Fuel adjustment on the trimmer Stihl. We diagnose a candle and candle canal

Repair of a carburetor of a Chinese lawn mower with your own hands video

lawn mowers, like the entire bench tool for the garden, is not difficult to maintain equipment. Repair, set up on your own and it is necessary. For example, adjusting the carburetor of the lawn mower with your own hands is the matter of five minutes. The carburetor from the lawn mower is a node in the power supply system. In it, like any carburetors, there is a process of mixing air and fuel (gasoline) for further supply to the motor cylinders.

In this process, the main thing is the correct proportion of fuel and air, for which the carburetor is regulated.

Adjustment of the carburetor lawn mower Stihl FS 55

Adjustment of the carburetor lawn.cutterhl fs 55

Sadservice Sadservice Sadservice Spare parts store.com.ua.

A combustible pump (its membrane) is sucked into the carburetor system. How to adjust the carburetor on you was said correctly. Adjustment of the trimmer carburetor for the STIHL FS 38 grass then passes through the fitting in the carburetor. How to adjust the carburetor of gasoline motorcycles. How to adjust the carburetor to a carburetor from a lawn mower. this is a node in the power system. Then the liquid moves through the intake and exhaust valve of the pump. Filtered with a net. On the needle valve moves into the membrane chamber.

• Air supply to the tube with an air septum (damper). The partition regulates the intensity of the air flow.
• The fuel supply system is certainly narrowed by the mixer to accelerate the flow.
• Gasoline through the float chamber and nozzle with narrowing. The chamber with a float regulates the temporary volume of gasoline. In the float chamber, the pressure level is neutral, and in the tube with narrowing is already small. Thanks to the pressure drop, fuel seeps through a jickler.
• Acceleration of the air flow contributes to the transfer of fuel (gasoline) and its spray. Ultimately, a fuel mixture of the desired proportion or density appears.
• The air-fuel mixture seeps into the cylinder of the motor through the fuel tube.

The level of air density in the system depends on the area of ​​the open air damper. The more extensive the damper is open, the greater the fuel consumption and power.

Simply put, adjusting the carburetor on a benzocos. creating a good fuel consistency due to the correct air supply.

The main problems and malfunctions of the carburetor.

Mesh filter. There are only two difficulties with this element more often:

In order to find out the cause of the breakdown, the fuel filter lid is unscrewed to extract the mesh filter. If the mud just accumulated on it, then flushing in gasoline or purge will help.

With visible damage on the mesh filter, it is necessary to put a new. There may also be damage to the fuel supply pipe (during the repair they practice checking this element).

The starting device of the carburetor in most cases does not work due to blockages. Should be used for flushing acetone or the same gasoline.

Purging parts of a carburetor with click of compressed air. permissible and comfortable repair practice.

The hull of throttles, places of ligaments of the parts of the carburetor, intake or graduation pipeline. all of the listed parts are subject to depressurization. You can probably check the simple method. spread the problem area with soap foam.

Caliber company. Brand’s base and popularization

Enterprise OJSC Caliber was founded in 1932. From the very beginning of its appearance on the market, the company aimed at the production of high.quality and inexpensive economic and industrial equipment. During the war years, the company’s plant provided production services: sharpening the tool, as well as turning, milling and heat processing of parts for Soviet weapons.

Today, in the assortment of the company you can find electric and gasoline equipment for home and garden, as well as operating machines in production. Gasoline and electric trimmers for grass are very popular among brand products. They are distinguished by high reliability, modest consumption of fuel and electricity, as well as stability during operation in severe conditions

Another important advantage is low for brand technique. The correct pricing policy of the company makes it possible to purchase its products to almost everyone

Technical characteristics of the Stihl FS38

Setting the ignition system is simple and the same on different models of trimmers, whether it be STIHL FS55, Al-KO Sun 4125 or other gasoline cutter. First you need to remove the casing from the engine, after unscrewing the fastening, which fix it. This stage of dismantling may differ in different shield.brown models (described below). Next, you need to partially unscrew the mounts fixing the magneto with a screwdriver, and turn the flywheel so that the magnets are in the upper part.

To make an optimal gap between the coil and the magnet, you must use a special template. It is impractical to buy it for one.time use, so as an alternative you can use a business card or a small calendar, as well as a sheet of A4 paper, folded in four. A strip cut from a plastic bottle or other improvised materials is also suitable, has the necessary thickness. The optimal distance is usually indicated in the user guide. The selected item should be placed between the magnets and the coil.

Then the coil will be attracted to the flywheel with a magnetic field. Holding the magneto in this position, tighten the mounts that fix it, and then pull out the business card. After that, the flywheel must be turned several times to make sure that he did not touch the coil at all. The process has ended on the ignition on the shield. The process of setting up the trimmers ignition system can be studied in more detail on the Internet, where a lot is available on this topic.

Stihl fs 38 lawn mower device

Stihl brand is distinguished by an excellent selection of components and good quality factory assembly. The basic base of the model is invested a 2-stroke gasoline engine located in the upper part of the reinforced plastic case. The internal combustion engine is equipped with a forged piston and durable cylinder, the internal and external walls of which are covered with a protective alloy of chromium, as well as nickel.

Under any weather conditions, an improved manual starter with a decompression system, an additional pump for pre.pumping fuel, as well as a proprietary electronic ignition system is responsible for the launch of the motor. This factory layout makes the launch of a cold engine more smooth and fast, preventing increased wear of its piston.

A translucent plastic reservoir designed to refuel the mower with a fuel mixture is located near the motor. The lower part of the tank is equipped with metal ribs that protect the container from damage.

The Stihl FS 38 lawn mower is equipped with a curved non.vegetable bar, which makes it possible to easily remove grass and weeds under benches, next to trees, in other inaccessible places. A flexible drive shaft is placed inside the bar, which connects to the gearbox and transfers the force created by the engine to it.

The mowing gearbox is made of aluminum covered with a chrome alloy to protect against rust and overheating. The hole in the gearbox gives the operator the ability to freely lubricate the rubbing spare parts of the node.

For more comfortable operation, the trimmer for the grass of the STIHL FS 38 is equipped with an ergonomic 2-hand-shaped handle, the position of which, if necessary, can be adjusted along the entire length of the bar. The manufacturer equipped the model with a durable fabric shoulder strap, which is attached to the bar with metal carbines.

Lawn mower Stihl FS250

A powerful Stihl FS 250 lawn mower is designed for professional use in rural and forestry. The power of the engine of the trimmer for grass is 2.2 liters.With., which makes it possible to effectively mow grass of varying severity in large territories, cut off the thickets, clear the areas from the wild shoots of young shrubs, non.weed trees. Due to its high technical characteristics, the gasoline trimmer for grass has also found widespread use in utilities.

Lawn mower Stihl FS250

Specifications

(1) without fuel, without cutting tools and protection (2) K-coefficient according to RL 2006/42/EG = 2.5 dB (A) (3) K-coefficient according to RL 2006/42/EG = 2 m/s² (4) without cutting tools

How to get a motorcycle stihl

The main stages are how to get a STIHL motorcycle:

• Before the operation of a gasoline trimmer for the grass, you should familiarize yourself with the instructions and check the trimmer for STIHL grass for each spare part. After you can collect it.
• An important step is fuel preparation and refueling. You need to prepare the mixture in a measured container. Gasoline and oil are poured into it in the indicated ratio. Using a funnel, the mixture shimmers into the fuel tank.
• At the first launch, turn on the ignition without opening the air damper. Put the device on an even and smooth surface for stability. Now. you need to sharply pull the cord from 3 to 5 times. Air damper can be opened in any case: the engine has started or not.

The first launch may require up to 15 jerks. After starting the engine, it is worth turning on idle for warming up. After a while, it is stopped by the button.

note! This instruction is universal, since in order to start the Stihl law trammer, you need to perform similar actions.

In the case of the launch of an electric trimmer for the grass, everything is much easier: you need to familiarize yourself with the instructions and act in accordance with it. Instead of fuel here electricity. The device works from the network, so it is important to provide sufficient power so that the trimmer for grass can gain speed.

After each operation, both gasoline and electric trimmer requires a thorough inspection.

Following the instructions, you can quickly eliminate any small breakdown on your own. But sometimes it is not possible to start the unit with your own hands. In this case, it is better to seek professional help, especially if this applies to the problem with the engine and the development of revolutions of the trimmer for grass or lawn mower.

Portal about construction

Adjusting carburetor gasoline can be carried out with its own hands gasoline, as well as the entire gasoline tool for the garden, it is easy to maintain in technology. Repair, setting on its own can and should. For example, adjusting the carburetor of a gasoline pump with your own hands is five minutes.

Carburetor from a gasoline machine. Node in the energy system. In it, as in any carburetors, there is a process of mixing air and fuel (gasoline) for further supply of engine cylinders.

In this process, the main thing. The correct proportion of fuel and air for which the carburetor is regulated.

Description of the model

The Stihl FS38 Lawn Mobilum. the easiest mobile version with a capacity of 0.9 liters.With., It is intended for domestic use.

• Thanks to the modern electronic ignition system, reliable starting and uninterrupted engine operation is ensured.
• Using the fuel pump, the operator has the ability, if necessary, pump up fuel into a carburetor.
• Optimal maneuverability is provided thanks to the D-shaped handle, with which it is convenient to control the Stihl motorcycle carpet when working in complex areas.
• All control levers are located on a special multifunctional handle (R), which ensures the safety and reliability of the benzotrimer operation.
• Thanks to the Autocut C5-2 mowing headset, the diameter of the mowing is 380 mm.
• The ergonomic shoulder belt allows you to hold the STIHL motorcycle cub on the shoulder, it is rational to coordinate movements during operation.
• Small mass (4.1 kg.), small dimensions, rational basic equipment. thanks to these characteristics, the Stihl 38 lawn mower is extremely comfortable in work.

Fifty.five gas mower FS

Adjustment of the carburetor of the Nymeitsky Wobber Benzosos

Nonvavadennik of gasoline mowers in robots with landscaping in terms of wear, and sometimes breakdowns of their nozzles. It is impossible to attribute the tool to the side on the side nozzles, all breakdowns are exclusively mechanical in nature, as you can fix it with your own hands. Among the vipads to complete the implementation of regulatory work in order to turn the tool into a very solid cutter. Adjustment of the carburetor (idle) repair of the carburetor of the gasoline mowls STIHL FS55 STIHL FS carburetor adjustment Fifty.five Motokos Repair of the STIHL FS 56 carburetor repair. Carburetor adjustment. One of these operations. adjusting the carburetor of a gasoline mowing manual. Carburetor installation before supply to the engine is bred by fire. Adjustment of the STIHL FS carburetor fifty.five stihl fs55 (motorcycle lawn mowing) Test Original Repair Motokos STIHL FS55 Repair of the STIHL FS 56 carburetor. Carburetor adjustment. Trimer Stihl FS diagnostics fifty.five motorcycle brush. If the proportions do not come true, in a robotic trimmer you will see animals:

The entire process of regulating the carburetor of the transmission brand is only in improving the position of three gint: l, which regulates the supply of gasoline to the braid at low speeds, h, which regulates more turns and glasses, t, which improves the idle passage. Speed. Thus, if it is necessary to install a carburetor of a gasoline mowing line of the brand of fifty.five or other types of this series with the following rank:

• Engine heated (10 needles at idle).
• Adjust Guint N, turn left / right until the maximum idle move.
• From a known point, enter in the direction opposite to the direction ¼ turn, how to establish the desired robotic position.
• Adjustment idle move The carburetor of a gasoline mower is carried out in a similar way, turning to the reverse (change of scraps) and a year later (increased speed). Reach the position of maximum rigidity of the robot engine in different positions.
• Guint L is regulated by itself, small protrusions to the maximum.

The whole process is carried out by ear, so for a more successful robot you can get a tanometer. STIHL FS Fifty.Five Carburetor adjustment The most accurate tool for the tool can be obtained in the Kosa Motors department, as well as buy oil for compressor and all the necessary spare parts and accessories for timely maintenance.

Read insert the piston into the Stihl 180 cylinder

complex reasons for the refusal of the lawn mower

If the step-by-step algorithm for searching for a malfunction has not given a result, and your braid for grass still does not start or stalls, it is worth examining the carburetor and the engine itself. A clogged carburetor can become one of the reasons, unstable operation of the tool. Three main problems can be distinguished here:

• Clogging of channels or nozzles. All this is cleaned with special flushing or blown by a powerful stream of compressed air from the compressor. Do not use needles and wire, so the passing sections can be damaged;
• Wear of the carburetor laying. Output. replacing the failed laying;
• Violation of tightness. To check this indicator, you can use the usual household tonometer, replacing the pressure gauge on it with the right. Follow the testimony: if they do not change, everything is fine, and since the pressure will begin to fall, then some part of the carburetor is faulty. Will have to find it and replace it with a new.

If everything is in order with the carburetor, then the gasoline trimmer for the grass may not be launched due to wear of the piston group. If chips, scratches or bully are found, on the piston or cylinder they should be replaced. Piston rings are subject to mandatory verification. A small rally piston when swaying the connecting rod indicates that the time has come to change the rings. This procedure is best entrusted to the specialists of the service center.

Operation Rules for Motokos STIHL FS 130

To extend the operating time of the STIHL motorcosa, its owner should adhere to a number of important rules.

• mandatory running.in before starting the operation of a trimmer for grass;
• the use of high-quality gasoline and corporate oil for 2-stroke engines;
• the use of effective oil for lubrication of the gearbox, its timely replacement;
• avoiding shock when working with a trimmer in an open territory;
• regular cleaning of the cylinder and adjusting the carburetor;
• Timely flushing or complete replacement of air and fuel filters.

Compliance with these rules reduces the risk of untimely breakdown of the mechanisms of StiHL motorcosa and gives its owner the opportunity to save on consumables of garden tools.

About the manufacturer Stihl

The history of this German brand begins in 1926. At the initial stages of its development, the company was engaged in the production and implementation of various components for washing and steam machines. It all began, like many companies, with a small production and narrow orientation, which made it possible to focus on the quality of the manufactured products.

In the early 30s, the first Stihl chainsaw was released, which is characterized by convenience and functionality in those days. The company is developing at a long time, constantly introducing new tools, which gives it the opportunity to enter the international market. And already in 1931, the first regular supplies of products were organized at the moment, the company has launched its activities in more than 160 countries of the world, opening new centers and production departments in Switzerland, China and many other states. This is understandable, because the assortment of the company is impressive: motoburs, gasoline sprayers, mowers, gasoline trimmers for grass, chainsaws and much more. I would like to note that Shtil chainsaws are very popular due to their functionality and acceptable price.

Carburetor adjustment Motokos STIHL FS 38

Immediately before the setting of the carburetor trimmer for STIHL grass, you will need to eliminate all the malfunctions of the model. Engine and other nodes of motorcycles should be completely working. It will also be necessary to clean or replace the air felt filter. To do this, you need to remove the element from its standard case, rinse it with clean gasoline and install it back in place.

The further procedure for adjusting the STIHL FS 38 carburetor is as follows:

• Initially, the full.time bolt of L, responsible for adjusting the engine speed in idle mode, will need to be turned around the clockwise direction to the stop, and then transfer it to 1.5 turns in the opposite direction;
• Then you need to start a trimmer engine for grass and give it time to warm up;
• As soon as the motor cylinder heats up, you will need to press the gas trigger several times. If, after a decrease in the number of revolutions, the spitter head with the fishing line continues to rotate, then you need to start turning the LA bolt alternately until the cutting headset stops.

After that, you should check the work of the trimmer for STIHL grass in different modes. If the tuning of the carburetor is performed correctly, then the gas mowing engine will quickly gain momentum when you press the gas trigger, and also lose them quickly when releasing it.

Features and best models

Separate mention is deserved by the Stihl desktop, which is distinguished by its own multifunctionality, reliability and ease of operation. The company’s specialists created many varieties of braids, with different features and use.

For example, the range of lawn mowers is designed to mow grass in huge places. For this, a self.propelled wheeled system was developed, with the help of which it became likely to care for a large territory, without spending a lot of time and effort on it. For the design of shrubs, giving them some artistic type and texture, the lawn mower is perfect. And if you need a lawn mower for the highest weed and uneven areas, then follow this link and receive complete information on the selection of this type of equipment.

If you need a narrower approach to grass cleaning, for example, near flower beds or between trees, then a gasoline trimmer for grass, designed to accurately and accuracy of execution, will perfectly manage this task. The company’s specialists have provided all aspects and possible difficulties when working with braids, because they provided them with nylon strings that prevent mechanical damage to trees.

Autocut special trimmer head is also used, which provides the normal functionality of the string knives. About for gasoline lawn mowers trimmers for grass, this article will say for you, it will also help you make the right purchase for you, which you will not regret.

Professors include trimmers for STIHL FS 130 and FS 250 grass. We will see the properties and characteristics on the example of several mowers, namely FS 38, FS 70 and FS 130.

Read what is the cable section for a trimmer for grass 1 kilowatts

Review

belongs to the lung group and is the best addition to a powerful lawn mower for cutting inaccessible sections, along the paths, under trees and bushes. With mobile gas strokehl, you can quickly cut soft overgrown grass on lawns and lawns, always maintaining the purity of a small area.

Trimmer for STIHL FS grass fifty.five law mowering does not develop revolutions, stalls, we sort out the carburetor

Trimmer for STIHL FS grass fifty.five Motocross does not develop speed, stalls, fingering the carburetor thanks for viewing.