Total Tools. Low Price Guarantee Policy (Terms Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms Conditions – see below for details]
At times have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply visit a Total Tools Store or contact our online team with evidence of a cheaper price (print out or website link). We will verify the price, and then immediately match any current advertised price (Terms Conditions apply).
Terms Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Products distributed by unauthorised dealers / parallel importers
- Special event, club or membership offers, third party promotions or not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/priceguarantee. For the most effiicent response please use the contact us page, or alternatively email onlinesupport@totaltools.com.au.
GET TO WORK NOW, PAY LATER Click to see your options
Love tools? Start earning points to redeem rewards on your next purchase Log in or Sign Up to redeem today!
Pickup In Store
If you don’t want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You’ll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under 99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we’ll give you a refund (excluding delivery costs). You can read our full returns exchanges policy here (special order items are excluded from this returns policy).
Total Tools. Low Price Guarantee Policy (Terms Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms Conditions – see below for details]
At times have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply fill in price match form available on every product page or visit a Total Tools Store. We will verify the price, and then immediately match any current advertised price (Terms Conditions apply).
Terms Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Special event, club or membership offers, third party promotions or not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/price-match-guarantee. Alternatively, contact onlinesupport@totaltools.com.au.
Redemption Offer
Purchase a GREENWORKS 6 x 8.0Ah 42 Ride on Mower Zero Turn and receive a FREE GREENWORKS Tipper Cart Poly via GREENWORKS Redemption. Offer valid from 1st July. 30th September 2023. Redeem by 14th October 2023.
GREENWORKS 42 Zero Turn Mower
Whether you’re a keen domestic gardener, land owner or small commercial operator, the GREENWORKS® 42” zero turn mower is perfect for you.
With the ability to manoeuvre on the spot, you’ll be able to navigate your way around garden obstacles, such as shrubs, trees and garden beds with ease. The 42” zero turn has a top speed of 12km p/h allowing you to work effectively and efficiently. Features such as the high back seat, foot rests and ergonomic levers, elevates mowing to a whole new level!
The unit is powered by six (6) state of the art, removable 60V 8.0Ah lithium batteries, giving you the ability to mow up to two (2) acres and charges in 60 minutes with the aid of three (3) 10A dual port chargers. all included! The batteries are also fully compatible with the entire GREENWORKS 60V range.
Powered by innovation, not by petrol.
- Cutting Deck: 42 inch
- Forward Speed: 12.0 km/h
- Reverse Speed: 4.8km/h
- National Service Network: Yes
- Replaceable Batteries: Yes
- Min. Cutting Height: 1.5 inch
- Max Cutting Height: 4.5 inch
- Runtime: Up to 2 Acres (with 6 x 8.0Ah batteries)
- Charging Time: 60 minutes (with 3 x 10A dual port chargers)
- Connectivity: 4G/App connected
- Compatible with full 60v Range: Yes
GREENWORKS 60V Dual Port Battery Charger 2941207AU
Specifications
| 7400807AU |
| 6952909075945 |
| Cordless |
| 6×8.0Ah |
| 8.0Ah |
| Lithium-Ion |
| Greenworks |
| 3 year warranty on unit and charger, 2 year warranty on battery. 1 year commercial warranty on unit, charger and battery. |
| 2140 |
| 1250 |
| 850 |
Pickup In Store
If you don’t want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You’ll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under 99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Greenworks Electric 60V CROSSOVERZ Zero Turn Mower delivered & unpacked!
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we’ll give you a refund (excluding delivery costs). You can read our full returns exchanges policy here (special order items are excluded from this returns policy).
Greenworks 60V 42in Zero Turn Mower
Whether you’re a keen domestic gardener, land owner or small commercial operator, the GREENWORKS® 42” zero turn mower is perfect for you.
With the ability to manoeuvre on the spot, you’ll be able to navigate your way around garden obstacles, such as shrubs, trees and garden beds with ease. The 42” zero turn has a top speed of 12km p/h allowing you to work effectively and efficiently. Features such as the high back seat, foot rests and ergonomic levers, elevates mowing to a whole new level!
The unit is powered by six (6) state of the art, removable 60V 8.0Ah lithium batteries, giving you the ability to mow up to two (2) acres and charges in 60 minutes with the aid of three (3) 10A dual port chargers. all included! The batteries are also fully compatible with the entire GREENWORKS 60V range.
Powered by innovation, not by petrol.
Please click BUY NOW to purchase online! Please call us on 03 9794 8339 for a personalised freight quote if you would like delivery.
This product is offered at a SPECIAL WEBSITE PRICE, which may be lower than the price advertised in store. From time to time the website advertised price will differ from the in store price. This practise allows us to monitor our online marketing campaigns. To take advantage of this great low price please remember to mention the online advertised price when in store at the time of purchase.
- Voltage 60V
- Cutting Deck 42 inch
- Length 67 inch
- Height 46 inch
- Width (with side discharge) 53 inch
- Forward Speed 12.0 km/h
- Reverse Speed 4.8km/h
- National Service Network Yes
- Replaceable Batteries Yes
- Min. Cutting Height 1.5 inch
- Max Cutting Height 4.5 inch
- Runtime Up to 2 Acres (with 6 x 8.0Ah batteries)
- Charging Time 60 minutes (with 3 x 10A dual port chargers)
- Connectivity 4G/App connected
- Compatible with full 60v Range Yes
Visit One of Our SEVEN Superstores
Would you like to view or take a test drive of our extensive range in person? Then visit us at one of our 7 Superstore locations where a team member can run you through everything and help you find the perfect product to suit your needs.
Buy Online
All of our products can now be purchased through our website. You will currently see a BUY NOW option on most of our products. When you click this button you will continue to the purchase page where you can quickly and effortlessly complete your order with us (it is a very quick process). All online purchases offer free store pick up from any of our 7 RedShed Superstores.
Selected products also offer a flat rate shipping fee. When available, this option is clearly marked on the product pages. Alternatively, please call us on 03 9794 8339 if you would like a personalised delivery/ freight quote.
Important Information for Deliveries. If no one is home at the time of delivery then your order will be left at the front door. If you would like your order to be left elsewhere please add a note using the purchase page ‘order notes’ section. The RedShed uses Delivery Agents to deliver your goods. You agree that your details, including your Delivery Address, phone number and email address, will be supplied to the Delivery Agent for the purpose of delivering your Goods.
If a product you wish to purchase online does not yet have the BUY NOW option please either call us on 03 9794 8339 or email: marketing@theredshed.com.au and we will activate this product for you.
Please click to read our terms of use. privacy and delivery policies.
Email Us
Know what you’re after and want a quick sales process? Then you can email us your order and we will contact you straight away! Or, as you are looking through each of our products in detail you will also notice there is a quick enquiry form you can fill out.
Call Us
In the market for a particular product but would like a little more help? Then give your local store a call and a member of our expert sales team will point you in the right direction.
to get advice and be transferred to your closest store.
Greenworks 60v zero turn
Greenworks 60V 42 Zero Turn Mower 6×8.0ah Set 7400807AU
Improve your cash flow by paying off your fleet of tools over 36 months.
Enjoy peace of mind with theft protection by Toolguard for the duration of your fleet plan.
Get exclusive discounts on our entire workwear range, including brands like Steel Blue, Bisley and more.
Have a question about this product?
Notify me when back in stock
Free Toolguard 6 Month Theft Protection Automatically Included
Covers you for theft of products listed on the policy from
- Locked vehicles or premises
- Equipment securely attached to a vehicle with locks or padlocks
Please note that terms and conditions apply to theft claims, including an excess fee of 10% of the retail value of the product or 150, whichever is lower.
The Compact Ride On Mower That Packs A Punch! 60V Greenworks Crossover T
If you ever need to make a claim, our team is on the job to get things sorted and have you back in business fast.
The future is here with the versatile, easy to operate GREENWORKS 42 zero turn mower, a perfect option if you’re looking to maintain a larger lawn. This unit is powered by six state of the art, removable 60V 8.0Ah lithium batteries and charges in 60 minutes with the aid of three 10A dual port chargers. all included.
Features:
- The future is here with the GREENWORKS 42 zero turn mower, fully compatible with Greenworks whole 60V range.
- This unit is powered by six state of the art 60V 8.0Ah batteries, and charges in 60 minutes with the aid of the three 10A dual port charges. all included.
- With a top speed of 12 km per hour and the ability to cut up to 2 acres, the Greenworks ZTR will get the job done without the hassle of petrol.
- Drop the decibels and emissions to levels that keep everyone happy!
Specifications:
| SKU | 7400807AU |
| Barcode # | 6952909075945 |
| Brand | Greenworks |
| Shipping Weight | 295.0000kg |
| Shipping Width | 1.250m |
| Shipping Height | 0.855m |
| Shipping Length | 2.140m |
| Shipping Cubic | 2.287125000m3 |
| Assembled Length | 2.140m |
| Assembled Height | 0.850m |
| Assembled Width | 1.250m |
| Type | tools |
| Amp Hours | 8.0 |
| Battery Included | 6×8.0Ah |
| Power Source | Cordless |
| Warranty | 3 year warranty on unit and charger, 2 year warranty on battery. 1 year commercial warranty on unit, charger and battery. |
| Battery Technology | Lithium-Ion |
Be The First To Review This Product!
Help other tools.com users shop smarter by writing reviews for products you have purchased.
Here’s more from the same category
BECOME A tools.com VIP
Latest news, product releases and exclusive deals
Copyright © 2023 TOOLS.COM PTY LTD ABN: 98 602 925 315
Terms Conditions
Welcome to tools.com, If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern tools.com’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘tools.com’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 134 Wellingon Pde, East Melbourne. Our ABN is 98 602 925 315. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
- The content of the pages of this website is for your general information and use only. It is subject to change without notice.
- Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
- Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
- This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
- All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
- Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
- From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
- Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.
Privacy Policy
tools.com is committed to following best practices in protecting your personal privacy. We hope the following statement outlines clearly how we collect, use and protect the personal information which you provide to us.
Collecting your information
We will only collect information about you with your consent. When you browse our website, you do so anonymously. We do not collect information about you or your email address without your consent. We do not use cookies to collect information about how you use our site.
Information collected for Statistical Purposes
When you look at the tools.com website, we may record the following information for statistical purposes:. your ISP address. your top level domain name (for example.com.gov.au.uk etc). the pages you accessed and documents downloaded. the previous site you have visited. the type of browser you are using
Using your personal information
Unless required to do otherwise by law, we only collect your information in order to provide you with the information and services which you request. We will only send further information to you in the future if it is explicitly requested. We will provide you with the opportunity to unsubscribe from any future electronic communication.
Disclosing your personal information
We will not disclose your personal information to any individual, company or organisation (except as required by law). We do not share email or address information with other businesses or organisations.
Access to your personal information
We believe you have a right to know about what information organisations have about you. If you wish to access a copy of the personal information about you held by tools.com, please contact us at contact@tools.com
tools.com provides links to websites outside of this site. These linked sites are not under the control of tools.com, and we are not responsible for the conduct of companies or organisations linked to our website. Before disclosing your personal information on any other website, we advise you to examine the Terms and Conditions of those websites.
If you have any particular, unusual or sensitive enquiries with regard to privacy matters, email our Privacy Officer at contact@tools.com
User Manual Greenworks CRZ426 Pro 60V 42 Electric CrossoverZ Zero Turn Lawn Mower
Greenworks CRZ426 Pro 60V 42 Electric CrossoverZ Zero Turn Lawn Mower. Use Manual. Use Guide PDF. Documents: Go to donwload!
- Owner’s manual. (English, French, Spanish)
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
DESCRIPTION
PURPOSE
This machine is used for domestic lawn mowing. The cutting blade should be parallel to the ground. All four wheels must touch the ground while mowing.
OVERVIEW
Seat adjustment lever 2. Side discharge chute 3. Control panel 4. Deck height adjustment lever 5. Steer control lever 6. Anti-scalp wheels 7. Front wheels 8. Rear wheels 9. USB port 10. Cup holder 11. ETO socket (2 X 2) 12. Headlight
KNOW YOUR MACHINE
INSTALL THE ROLL OVER PROTECTION STRUCTURE (ROPS)
- Lift one steering lever to align the holes in the steering lever with the holes in the corresponding mounting pole. Select the preferred steering-lever operating height, and then use the wrench (1316mm) to secure the steering lever as indicated below.
- Assemble the other steering lever and in the same way
CAUTION: Do not install the upper handle reversely.
STEERING CONTROL LEVERS
The two levers control the mower’s speed, direction, stopping, neutral lock, and parking brake. Levers are used to steer, accelerate, decelerate, stop, and change direction. When the control levers are in the park brake position, the mower will not move.
ANTI-SCALP WHEELS
Anti-scalp wheel kits are standard on Greenworks Commercial units. These anti-scalp wheels (23) are designed to minimize scalping when mowing on rough, uneven terrain. After setting the cutting height, adjust the anti-scalp wheels so they extend below the deck but do not contact the ground. They should always be at least 1/4 to 3/4 below the deck. With the unit sitting on a flat level surface, the wheel position can be adjusted up or down as needed from 3/4 to 1-3/4 below the blade surface. Move the wheels up or down. using the different axle mount holes in the wheel mount bracket (if applicable on model).
NEUTRAL BYPASS KNOB
- Pull the neutral bypass knobs outwards and then downwards to unlock the wheel.
- Move the neutral bypass knobs back into position to lock the wheels.
INSTALL THE SEAT
- Place the seat assembly over the mounting brackets and align holes as shown.
- Connect the seat plug to the machine. 10 EN English
- Install the washers and nuts and tighten securely.
- Attach the sleeve to the nut.
- Make sure it is securely seated.
INSTALL THE ACCESSORIES
INSTALL THE MULCH COVER
The mower is configured for side discharge when shipped. If mulching is desired:
- Place the mulch cover on the tab on the mower housing.
- Align the holes in the mulch cover and the holes in the mower housing.
- Install and tighten the bolts, screws, fixation clamps and bearing ring as shown.
OPERATION
ADJUST THE SEAT
Push steer control levers outward into PARK BRAKE position before you adjust the seat.
- Sit down on seat and lift the seat adjustment lever.
- While holding the lever, slide the seat to the desired position.
- Release the lever and make sure the seat is locked in position before operating the mower.
ADJUST THE DECK CUTTING HEIGHT
Before using the mower, raise the deck height to the cutting position best suited for your lawn.
Deck height is adjustable from 1.5-4.5 inches. Deck should be raised while mowing is in progress to avoid stumps, rocks or other obstacle that can be damage mower deck.
- Stop the mower and disengage blades.
- Turn key to OFF position and set the parking brake.
- To raise the cutting deck, grasp the deck height adjustment lever, push left to disengage from slot, move toward the back of the mower, then push right into slot to secure.
- To lower the cutting deck, grasp the deck height adjustment lever, push left to disengage from slot, move toward the front of the mower, then push right into slot to secure.
CAUTION: Hold the deck height adjustment lever firmly when setting the deck height and only release when it is secure in the desired slot. Quickly letting go of the lever may create a pinching or pulling hazard to the operator’s hand.
ADJUST THE STEERING CONTROL LEVER
The steering control levers (2) can be adjusted for operator comfort. By loosening the cap screws (2-1) that attaches the upper control lever (2-2) to the lower lever (2-3), the upper control lever can be pivoted to fit the operator’s personal preference. The steering control levers should be adjusted so that they align with each other when in the neutral position.
INSTALL THE BATTERY PACK
To verify mower batteries are fully charged, check the battery level indicator. See the battery manual for more details.
- Lift the seat panel.
- Lift the battery compartment cover.
- Install the battery pack into the battery compartment.
BEFORE OPERATING THE MACHINE
- Ensure work area is clear of children, bystanders, and pets.
- Clear the work area of objects that may be thrown by the mower blades.
- Check brake operation.
- Check tire pressure.
- Check for loose fasteners.
- Check to make sure all guards are in place and working properly.
- Clean debris from mower.
- Test safety interlock system.
- Adjust seat to desired position.
- Verify battery charge level.
SAFETY START INTERLOCK SYSTEM
The machine is equipped with a safety start interlock system consisting of the park brake switches, seat switch, and deck blades ON and OFF switch.
The mower’s safety start interlock system is also designed to protect the operator and others from accidental injury due to unintentional traction drive system starting.
Check mower safety start interlock system daily, prior to operation. This system is an important mower safety feature. It should be repaired immediately if it malfunctions. The machine incorporates a separate seat switch which will stop the drive system and deck motors when the operator is unseated for any reason while the mower is operating. This is a safety feature designed to prevent runaway or accidental entanglement.
The safety interlock system must not be disconnected or bypassed. Doing so could cause the machine to operate unexpectedly, resulting in personal injury.
To inspect the system:
The operator must be on the seat when testing the seat switch.
Turn the key to start the machine.
Pull the steering control levers to the parking slots.
Pull up on the PTO switch to engage the motor.
Slowly raise off of the seat. The deck blade system should stop.
If the deck blade system fails to stop when the operator is off of the seat and if the cause cannot be determined, contact your Greenworks dealer immediately.
START THE MACHINE
- Raise the mower deck to its highest position.
- Insert start key and turn to start position (d). NOTE: The buzzer alarms for one time, the machine is READY TO GO, then you can drive the machine even without blade working.
- Release the parking brake NOTE: The key will return back to (c) position automatically. Wait for 4 seconds until the display shows normally.
- Place steering control levers in forward (F) position and drive to desired mowing location.
NOTE: Turn the headlight on by turning the key to the postion (b) when you power on the machine.
NOTE: Do not attempt to change the direction of operation while the mower is in motion. Always come to a complete stop before changing the mower direction.
STOP THE MACHINE
DANGER: Never make sudden stops or reverse direction, especially when maneuvering on a slope. The steering is designed for sensitive response. Rapid movement of the steering control levers in either direction could result in a reaction of the machine that can cause serious injury.
- Return drive control levers to the Neutral position. Push drive control levers outward into park brake position.
- Push down on the PTO switch to turn blades off.
- Turn the key to OFF position (a).
USE THE USB PORT
The USB charging port provides charging power of 5 Volts DC at up to 2.1 amps for your cell phone, MP3 player, or other USB devices. Consult the owner’s manual for your device for specific charging requirements.
Connect one end of a USB cable (not provided) to your device and the other end to the USB charging port on the mower, to begin charging your device.
NOTE: Attempting to charge devices rated more than 2.1 amps could damage the USB charging port and/or the mower.
NOTE: The USB port is only powered when the machine starts.
Never use headphones or any electronic device, such as a Smart phone or tablet, while operating the mower. Distracted operation can result in an accident that could result in death or serious personal injury to the operator or a bystander.
ELECTRIC TAKE OFF (ETO) SOCKET FOR CONNECTING ACCESSORIES
The machine can be used together with other attachments such as the blower.
OPERATION SUGGESTIONS
DANGER: Prior to operation, the operator should be thoroughly familiar with the proper use and operation of the equipment, should read the manual completely and thoroughly, and should have attempted slow moving maneuvers to become familiar with the operation of the equipment before attempting normal speed operation. An inexperienced operator should not mow on slopes or on uneven terrain.
Inexperienced operators may have a tendency to oversteer and lose control. Slow-moving practice maneuvers are recommended to become familiar with these characteristics before attempting normal-speed operation.
When turning on soft or wet turf, keep both wheels rolling either forward or backward. Pivoting on one stopped wheel can damage turf. Keep blades sharp. Many problems with incorrect cutting patterns are due to dull blades or blades which have been sharpened incorrectly. Blade sharpness should be checked daily.
DANGER: Never work with blades while key is in the ignition switch. Always place deck blade switch in the disengaged position, place steering control levers in the park brake position and turn key to the OFF position and remove key from switch. Block up mower when you must work under it. Wear gloves when handling blades. Always check for blade damage if mower strikes a rock, branch, or another foreign object during mowing.
- Direct grass discharge to right, away from unmowed area. Select a mowing pattern that directs grass discharge towards the outside the mowing area. Generally, this means using a pattern utilizing left turns because side discharge is to the right. In any case, avoid throwing grass discharge onto unmowed area because grass is then mowed “twice.” Mowing twice puts an unnecessary load on the unit and reduces mowing efficiency.
- When mowing a lawn for the first time, cut grass slightly longer than normal to avoid scalping uneven terrain. When possible, it is best to use the cutting height that was used in the past. When cutting grass taller than six inches, you may want to mow the lawn twice to achieve a better quality of cut.
- During normal mowing, cut only about 1.5 of the grass blade. Cutting more than that is not recommended unless grass is sparse or it is the end of the mowing season.
- Alternate mowing pattern between cuts to keep the grass growing straight and better dispersion of the clippings.
- Remember, grass grows at different rates at different time of the year. Mow more often in the early spring to maintain the same cutting height. As the growth rate slows in mid summer, mow less frequently. If you cannot mow at a regular interval, mow at a high cutting height at first, then mow again two days later at a lower cutting height.
- Raise the cutting height of the mower if the cutting width of the mower is wider than the previous mower. This ensures that uneven turf is not cut too short.
- Raise the cutting height of the mower if the grass if slightly taller than normal or if it contains a high degree of moisture. Then mow it again with the cutting height set lower.
- If the machine’s forward motion must be stopped
- while mowing, a clump of grass clippings may drop onto your lawn. To avoid this, move onto a previously cut area with the blades engaged.
- Charge the battery immediately if the battery power of the machine is lower than 5%.
- Allow motors 30 minutes to cool down. If drive motor exceeds programmed temperature, the motor speed will decrease. If temperature continues to increase, drive will shut down at a higher programmed temperature.
SLOPE OPERATION
- Travel in the manufacturer recommended direction on slopes. Use caution while operating near drop-offs.
- Do not operate machine under any condition where traction, steering, or stability is in question. Tires could slide even if the wheels are stopped.
- Always keep the machine in gear when going down slopes. Do not coast downhill.
- Use extreme caution when operating on slopes.
- Do not remove or modify any wheels.
- Watch for holes, ruts, bumps, rocks or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.
- Remove obstacles such as rocks, tree limbs, garbage etc.
- Keep all movement on slopes slow and gradual. Do not make sudden changes in speed or direction.
- Avoid starting and stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.
- Mow a safe distance (minimum of 10 feet, or 3 meters) away from drop-offs, retaining walls, drainage ditches, embankments, water, and other types of hazards to avoid a wheel dropping over the edge or the ground breaking away. This will reduce the risk of the machine suddenly rolling over, which could cause either serious injury or death.
- Use a walk-behind, push mower or hand-held trimmer on slopes and near drop-offs, retaining walls, drainage ditches, embankments and water.
- Do not mow on wet grass. Reduced traction could cause sliding and loss of steering control.
- Do not tow on slopes. The weight of the towed equipment may cause loss of traction and control.
- If the mower’s tires lose traction when operating on slopes, disengage the deck drive, place the steering control levers in the park brake position, press the push button switch, remove the magnetic bar and get help.
- Never make sudden starts, stops, turns, or reverse direction, especially when maneuvering on slopes. The steering is designed for sensitive response. Rapid movement of the steering control levers in either direction could result in a reaction of the machine that can cause serious injury.
- Never stop suddenly while backing down slopes. This action may result in a reaction of the machine that can cause serious physical injury.
- The Greenworks mower is capable of operating horizontally (traverse) on moderate slopes. When operating on slopes up to 15 degrees, take care of any conditions that may cause the mower drive tires to lose traction, resulting in a possible loss of control of the machine. An operator should not operate on a slope until he is thoroughly familiar with the equipment.
Do not operate on slopes greater than 15 degrees.
Refer to Slope Guide, when determining the degree of slope to be mowed. It is strongly recommended that the operator drive the machine off of the slope, using extreme caution, if any sign of loss of traction is detected. Wait until the condition that caused the problem is resolved before attempting to operate on the slope again. Terrain conditions can affect traction, resulting in possible loss of control of the machine. Some of the conditions to be aware of are:
- Wet terrain
- Depressions in the ground (e.g., holes, ruts, washouts)
- Mounds of dirt
- Certain types of soil (e.g., sand, loose dirt, gravel, clay)
- Grass type, density, and height
- Extremely dry conditions
- Tire pressure
The attachments mounted to the mower will also affect the way it handles on a slope. Be aware that each attachment’s characteristics vary.
These are just a few examples of situations where caution must be used when operating on a slope. There are many other possibilities too numerous to mention. Remember to always exercise extreme caution while operating on any slope.
DIGITAL DISPLAY
The function of the digital display, located on the control panel, is to provide electrical system information to the operator. It gives detailed information in the form of pattern, codes and number.
FAULTS
The Canbus system will take action to protect the user and machine when it detects an issue. When it acts to turn off the machine or a component, it will indicate that a fault has occurred, and that fault will be shown on the digital display. All electrical faults have a letter code followed by a number. The first letter describes the system that caused the fault according to this chart:
MAINTENANCE
Regular maintenance is the best prevention for costly downtime or expensive, premature repair. The following pages contain suggested maintenance information and schedules which the operator should follow on a routine basis. For more detailed information, refer to the website for your unit. Remain alert for unusual noises, as they could be signaling a problem. Visually inspect the machine for any abnormal wear or damage.
MOWER BLADE MAINTENANCE
Check the mower blades daily. They are the key to power efficiency and well-groomed turf. Keep them sharp.- a dull blade will tear rather than cut the grass, leaving a brown ragged top on the grass within a few hours. A dull blade also requires more power. Replace any blade that is bent, cracked or broken.
DANGER: Touch-up sharpening can be done with a file. Check the blades for balance following grinding. A commercial balancing tool is available through most hardware supply stores, or balancing can be done by placing the blade on an inverted line punch or 1/2 bolt. Blade should not lean or tilt. While spinning the blade slowly, it should not wobble. If blade is out of balance, true it up before reinstalling. Lay the blade on a flat surface and check for distortion. Replace any distorted blade.
The blade sail (curved part) must be pointing upward toward the inside of the deck to ensure proper cutting.
When mounting blades, rotate them after installation to ensure blade tips do not touch each other or sides of the mower.
Failure to correctly torque the bolt may result in the loss of the blade, which can cause serious injury.
Mower blades are sharp and can cut. Wear gloves and use extra caution when servicing them.
REPLACE THE BLADE
Stop the motor, remove the start key, and set the parking brake.
Raise the height of the cutting deck to its highest position to allow access to blades.
NOTE: If necessary, raise the mower by placing on a lift or using a jack and jack stands, or remove the cutting deck as described in the previous section to gain access to the blades.
If raising the mower to access the blades, make sure the mower is properly secured and the parking brake is set before proceeding. Failure to properly secure the mower could cause it to fall, resulting in death or possible serious personal injury.
Wedge a block of wood between the blade and mower deck to prevent the blade from turning.
Loosen the blade nut by turning it counterclockwise (as viewed from bottom of mower) using a 16 mm wrench or socket (not provided).
Remove the blade nut, spacer, blade insulator, and blade.
Thread the blade nut on the shaft and finger tighten.
Torque the blade nut down clockwise using a torque wrench (not provided) to ensure the bolt is properly tightened. The recommended torque for the blade nut is 796~885 in. lbs.
Repeat with the second blade, if needed.
NOTE: Make certain all parts are replaced in the exact order in which they were removed.
TIRES
It is important for level mowing that all tires have the correct amount of air pressure. The recommended pressure are:
NOTE: Tire pressure should only be measured or adjusted when tires are cold.
TORQUE VALUES
Torque values are given below:
- Set the parking brake into the parking slots. Refer to section PARKING BRAKE SETTING in this manual.
- Adjust the mower deck height to the lowest. Refer to section CUTTING-DECK HEIGHT ADJUSTMENT in this manual.
- Attach the supplied wash-port quick-coupler to garden hose.
- Attach garden hose with quick-coupler to wash port on the mower deck. The wash port is on the left side of the mower deck.
- Turn on the water.
- Pull the PTO switch to start the mower cutting blades and adjust the blade speed to the highest. Refer to section Blade-Speed Adjustment Button in this manual.
- Flush water under the deck for approximately one minute.
- Disengage the mower blades by pushing the PTO switch downward.
- Turn off the water and remove garden hose and quick-coupler from wash port.
- Remove quick-coupler from garden hose and store for future use.
- Turn off the mower completely. See section STOPPING THE ELECTRIC ZERO TURN MOWER.
STORE THE MACHINE
The following steps should be taken in order to prepare the machine for storage.
- Clean the machine as described in the previous section.
- Inspect the blade and replace it or sharpen it, if required (refer to the Maintenance section).
- Do not store the machine next to corrosive materials, such as fertilizer or rock salt.
- Keep the machine out of the reach of children.
- Do not cover the machine with a solid plastic sheet.
Plastic coverings trap moisture around the machine, which causes rust and corrosion.
- Check thoroughly for any worn or damaged parts that need replacing and order them from your dealer.
- Thoroughly lubricate machine, according to lubrication instructions.
- Fully charge and service the batteries.
- Do not deflate tires.
- The machine should be stored in a well-ventilated, clean and dry place.
PREPARE FOR USE AFTER STOAGE
The following steps should be taken before using the mower after it has been stored:
- Fully charge the batteries.
- Check tire pressure and inflate as needed.
- Briefly drive the mower and check all systems and components to ensure they are functioning correctly.
TROUBLESHOOTING
The machine does not move.
There is no battery pack in the battery compartment, or the battery inserted is not Greenworks designed.
The battery pack is out of power.
The steer control lever is in the NUETRAL position.
There is no person sitting on the seat or the seat switch is not connected.
The PTO switch, or the the left and right steer control levers are not in the original position when the machine power is on.
The battery pack that controls the drive function is in sleep state.
Make sure at least one Greenwoks designed battery pack is inserted in the battery compartment.
Check the battery capacity.
Make sure the steer control levers are not in the parking slots.
Make sure the operator is sitting on the seat.
Return the steer control lever and PTO switch to the original position, restart the machine. If the machine still fails to work, contact the service center for help.
Turn the key to the OFF position, and restart the machine 5 seconds later.
Sudden breakdown during driving.
The battery is out of power.
The seat switch is disconnected on rugged or bumpy roads.
The vehicle controller fails.
Make sure at least one Greenwoks designed battery pack is inserted in the battery compartment. Make sure the battery pack has power.
Return the steer control lever to original position, restart the machine, operate the steer control lever to check if the machine works normally.
Contact a technical people for help.
The blade fails to run when you pull up the PTO switch.
There is no Greenwoks designed battery pack in the battery compartment.
The battery pack is out of power.
The seat switch is not connected.
The PTO switch is not pushed when the machine is powered on.
The blade motor is blocked or other functional protection.
Make sure at least one Greenwoks designed battery pack is inserted in the battery compartment. Make sure the battery pack has power.
Check the battery capacity.
Make sure the operator is sitting on the seat.
Push down on the PTO switch, restart the machine.
Cut the grass in low blade speed when you power on the machine, set the blade speed to high position once the machine cuts normally. Check if the connection between the blade and motor is without grass or foreign objects to ensure the blade rotates smoothly.
Turn the key to the OFF position, and restart the machine 5 seconds later.
The blade stops running during the mowing process.
The blade motor is overheated.
The deck is full of grass and garbage.
The blade motor is overloaded.
The battery pack termperature is too high.
The battery is undervoltage.
The blade is hit by a foreign object, causing the blade to stop suddenly for protection.
Do not use the machine too much, power off the machine for 5min. Raise the deck height or reduce the driving speed to protect the blade.
Clean the deck to ensure that the blade rotation is normal.
Push down on the PTO switch; restart the machine. Raise the deck height or reduce the drive speed to protect the blade.
The battery pack that controls the blade system enters under-voltage protection state, and the battery should be charged immediately
Turn the key to the OFF position, and restart the machine 5 seconds later.
The machine cuts the grass unevenly.
Grind the blade according to the manual.
Replace the bent blade, replace the blade according to the instructions in the manual, and wear protective equipment.
Adjust the cutting deck according to the instructions in the manual to ensure the left and right deck height are even.
The actual cut height does not match the cut height you set.
The bolt of the deck is loose.
The deck is severely worn or damaged.
Adjust the cutting deck bolt, make sure the deck is not loose. Please balance the deck level after each adjustment.
Replace with a new cutting deck.
The machine cuts the grass abnormally.
The grass amount you set is too much.
Please check the grass before working. If the grass is too wet, please wait until the grass gets drier.
If the grass is too intensive and high, raise the deck height, and avoid cutting intensive grass.
The machine vibrates too much.
The blade cuts too much grass more than the amount you set.
Grind the blade according to the manual.
Replace the bent blade, replace the blade according to the instructions in the manual, and wear protective equipment.
Adjust the cutting deck according to the instructions in the manual to ensure the left and right deck height are even.
Tighten the fixing bolts of the deck.
If the grass is too intensive and high, please raise the cutting deck and try to avoid cutting intensive grass.
There is grass or debris on the ground after mowing.
The blade cuts too much grass more than the amount you set.
The blade speed is too low.
If the grass is too dense and high, please raise the cutting deck. If the grass height exceeds 6 inch, please cut the area repeatedly. Try to avoid cutting intensive grass.
Please check the grass before working. If the grass is too wet, please wait until the grass gets drier.
Turn the blade speed to high position.
The cutting endurance time is short.
Heavy grass can short the running time of the lawn mower.
Raise the cutting deck and reduce the blade speed to extend the running time.
The machine is off the track.
The tire pressure of the left and right rear wheel is different.
Check the tire pressure of the machine regularly according to the instructions.
The machine fails to start after cleaning.
Improper cleaning, water enters electronic components such as LCD or battery compartment.
When cleaning the machine, please clean it according to the instructions.
If the vehicle is accidentally exposed to rain, please put the vehicle in a dry place for 12 hours or dry it before use.
Contact a service center for help.
The deck is full of weeds and garbage.
Please clean the machine correctly according to the instructions after each use.
The machine quickly moves down the slope even if you engage the neutral bypass knob.
Tire wear is too serious.
The neutral bypass knob is damaged or severely worn out.
Check if the neutral bypass knob is disengaged by someone.
Contact a service center to replace the tire or neutral bypass knob.
Check if the neutral bypass knob is disengaged by someone.