How can you cut aluminum sheets. Light methods of flat cutting of a metal leaf with a corner grinder

Choose aluminum disks for corner grinders

With independent repair in an apartment or house, most people often face the need to cut various types of metal structures. In order to carefully perform these works, you need not only to choose and buy the tool itself, but also choose the right detachment circle correctly. After all, not every metal can be quickly and evenly cut off with a universal nozzle. Choose aluminum disks for corner grinders correctly.

Features of aluminum processing

Many questions from the townsfolk are raised by cutting soft metals. In particular, aluminum. To process such material, there is a wide variety of nozzles for sawing, which have different diameters. Also released and circles for grinding aluminum. Description of cutting circles for corner grinders must be started with their size. So, the external diameter of such products varies from 125 mm to 230 mm. The thickness of the cutting nozzles is in the range from 1 to 3.2 mm. As a rule, a larger disk diameter corresponds to a larger width. As for the circles of small diameter, their thickness can be any, depending on the purpose.

If we talk about aluminum, then for its processing, circles are used with a thickness of about 1 mm. This choice is explained by the alloying of this metal. During operation, the thick nozzle of aluminum becomes viscous from friction and begins to score an abrasive circle with its particles. In such a situation, the disk just stops cutting.

As for the configuration and coating of the cutting part, most often circles for aluminum have diamond fine spraying and cutting edge in the form of several sectors. In fact, this is a saw disk by concrete. It is for them that it is convenient for them to carry out work on cutting aluminum structures. For example, cut a profile. The diameter of such a disc is minimal, that is, 12.5 cm.

Circles of the maximum diameter of 23 cm are most often multifunctional and cut not only metals, but also concrete, plastic pipes and even a tree with nails.

I must say that only by appearance to understand the exact purpose of such a nozzle is almost impossible. Therefore, when buying, it is best to consult with the seller or study the characteristics indicated on the disk itself.

Kryazuvka for metal

When decorating buildings during the construction of specialists, a end saw helps out, with which you can cut a sheet of metal. However, the use of power tools is not always appropriate. For a gentle approach, a manual device is chosen like a simple and reliable hacksaw for metal.

There are special canvases designed for the saw of soft and non.ferrous metals source farpost.ru

Cutting aluminum sheets that do not have a large cross section has several drawbacks, namely:

• an uncomfortable work format during which the specialist is forced to simultaneously fix the profile and perform movements. Because of this, the quality of the product is reduced;
• In the process of cutting, the material loses its original form;
• manual processing takes more time than machine.

From the advantages of the use of hacksaw, the following are distinguished:

• A simple principle of operation is available in the development of even an inexperienced specialist;
• The light weight of the product provides the use of manual labor for a long time;
• the possibility of use in any situations;
• Despite the increase in time spent, the productivity of aluminum processing is at the level of some power tools.

Scissors for metal

The tool is characterized by convenience and ease of working with aluminum. Metal sheets are pre.marked.

• the need for training before the chill of a sharp metal. A person without experience will not perform an action along the marking lines;
• Due to the features of the structure of the profile, the probability of deformation of the product or the implementation of uneven cuts is high.

There are special scissors for aluminum, but they are not suitable for cutting profiles, it is worth giving preference to the classic version of Artem-Tools source.ru

What is worth paying attention to when choosing sawing discs for aluminum and metal:

Material for sawing. In their structure, plastic, hard plastic, aluminum, practically do not differ, therefore, for their sawing, one type of disks can be used. But, making a choice, it is important to know with which workpiece you will have to work. a hollow or massive. Typically, manufacturers indicate on the packaging and in the description of goods, for working with which products the saw disk is suitable.

The number of teeth is one of the main factors on which the performance and quality of the cut depends. The more teeth, the better the cut. And, accordingly, with the number of teeth, the cost of the file disk increases and the cost of. For example, alu-positiv 11.1000. the best option for high.quality and quick work.

Types and angles of teeth. For high.quality work, you need to choose saws not only with a large number of teeth, but also their correct location. It is important to pay attention to the angle of inclination. The highest quality cut is obtained with a negative angle of inclination. A positive angle of inclination provides good speed. But with a small number of teeth, this factor has little effect on performance. Therefore, for a quality production process, it is primarily worth paying attention to this factor.

On yourself or from yourself

The most common question that torments many owners of a corner grinding of a grinding is “how to cut a corner grinder correctly so that the disk spins from itself or on itself?””. There are many opinions, and everyone proves their own point of view. But the correct answer is one: “You can cut both from yourself and yourself”. Obvious evidence of this is the presence of holes under the handle on both sides of the device. In general, it all depends on individual preferences, to whom it is convenient, he cuts so. However, each method has certain nuances, they should be taken into account.

Push

Many owners of corner grinder do not like and can not even cut from themselves. The bottom line is that this method rarely forgives errors. Any inaccuracy or cutting curve leads to a clip of disk and its rupture. I want to say that I have a friend who is used to cutting on myself, and taking my corner grinding in his hands ditched two discs and gone shouting. This is a person who has been working with a corner grinder for about 10 years. There is also a myth that when you cut it from yourself, when the disk is jammed, the corner grinder will fly away into the stomach. I want to say that if it is normally not holding it in my hands, then it can even fly out of the workshop. The advantage of metal cutting from yourself is that sparks fly from corner grinding and may be better to see the product. In addition, with a disk rupture, it will fly away from you.

To myself

Metal cutting at a speed of disk allows you to work with a corner grinder, sorry for the expression, with a slight negligence. But you pay for such convenience sparks flying into the eyes and on your feet. If the protective casing is set incorrectly, then the risk of burning pants increases exponentially. In addition, the product is visible much worse, and when a rupture, the disk can fly under your feet. When cutting metal in this way, I recommend holding the angular grinder so that in the case of jamming and rupture of the disk, the latter cannot get in the leg or other part of the body.

Scissors for metal

The tool is characterized by convenience and ease of working with aluminum. Metal sheets are pre.marked.

• the need for training before the chill of a sharp metal. A person without experience will not perform an action along the marking lines;
• Due to the features of the structure of the profile, the probability of deformation of the product or the implementation of uneven cuts is high.

There are special scissors for aluminum, but they are not suitable for cutting profiles, it is worth giving preference to the classic version of Artem-Tools source.ru

Industrial cutting of aluminum profile

Plasmical equipment for cutting aluminum profile allows you to get the perfect quality of cutting. For processing aluminum, a plasma cutter should be chosen as plasma.forming gases of hydrogen, argon, or nitrogen. inactive gases.

Active gases (oxygen, air) are used for plasma cutting of ferrous metal.

Compressed air is also applicable for cutting aluminum blanks, but only if they are not thicker than 70 mm. The nitrogen-argon mixture for cutting aluminum is not suitable.

Cutting aluminum using pure nitrogen is quite acceptable if the workpiece is not thicker than 20 mm. To cut aluminum blanks, the thickness of which reaches 100 mm, a mixture of nitrogen with hydrogen will be required.

A mixture of an argon with hydrogen is optimal for working with aluminum, it is suitable for cutting aluminum blanks of significant thickness. over 100 mm. For the stability of the plasma arc, mixtures with M hydrogen are not higher than 20 % should be used.

Hydrobrazive equipment for cutting an aluminum profile allows you to get products with a high.quality cut and medium indicators of roughness of the edge.

Metal loss when using this technology is minimal. Hydroabrasive cutting is not accompanied by heating of the workpiece, it is a fire and explosion-proof.

Cutting occurs due to the exposure of a narrowly directed stream of water under high pressure. Abrasive grains are added to the water, the composition and value of which can be different depending on the parameters of the processed material and the conditions of work.

Hydroabrizative technology allows you to cut metal up to 300 mm thick. It is possible to cut a whole stack of thin sheets of metal at once.

With the help of hydro.carbrane cutting of an aluminum profile, you can get parts of a complex shape, cutting them out with high accuracy. So it is possible to qualitatively perform even such difficult operations as the formation of bevels, internal radii and even sharp corners.

Hydroabraseic cutting is safe for the environment, since during operation there is no formation of harmful chemicals and microparticles that clog air. For processing large quantities of the profile, a hydro.carbrane machine with a numerical control (CNC) is used. The operator only looks after the equipment that independently cuts the aluminum profile in a given mode, according to the established program.

Guillotine is a blacksmith-press installation. There are three options for such attitudes: guillotics working in manual, mechanical and hydraulic regime.

Mechanical guillotine functions according to the principle of a kinematic chain, and hydraulic. using a working fluid.

Hand guillotines make it possible to easily cut thin aluminum sheets with a lever-spring mechanism.

Mechanical guillotics are connected to the power source.

This kind of device is used when when processing metals (including aluminum), high accuracy is not required, since cutting on mechanical guillotics allows deviations of 2 mm or more.

Only stationary hydraulic guillotines equipped with the rear ruler provide a very accurate incision.

As a result of replacing hydraulic guillotine engines more powerful and modern analogues, installations are created that can cut aluminum almost any thickness.

Review of compact equipment

Aluminum profile cutting can be carried out by various devices. For example, in the preparation of such material for the further installation of drywall the most convenient and practical in operation, compact devices are found in operation. Many masters prefer to use such equipment, since it does not take up much space, is easily transferred from place to place, and for working with it you do not have to make a lot of unnecessary efforts.

Consider the main features of the most popular compact devices with which an aluminum profile can be cut.

Hacksaw

Not in all cases, there is the possibility of using electrical equipment to cut a metal profile. We are talking about tools like a end saw. For this reason, masters often have to cost a simpler tool. The most popular and practical device is a scabbard for metal. Through this device, it will be possible to cut the sheet material and the profile of moderate thickness. They always begin to do cutting from the ribs, and then they act already on the back side. Finish on the sides.

The metal hacksaw has a lot of positive qualities that make it convenient and practical.

• A similar tool is characterized by a very small weight. Due to this, during the cutting of the aluminum profile, the hands do not get tired and do not start to get sick.
• Working with the tool under consideration is extremely simple. Everyone is capable of dealing with the principle of operation of a hacksaw for metal.
• This device itself is inexpensive. Metal hacksaws are sold in many stores. In most of them, this tool has more than a democratic price tag.
• The efficiency of a hacksaw can be compared with the efficiency of an electric jigsaw. Of course, working with a manual tool, the master is leaving more time and efforts.

Of the minuses, it is worth noting the following.

• A lot of time is spent on the cutting of metal.
• In the course of cutting the profile of aluminum, it may be deformed.
• Working with a hacksaw, the master will need to maintain an aluminum profile all the time. In this case, the clarity of the work will not be guaranteed.

Scissors

Cutting metal parts is even easier if there are special scissors in the tools. The process is extremely simple: it is enough to first mark the aluminum profile, and then cut it along the planned lines.

Scissors for metal work also have their own positive qualities. Let’s get acquainted with them.

• By means of scissors, the metal is cut faster than in the case of the use of a hacksaw.
• Metal scissors are inexpensive and sold in many stores, which indicates their availability.
• If the tool is high.quality, and the master acts competently, then you can get very good and accurate results.

Scissors for metal are not devoid of certain flaws.

• At the time of moving through the ribs of the workpiece, the risk of leaving from the applied marking line is high. Because of this, the workpiece itself or its bend is noticeably deteriorated.
• Before cutting an aluminum profile, you will need to practice a little on the “black” blanks that are not a pity to spoil. You have to learn a little to cut the metal perfectly correctly and accurately, and this is extra time costs.

corner grinding

A great tool that is very good functional capabilities. By means of corner grinding, the aluminum profile can be cut as simple and fast as possible. Of course, for cutting you will need to use not grinding, but detachment circles. It will be necessary to choose a snap, which is characterized by a small thickness parameter. Only in this way it will be possible to reduce losses in the material as much as possible.

When carrying out work with a corner grinder, the master will definitely need to use protective equipment to protect the eyes and skin from sparks from getting on them.

Such a popular tool as an angular grinder has a number of significant advantages.

• Through the corner grinder, the master can make a very accurate, sure cut. At the same time, it will take very little time.
• Such equipment is relatively inexpensive and is produced by many well.known brands. In stores you can find a corner grinder of both budget and very expensive category.
• Working with the tool under consideration does not require great effort from the master.
• A special equipment intended for work with an aluminum profile is designed for a long service life. An ambulance she should not demand.

Against the backdrop of attractive qualities, do not forget about the shortcomings that the corner grinder has.

• During the work, there is a risk of burning aluminum workpiece.
• To make an absolutely even and correct cut is not so simple if the master does not have appropriate skills and experience with a corner grinder.
• To achieve high accuracy of aluminum cutting, it is advisable to fix the corner grinder on a special base-stand. This part is sold separately and in stores it is far from always. If there is no such item, some masters use the vice.

What else can you cut?

Correct and neatly cutting aluminum profile can be implemented not only by compact tools. For such work, special laser, milling or plasma installations are also perfect. It is very convenient to work with them and you can get good results. No less relevant are saws. Below consider what features such functional equipment has.

Plasma, laser, milling installations

Plasma and laser machines are an ideal solution if you want to cut the metal as quickly and efficiently as possible. True, such options are not suitable for home use. Plasmoresis and laser machine belongs to the category of professional equipment. Such equipment can be found at various large enterprises.

Such equipment has the following positive characteristics:

• The cutting of aluminum with a laser or plasma machine will take only a couple of minutes;
• The master only needs to configure professional equipment, and the machine is done by all other work;
• The quality of the cut with such equipment will be the highest.

Of the minuses, one can note:

• the high cost of such high.class equipment;
• In home or garage conditions, it is not possible to use such equipment;
• During operation, laser and plasma machines emit a lot of noise.

Separately, it is worth talking about modern milling installations. Such equipment must be correctly configured by the operator to work with aluminum. This requirement is explained by high indicators of the softness and plasticity of the specified material. Also, the installation of small speeds of milling equipment (from 5,000 to 9000 per minute) is no less important. Previously, you will need to drip a little kerosene on the area where the cut will be carried out.

The work of the workpiece here should be as neat as possible, in other cases you can ruin the milling cutter. The pros and cons of the milling apparatus are similar to those in the laser and plasma cutter, but the quality of processing of parts is a little less high.quality.

Often for cutting metal, different types of saws are used. We learn about the characteristics of the most popular options.

• Circular. An analogue of manual tools, but with greater power. Circular saw can be made longitudinal, transverse and inclined sections (for example, at an angle of 45 or 90 degrees). Modern technology is able to eliminate overheating, disconnecting at the right time. This is a durable, reliable and practical device, maneuverable, reduces the time to carry out work.
• Disk. Many disk saw models are able to cut very large workpieces in size. The tool itself can have very small dimensions. A disk saw can be done angular cutting. The accuracy of the work here is the highest possible. True, the saw, in the design of which there is a special disk, will cost a tidy sum.
• End. In many ways similar to a disc saw. Can cut along, right, sloping. Strong fixation of the workpiece in special clamps is provided. The end saw can cut long aluminum profiles.

Industrial cutting of aluminum profile

Plasmical equipment for cutting aluminum profile allows you to get the perfect quality of cutting. For processing aluminum, a plasma cutter should be chosen as plasma.forming gases of hydrogen, argon, or nitrogen. inactive gases.

Laser cutting of metal. Fry of metal powder painting metal welding work

Active gases (oxygen, air) are used for plasma cutting of ferrous metal.

Compressed air is also applicable for cutting aluminum blanks, but only if they are not thicker than 70 mm. The nitrogen-argon mixture for cutting aluminum is not suitable.

Cutting aluminum using pure nitrogen is quite acceptable if the workpiece is not thicker than 20 mm. To cut aluminum blanks, the thickness of which reaches 100 mm, a mixture of nitrogen with hydrogen will be required.

A mixture of an argon with hydrogen is optimal for working with aluminum, it is suitable for cutting aluminum blanks of significant thickness. over 100 mm. For the stability of the plasma arc, mixtures with M hydrogen are not higher than 20 % should be used.

Hydrobrazive equipment for cutting an aluminum profile allows you to get products with a high.quality cut and medium indicators of roughness of the edge.

Metal loss when using this technology is minimal. Hydroabrasive cutting is not accompanied by heating of the workpiece, it is a fire and explosion-proof.

Cutting occurs due to the exposure of a narrowly directed stream of water under high pressure. Abrasive grains are added to the water, the composition and value of which can be different depending on the parameters of the processed material and the conditions of work.

Hydroabrizative technology allows you to cut metal up to 300 mm thick. It is possible to cut a whole stack of thin sheets of metal at once.

With the help of hydro.carbrane cutting of an aluminum profile, you can get parts of a complex shape, cutting them out with high accuracy. So it is possible to qualitatively perform even such difficult operations as the formation of bevels, internal radii and even sharp corners.

Hydroabraseic cutting is safe for the environment, since during operation there is no formation of harmful chemicals and microparticles that clog air. For processing large quantities of the profile, a hydro.carbrane machine with a numerical control (CNC) is used. The operator only looks after the equipment that independently cuts the aluminum profile in a given mode, according to the established program.

Guillotine is a blacksmith-press installation. There are three options for such attitudes: guillotics working in manual, mechanical and hydraulic regime.

Mechanical guillotine functions according to the principle of a kinematic chain, and hydraulic. using a working fluid.

Hand guillotines make it possible to easily cut thin aluminum sheets with a lever-spring mechanism.

Mechanical guillotics are connected to the power source.

This kind of device is used when when processing metals (including aluminum), high accuracy is not required, since cutting on mechanical guillotics allows deviations of 2 mm or more.

Only stationary hydraulic guillotines equipped with the rear ruler provide a very accurate incision.

As a result of replacing hydraulic guillotine engines more powerful and modern analogues, installations are created that can cut aluminum almost any thickness.

Aluminum profile cutting nuances on a CNC machine

The processing of aluminum on CNC machines ensures the production of high.quality parts used in aircraft industry in the production of military and space equipment. In recent years, many compact, relatively inexpensive models have appeared, they can be found in car repair shops. “Hobbie” CNC machines have become popular among creators of models. Independently making rare details, models pay for the cost of equipment.

The unique properties of aluminum are well known:

• ease in combination with strength;
• corrosion resistance;
• low thermal conductivity (hence the demand in shipbuilding);
• high electrical conductivity;
• low price.

When processing an aluminum profile on a CNC machine, it is extremely important to choose the right cutting mode, otherwise the cutting tool will quickly fail. In addition, aluminum shavings sticks to the cutting surface, clogs the openings and grooves of the tool, which also leads to its rapid wear.

We give 10 important rules for processing aluminum on the CNC machine.

Following them, you can achieve the best results, as well as save equipment:

• You need to work slowly. Choose cutting mode, focusing on both the character of the machine and the end tool, and on the dimensions of the parts.
• Find on the Internet and constantly use feeding and cutting speed calculators, determine the lower limit of the number of revolutions per minute, take into account the features of the mills of different types.
• The calculation should take into account the strength of the workpiece for bending, refinement of the chips, different options for operating modes.
• Use milling mills with titanium dioboride coating. They are wear.resistant and designed to work at high speed. The coating eliminates the sticking of chips and heating. You will not have to regret the money spent on an expensive cutter, you can work faster and without the risk of premature wear of the tool. Remember: if you process an aluminum profile, cutters made of high.speed steel (as well as cobalt) will not work.
• The cutting tool of smaller diameter (up to 6 mm) will significantly increase the number of revolutions per minute.
• Be attentive to the accumulation of chips in the working area and remove it in time.
• Extracting shavings from deep holes and grooves is extremely difficult. It is necessary to do a deep cut not immediately, but in several tricks, it will be easier to remove waste and avoid damage to the tool.
• The lubricant-coolest liquid will also help to avoid sticking chips, and at the same time cool the workpiece and the cutter. Use the sprayer!
• Maintain optimal feed speed. At too low speed, the tool will wear out stronger and cut worse. Use one and double-toothed mills. They have a fairly large space between the teeth, and they are not so quickly clogged with shavings.
• Do not turn on the machine for maximum power. This will lead to a decrease in the quality of the cut and a rapid breakdown of the milling.

note! Multi.tooth cutter (four teeth or more) aluminum profile cannot be cut!

Methods and devices for cutting aluminum

[Aluminum cutting can be performed according to various technologies] that are applied to the material, depending on its technical parameters and the volume of upcoming work.

For example, if the thickness of aluminum sheets is minimal, you can process them with ordinary metal scissors.

But with large and daily volumes of work with the need to make a large number of cuts, it is appropriate to apply other, more serious types of devices.

Depending on the thickness of the metal sheets, an angular grinder, milling or hydro.carbraise installation can be used for their cutting.

Also, work can be performed using guillotine or plasma cutter.

For very high.quality serial cutting of aluminum, a CNC machine is used. numerical control.

Based on this, it makes sense to consider each technology of cutting aluminum separately.

Features of plasma cutting aluminum

Aluminum plasma cutting. ideal option to get high quality cutting of non.ferrous metal.

At the same time, only inactive gases are used for the formation of plasma necessary for the processing of aluminum sheets and its alloys: hydrogen, argon or nitrogen.

Active gases, such as air and oxygen, are designed to form plasma for cutting black metal.

With the use of compressed air, aluminum and aluminum alloys are treated with plasma cutters, provided that the thickness of the products does not exceed 70 mm.

It is not recommended to use a gas mixture combining nitrogen with an argon for plasma cutting aluminum, as it is designed for cutting 50 mm highly alloyed steel.

The use of pure nitrogen gas is possible for cutting aluminum with a blank thickness up to 20 mm.

But nitrogen in combination with hydrogen will allow you to treat aluminum and its various alloys, with a thickness of 100 mm.

Argon gas with hydrogen can be used for cutting aluminum materials, with a thickness of more than 100 mm.

At the same time, hydrogen in argon gas should not be more than 20%, that it is good to affect the stability of the burning arc.

Features of plasma cutting aluminum

Aluminum plasma cutting. ideal option to get high quality cutting of non.ferrous metal.

At the same time, only inactive gases are used for the formation of plasma necessary for the processing of aluminum sheets and its alloys: hydrogen, argon or nitrogen.

Active gases, such as air and oxygen, are designed to form plasma for cutting black metal.

With the use of compressed air, aluminum and aluminum alloys are treated with plasma cutters, provided that the thickness of the products does not exceed 70 mm.

It is not recommended to use a gas mixture combining nitrogen with an argon for plasma cutting aluminum, as it is designed for cutting 50 mm highly alloyed steel.

The use of pure nitrogen gas is possible for cutting aluminum with a blank thickness up to 20 mm.

But nitrogen in combination with hydrogen will allow you to treat aluminum and its various alloys, with a thickness of 100 mm.

Argon gas with hydrogen can be used for cutting aluminum materials, with a thickness of more than 100 mm.

At the same time, hydrogen in argon gas should not be more than 20%, that it is good to affect the stability of the burning arc.

Features of hydro.carbonated aluminum cutting

Using aluminum cutting with plasma cutters according to hydro.carbaric technology, you can get the necessary blanks with excellent cut quality, with the average roughness parameters.

Hydrobrazic cutting of aluminum occurs with minimal losses, despite the thermal conductivity of aluminum, is a fire and explosion-proof.

Hydroabrase aluminum cutting is based on the use of specially purified water and abrasive grains in the technological process, the category of which is selected taking into account the characteristics of the processed metal and the type of work (under what conditions are carried out).

Under the influence of water.jet technology, it is possible to cut metal materials with a thickness of up to 300 mm, which allows you to combine thin.leaved products into a total packaging and process them in one stage.

In addition, hydro.carbraise cutting of aluminum material and its alloys makes it possible to perform high.precision cutting of products with complex shapes.

And this means that a qualitative result can be achieved even with the formation of internal radii, bevels and sharp corners.

Hydroabraseic cutting. environmentally friendly technology, distinguishes its lack of dust, chips and chemical microparticles.

If necessary, serial cutting of aluminum, use a hydro.carbonated machine with CNC. Practical software does not require the intervention of the operator in the workflow.

In this case, the cutting of the metal occurs strictly according to the given program.

The most suitable cutting tool

It is extremely important to arrange when cutting aluminum protection against shavings. The fact is that, regardless of the cut (straight or figured), chips can cause significant damage to the master.

To prevent them from happening, the tool should have protection against chips, and the master. by personal protective equipment: special clothes gloves plastic glasses.

The implementation of an aluminum cut

The bottom line is that aluminum is a rather soft metal. If we are talking about a large thickness (aluminum slabs), it is recommended to act as follows. Using a cutting tool along the cutting line, it is necessary to carry out several times.

Only in this way it becomes possible to cut off the metal evenly and qualitatively. Otherwise, when cutting in a “one sitting”, an active organ of a cutting tool may get stuck in the metal.

In the worst case, this will lead to the grass of the worker. In the best. the metal section will be technologically disgusting and will require additional processing. And this is an increase in time.

At the same time, do not forget that it is recommended to apply oil, paraffin or aviation kerosene to the place of the cut. This will avoid overheating of metal in the cutting area.

As a result, a perfectly even cut will be obtained, regardless of the configuration. Thus, thanks to the qualitative approach and the use of a specialized tool for cutting aluminum sheet/stove, it becomes possible even in a garage workshop.

The video will demonstrate the use of various BOSH files for aluminum cutting: