stroke belt for the EFCO MZ 2100 R cultivator. Basic mothers used in the production of belt: compound made of natural rubber, kordshnur from polyester, Paul.

EFCO MZ 2100 R Cultivator Stop

The Oleo-Mac hub for TR91E, TR101E (4198-168R)

Trimmer head EFCO 41975 for 8110, 8100, 8130

Starter manual for EFCO lawn mower (EFCO), Stark (Stark) 37-44

Oleo-Mac shaft for TR60, 61, 92, Sparta25TR (0710-00005)

The set of the gearbox of the trimmer for the grass is upper 10 slits, the lower clamping whale.

Starter of a trimmer for grass OLEO-MAC 753T-755 EFCO 8530-8550 (art. 1332) Gramadion

Piston for EFCO lawn mower assembly (Stark25p) diameter 34mm EFCO

Cover TR 111 OLEO-MAC (art. 4199-035ar) 0

The stroke belt for the EFCO MZ 2080 R cultivator this wedge belt with a fabric wrapper and kordshnur from polyester is used in industry. Basic mothers used in the production of belt: compound made of natural rubber, kordshnur from polyester, Paul.

EFCO MZ 2080 R cultivator belt

Cover 755 Master. 753t Oleo-Mac (art. 6111-0074R) 7

SPARTA 25 Oleo-Mac air filter cover (art. 6116-0011R) 1

The Oleo-Mac hub for TR91E, TR101E (4198-168R) 8

Oleo-Mac starter drum for Sparta 25, S, TR (4161-148ar) 9

The Oleo-Mac coupling for trimmers TR 60E, 61E, 91E (0710-00009R) 2

Connective coupling Oleo-Mac for a trimmer for grass TR 111E (6003-0029) 0

Starter assembly for the Oleo-Mac / Sparta 753-755 / EFCO 8530 lawn mower

Protection assembly TR11E. TR130E OLEO-MAC (art. 4198-115C)

The stroke belt for the EFCO MZ 2095 R cultivator. Basic mothers used in the production of belt: compound made of natural rubber, kordshnur from polyester, Paul.

EFCO MZ 2095 R cultivator belt

Oleo-Mac shaft for TR60, 61, 92, Sparta25TR (0710-00005) 2

The stroke belt for the EFCO MZ 2090 RXS cultivator this wedge belt with a fabric wrapper and kordshnur from polyester is used in industry. Basic mothers used in the production of belt: compound made of natural rubber, kordshnur from polyester, according to.

EFCO MZ 2090 RXS cultivator belt

Belting analogue for the cultivator EFCO MZ 2040 This wedge belt with a fabric wrapper and kordshnur from polyester is used in industry. Basic Mother Materials used in the production of belt: compound made of natural rubber, kordshnur from polyester, polyamide.

Starter assembly for repairing Motokos Oleo-Mac Sparta 25 and EFCO Stark 25. Spare parts for repairing Motokos EFCO and OLEO-MAC. The price is indicated for the purchase of goods on the Internet.store. In the retail store, differ from the price on the site. Appearance, color scheme, technically.

Starter assembly for a trimmer for grass OLEO-MAC SPARTA 25. EFCO Stark 25

Starter assembly for Motokos Oleo-Mac Sparta 25

Trimmer head for EFCO Stark 25, art. 2311 (017-0210) often also called a braid head, is a specially designed coil, inside which the cord is placed. Is an important component of a garden tool because it is responsible for properly.

Trimmer head for EFCO Stark 25, art. 2311 (017-0210) 77GRAMADION

Reducer Workshop Set for a trimmer for grass OLEO-MAC SPARTA 25. EFCO Stark 25 (4 subjects)

Trimmer head for EFCO Stark 25, art. 2311 (017-0210) 77

Piston Set for repairing the engine Motokos Oleo-Mac SPARTA 25 and EFCO Stark 25. Piston diameter 34 mm. Delivery compiles include a piston, a piston ring, a piston finger and its locking rings. Spare parts for repair Motokos OLEO-MAC and EFCO. Appearance, color.

Piston group assembly for a trimmer for grass Oleo-Mac Sparta 25. EFCO Stark 25

Trimmer head art. 2312 (017-0210) is also often called a mowing head, is a specially designed coil, inside which a cord is placed. It is an important component of the garden tool because it is responsible for the serviceable mowing of the grass. Tr.

Trimmer head for EFCO Stark 25 with an art bolt. 2312 (017-0210) 000; 1001

Piston assembly for a trimmer for grass OLEO-MAC SPARTA 25. EFCO Stark 25

Trimmer head for EFCO Stark 25 with an art bolt. 2312 (017-0210) 000

Clutch for a trimmer for grass OLEO-MAC SPARTA 25. EFCO Stark 25

Starter assembly for motorcycles EFCO Stark 25

Washing set and bolt for gearbox Motokos Oleo-Mac SPARTA 25 and EFCO Stark 25. The completeness is fully consistent with photographs of the goods. The price is indicated for the purchase of goods on the Internet.store. In the retail store, differ from the price on the site. Appearance, color.

Reducer Workshop Set for a trimmer for grass OLEO-MAC SPARTA 25. EFCO Stark 25 with bolt

Trimmer head for EFCO Stark 25, art. 2311 (017-0210) 77

A coil for a trimmer for grass 5, with a bearing. Leo reservoir. (M8x1.25, M10x1.0, M10x1.25)

Piston for a trimmer for grass assembly EFCO, Stark 37, 44

Piston for EFCO lawn mower assembly (Stark25p) diameter 34mm

Starter for a benzotrimmer 33-43 cm3 butterfly / spare parts for a trimmer for grass / spare parts for a benzotrimmer / starter for a trimmer for grass

Description Code 3933 Starter for Benzotrimmer 33-43 cm3 butterfly. Detailed characteristics General characteristics brand KIMOTO type spare parts spare parts for the starter spare parts for the starter starter assembly

Starter for a benzotrimmer 33-43 cm3 butterfly / spare parts for a trimmer for grass / spare parts for a benzotrimmer / starter for a trimmer for grass

Code 21620 ignition coil for the Patriot 3045 3055 2540 benzot. Electronic element, high.voltage wire, cap. Installed on lawn mowers, chinese gas tanks

Ignition coil for the Patriot 3045 3055 2540 / spare parts for garden technology / ignition for trimmer for grass / flywheel

Piston ring for the EFKO Lawn mowed Stark 37-44 (2 pcs.) (027-0154)

Ignition coil for Motokos Oleo-Mac Sparta 25 and EFCO Stark 25. Article Spare parts 4138-722R. Ignition for the OLEO-MAC and EFCO lawn mower. You can order goods in our store with delivery to any city and region transport companies. Payment is made.

I ignition coil for a trimmer for grass OLEO-MAC SPARTA 25. EFCO Stark 25

A semi.automatic coil for a trimmer for grass Denzel 96324 is installed on electric and gasoline braids for grass Denzel, EFCO, Makita and models of other brands with the mount M8X1.25 LH. It is equipped with an adapter, so it is suitable for trimmers and with an attachment screw.

Type: a coil with a fishing line, a cross.section of the fishing line: 4 mm, the shape of the cross.line of the fishing line: circle, landing diameter of the knife: 10 mm, knife material: plastic, bobbin in the kit

A coil for a trimmer for grass Electrolite T018V M10x1.25 (for Husqvarna)

Trimmer Electroite A002 M101,25mm, fishing line diameter. up to 4mm, left thread. Trimmer universal coil, plastic, semiautomatic

A coil for a trimmer for grass Electrolite A002 M10x1,25

1,6 mm fishing line for trimmers EFCO 8061,8092. Two nylon fishing lines are automatically lengthened if necessary, if you slightly hit your head on the ground

Accessories for lawn mowers and trimmers 180 head with a fishing line of 1.6 mm EFCO 8061,8092

Trimmer head for EFCO Stark 25 77GRAMADION

Protective casing for a benzotrimer (universal)

Clutch for trimmers, motorcycle, motorized towers with an engine 26 cubic meters.cm.

Clutch body for a trimmer for grass 26mm 9 slits (26cm3)

The lower gearbox for a trimmer for grass (lawn mower) for a rod with a diameter of 28mm, the landing part of the shaft 9.tolets, under the nut m 10 left 1.25, the planting and clamping washer of the knife, the m10 nut, the left step 1.25, the gearbox with lubricants with lubricants

Nizhny gearbox for the lawn mower (trimmer for grass) 9 slits, diameter for a bar 28 mm

Dogs of the starter N128/129/325RX, 535RX HUSQVARNA, 5038733-05

A coil for a trimmer for grass on 15-01-212, universal, light line line refueling, m10x1.25, aluminum

In the store of world engines, you can buy an EFCO Stark 25 Motokos carburetor at a favorable price. The assortment of our store presents only high.quality products of leading world manufacturers. Wholesale prices, constantly replenished assortment and individual.

Professional fishing line for a trimmer of high strength and flexibility is suitable for any type of trimmers. It is a cutting element of a trimmer for grass, and the correct choice of its thickness and shape affects the speed of the mowing and wear of the fishing line. The section of the fishing line. a circle. The thickness of the fishing line. 2 mm. The length of the fishing line.

Reducer for a trimmer for grass or motorcycles, connection of 9 teeth, pipe diameter 26 mm

EFCO Stark 25 Grass trimmer bases for a trimmer. Oleo-Mac Sparta 25

Reducer for a trimmer for grass Oleo-Mac Sparta 25. EFCO Stark 25

A knife for a trimmer for grass, Motokos EFCO 4095563R

Curved shaft with a diameter of 25 mm, connection of a square for electric trimmers, motorcycle. It is used on gas tools of various manufacturers: Greenline, Grinda, DDE, Lerua YT6910, SGT, Patriot, Champion, PROSRAB, Resanta, Iron Mole, Forward, Leader, Pit, Brait, Energy.

from 1 290 ₽ Starter assembly for a trimmer for grass OLEO-MAC SPARTA 25

from 1 199 ₽ Trimmer head for EFCO Stark 25 with an art bolt. Buy

Huter GTH fishing line is used in working with trimmers. Designed for mowing grass. The head is semi.automatic. The tails of the fishing line are displayed to the desired length by simple pressing the button located on the head, on the ground. Trimmer fishing line is made of nylon.

from 1 000 ₽ Gearpher Grimmer set for a trimmer for the grass Oleo-Mac Spar. Buy

from 3 890 ₽ Piston group assembly for a trimmer for the grass Oleo-Mac Spa. Buy

from 1,400 ₽ Carburetor for a trimmer for grass Oleo-Mac Sparta 25. EFCO. Buy

Carburetor assembly for Motokos Oleo-Mac Sparta 25 and EFCO Stark 25. Spare parts for gasoline braid for EFCO and OLEO-MAC. Appearance, color scheme, technical characteristics of the goods and completeness may differ from real ones, check the information at the time of purchase and payment.

from 1 199 ₽ Trimmer head for EFCO Stark 25, art. 2311 (01. Buy

from 1 199 ₽ Trimmer head for EFCO Stark 25 with an art bolt. Buy

from 1 199 ₽ Trimmer head for EFCO Stark 25, art. 2311 (01. Buy

from 350 ₽ EFCO Stark 25 trammer for grass trimmer. O. Buy

from 790 ₽ Piston assembly for a trimmer for grass Oleo-Mac Sparta 25

from 890 ₽ Clutch for a trimmer for grass OLEO-MAC SPARTA 25. EFCO S. Buy

Carburetor assembly for Motokos Oleo-Mac Sparta 25 and EFCO Stark 25. Spare parts for gasoline braid for EFCO and OLEO-MAC. Appearance, color scheme, technical characteristics of the goods and completeness may differ from real ones, check the information at the time of purchase and payment.

Trimmer head for EFCO Stark 25, art. 2311 (017-0210) often also called a braid head, is a specially designed coil, inside which the cord is placed. Is an important component of a garden tool because it is responsible for properly.

Clutch clutch of the lawn mower type EFCO Stark 25/OLEO-MAC SPARTA 25

Reducer Workshop Set for a trimmer for grass OLEO-MAC SPARTA 25. EFCO Stark 25

Nizhny gearbox for a benzotrimmer assembly. The number of slots. 9. Suitable for a hard shaft with a diameter of 8mm. Under the diameter of the bar 26mm. Left thread M10

Trimmer “Shark” Patriot SPDL-1307 for trimmers EFCO, OLEO-MAC. Motokos cartridge is suitable for model trimmers:. Patriot Elt-1150. EFCO 8110. Oleo-Mac TR111 A trimmer for grass with 3 plastic blades is designed for a bevel of dry grass

Removing and disassembling the starter, replacing broken parts

To repair the starter of the trimmer for the grass, you will need to disassemble it first, and then collect it. This process is not a particularly difficult occupation. For work, you will need a screwdriver with the tip of the desired shape.

Everything should be done carefully, observing safety precautions, mainly that the spring does not injure the master if an accident.

Parsing the starting node

They disassemble the launch mechanism in order to install new parts instead of broken in the following sequence:

spin a screw with a screwdriver, fixing the pulley with a starter lid;
take out a spring and antennae;
Remove carefully with the pulley (you need to unscrew the head or work, having dressed the glasses and gloves before);
determine why the launch mechanism has broken;
If the spring collapses almost completely, then it is replaced;
When the spring exits from the hook, it is installed in the original place, bending the antennae before this (the photographs show the laying process);

To change the spring, you should work carefully and accurately: it can, under the influence of the effort caused by the installation of it in place, accidentally burst. Even if you carefully remove the video, then the spring strip flies very quickly from the coil and can injure your hand with its sharp edges.

Immediately putting a springy plate in the same place does not always work. It often slips, so attempts are required to repeat until the desired result is achieved.

Starter assembly

The assembly of the starting node is carried out in a number of stages:

When making the stated manipulations, it is necessary to lay two goals. If this is not done, then the spring over time damage the plastic cup, and when it is pulled. Because of this, a feeling appears, as if the spring had flown. To eliminate such a drawback, you need to install this part of a larger length or an additional goal.

When such spare parts are absent, you can just unscrew the screw a little, and the starter knot will begin to work without shaken. But this option is temporary. it is better to repair qualitatively as quickly as possible.

Spring tension

After installing the spring, it should be pulled. The following actions are performed for this:

Remove the handle from the starter cord;
Then the rope is inserted into the coil groove;
They stretch the spring, rotating the coil in the direction opposite to the clock of the clock arrow (reviews);
make the desired number of revolutions specified in the instructions for the use of the trimmer model used and the corresponding length of the cord used;
At the very end, the rope is threaded into a hole designed for this, located in the starter cover;
put the handle in place, fixing it with a node.

If after the repair the spring continues to fly, then you can get rid of this in the following ways:

Squeeze the suitable piece of the plate into the groove at the location of the spring hook;
drill holes on two sides of the groove in the coil, into which the spring hook is inserted and fix it using a wire.

Replacing a torn cord

A torn rope is replaced in the following sequence:

The old cord is removed;
choose a suitable rope (thickness and length);
Having reached it through a special hole in the coil, a knot is tied;
Sprinkle a spring, producing the required number of revolutions;
Fix the pen.

It is better to stretch the spring plate along with the partner so that the edge of the cord does not hit the starter mechanism.

It is easy to assemble a starter on a trimmer and wound a spring, only you should do it carefully and with caution. For different models, the gas tanks of the launching mechanisms are the same, so they are repaired in a similar way. In this case, there are some nuances associated with their constructive features.

Removing and disassembling the starter, replacing broken parts

Everything should be done carefully, observing safety precautions, mainly that the spring does not injure the master if an accident.

Parsing the starting node

They disassemble the launch mechanism in order to install new parts instead of broken in the following sequence:

spin a screw with a screwdriver, fixing the pulley with a starter lid;
take out a spring and antennae;
Remove carefully with the pulley (you need to unscrew the head or work, having dressed the glasses and gloves before);
determine why the launch mechanism has broken;
If the spring collapses almost completely, then it is replaced;
When the spring exits from the hook, it is installed in the original place, bending the antennae before this (the photographs show the laying process);

Immediately putting a springy plate in the same place does not always work. It often slips, so attempts are required to repeat until the desired result is achieved.

Starter assembly

The assembly of the starting node is carried out in a number of stages:

Spring tension

After installing the spring, it should be pulled. The following actions are performed for this:

Remove the handle from the starter cord;
Then the rope is inserted into the coil groove;
They stretch the spring, rotating the coil in the direction opposite to the clock of the clock arrow (reviews);
make the desired number of revolutions specified in the instructions for the use of the trimmer model used and the corresponding length of the cord used;
At the very end, the rope is threaded into a hole designed for this, located in the starter cover;
put the handle in place, fixing it with a node.

If after the repair the spring continues to fly, then you can get rid of this in the following ways:

Squeeze the suitable piece of the plate into the groove at the location of the spring hook;
drill holes on two sides of the groove in the coil, into which the spring hook is inserted and fix it using a wire.

Replacing a torn cord

A torn rope is replaced in the following sequence:

The old cord is removed;
choose a suitable rope (thickness and length);
Having reached it through a special hole in the coil, a knot is tied;
Sprinkle a spring, producing the required number of revolutions;
Fix the pen.

It is better to stretch the spring plate along with the partner so that the edge of the cord does not hit the starter mechanism.

Labric cords for starters. 158 goods.158 goods

Hand starter assembly for portable gasoline generators Huter HT950A. Technical characteristics brand Huter Country Brand Germany Production China Type of components starter weight without packaging 0.54 kg weight in package 0.57 kg

Hand starter assembly for portable gasoline generators Huter DY2500L. DY4000L/LX

Type of spare parts: for the starter, spare parts for the starter: launch rope

Type: starter, purpose: for a benzotrimer, manufacturer of garden technology: Husqvarna, Material: Plastic, Weight: 0.20 kg

Starter cord length cord (bay) M: 30 diameter of the cord mm: 4.76 Material: nylon manufacturer. SPI

Type: spare part, type of spare part: for the starter, spare parts for the starter: launcher rope

The starter cord DDE 241-604 is used in chainsaws and lawn moutines. Designed to start engine. Made of nylon. It comes on the coil. Length. 30 m. Diameter. four.5 mm

Type: accessory, type of spare part: for the engine, for the starter, another, spare parts for the starter: launcher rope

Diame PVD00606 Starter wire VAZ 2101-07 Auto-Electro Dials PVD006-06

Type: launch wires, length: 3 m, maximum current: 250 a

Type: cord, film type: stretch-film, form of release: coil, length: 186 mm, width: 186 mm, height: 75 mm

Type: thread, length: 5000 mm, width: 4.50 mm, height: 4.50 mm

The starter cord DDE 245-213 is used in chainsaws and lawn mowers. Designed to start engine. Made of nylon. It comes on the coil. Length. 20 m. Diameter. 6 mm

Используется в двигателяхМодель09D902-2229-B110G902-0122-B110T502-3146-H110T602-0131-B131C707-0571-B1122R05-0117-H1122S07-0987-H1124T02-4174-B1124T02-6174-H1215807-3332-B109T502-0124-B1123K02-0301- E1122T02-1154-B1122T02-1158-B1122T02-1207-B109A413-0202-E1122T02-1243-B111.

The starter cord DDE 241-611 is used in chainsaws and lawn mowers. Designed to start engine. Made of nylon. It comes on the coil. Length. 30 m. Diameter. 5 mm

Use a cord to repair or assembly a full lamp. A comfortable switch is located on the wire, which has two provisions: “Inclused” and “off”. Install the product in the electrical appliance and control it with one press

Type: starter, purpose: for a trimmer for grass, manufacturer of garden technology: Huter, Material: Plastic

Type: starter cover, car model: Lada Priora, Lada 2110, Lada 2111, Lada 2112, Lada Kalina

Sources:

https://fixfix.ru/moscow/efco/
https://msk.compumir.ru/zapchasti-dlja-efco-8110
https://msk.compumir.ru/zapchasti-dlja-trimmera-efco-stark-25
https://msk.compumir.ru/zapchasti-dlja-trimmerov-efko
https://ruvestor.ru/zapchasti-k-trimmeru-efco
https://40nog.ru/zapchasti-k-trimmeru-efco
https://tehnika.expert/dlya-sada/trimmer/remont-startera.html
https://tehnika.expert/dlya-sada/trimmer/remont-startera.html
https://40nog.ru/shnury-dlya-starterov