The Candle On The Chainsaw Is Flooded: What To Do?

The engine of a high-quality chainsaw starts and runs without problems, if you provide it with regular maintenance, timely replace the filters and adjust the carburetor. But even if these requirements are met, unforeseen breakdowns sometimes occur: flood the candle or change its gap. Let’s talk in this article about the situation when pouring a candle on a chainsaw: what to do?

Characteristic.

Some time ago, the chainsaw was considered quite powerful, and at the same time expensive and heavy professional equipment used for lumbering. However, over time, manufacturers have significantly expanded the range of such equipment, releasing a variety of lightweight and compact products to work on a country site.
Today, such units, as in the following photo, are no longer exclusively professional equipment for loggers. This tool is useful in construction, during repair work, in pruning dry branches, in the preparation of firewood, and the like. But for it to work without interruption, you need to know what to do if it fills the candle on a chainsaw. Or how to repair similar equipment in case of breakdowns of its other components. We will discuss this further.

Application.

In practice, this is a tool whose main value is rather difficult to define clearly. The fact is that such equipment is universal and has a very wide scope of application. For example, it is essential during the execution of garden, construction, and other types of work.
Many gardeners and gardeners purchase lightweight models for the care of fruit trees in their country site. That is, in our day, the chainsaw has undoubtedly become a high-performance alternative to hand saw or axe. And with the peculiarities of its operation and adjustment of the spark plug gap, almost every craftsman is familiar.
But do all the owners of suburban areas know how to repair such equipment in the event of any malfunctions in its work? Let’s discuss further what to do if your chainsaw does not start and flood the candle. And also talk about why this happens.

Read more:  How to Set the Stihl 180 Chainsaw Ignition

Interruptions.

The chainsaw is no longer considered innovative technicians, designed exclusively for professionals. Nowadays, many gardeners and owners of personal plots have a similar universal unit in their arsenal. After all, modern manufacturers offer customers a wide choice of types and models of units of this kind.
Their design, in general, is not too complicated. Therefore, if problems arise with their work, any more or less experienced summer resident will figure out why he poured the candle on the chainsaw on his own.
If you provide equipment of such a plan with proper use and maintenance, candles for Stihl chainsaws become unusable rarely.

But if one day the chainsaw did not start, you need to sort out the problem in order:

  1. A spark plug for a chainsaw is an important part of this aggregate. If problems arise with it (for example, it is flooded with it), then they can lead to breakage of all the equipment;
  2. If when inspecting the candle for a chainsaw to the touch is completely dry, then this indicates a lack of fuel supply. Why is this happening? Salt problems are concentrated in the carburetor. Be sure to clean the fuel filter and turn on the engine again. Does nothing happen? Then the carburetor needs to be disassembled and examined. However, it is better to entrust this business to specialists from the service center;
  3. If the unit does not start, it may indicate a problem with a spark plug of a different nature. it fills it. Do you have a Stihl chainsaw: does it flood a candle and the engine of the unit won’t start? To fix the problem, remove the plug that has been plugged in and dry it thoroughly. At the same time, it does not need to be ignited. It is enough to drain the fuel mixture from the plug hole and leave the part to dry for half an hour. Then reinstall it in place and start the engine. Also, it is important to inspect the contact between the spark plug tip and the high-voltage wire;
  4. It is important to ensure that the spark gap of the chainsaw spark plug is properly adjusted.
Read more:  Partner Chainsaw Is Not Gaining Speed

Why problems occur?

Why flood candle on Stihl chainsaw? The answer is simple: it happens when the unit is started by an inexperienced user who does not follow the correct sequence of starting the equipment on the cold one.
Because of this, the tip of the candle can fail. To make sure that there is a similar problem, unscrew the candle and insert it into the tip. Then place the part on the unit and pull the starting cord several times. In the presence of a spark, you can not worry about the electrics and the state of the candle.
Be sure to check that the spark gap of the chainsaw is adjusted correctly.
For the chainsaw to work typically, it is necessary to carefully monitor the condition of the spark plugs, as well as ensure that the gap in the chainsaw candle is adjusted correctly. Incorrectly adjusted clearance will cause damage. Carry out regular maintenance of equipment of this kind, and problems with it will be as little as possible.

Read more:  How to Clean a Chainsaw Air Filter