Alteration of a rotary mower for a walk -behind tractor for a fishing line for a trimmer. Double -disc rotor mower

How to redo the rotary mower to a walk.behind tractor

Depending on the design features of the mowing, I am two types: rotary and segment.

Rotary

For these mechanisms, disk devices act as working elements. They are quite productive and absolutely safe during operation. Neva rotary mowing for a walk.behind tractor can lay mowed plants in even rows, due to which their subsequent drying is greatly simplified and the need for the use of foriles and rakes disappears. The unit of this type is used for mowing vegetation on the sidelines and slopes of roads, as well as to remove grass in the territories of private courtyards and estates. Rotor.type mowles can be single.disc and double.disc. Their mount to the walk.behind tractor is carried out in the front of the device. How their activities are carried out? Twisting the moment from the operating engine is transmitted to the power shaft, which in turn, through a wedge.shaped belt, interacts with the working bodies. Further, under the influence of centrifugal force, the legs of the discs are in contact with the surface of the grass and cut it off. To protect the discs from stones and solid objects, the design of the unit provides for protective covers.

Segmented

Segment.type mowals are devices that include a frame and cutting components (fingers) interconnected by special fasteners. The principle of the functioning of such an unit has similarity to the work of classic scissors: one part of the mechanism is in a stationary state, and the other makes straightforward movements. left and right. When the torque from the motor block is transmitted to the mower, then progressive vibrations of scissors and plants that fall between their fingers occur quickly and neatly cut off. Thanks to the rational form of the device, the vegetation is laid on both sides of the unit. As a result, uniform rolls are obtained, for the cleaning of which additional devices will be required, such as forks and rakes. A segmented mower for a walk.behind tractor Neva is capable of carrying out its activities in areas with a complex line of relief with mowing grain and herbal crops. The displacement of the working component of the mower in relation to the walk.behind tract can be about 20%.

What braids can be done with your own hands?

The factory motor.cultivator will cost much more. For example, even a relatively inexpensive Czech hayfield, a gasoline MF 70 costs at least 20,000, and we are talking about used. If you want to purchase a new one, feel free to increase the price by at least 60%.

2.1 how to make a rotary haymaking?

Rotor (disk) haying gasoline (manual) is perhaps a haymaking with the simplest design. You can repeat it yourself even at home, and having spent not so much time on it. Such gasoline haying senilers are used for the Neva walk.behind tractor, since they are not large enough for the tractor or other agricultural self.propelled equipment.

To make such gasoline haymaking yourself, you will need:

  • Boil or find a suitable frame from a reliable metal angle (4 × 4).
  • Take the wheels from the seeder, which has not been used for a long time.
  • Fix 4 blades on them, for which to drill the same number of holes in them (in a diameter of 0.6 cm).
  • Attach them to the disks, and make the distance between the mount and the blade 1 mm wider than the thickness of the blade itself.

The second rotary haying gasoline for the Neva walk.behind tractor will be a little more difficult and to do a little longer. Such gasoline hayfields are distinguished by a disk that straightens the knives rotating around its axis, centrifugal force. To make such a mower, you need:

  • Reliable metal axis in a diameter of about (8 mm);
  • Drinking chains (can be removed from an unnecessary chainsaw, another way is to find a gearbox in a car market).

Equip the one.axic tractor with the presented device, and you can enjoy the result obtained: the rotary haywood will not only mow, but also grind the in.iteous.

2.3 how to make a segment mower?

The segment mower for a walk.behind vocabulary is even more complex, but can also be done with your own hands. What do you need to collect gasoline segmented hayfields of this type:

  • Metal beam 15 × 50×120 mm.
  • Drill 12 diameters in it, equal to the diameter of the M8 bolt (blades will be attached to it).
  • Make sure that each blade has a segment on the back and a clip for a drive lever.
  • Fasten the knives on both sides of the beam.
  • In the end on both sides, fix the cloudy and runners.
  • Place the main frame of the wheel (for example, from the old baby stroller).

The motor block shaft will set in motion a made mechanism that will rotate the knives in a special way-not only with a rotational movement, but also in the back. Thanks to this, the stems of grass are easily cut off, however, they are not crushed, as in the case of using a rotary hayfield.

2.4 how to make a catfish?

The design of the mowing pitch (self-propelled braid) for the Neva motornote has much greater spinning force, thanks to which you can remove grass with a wide stem.

To make a reliable horse haywall, use the following recommendations:

  • Pick up a solid frame made of metal corners.
  • Find 4 wheels (you can with an unnecessary car or baby stroller).
  • Put a metal sheet on the frame with 80 × 40 sizes (you can use plywood, but you will not get such a strong design).
  • Install 2 large tin cans on the frame, having previously cut the cover and bottom from them and replacing them with two wooden circles of the corresponding size (if there are metal disks. perfectly, they can be used instead of cans, then you will get almost a factory haymaking).
  • Keep in mind that there should be 8 discs. equally external, about 20 cm with a diameter and internal, with a diameter of about 17 cm.
  • Combine all the discs in pairs (large.knit), fix with bolts.
  • Fasten 4 blades on each disk so that they are at the same distance from each other and rotate freely (this is possible if 1 mm gap remains between the disks).
  • Next, you need to insert the sleeve into the drum and securely fix it on the frame.
  • On the frame, install a transverse sheet from a steel corner of 35 × 35 mm, with cut side parts by 35 mm.
  • Connect the drums with a transport tape (it can be made of thick rubber), after supplying corners with grooves with a width of 13 mm.
  • Fasten the lower bushing bushing, and attach stretch corners to the drums on top.

In order to install the resulting design on a single.axle tractor, check that a protective casing is installed on the blades, remove the cargo from the wheels, if any. Speasing the grass using gasoline hayfields at small speeds, turning on the clutch, without making sudden movements, and the horse hackist will delight you with its functionality.

rotary, mower, walk, tractor, line, double

Self.manufacture

Surely the reader has already matured the question “but whether to make a mower to the Neva motornote with your own hands?”Well, nothing is impossible in this. Only in order to create a truly high.quality and relatively safe device at home may need months of hard work, plus tools and materials.

The main thing that needs to be made first is a strong metal frame. For this, iron corners are suitable that can be welded to each other. After that, you need to decide on the configuration of the future braid for grass and start working on the tool itself.

Variant of a homemade rotary mowing

  • Two working discs are removed from the old grain tractor seeder, and a chain and a gearbox from a chainsaw are used as a drive.
  • It is necessary to separately make blades with your own hands and, using the holes pre.drilled in the disks, fix them on the disks.
  • The knives should be mobile so that there is less risk of damage if the braid for the grass “finds” a stone or another hard obstacle in your meadow.
  • It should be noted that the discs of the braids should rotate towards each other. Otherwise even herbal rolls will not work.

As a result, something similar to this photo should be obtained.

How to make a finger mowing

  • You will need to take two metal beams up to one and a half meters long and drill a dozen holes in them for bolts.
  • The bolts between the bars will need to be fixed by the separately made rail with cutting edges.
  • This whole design should be attached to the hard frame and stayed with two guides.
  • Just like for the rotary unit, you will have to make a belt drive with pulleys and bearings.

Of course, the work is interesting for the Samodelkin, but the factory attachment equipment is almost always more profitable than its own.

If you want to choose a mower for the Neva MB 2 single tractor, study all the features of those areas on which you need to work. Universal tools, as practice shows, in this category there is no.

The most reliable criterion for choosing can only be the experience of those who themselves used such devices. In any case, the mechanization of the haymaking, especially if it is conducted in significant volumes only by one person, this is a significant plus for a personal economy.

Popular models

Domestic manufacturers produce these units in various configurations. A common braid is the one that is produced under the Zarya and Zarya 1 brand. the product of the Kaluga OJSC Kadi.

This multi.purpose model. It is distinguished by high production indicators, ease of management, ease of installation and maintenance. The mechanism of attaching the braid frame to the rotary node of the motor block is simple and universal, approaches almost all domestic cultivators.

Another model widely used by farmers is KR-80. It is suitable for operation in combination with the motoblocks “virgin lands”, “Neva”, “cascade”, “Oka”. You can mow grass, coarse shrub, cereal crops.

Similar characteristics are possessed by the rotational suspension mower KRN-1. Produced in the territory and Belarus. Installed on most leading units. It has modifications designed for industrial field processing.

Before acquiring an installed addition to the walk.behind tractor, it is necessary to find out the characteristics of their compatibility. Daewoo Daewoo Daewoo Cultivator is sometimes sold with additional nozzles from the same company. They easily combine with its leading mechanism. Cosocosers of other manufacturers may constructively differ, which will prevent or nullify the attempt to connect a walk.behind tractor with a suspended unit

When buying this or that agricultural equipment, it is worth paying attention to this issue

Rotor mower for a walk.behind tractor

Devices of this type are also called disk. Judging by the name, it becomes clear that specialized discs participate in the process of cutting grass. If you distribute these mowers according to the connection method, they are divided into those that are connected to the pulley by means of the belt and those that are directly to the UM.

The principle of operation of the unit is as follows: the discs spin on each other, which allows not only to competently download grass, but also carefully put it in a row for further cleaning and transportation. As a result of such work, you can easily and quickly collect vegetation and put it in a specially prepared place.

How Lawn Mower Blades Cut Grass (at 50,000 FRAMES PER SECOND). Smarter Every Day 196

As for the structural features, the rotary braid to the walk.behind tractor is based on a metal frame, where a supporting wheel with a cutting element is installed. During movement, the support wheel promotes the movement of knives, which carry out cutting of grass. The visual display of the device of the machine is displayed in the following drawings: as you know, different modifications of mowers can be equipped with three blades. Often, such hinges are accompanied by “skis” that contribute to the operation even on an uneven surface. Positive features include a special drum that pushes the grass, allowing you to work even with dense and thick plants. But such devices are not designed for the processing of large territories.

Homemade constructions

Given that there are several varieties of braids, we give several options for homemade structures. Let’s start with a simpler rotor option.

Rotor haymaking is used to mow high herbs. Small shoots such a model do not mow, but grinds. You will need two discs to make such a model. These will be rotors on which the cutting elements are fixed.

Homemade mowing equipment for a walk.behind tractor

For rotors, it is better to use hardened metal disks. Four knives are installed on each rotor. Keep in mind that the knives should rotate around its axis 360 degrees. Therefore, calculate the ratio of fasteners in the rotor and the length of the cutting elements.

Knives are attached to the discs by means of shinka. The distance from the plane of the knife to Shinka should be slightly larger than the thickness of the cutting element. This scheme will provide knives with free rotation due to centrifugal force, and prevent mechanical damage to the elements in a collision with a solid subject.

Rotors are attached to shafts made of high.carbon steel. The shafts themselves are installed on the welded frame, and are aggregated to the walk.behind tractor by means of a power selection shaft. Keep in mind that the rotors should rotate to meet one another, this will allow you to form a bracket in the rolls.

Homemade segment mowing is made somewhat more complicated. You will need a metal bar, about 120 centimeters long. Here, at equal distances, you need to drill holes for fasteners.

By means of threaded connections, a guide rail (length 90 cm) and knives are installed. The cutting elements are installed in two.sided, on both sides of the bar. Powers and fixators are installed on the basis. The braid operates from the engine of the walk.behind tractor, the force is transmitted through the power shaft.

Please note that mowers, homemade or factory ones need to be able to connect to the walk.behind tractor. This is done like this:

  • The same.based tractor switches to reverse mode.
  • Before connecting the selection shaft, the docking unit is installed in the clutch connector.
  • After installing VOM, the clutch is fixed with a shkworm equipped. Keep in mind that the presence of a spring must not withstand the loads otherwise.

Please note that the wheel pairs of motoblocks have weighting elements that provide reliable adhesion when cultivating land. Speasing the grass, cargo can be removed, this will remove the load from the engine, accordingly the performance will increase

Keep in mind that in the manufacture of a rotary mower you need to install protective covers

Speasing the grass, cargo can be removed, this will remove the load from the engine, accordingly the performance will increase. Keep in mind that in the manufacture of a rotary mower you need to install protective covers.

Installation of a mower on a single tractor

Proper manufacture of a mower for a walk.behind tractor is not all, it needs to be connected to a walk.behind tractor. Assembly Guide:

  • Activate “reverse”.
  • Any manipulations of the installation are made to WOM, transferring the knot into a fastening nest.
  • Fix the connection using the pitch with the spring. The absence of a spring can lead to a breakdown.
  • Cover the knives while working.
  • Remove the goods from the wheel of the motor block (are needed to work with the soil).
  • Speasing occurs at small speeds.
  • The maneuvers should be smooth.

Regardless of the type of mowing on a single tractor made by yourself, you need to ensure that everything is securely fixed and installed. Security is very important.

A braid is a type of attachment designed to mow weeds and bushes of grown tuber cultures immediately before assembling them. The practical use of a mower for a walk.behind tractor allows you to get rid of excess vegetation of almost any height and thickness, saving, while the time and strength of the farmer.

Rotor mowers

Street braids are divided into two types: rotary and segment. The former are a strong supporting frame, at the bottom of which two or three cutting discs are fixed, and on the sides-slingsmen to adjust the height of the bevel and promote the device on the ground. The main advantage of rotary models is that they practically do not require technical knowledge for operation and maintenance. at least, unlike segmented mowers. For the Neva motornote, the most common in our country is the rotary mower “Dawn”.

rotary, mower, walk, tractor, line, double

Please note that today its production is engaged not only in but also in China. The assembly quality does not differ much, experienced users note only one significant difference. the gearbox of foreign devices before use it is advisable to disassemble and smash well, because the standard amount of oil in some conditions is not enough

Zarya weighs about 32 kilograms and rolls about 0.2 hectares of grass per hour of work. Tunable bevel width. up to 1 meter. Passage width. 80 centimeters.

Tool and materials

Unfortunately, most owners of motoblocks and ministers do not always use them in full, and in order to mow the lawn or the field they hire another equipment. Although, it is quite possible to do this with a rotary mower. The cost of such a tool is prohibitively high, therefore it is much more profitable to build it yourself. About how to make a rotary mower from improvised means we will consider further.

How to make a mower for a walk.behind tractor with your own hands?

It often happens that for some reason the manufacturer does not have a special mower on sale, specifically for this model, or that it does not suit her characteristics. In this case, it is easy to work on a homemade option. Full production on the basis of its economy will be demonstrated by the example of segment variation.

From spare parts, first of all, you need to take a rectangular pipe 5×1.5 120 cm long. An ordinary piece of old braids for grass is also suitable. About 12 holes are drilled on the pipe along the same distances, as drawings are shown.

You should prepare a frame from cooked corners and pipes, the frame can be covered with plywood and attached wheels to it. The tape is made by rubber ring.shaped. It is convenient to fix it with duralumin plates. Shrings are also welded on the frame to install the cutting strip. For the latter, a strip with metal blades is attached to a pipe prepared in advance with holes in advance.

Homemade constructions

Given that there are several varieties of braids, we give several options for homemade structures. Let’s start with a simpler rotor option.

Rotor haymaking is used to mow high herbs. Small shoots such a model do not mow, but grinds. You will need two discs to make such a model. These will be rotors on which the cutting elements are fixed.

Homemade mowing equipment for a walk.behind tractor

For rotors, it is better to use hardened metal disks. Four knives are installed on each rotor. Keep in mind that the knives should rotate around its axis 360 degrees. Therefore, calculate the ratio of fasteners in the rotor and the length of the cutting elements.

Knives are attached to the discs by means of shinka. The distance from the plane of the knife to Shinka should be slightly larger than the thickness of the cutting element. This scheme will provide knives with free rotation due to centrifugal force, and prevent mechanical damage to the elements in a collision with a solid subject.

Rotors are attached to shafts made of high.carbon steel. The shafts themselves are installed on the welded frame, and are aggregated to the walk.behind tractor by means of a power selection shaft. Keep in mind that the rotors should rotate to meet one another, this will allow you to form a bracket in the rolls.

Homemade segment mowing is made somewhat more complicated. You will need a metal bar, about 120 centimeters long. Here, at equal distances, you need to drill holes for fasteners.

By means of threaded connections, a guide rail (length 90 cm) and knives are installed. The cutting elements are installed in two.sided, on both sides of the bar. Powers and fixators are installed on the basis. The braid operates from the engine of the walk.behind tractor, the force is transmitted through the power shaft.

This Is An Amazing Crazy Powerful Tool For High Grass That You Need To Own!

Please note that mowers, homemade or factory ones need to be able to connect to the walk.behind tractor. This is done like this:

  • The same.based tractor switches to reverse mode.
  • Before connecting the selection shaft, the docking unit is installed in the clutch connector.
  • After installing VOM, the clutch is fixed with a shkworm equipped. Keep in mind that the presence of a spring must not withstand the loads otherwise.

Please note that the wheel pairs of motoblocks have weighting elements that provide reliable adhesion when cultivating land. Speasing the grass, cargo can be removed, this will remove the load from the engine, accordingly the performance will increase

Keep in mind that in the manufacture of a rotary mower you need to install protective covers

Speasing the grass, cargo can be removed, this will remove the load from the engine, accordingly the performance will increase. Keep in mind that in the manufacture of a rotary mower you need to install protective covers.

Characteristics

A walklet for a walk.behind tractor is a mechanized device connected to the unit selection shaft using a craft transmission. The device is easy to use, easily mounted on a single tractor, quite repaired, has no problems with spare parts and does not require special service. In addition, the mower is convenient during transportation and does not take up much space when stored. Thanks to the thoughtful design and the absence of complex nodes and assemblies, the device rarely breaks and is distinguished by a long service life.

Despite the fact that the mower is a device of a narrow profile, its use is quite wide. The device is used for mowing weeds, removing the tops of beets and potatoes before harvesting the root crops themselves, as well as for harvesting feed for cattle and aligning the lawn in the yard or on the site. In addition, with the help of a mowing, you can remove the cereals, cut off a small shrub and cultivate a plot that is strongly overgrown with storm.

In the modern market of small agricultural machinery, the mowing is presented in a wide range. This greatly facilitates the choice of the right model and allows you to purchase both an expensive multifunctional device and completely simple budget specimens At the same time, a used unit can be bought for only 6-8 thousand. For more serious samples of new equipment, you will have to lay out about 20 thousand, and when buying the same model, but with a small developing. about 10-12 thousand. In any case, the purchase of even a new model will cost much cheaper than the cost of a popular Czech mower “MF-70”,

Pitch-brewery

This type of mowal can be used in the summer for mowing grass, and in winter. for cleaning from the snow of sidewalks. This model has a rather complicated design. It has a pair of drums that are connected by a frame and a transport ribbon on which there are special hooks.

Pipes are welded for the bed. Then the wheels and plywood are installed on it, instead you can use tin. The braid has a size of 800×400 mm.

You can use large-diameter canned cans as drums. You need to cut both bottoms. Instead wooden circles are installed. Install the drums and fix the cutting surfaces four pieces per each on the bottom.

When installing them, you need to leave a gap of 1 mm, for free rotation. Then install the collected drums on the bed. Between themselves, they need to be connected by a transport tape, which can be made from a piece of rubber.

Competent installation of a mower on a single tractor

The newly acquired product must be correctly installed on the equipment to provide the desired performance and quality of execution. Consider the approximate procedure for assembly and installation on the example of the rotary version:

  • We check the supply package (from the model to the model, the set may differ, but, as a rule, it is a drive belt, frame, fitting, fasteners, rotor cover, hydraulic shuttle, supporting slopes, hydraulic cylinder, a drive belt tension system, rotors with knives, SIPs);

We mount the frame to the mounts of the walk.behind tractor so that it makes up with a vertical plane of 45 degrees and so that the slotted details look up;

We install the rotors on the frame so that their knives are located below. It is important that they are completely planted on a slot;

We attach the rotary cover to the same slot;

We fixed with the attached shplints and nuts;

We mount the tension system, pulling out the shoplint and unscrewing the counter.hack on the pulley. The next step, carefully knock out the pulley so that the key does not get lost. With a properly installed system, its handle will be directed up and fixed with bolts from SIPs;

Next, on the frame, we fix the slide with bolts from SIP so that their concave part looks inside;

We draw the rifs of the frame. they should be located outside the frame of the walk.behind. After that, we finally connect to the second mower;

We throw a drive belt on the pulley in the direction of movement. It is important that the one.axle tractor and mowing remain aligned;

We mount the hydraulic cylinder system. hydraulic shows (if the connection is provided on the walk.behind tractor).

At the end of the assembly, the product must be prepared for work:

  • Activate a reverse on motor vehicles;
  • remove cargo from the wheels (if there were);
  • put the motor for small speeds;
  • make a test launch on an even area without interference, checking the quality of the result and, if necessary, adjusting the knives and speed.

Homemade constructions

Given that there are several varieties of braids, we give several options for homemade structures. Let’s start with a simpler rotor option.

Rotor haymaking is used to mow high herbs. Small shoots such a model do not mow, but grinds. You will need two discs to make such a model. These will be rotors on which the cutting elements are fixed.

Homemade mowing equipment for a walk.behind tractor

For rotors, it is better to use hardened metal disks. Four knives are installed on each rotor. Keep in mind that the knives should rotate around its axis 360 degrees. Therefore, calculate the ratio of fasteners in the rotor and the length of the cutting elements.

Knives are attached to the discs by means of shinka. The distance from the plane of the knife to Shinka should be slightly larger than the thickness of the cutting element. This scheme will provide knives with free rotation due to centrifugal force, and prevent mechanical damage to the elements in a collision with a solid subject.

Rotors are attached to shafts made of high.carbon steel. The shafts themselves are installed on the welded frame, and are aggregated to the walk.behind tractor by means of a power selection shaft. Keep in mind that the rotors should rotate to meet one another, this will allow you to form a bracket in the rolls.

Homemade segment mowing is made somewhat more complicated. You will need a metal bar, about 120 centimeters long. Here, at equal distances, you need to drill holes for fasteners.

By means of threaded connections, a guide rail (length 90 cm) and knives are installed. The cutting elements are installed in two.sided, on both sides of the bar. Powers and fixators are installed on the basis. The braid operates from the engine of the walk.behind tractor, the force is transmitted through the power shaft.

Please note that mowers, homemade or factory ones need to be able to connect to the walk.behind tractor. This is done like this:

  • The same.based tractor switches to reverse mode.
  • Before connecting the selection shaft, the docking unit is installed in the clutch connector.
  • After installing VOM, the clutch is fixed with a shkworm equipped. Keep in mind that the presence of a spring must not withstand the loads otherwise.

Please note that the wheel pairs of motoblocks have weighting elements that provide reliable adhesion when cultivating land. Speasing the grass, cargo can be removed, this will remove the load from the engine, accordingly the performance will increase

Keep in mind that in the manufacture of a rotary mower you need to install protective covers

Speasing the grass, cargo can be removed, this will remove the load from the engine, accordingly the performance will increase. Keep in mind that in the manufacture of a rotary mower you need to install protective covers.

How to adjust?

Devices operating from a power selection shaft are unregulated, therefore, to change some parameter, they have to be seriously remade. The exception is mowers similar to mobiles to KM-0.5, in them you can adjust the height of the mowing, lowering or raising the wheels with the help of screws.

Most of the parameters of the devices operating from the shom are also unchanged, so only the belt tension mechanism has to be adjusted. Sometimes, after a collision with a stone, one of the disks turns on the shaft, which is why his knives collide with the knives of the second disk.

If this happened, do the following:

Correct connection of the mower

Subject to all recommendations, you can create a technique that, by neither in its life, or in terms of performance of the work required from it, will not be inferior to a single acquired model.

DIY pitch

In order to collect a mower of this type, the following materials will be required:

  • metal corners for assembling the frame;
  • four wheels (the larger diameter they will, the less damage to the lawn will cause);
  • sheet (metal or plywood) 80 × 40;
  • Two tin banks (ceremonial);
  • 8 metal disks;
  • 4 knife;
  • sleeve;
  • drum;
  • transport tape;
  • Fasteners.

The set of tools will be required the same as to assemble other types of mowers. Next, you need to perform the following actions: