Best Lawn Mower Fuel Lines of 2023
Lawn mower fuel lines are an essential part of any lawn mower’s fuel system. These fuel lines connect the fuel tank to the carburetor, allowing the engine to receive the necessary fuel to run. Over time, fuel lines can become brittle and cracked, which can cause leaks and affect the performance of the lawn mower. To ensure that the lawn mower runs smoothly, it’s important to replace worn out fuel lines with high-quality replacements. There are a variety of lawn mower fuel lines available on the market, ranging from universal options to specific models for certain brands and models of lawn mowers.
Our editing teams independently research, review, and recommend the best products based on extensive data analysis; if you click on the product links, we may earn a commission from qualifying purchases.
Top 10 Lawn Mower Fuel Lines
HIPA Fuel Pump for Kohler and Honda Engines
HIPA Fuel Pump 24 393 04-S / 24 393 16-S compatible with CH17-CH25 CV17-CV25 CH730-CH740 CV730-CV740 17HP-25HP engine Lawn Mower
The HIPA Fuel Pump is compatible with various Kohler and Honda engines, including models CH13-CH25, CV17-CV25, and GC135-GXV670. It is also vacuum style and fits 1/4-inch fuel lines. Before purchasing, make sure to verify your engine model and part numbers to ensure compatibility.
10 Feet Fuel Line for Small Engines w/ 20 Clamps
10 Feet 3/16 Inch ID Fuel Line for Kawasaki Kohler Briggs Stratton Honda Predator Champion Generac Small Engines Mini Bike ATV Generator w/ 20 Clamps
The 10 Feet Fuel Line is a heavy-duty 2-layer compound structure that is oil-resistant and can withstand hot and cold temperatures. The non-pressure fuel line measures 10 feet in length and has a 3/16 inch inner diameter and an 11/32 inch outer diameter, with an extra-long design that can be cut to size. It comes with 20 steel hose clamps with an 8mm inner diameter. This fuel line is suitable for use in various small engines such as mowers, tractors, and dirt bikes.
1/4 Inline Fuel Cut Off Valve with Clamps
This product is a brand-new replacement straight fuel cutoff valve that comes with clamps. The package includes two pieces of fuel shut-off valves and four pieces of spring clamps. It is a universal straight fuel cut-off valve that fits 1/4-inch fuel lines, compatible with many small engines including riding lawn mowers, garden tractors, pressure washers, snow blowers, and more. It can be used as a replacement shutoff valve for a wide range of John Deere, Kawasaki, Kohler, Craftsman, Poulan, Cub Cad, and other machine engines.
HOODELL Petrol Fuel Line, 4 Sizes, 4 Feet Long Hose
HOODELL 4 Sizes Premium Petrol Fuel Line, 4 Feet Long Hose for Poulan, Craftman, Chainsaw, String Trimmer and Blower
HOODELL 4 Sizes Premium Petrol Fuel Line is an assortment of 4 different sizes fuel hose, I.D. x O.D.- 0.08 x 0.14, 3/32 x 3/16, 1/8 x 3/16, 1/8 x 1/4. It is made of tygon material which resists oil and gas, fearless against corrosion, swelling, hardening and low temperature. It is versatile and can be used on chainsaw / string trimmer / blower / weedeater / weed whackers and more. It is a must-have for small engine repair and maintenance.
Dalom 4 Sizes Fuel Line for Small Engines
Dalom 4 Sizes 4 Feet Long Fuel Line Fuel Hose Fuel Tube I.D x O.D 1/8 x 3/16 3/32 x 3/16 1/8 x 1/4 0.08 x 0.14 for Poulan Homelite Craftman Chainsaw String Trimmer Chiansaw Blower
Dalom 4 Sizes 4 Feet Long Fuel Line set is a perfect replacement for chainsaws, blowers, weedeater whackers trimmers and other engine machines. The premium tygon material petrol fuel line is oil and gas resistant, corrosion resistant, and comes in four different sizes to fit most 2 cycle small engines. Each line is 4 feet long, offering enough length for your engine needs.
MOTOKU Gas Fuel Line Filter Shut-Off Valve for Lawn Mower
MOTOKU 1/4 Gas Fuel Line Hose Filter Fuel in-Line Shut-Off Valve for Briggs Stratton 698183 Quantum Engine 5414K 5098K 394358S 283207 95162S 791850 for Husqvarna Riding Lawn Mower for Troy bilt
This aftermarket package includes a 25 fuel hose, fuel shut-off valve, fuel filter, and 6 clamps. The high-quality parts are shipped quickly from the USA. Designed for use with Briggs Stratton 698183 Quantum Engine, 5414K 5098K 394358S 283207 95162S 791850 for Husqvarna Riding Lawn Mower for Troy bilt. Perfect for replacing worn or damaged fuel lines on your lawn mower.
Kohler Fuel Pump for Lawn and Garden Engines
The Kohler Fuel Pump Assembly is a genuine OEM part that is compatible with a wide range of lawn and garden equipment engines, including models from Kohler and Craftsman. This assembly may include multiple parts and is a functional equivalent to prior parts with different appearances. Users can refer to their parts manual for a complete list of parts included.
HUZTL 20 Feet Petrol Fuel Line Hose Tube
HUZTL 20 Feet Petrol Fuel Line Hose Tube with 4 Sizes (5 feet each) for Common 2 Cycle Small Engine Weedeater Chainsaw
The HUZTL 20 Feet Petrol Fuel Line Hose Tube is made of tygon, a heavy-duty and durable material that is corrosion-resistant and resistant to hardening and low temperatures. This fuel line comes in 4 different sizes (5 feet each) totaling 20 feet in length, which should cover most needs. However, it is not compatible with fuels containing more than 10% ethanol. This fuel line can be used with chainsaws, blowers, pressure washers, weed whackers, trimmers, and many other 2-cycle gas engine machines.
1/4 Inch ID Fuel Line and Clamps for Small Engines
1/4 Inch ID Fuel Line, 10 Feet Gas Fuel Hose And Clamps for Kawasaki Kohler Briggs Stratton John Deere Craftsman Riding Lawn Mower Tractor Generator Mini Bike ATV Motorcycle Snow Blowers Engines…
This 1/4 inch fuel line is a great replacement for your old lawn tractor. It works fine in most mowers that have 1/4 gas line and is very flexible and durable, suitable for small engines like mowers tractors motorcycle snow blower dirt bikes and more. The correct OD is much easier to install on small engines than larger diameter automotive fuel line. This tubing fits current small engine repair requirements and is perfect for planned future upgrades and repairs. It comes with a series of clamps all different sizes to secure hoses.
Fuel Line Grommet Assembly for Earthquake Auger MC43 E43
Fuel Line Two Hole Grommet Assembly 3004105 for Earthquake Auger MC43 E43 Replace300494 (Pack of 2)
The Fuel Line Two Hole Grommet Assembly 3004105 is a pack of 2 replacement fuel line kits for Earthquake E43 E43CE 10310 Dually earth auger, DP10P 43CC water pumpWE43 WE43E WE43CE Walk-behind edger, E43WC Woodchuck Power Drill. It comes with 2 sets of fuel line kits, 2 primer bulbs, 2 grommets, and 2 fuel filters. It replaces manufacturer part numbers 3004105, 300494, and 30047. Contact the seller if you have any questions.
Frequently Asked Questions (FAQs)
What size is Briggs and Stratton fuel line?
Briggs Stratton In-Line Fuel Filter No. Briggs Stratton In-Line Fuel Filter fits 1/4 fuel line, 30 micron, translucent.
What material can be used for fuel lines?
The best solution is a material called PTFE. That stands for polytetrafluoroethylene—a plastic material that is best known as Teflon in one specific variation. This material is impervious to the degenerative effects of fuel that also creates a vapor barrier so fuel vapors cannot leak past.
Can you use rubber line for fuel line?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
During our lawn mower fuel line research, we found 372 lawn mower fuel line products and shortlisted 10 quality products. We collected and analyzed 18,634 customer reviews through our big data system to write the lawn mower fuel lines list. We found that most customers choose lawn mower fuel lines with an average price of 11.13.
The lawn mower fuel lines are available for purchase. We have researched hundreds of brands and picked the top brands of lawn mower fuel lines, including Hipa, YAMAKATO, LETAYAR, HOODELL, Dalom. The seller of top 1 product has received honest feedback from 3,859 consumers with an average rating of 4.9.
Bryan Hicks is a professional gardener and a writer who lives in North Texas with his family and his dog. Bryan has spent more than half of his life surrounded by garden products. He has extensive experience in garden makeovers and maintenance and lawn care. His areas of expertise include outdoor decoration, gardening and garden design.
FindThisBest aims to create a platform to help you make better shopping decisions with less time and energy. Earning our users’ trust is central to what we do.
© FINDTHISBEST. 2023 FTB. All rights reserved.
As an Amazon Associate we earn from qualifying purchases. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Amazon, Amazon Prime, the Amazon logo, and the Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates.
How to Clean a Lawnmower Fuel Line?
When your lawnmower does not start, it can be a real mood destroyer. Similar to when the mower starts but stops running after a few minutes. There could be many possible reasons behind these problems. A a faulty spark plug, no gas or bad gas, oil-related problems, a carburetor issue, a defective starter, or a dirty and clogged fuel line. In this blog post, we will explain what to do when the fuel line is the cause of the problem. In gas mowers, the fuel line connects the gas tank with the carburetor. A dirty or clogged fuel line means a disruption in the fuel supply and problems with starting or running. The fuel line is one of the most critical fuel system components and works together with the fuel filter. This blog post will show you how to clean the fuel line and the components connected to it. Most of the work is fairly simple and does not take a lot of time.
How to clean the fuel line of your gas mower:
Locate the fuel valve and turn it off. If there is not fuel valve, empty the fuel tank. Empty the fuel line after disconnecting it from the carburetor. Use a flashlight to check for holes, dirt, and debris in the fuel line. Use a fuel cleaner to clean the dirty fuel line. If that does not help you have to replace the fuel line. Check the filters and vents for any dirt and debris and clean if needed.
This blog post will show you how to clean the individual components of a gas mower’s fuel system in more detail.
Small Engine Fuel system:
The engines of most gas mowers can be regarded as small engines. Most small engines have similar fuel systems, only the location of the components will differ from type to type. The job of a fuel system is to store fuel and deliver it to the carburetor. The carburetor prepares the fuel-air mixture, also called power charge, to the combustion chamber, where the mixture is compressed and combusted to produce power.
It is quite common for small engines’ fuel systems to become dirty and clogged after extended use. When the fuel system becomes clogged, the carburetor’s supply is disrupted, and the carburetor fails to prepare the right fuel-air mixture. When the fuel-air mixture with wrong ratios is fed to the combustion chamber, its combustion is improper and incomplete. This results in less power. Therefore, a small engine with a faulty fuel system will fail to run smoothly and efficiently. A defective fuel system can also cause other problems, such as not starting.
The most common fuel system components of a small engine include the fuel tank, fuel pump, fuel valve, fuel line, fuel filter, air cleaner, carburetor, and governor. The fuel system should be checked, serviced and cleaned regularly.
Before starting with any fix, ensure that the mower is turned off. Disconnect the spark plug cables to make sure that the engine can not start unintentionally. Use safety goggles to protect your eyes. In general, cleaning the fuel line is not a big job for users that are familiar with the fuel system. If you are less familiar, it is good to learn more about the fuel system first. This helps to find the location of the various components and how they are connected. Often you can find detailed information in the manufacturer’s manual.
Fuel Line:
A fuel line is a hose responsible for the supply of fuel from the tank to the carburetor. Fuel lines of small engines are usually made of synthetic rubbers such as neoprene. Fuel lines can become dirty and clogged over time, and when this happens, they must be either cleaned or replaced.
Fuel line servicing:
To service a fuel line, the first step should be to turn off the fuel valve. If your lawnmower does not have a fuel valve, empty the gas tank. If your lawnmower has a fuel valve, it is often located near the gas tank base, at the location where the fuel line is attached to the fuel tank body.
Once this is done, disconnect the carburetor’s fuel line from the carburetor. Empty the fuel line and inspect it for hairline cracks or damage on its surface. If the fuel line is cracked or damaged, there is no point in trying to repair it. It would be best if you replaced it with a new one.
Use a flashlight to inspect the fuel line for any accumulation of dirt and debris in it. Dirt and debris can reach the fuel line because of dirty fuel or a dirty fuel tank. You can remove dirt from the fuel line by blowing air through it or using a thin wire to push it out. If you use a thin wire to clean the fuel line, be careful because it is easy to rupture it.
Gas sitting in the tank for an extended period of more than a month or longer can produce a sticky gum-like substance that can clog the fuel line and the carburetor. You can use a fuel cleaner to remove the substance. We will provide details on using a fuel system cleaner in a later section in this blog post.
For your fuel system’s health, never let gas sit in the tank when your store the mower. Remove it before storing your mower, or use a fuel stabilizer.
Fuel Filter:
The fuel filters clean the gas before it goes to the carburetor. There are different types of fuel filters, depending on the brand and model. Some lawnmowers use a fuel filter at the bottom of the fuel tank, while others use a fuel filter that is present somewhere along the fuel line’s length. Some lawnmowers even use disposable in-line fuel filters that are made of folded paper.
Just like a dirty fuel line, a dirty fuel filter can also disrupt fuel flow. Cleaning fuel filters is usually not very easy, and the best approach is to replace them.
-Fuel filter located at the fuel tank bottom:
The first step to clean a fuel filter located at the bottom of a fuel tank is to close the fuel valve. Then take off the sediment bowl by loosening and removing its retainer nut. Empty the sediment bowl and clean it. Then clean the filter screen.
Once cleaned, fill the sediment bowl with fresh fuel and install it back, tightening the bowl retainer’s lock nut.
-In-line fuel filter:
An in-line fuel filter usually cannot be cleaned and must be replaced for undisrupted fuel flow. To replace an in-line fuel filter, shut off the fuel valve, or clamp the fuel line to block flow. With this done, remove the fuel filter from the fuel line, and install the new one. The new in-line fuel filter should exactly match the one being replaced. Once the new filter is installed, turn on the fuel valve, or unclamp the fuel line.
Fuel Tank:
A clean fuel tank is crucial for an unclogged fuel system. A fuel tank may be pressurized or unpressurized depending on whether the mower has an onboard fuel tank or a fuel pump, respectively.
Gas tank servicing:
To service your gas tank, the first thing to do is ensure that there is no vapor lock. The fuel tank’s gas cap has a small hole in it to escape hot gases and entry of fresh air. If this hole gets clogged, it will result in a situation that causes a vapor lock. Vapor lock can prevent gas flow from the tank to the fuel line and cause the fuel to flow back from the carburetor into the fuel line. So, take off the gas cap and check if its hole is dirty. If it is dirty, clean it.
The next step is to drain the gas out of the tank. You can do this by disconnecting the carburetor’s fuel line and allowing gas to drain through it into a bottle or a pan. Once the tank is empty, use a flashlight to examine its bottom surface for a buildup of sediments and debris. Clean the tank thoroughly with soap and a slim brush and allow it to dry before refilling it.
Honda’s Newest HRN216 Mower in 2023: Good? Bad? Ugly?
If the gas tank is cracked, it must be replaced.
Using a Fuel System Cleaner:
Gas sitting in the tank for a prolonged time can cause a gummy buildup at various locations in the fuel system. Depending on the gas type, this can already start from a month. The best way to remove this gummy material is by using a fuel system cleaner. Make sure you use a cleaner suited to your lawnmower. In this regard, consult the manufacturer.
BEFORE YOU BUY A HONDA HRN216 MOWER, WATCH THIS REVIEW!
Using a fuel cleaner is to fill up the tank with a gallon of fresh fuel and add two tablespoons of cleaner to it. Start your mower normally, and run it with a normal throttle. Use the mower until the added gallon of fuel is used. Then fill your tank with fresh gas for later usage.
We recommend adding a fuel system cleaner to your mower’s gas tank once every 30 to 60 days to keep the fuel system clean.
Final Remarks:
A small engine’s fuel system is an essential part of your gas lawnmower. A clean fuel system is necessary to deliver an undisrupted supply of fuel to the combustion chamber. Keeping the fuel system clean and clear requires regular maintenance, which is not too difficult and can easily be performed by the user. In addition to regular maintenance, using a fuel system cleaner can also ensure a clean fuel system.
How To Find, Clean and Replace a Lawn Mower Fuel Filter
davidf/Getty Images
Got a push mower you depend on? If so, it pays to know how your lawn mower fuel filter works, and how to change it.
The summer I turned 14, I got a job cutting grass at a children’s camp. I shared this task with a few other teenagers, using an old Honda walk-behind mower.
One day when it was another guy’s turn, the mower abruptly sputtered to a stop. No one could figure out why. Luckily, my dad taught me about lawn mower fuel filters the year before.
It turned out the fuel filter hadn’t been checked or changed in nearly five years! It was completely clogged, stopping the mower dead in its tracks. The camp maintenance crew didn’t have a fresh filter on hand, but a quick rinse under the tap made the old one as good as new. The mower was up and running again in less than 15 minutes.
If you use a lawn mower or any small engine machinery regularly, it’s wise to learn about fuel filters. Here’s what you need to know.
What Is the Lawn Mower Fuel Filter?
It’s a small device that prevents dirt, dust and debris from entering the carburetor. Gas needs to be clean to flow and burn properly, and fuel filters make this happen.
Without a fuel filter, any debris that got into the gas tank could eventually flow through the fuel line to the carburetor. There, it would disturb the gas-air mixture and lead to poor engine performance.
Where Is the Lawn Mower Fuel Filter?
Exact location varies from one machine to the next, but it’s generally inside or attached to the fuel line, or inside the gas tank.
Lawn mower fuel filters can be replaceable or non-replaceable.
The replaceable kind is a small plastic canister with pleated material inside, or a thin and straw-like tube-style device with a fine mesh at one end. The canister style connects to one end of the fuel line, while the straw style slides inside the fuel line where it connects to the gas tank.
The non-replaceable kind is a metal mesh in the bottom of the gas tank where it empties into the fuel line.
How To Replace a Lawn Mower Fuel Filter
Once you have your new lawn mower fuel filter or cleaned the old one, installation only takes only a few minutes. You’ll need pliers and a plastic container to catch any gas sitting in the bottom of the tank or in the fuel line.
- Follow the steps above in the “How To Check and Clean a Lawn Mower Filter” section.
- For canister-style filters, once you’ve removed the old filter, push the ends of the fuel line segments onto the spigots of the filter and use pliers to replace the spring clips.
- Be sure to install the canister-style filter in the correct direction, usually indicated by an arrow on the casing pointing in the direction of fuel flow.
- For tube-style filters, once you’ve pulled the old one out, pop in the new one. Be sure to orient it the same way the old one was.
- Reconnect the fuel line, replace the spring clamps and you’re good to go.
How Often Should I Replace a Lawn Mower Fuel Filter?
At least once a year. In the 20 years I’ve been mowing grass, I’ve never cleaned or changed the fuel filter more often than that, usually after each mowing season. Some years I’ve forgotten to do it, but it’s never been a problem. Still, be sure to add this to your annual maintenance checklist.
Where To Buy Replacement Lawn Mower Fuel Filters
Whenever I need a lawn mower fuel filter, I order it from Amazon. They offer great selection and fast delivery. Check your owner’s manual or look closely at your old filter to get the right part number.
Robert Maxwell is a writer, videographer, photographer and online strength coach based in Northern Ontario, Canada. He grew up on a rural self-sufficient homestead property where he learned the skills to build his own home from the ground up, do all his own vehicle repairs, and work with wood, stone and metal to find practical DIY solutions to many everyday problems.
Replace the Fuel Line on a Lawn Mower (How To Do It)
Whether your fuel line is damaged or just old, changing a fuel line isn’t as difficult as you might think. With just a couple of tools and a new replacement line, you’ll be able to swap it out in no time. I’ve put together a guide, which applies to both walk-behind lawn mowers and ride-on mowers, so no matter which you use, I’ve got you covered.
Why You Might Need a Lawn Mower Fuel Line Replacement
If you’ve driven your mower into a bush or two, then there’s a good chance you have damaged your fuel lines and need to replace them.
However, if you’re a cautious mower driver and your fuel lines need replacing, it’s likely because they have degraded with time. When fuel lines get old, they develop dry rot, causing them to crack and split and produce small, pesky leaks. And a lawn mower leaking gas is a serious hazard.
Dry rot is what most of us have to battle against when it comes to preserving our fuel lines. The recurring problem I face is splitting the line when changing my fuel filter. The old line loves to break just enough so that it can’t be used.
Other noteworthy reasons to change your fuel lines are blockages and poor fuel flow. Having debris in the fuel, such as grass clippings or fuel gum from aging fuel, could block your fuel line.
Whether you have snagged your fuel line on a bush or have a leaking, cracked line, you will need to replace the fuel line on your lawn mower.
Equipment You’ll Need to Replace Your Mower’s Fuel Line
Thankfully, lawn mower fuel line replacement only requires a couple of common tools that I’m sure you already have in your toolbox. So the only part you’ll likely need to purchase is the new fuel line. If you are unsure which fuel line to get, just take a section of your fuel line down to the lawn mower parts suppliers and let them help you.
Tools Parts to Replace the Fuel Line on Your Lawn Mower
- Fuel Line
- Handheld Snips
- Pliers
- Socket Wrench
- Flathead Screwdriver
- Marker Pen
How to Replace the Fuel Line on a Lawn Mower (Step By Step)
Now, you may be wondering if you should use the same steps for different fuel lines on your lawn mower. Yes, it doesn’t matter if it’s the fuel line between the tank and the filter or the filter and the fuel pump or any of the other fuel lines. So, let’s look at the steps you’ll want to follow.
Switch Off the Fuel
The first thing you will want to do is switch off the fuel. Once you remove a fuel line, the gasoline will free-flow out of the line. If you have a fuel cut-off valve, then simply turn it OFF. If not, then you’ll need to drain the fuel tank.
Remove the Engine Cover
Next, remove the engine cover so you can easily access the fuel lines. Take your socket wrench, remove the fixing bolts that support the engine cover, and set them to one side. Then, lift off the cover and set it aside.
Release the Spring Clips
To remove the spring clips, you’ll need to grab your piers. Pinch the clip’s prongs to open it and slide it to the middle of the line. I find that using a flathead screwdriver helps slide the clip along the fuel line. Next, you’ll need to move the clip on both ends of the fuel line to the center of the line.
Pry Off the Fuel Line
You need to be careful when removing the old fuel line since they tend to stick to the lawn mower part as if stuck with glue. I’d suggest trying to twist them to break the seal first.
Next, pull the fuel line from the attached part, such as the fuel filter or tank. If it’s tight and difficult to remove, then take your flathead screwdriver and try pushing the line off at the same time as you pull.
Again, just be very careful since you don’t want to break anything when trying to remove the fuel line.
Remove the Spring Clips
Once you have removed the fuel line, you’ll need to remove the clips for later use. Using the same method as before, take your pliers and remove both clips from the fuel line.
Cut the New Fuel Line
Line up the old fuel line with the new fuel line and mark the length of line you need with your marker pen. Then, take your snips and cut the new pipe to the desired length. When snipping the line to length, try to get it as square as possible, so you get maximum contact between the line and engine part.
Install Spring Clips to the New Pipe
Take your newly cut fuel line and install the spring clips. Then, using your pliers, open the clips and slide them to the center of the line. This is the one stage of the fix that I always seem to forget, so take your time and remember the spring clips or you’ll be removing the fuel line again.
Slide on the New Fuel Line
Again, you need to be careful of the delicate parts to which you’ll attach the new fuel line. I find the best way to get the new fuel line on is to twist and push at the same time. Also, I look to see which is going to be the hardest end to install and start there.
When installing the new line, make sure that it’s pushed on completely to the point that it can not physically go any further. If you’re having problems getting the pipe on far enough, you may be tempted to stop short, but this could lead to future leaks, so be persistent.
Reposition the Spring Clips
Once you have the fuel line in place, grab your pliers for the final time and reinstall the spring clips. Make sure you position the clips correctly in the same position as they were before you started the fix. I like to use the old pipe as a reference since it likely has imprints of their old position.
Reinstall the Engine Cover
The final stage of the fix is to reinstall the engine cover. Using your socket wrench, install the fixing bolts and secure the cover back into place.
Test the Fuel Lines
Now that you have completed all of the steps to replace the fuel line on your lawn mower, you can go ahead and test for leaks. Refill the gas tank, or open the cut-off valve, and start your lawn mower. Allow the mower to idle for a few minutes, then check for leaks. You should have no problem if you correctly installed the new fuel line and clips.
Things to Be Careful of
A few things could cause you problems when changing your fuel lines. First, the inside diameter of the pipe must be correct. If it’s too small, you’ll have major difficulty trying to install it. If it’s too big, it’ll definitely have leaks. Additionally, it’s important to make sure the length is just right. If it’s too short, it could have poor contact with the engine parts. If it’s too long, it could create a kink in the line, which stops fuel flow.
My best advice is to change the fuel line like for like. This is where the guys at the mower store come in handy, and take your time when measuring the lines.
Preventing Dry Rot
Knowing how to protect your fuel lines from the cracking and splitting caused by dry rot is handy. Silicone-based spray lubricants are great to use on rubber fuel lines. This lubricant will protect your lawn mower fuel lines from the elements such as sunlight and keep them supple.
If you use a belt dressing on your mower’s drive and deck belts, you may already have some lubricant in your garage. Just double-check the label and make sure it can be used on the fuel lines. If not, then there are a number of products on the market that are available for your fuel lines.
About Tom Greene
I’ve always had a keen interest in lawn care as long as I can remember. Friends used to call me the lawn mower guru (hence the site name), but I’m anything but. I just enjoy cutting my lawn and spending time outdoors. I also love the well-deserved doughnuts and coffee afterward!