How to cut ceramic tiles for walls. Tile cutter in the form of forceps

Than and how to cut porcelain border at home

Unlike ceramic tiles, cutting porcelain tile is not so simple, especially at home. The problem is that it is much more firm and dense material. What tools can be used to solve this problem? Below we will consider how you can cut a porcelain tile using manual tools or electric devices.

Porcelain stoneware is made in industrial conditions from mineral crumbs and various additives by double pressing and high.temperature firing. The result is a heavy and dense finishing material with a low level of porosity. All these characteristics provide him with very high strength and duration of operation, but, on the other hand, create difficulties for processing porcelain tiles. In addition, the surface of the material often has a texture to achieve anti.slip properties and decorativeness. This is an additional test for a hand tool, since many manual tools for cutting ceramics and glass are able to cope with smooth materials of the middle plane.

Ceramic tiles, on the contrary, are often smooth, thinner and lighter, with an average level of porosity. It breaks easier, tolerates mechanical loads worse, but it is easier to cut it when laying. Thus, cutting porcelain tiles is much more difficult than tiles, and not all tools are suitable for this.

Tools for cutting porcelain tiles

Obviously, it is better to use specially designed tools for cutting porcelain tiles. But there is not always such an opportunity, especially if you need to perform a limited volume of work and buy electric tile cutter for especially durable materials is inappropriate.

For cutting porcelain tiles for household purposes, cutting elements with diamond spraying are suitable. The optimal solution is diamond wheels for corner grinding or electric stump.cutter. It is very difficult to achieve a neat cut line with manual tools.

Below we will consider suitable tools. from the simplest to more complex specialized devices.

Glass cutter

This is the easiest manual tool, but, unfortunately, not very suitable for porcelain tiles. He copes well with glass and ceramics with a thickness of not more than 10 mm, but does not cut thick and dense materials.

The tool consists of a diamond cutter, winning or a special alloy fixed on the handle. The edge when cutting porcelain tile glasses is usually uneven, so glass cutter is not recommended in cases where it is important to get a neat cut.

note

The glass cutter will not be able to cut a large amount of porcelain tile, it can only be used if you need to cut one or two non.thick tiles of porcelain tiles in a straight line.

Manual tile cutter

This is a special mechanical tile cut. The design of manual tile cutter includes a carbide cutter, lever mechanism and guides. The built.in square allows you to accurately measure the tile and choose the desired angle of the cut, and a special platform helps to move the material evenly along the cut line. The tool is suitable mainly for working with ceramic tiles, as well as porcelain tiles of small thickness.

There are devices of various modifications:

note

When choosing a tile cutter for porcelain tile, it is extremely important to focus on the quality of its cutting surface, materials from which a lever, moving nodes, a platform is made. Models of the lower price segment from dubious manufacturers are unlikely to cope with dense and thick porcelain tiles and quickly become unusable.

Electric tile cutter

A specialized electric drive device for flat and quick cutting of tiles and porcelain tile during repair and final work. As a cutting element, a diamond disk is used. Cutting is carried out in a wet method. the water is supplied from the hose from above or poured into the tank under the statin. The liquid provides high.quality diluting and cooling of the cutting element.

Corner grinder (angular grinder)

If necessary, porcelain tile can be cut with a hand.made hand.grinder of low power. For cutting porcelain tiles, you need to choose a disk for an angle grinding machine with diamond spraying. Cacks for concrete and stone for this purpose are unsuitable. Suitable as continuous diamond discs for wet cutting, which are periodically moistened with water for cooling, and segment. The optimal disk thickness for this type of work is about 2 mm.

To begin with a little theory

Ceramics in itself. rather fragile material. But the glaze, which is covered with facing tiles. on the contrary, is quite strong. It not only creates a decorative coating, but also strengthens ceramics.

Accordingly, in order to cut ceramic tiles, it is necessary to loosen the glazed coating. To this end, a continuous scratch is applied from one edge to another.

With a high tension at the beginning of the scratch (at the time of pressure on the tile), the thin glaze cracks exactly along a given path. And with her. all ceramics.

How can you cut the tile

There are actually a lot of ways. And it’s good that there is a lot. Because every master can choose the most suitable way for himself, depending on the situation.

With the help of a nail

Cutting tiles with a nail is, of course, a rather exotic way. However, he is a worker. To cut one tile, one nail is enough.

If you need to cut several tiles, then it is advisable to use several nails or one, but the best. But in any case, you will have to periodically undermine it, since do not forget that it is made of low.carbon steel.

Using glass cutter

Most often for cutting tiles manually, glass cutter is used. The principle of cutting is the same as in a tile. Unlike a nail, it does not need to be grinded, because the cutting video is rather hard.

If you purchase a tile, there is no way, for small volumes of glass cutter, it is quite a working option.

Using a tile cutter

Titty cutter is a faithful assistant to any tile. The design of the tool allows you to perform both cutting tiles and its broken.

The basis of the tile cutter is the bed, along which the rib passes in the center. it concentrates the voltage exactly along the cut line so that when pressed the tile breaks exactly where it is necessary.

The supports are fixed along the edges of the bed, on which the guides are held.

Typically, guides are a couple of round rods. the carriage moves along them on plastic bushings or bearings.

Also, the guide can be one. in the form of a rail, and the carriage in this case moves only on the bearings.

A cutting video, a clamp (or a paw) and a lever that performs two functions are attached to the carriage:

With the help of a sheath for a hacksaw

This method is not as popular as the previous ones, but it can also be used to cut tiles.

In this case, a canvas for a hacksaw for metal acts as a cutting tool. But not ordinary, but with carbide-wolframic spraying.

Such a canvas can easily not only cut ceramic tiles, but also cut a full.bodied brick.

Why cut tiles

The tile is laid in a variety of ways: vertically, diagonally, with alternating tiles of different sizes and even with the creation of an image or ornament.

The more difficult the styling, the more often the master has to cut the tile to get the desired.

Well, cut the tiles with diagonal styling in any case.

Most often performed using an angular grinder.

With a small amount of work, the cut is performed manually, with bites.

At home, such work requires a combination of manual and electric tools, and the result is not guaranteed.

How to cut a tile

All cutting tools suitable for this purpose are divided into 2 categories.

Hand tool

Manual. when used, the master makes some physical effort.

Manual models are compact, easy to use, attractive in price.

However, for a large amount of work, they are not adapted and with their help complex operations cannot be performed.

Hand models include the following products.

Glass cutter

This is the most modest in size representative of the cutting tool.

Cutting is carried out in 2 stages: first, glass cutting is made a deep furrow along the breakdown line, and then the tile is broken.

Diamond glass cutter is used by professionals, since you need dexterity to work with it.

Lmaz applies a high.quality deep scratch with only one point.

The rest of the faces only scratch the tile, and the breakdown turns out to be uneven;

In addition, steel does not cut Gress, only diamond glass cutter is suitable for cutting the latter.

Plescakes-plug-seams

A metal video is fixed on one side of the nippers, on the other, a transverse plate is placed.

Suitable for cutting plates, and allows you to perform a curved cut.

A large amount of work with their help will not be able to perform.

Mechanical tile cutter

Models are diverse: with 1 or 2 guides, with a sharp “from yourself” or “to yourself”, designed for different dimensions of the tile.

Household tiles are used for cutting ceramics with a thickness of not more than 1 cm.

Professional can cut porcelain plates up to 20 mm thick.

The main advantages are the accuracy of the cut and the ability to perform a large amount of work.

Teling cutter is not suitable for cutting relief ceramics.

It is also impossible to cut off strips with a width of less than 15 mm with it with it.

Power tool

Electric tool. allow you to perform a very large amount of work in a short time.

In everyday life, they are less common, since the cost of the power tool is noticeably higher, and use is more expensive.

For cutting ceramics, apparatuses are most often used that can perform several operations.

Electric plane cutter

An important advantage. it cuts tiles not only on straight lines, but also on an arbitrarily difficult.

The accuracy of the cut is very high and does not depend on the thickness of the material, or on its strength.

Corner grinder

Corner grinding machine. power tool with an abrasive circle.

Its original purpose is the processing of joints.

However, the corner grinder is used for metal cutting, and for end processing of pipes, and to fit ceramic tiles.

For the last incident, you need to install a cutting disc for concrete and tile with a diamond edge.

Corner grinder can be used when cutting a relief tile.

All the above models do not perform such an operation.

Drill

This is the best way to get a round hole of the desired diameter.

To drill tiles, crowns with a carbide tower are used or with continuous diamond spraying.

Macro-cutting machine

By design, it is close to an electric plane cut and works with ceramics of any kind and thickness.

The main difference is the water cooling system, which at the same time solves the problem of dust and chips.

On simple devices, the tile supply during cutting is manually adjustable.

On expensive professional machines, the entire process is programmed.

Industrial equipment includes hydro.carbonated and laser machines.

In the first case, cutting is carried out due to the flow of water with the smallest abrasive particles.

In the second case, a laser beam works.

Such machines can do jewelry cutting along the most complex contours.

The better to cut?

The choice of cutting tools largely depends on the structure of the material that is planned to process. Today, manufacturers of finishing tiles produce several types of tools that have different technical parameters.

The processing of facing tiles can be carried out by various mechanisms. Each of them has a specific accuracy of cutting, as well as the quality of the rub. Therefore, it is important before starting work with this material to decide which tool you will need to process tiles.

Many mechanisms are not able to process the surface without chips. Therefore, in most cases, auxiliary devices for grinding surface are also used.

Hand tools

Very often, tile processing at home is required where there is no professional tool. In such cases, you can safely use several manual devices that can easily cope with this task.

One of the most affordable and popular tile cutting products is glass cutter. It should be noted right away that it can process not very solid materials. Great for ceramic tiles. This is due to the fact that the product from above is covered with a peculiar protective layer, which is easy to destroy with glass cutting.

Working with this tool is quite simple and consists of several consistent operations:

• Before sawing, you should place the tile on a flat surface. Then on the upper decorative layer there is a fishing line for a cutting trimmer.
• Having placed a metal ruler along the line, it should be carefully carried out with glass cutter, not much pressing it into the material. After that, you need to tap slightly along the cut.
• To break off the piece correctly, you should place it on the edge of the table. The cutting line for the cutting of the cut is combined with the end. Then you need to press slightly on one of the edges of the tile. Do not do it too much and sharply, since you can break the product in the wrong direction.

Another popular tool is manual tile cutter. The principle of its work is very similar to the previously described processes, but only the design is already equipped with a special frame. You can cut more solid tiles with this mechanism. A qualitative tool is able to cope with relatively non.wealing porcelain tiles.

The technology of manual tile cutter consists of such successive actions:

• Initially, on the surface of the tiles, a fishing line is drawn for a cutting cutter using a pencil or marker. After that, the product is fixed in the device with special clamps. Here you need to accurately combine the fishing line for the trimmer of the cut and the trajectory of the movement of the blade. If this is not done, then you can get a curve element.
• To cut off the piece, the blade is pressed to the tile, and with the help of the handle it is carried out through the material. The pressure should be moderate so as not to destroy the tile of premature. When performing cutting, it is advisable to constantly monitor the position of the knife, which should move exactly along the intended line.
• The tile break is carried out in the same way, as described in the algorithm for the use of glass cutter.

If necessary, remove small areas on the tiles, you can also use standard nippers. They do not allow to get even and beautiful edges. They can be used when you need to form a hole for a water pipe, but at the same time the tile itself will be hidden.

But they will be located only on the end side of the product.

A manual tool is used in most cases to solve simple problems. With their help, you can even cut small squares or rectangles with a strong desire. But they will be located only on the end side of the product.

Electric

Cutting finishing tiles very often requires the speed and quality of the processed surface. In some ways, this problem can be solved using electrical tools.

The simplest of them is electric glass cutter, the work of which is almost similar to a manual analogue. But at the same time, it allows you to achieve a better cut, which minimizes the likelihood of chips or cracks.

You can also cut the tile with an electric tile cutter. Outwardly it resembles a small circular saw. There is a small bed along which a cutting disk moves.

The technology of working with such a tool is quite simple and involves the following sequence of actions:

• Marking. It is important to observe accuracy and take into account the thickness of the saw, which can take several millimeters.
• After that, you need to start the device and slowly put the tile to the disk. Do not combine these parts abruptly, since the rapid entry of the saw can lead to the breakdown of the product. For cutting, you should slowly move the workpiece along the marked line. If the disk is located on the machine from above, then you can cut with its help relatively simple figures.

Oblique lines and curly edges

Very often, tiles are laid in non.standard rooms. Therefore, it is necessary to cut it not in a straight line, but to form a more complex shape than a rectangle. Oblique cutting can be performed by almost any previously described tool.

The technology of cutting such non.standard products consists of such consistent steps:

• First of all, you should accurately and evenly break the tile into several figures. The main thing is that the final result can be adjusted to a specific place of installation.
• Cutting is performed by corner grinding, tiles or other tools. If you need to cut along several lines, then the best option will be the tool that completely cuts through the entire thickness of the tiles. The material is not processed to the end of the lines so that chips do not form. When all the elements are cut out, you should just carefully break off or knock out an extra piece.

As for the formation of complex figures, then only hydro.carbonated cutting will help you here. With its help, you can process almost any tiles with both spraying and classic. If you need to remove the chamfer, then special machines are used for such purposes that are equipped with the corresponding in shape circles. In this case, not only the angle can change, but also the shape of the end.

Figure thread

To go around pipes, shells, toilets and door platbands, it is necessary to cut out semicircular cuts. At home, this can be done in this way:

• With the help of a ballerinka and a tripod for a drill. The diameter is limited by the rod and manually set. The resource of one device is enough for 20-30 holes in the tile.
• For bends of small diameters, you can use the nippers. This method allows you to make not only semicircular cuts. The cut should start from the edge with a minimum step. Both of these methods require certain skills to work with the tool, but even in this case it will not work to achieve even edges, additional processing will be required.

The use of any method of working with tiles is due to the need to purchase an expensive tool. In the case of work, small in volume and not requiring cutting of particularly complex patterns, you can use the available devices.

Other tile cutting tools

You can cut off the tile without tile cutter using: hand glass cutter, electric cutter, hand.lobby, angle grinding machine (corner grinder), penetrator, drill, screwdriver, ring saw (crown). Let us consider in detail some of them:

Figure breakdown

Cracking of ceramics on slices for mosaics. This unpretentious type of “cutting” has many advantages. The mosaic will help create the uniqueness of the decor, realize your creative impulses with a minimum of expenses, and the remains of unnecessary or chopped tiles will be destroyed instead of disposal.

We lay ceramics on one part of the canvas, cover with the second half and apply light blows from above. Do not be zealous, otherwise it will turn out too small pieces.

Glass cutter

Cutting tiles with glass cutter. One of the most budget options. You will need:

• glass cutter;
• Marker or pencil.

• Put the tiles on the flat surface and make risk (markup).
• With one hand, firmly press the tile to the base. We hold the glass cutter as a ballpoint handle, tightly press it to the surface and make a cut on the marking
• Under the tile at the cutting site, substitute a metal dowel or a nail. Press on tiles simultaneously on two sides of the cut.

Result: even cut. The edge is easy to bring to smooth condition with sandpaper.

Electric

Cutting tiles using an electrician. In this way, you can cut the details of both simple and complex configuration, in addition, the universal tool itself is found in many. Additionally needed:

• saw or ceramics saw;
• finished pattern.

• Apply marking to the surface using a prepared pattern.
• We make a cut in the direction of ourselves. We move the jigsaw evenly and without haste.

Result: Low performance is suitable for a small volume of work. Ideal for cutting parts of complex configuration.

Advice! If the circle or part is not located at the edge of the tile, first we drill the hole close to the contours of the picture (inside or outside, depending on the figure) to insert the file through the hole.

How to cut ceramics with a hand jigsaw? This tool is convenient to perform figured cutting of any complexity. The result will be accurate, as when using an electrician.

If the “part” is located far from the edge of the tile, then first we make a hole with a drill, for this we use a drill or nozzle for ceramics. The size of the hole should be such that a saw (string) passes through it). We reinforce the string from one edge of the jigsaw, stretch through the hole and fix it again. When working, the jigsaw move towards yourself.

Advice! It will be easier to saw if the tool handle is left on top.

Corner grinder

We work with an angle grinding machine (corner grinder) or “corner grinder”, as the tool is more often called in everyday life. With this tool, you can quickly perform a straight cut, curly, curved, make holes of different diameters without using a crown.

• corner grinder of any power and any type;
• Vise or clamp for fixing parts;
• Cutting circle (disk) Diamond or stone disk:

• A turbo disk is used for a rough cut, if the same type and fast work is needed, for example, direct cutting. Chips and other defects that are formed during cutting are overlapped with skirting boards, platbands, threshold or other tiles. Result: high performance, but with defects on the edge.
• Solid diamond disk of dry cutting is used for thin cutting. In this case, you will get a flat and clear edge. Microskols are eliminated with light grinding with sandpaper. Result: even aesthetic edge, but low performance.

The sequence of work and the technique of execution:

• We risk a sharp tool or mark the surface with a graphic pencil, a marker on the front and reverse side.
• We put the tiles on a flat surface: workbench, table or floor. If you carry out the work on the floor, then lay the flat board to avoid damage to the floor surface.
• If we perform gross cutting, then one pass is enough. We move the corner grinder in the direction of ourselves. If we perform thin cutting, then in one pass, you should not deepen the 3 mm disk. We work with a disk in the direct and reverse direction, that is, first we move the corner grinder in the direction of ourselves, reaching the edge, move to us.

Advice! In both cases, we keep the disk under a slight inclination to the ground cut, then possible chips will remain on the opposite side. If you keep the disk at right angles, then chips will be on both sides of the cut.

Important! Try to work inside the circle, retreating 3-5 mm from the drawn line. When working, the disk brings a little, if the disk is carried out along the line, then the circle will turn out to be larger diameter.

Round holes

Round holes can be made by several tools:

Let’s start with the pea. A drill or a screwdriver is also suitable. Neither the sequence of work or the technique of execution will change from this. You will need:

• Peorator;
• Ceramic drill;
• concrete drill if further concrete work is planned;
• Carbide-wolf crown.

For small diameter holes, the drill on ceramics is used, or as they are called in everyday life “feather on the tile”. Such cores delicately process the surface, scrape the upper icing and wash ceramics into powder. The result is a neat hole with even edges. First, work at low speeds so that the drill is hooked on the outer layer of the glaze and does not damage the surface. If the next stage of work involves drilling a concrete wall under the dowel, then a drill of the same diameter is inserted into the peorator.

Useful life hacks:

Regardless of the method and type of cutting, safety measures should be observed. A tool with sharp cutting elements and brittle tiles are a danger if you work carelessly. During work, unforeseen schisms, dust formation, and sharp fragments of tiles are able to cut hands or get into unprotected parts of the body. Before work is required:

Manual tile cutter

During cutting tiles, many use manual tile cutter, as this is one of the most convenient options. He is of high quality and inexpensive at the same time.

Manual tiles consists of the following components:

• support (it is also the basis);
• the guide part of the structure;
• a cutting element consisting of a roller and a cutting disk;
• lever.

The optimality of the option is as follows:

• Due to the simplicity of the design, it is easy to use;
• The handle that moves the carriage with the cutting disk acts as a lever;
• Thanks to the laws of physics, the incision force decreases;
• allows you to make an accurate cut.

But this tool also has its disadvantages:

Safety precautions

During the use of tile cutters, it is important to study the safety rules inherent in any such tool:

• Before starting work, you should study the subject, see if there are breakdowns or other damage;
• The carriage should go unhindered, smoothly and without pushing;
• Pipe.shaped guides should not contain pieces of tiles, traces of the solution and other garbage. After cleaning, they should be lubricated with machine oil;
• The disk for cutting tiles should easily spin around its axis and not contain burrs;
• To avoid injuries, it is advisable to use special glasses and protective gloves.

Basics of thread

Before you start cutting the tile, you need to re.check the calculations, and draw a strip on the tile. Cut is made in this strip. It is better to draw a fishing line for a trimmer with a marker, so it will not be washed, and you will definitely follow the direction of movement.

We fix the tile, clearly fixing it on the tool. There are designs that have seizures with special layers made of rubber. In other cases, you will have to cut off part of the tiles (diagonally). The second half must be held with a hand. However, there is nothing complicated in this. During the cut, you need to measure the pressure exerted by your hand on the handle.

If you attach too much strength, then the decorative layer can easily deteriorate, and if very few, then you will not be able to make a break in tiles. You can’t go through the tile tool twice.

For training, you can use previously broken material. Having fixed it, you need to lead a carriage on yourself. So you can easily decide on the power of the required pressure. The cut should be made in one movement, otherwise you can damage the decorative part of the tile.

After the cut is performed, the tile should be put on a smooth surface, the fishing line for the cutting trimmer should match the edge of the surface. With one hand holding the tile on one side of the cut, on the other. we crush.

If everything is done correctly, then the tile should break exactly along the line. Above it was told how to work properly with a hand tile, below. we will analyze its electrical version.

Electric tile cutter

Not everyone has such an electric device, and many are interested in how to use it. Electric tile cutting is similar to the circular due to the identical location of the rotary head, engine, support and disk. They are distinguished only by the fact that in a high.quality electric tile cutter there is dishes with water below. Due to this, the disk is cooled during the cut and the dust decreases.

Positive quality of electrical tile cutter:

• It allows you to make a perfectly even section;
• the minimum number of chips formed;
• allows you to cut the tile at a certain angle;
• almost complete lack of dust;
• The possibility of cutting small parts.

Safety regulations

We must not forget about safe behavior when working with an electric device.

• The work should be performed only in special glasses;
• Before starting work, it is worth paying attention to the disk, which should be sharp enough and rotate evenly;
• If there is an incomprehensible sound or sparks, the equipment should be disconnected from power and attributed to the service center;
• Check if there is water;
• You can start cutting only after the disk gains maximum revolutions.

Tile cutting

The main feature of the tool is that it is elementary simple. It must be installed so that the disk is directed exactly along the line drawn for the cut. The tile must be directed, holding, not forgetting that the first touch should be quite easy. Next, a little effort should be made during tile promotion.

If you serve the tile manually without fixing it, you must ensure that the vibration is absent, as chips may form.

Important: in order to increase the time of the disk, you should periodically replace the water during threads, especially if you have a large amount of tiles. During cutting on both parts of the tiles should be pressed with the same force to avoid skew.

Life hacks of the finisor. how to professionally cut different types of tiles

Tile work. work is not easy for beginners, requiring thoughtful preparation. In addition, it is important to find an individual approach to the varieties of material to reduce waste, and therefore the financial costs of the customer.

Tile cutting formula without prejudice to material

Considering the topic of how to cut tiles correctly, professional tiles are based on general principles.

The material must be carefully cleaned. It should not have traces of tile glue, dust.

The work involves dust formation, therefore they advise you to wear protective eyes for the eyes.

Using a hand tool, you can not overdo it. Otherwise, the broken tile is guaranteed. Having selected the power tool, you need to act confidently, clearly, but neatly.

For a spectacular resolution of the problem, cutting tiles at home, the construction environment offers different modifications of tools.

That the main thing in the operation of different units associated with the tile sharp?

It is better to work with glass cutter. expert opinion

I answer, cut the tiles, first select the right glass cutter. It is presented in the market with three variations.

Roller glass cutter. is used most often. The advantage is a thin clear fishing line for a trimmer.

The oil type model works similarly, providing cutting without damage. Thanks to the clock, the task can be performed easily and quickly.

Diamond glass cutter is more intended for an experienced craftsman, since there is a great risk of getting uneven edges. In the case you will need a “strained” hand.

A competitive technical advantage of the means is the possibility of cutting not only in a straight line, but also figured cutting of tiles is quite aesthetic. Glass cutter is used when working with tiles, ceramics.

Recommendation! For porcelain tile, hand glass cutters, electrolobsics are better not to use. They can be used as an additional tool.

The tile must be placed on a geometrically even surface, removing small particles of dirt, glue. When performing the line, you need to make efforts. The outlined edge is removed with nippers.

Advice! Approaching the line planned by the glass cutter, the nippers should grab small fragments. If you use the “big step” plots in the department of the almost cut part, there is a risk of going beyond the edge of the line and ruin the appearance of the product.

An important point remains: cutting ceramic tiles you need to completely wrap the glass cutter and keep it strictly perpendicular. Sometimes the master can be difficult, because often such tools are more used by professionals for thin types of tiles.

At a construction site where the deadlines are running out, the foreman is in a hurry, the cutting of ceramic tiles is faster than the corner grinder is carried out. But you need to know certain tricks with her.

Basic methods of cutting corner granite grinder

This type of tile is the hardest. It is wear.resistant, suitable for public premises. Deciding to cut porcelain tiles should be based on two methods.

The evenness of the line when using a corner grinder depends on the correctly selected disk. Two paths are possible here when choosing discs.

Continuous discs are applicable in the case of “wet” cutting with water to cool the tool and reduce dust. It is appropriate to use them in working with tiles.

Deciding to cut porcelain tiles at home, it will be appropriate to contact a segmented disk that suggests a “dry” method of processing. But it is not recommended to cut more than 2 minutes. We need to take a break.

Using a standard corner grinder, representatives of the construction sphere do not advise buying disks with a thickness of less than 2 mm. Before each procedure, checking the state of the disk for the information appearance of the chip to zero is required.

The specialist marks the future cut with a marker, placing tiles on a prepared flat surface. It is better to fix it on a workbench. Cutting is carried out on the front side. In some cases, it makes sense to make a double cut. From the “face” to the product is slightly pressed, conducting a fishing line for a trimmer, the main cutting is carried out from the end part. This secret answers the question of how to cut the tiles of a corner grinder without chips, without losses for the owner of the room.

Proven methods of cutting ceramic tiles with a tile cutter

Ordinary ceramics for the bathroom, for example, is also cut with the participation of a corner grinder. Although at home it is often more appropriate manual tile cutter.

Minimization of the formation of dust, flaws on the tile.

The tool is light, contains a cutting video that relatively quickly carries out the task. The probability of marriage is reduced at times even compared to a corner grinder. Having placed the tile under the paw on the metal platform of the structure, in one motion it is possible to quickly perform the cut. There are several types of manual tiles.

Roller options are quite simple, suitable for standard tiles.

For more solid types of ceramic tiles, mechanical tile cutter with a hard carriage is advised.

To process a particularly durable material up to 16 mm thick, the model on bearings will be the best solution.

To perform a large amount of work, this tool with a system of air and water cooling is useful. What are its advantages?

It is possible to cut tiles at an angle of 45 degrees for the design of the angles between the walls.

Ability to cut a stone, porcelain stoneware.

In the process, the head depth plays a role. Recommended value. 3 cm. The length of the cut, equal to 50 cm, matters. And the power of the motor. Before the execution, you need to make sure that the wheel is fixed, checking its degree of wear.

What useful tips should be taken into account more?

The end of the tile material is sometimes cut at an angle. Using a corner grinder, you should choose a continuous disk designed for tiles. High.quality cutting of tiles under 45 degrees will turn out when installing the product on the rib, starting to grind the rear clay part. Having discovered irregularities, it is allowed to repeat the operation.

Get a smooth edge conveniently contact diamond “turtles” or sandpaper. Professionals also advise using a corner grinder with adjusting speeds to avoid burning of the edge.

The trick from the pros! For maximum aesthetics of the angle, it is not recommended to reach the icing part by about 1 mm. Filigency of skill is determined by the experience of the operator. Passing on the glaze with a tool, the edge is not very beautiful.

Cutting with improvised means

Do not always need to perform a large amount of work. Why spend money if you need to cut off a few tiles. In this case, you can use the following tools:

Important! It is recommended to use a drill with a winning attack. Thanks to it, you can give a deeper scratch to the surface of ceramics better.

How to cut with glass cutter with ceramic tiles? The algorithm of actions is this:

• An extra fragment is measured.
• Marking is applied on it.
• A metal line is superimposed along the line. It is important to do it perfectly evenly.
• It remains to have a one.time with glass cutter or other sharp improvised material along the ruler. In the process, the ruler should be well held. As a result, you get a noticeable scratch.
• The tile is located on the edge of the table or workbench. Scratch on it should coincide with the edge line of the table.
• A strong, confident and sharp movement of the hand should be pressed on the edge of the tile.

The desired piece will break out. It is clear that making a cut perfectly will not work. But you can save money. And after that, just wipe the cut with sandpaper. In addition, if you put tiles in clean water for only an hour, then the cutting process will become better.

note! Some ask whether it is possible to cut ceramic tiles with a jigsaw. Yes, but the cut will not work as high quality as I would like. The use of an electric jigsaw is rational when adjusting the tiles laid in an inconspicuous place. But, there are special saws with diamond spraying for manual or electric jigsaw. This option is allowed.

Complex curly cutting

In addition to standard cutting products in which an even section is made, there is a curly cutting of ceramic tiles. In this case, tiles become useless, as they can make exclusively even cut lines.

One of the common cases of a socket. How to cut a hole under the outlet in ceramic tiles? It all depends on the circumstances. Sometimes it is enough to make a P-shave on the size of the outlet. Another option is to divide two tiles into two rectangular parts and cut them off. In this case, the long side is cut using a tile cutter, and a short. corner grinder. External angles are performed according to the same scheme.

Advice! When marking, it is taken from 1.4 to 1.8 mm per indent from the wall, and 2.5 mm on the grout.

There is another way to perform a P-shaped cutting. For this, any acceptable method is used. For example, the same ruler and glass cutter, to create cuts on the glaze. After which, the excess parts are abandoned, and the edges are wiped with sandpaper.

But how to cut a hole in ceramic tiles under the pipe? It is already more difficult, since there are no straight angles. The hole should be round and even. Professionals use special crowns that have diamond spraying and allow you to quickly make a hole of the desired diameter for a sewer or water pipe.

But what if there are no such crowns? The first option is to use a tile drill or a winning drill. This is not the easiest way, but quite realized:

• Before cutting a circle in ceramic tiles, you need to install the tile on an even and clean surface.
• Marking is applied to the surface of the tiles.
• Drown in the drill are made even holes according to the intended circle. They need to be done dense, the closer, the better.
• Using the same drill, you need to remove the remaining gaps, performing work at an angle of 45 degrees.
• The hole will turn out rude and inaccurate. Therefore, this is recovered with sandpaper and large nippers.

If this hole is made under the mixer or under the units, then you do not need to bother with the alignment of the edges, they will be hidden.

When you need to make a hole of larger diameter, for example, for forced ventilation, a mini-upper grinder is used with a ceramic disk. Again, marking is made on it, and with the help of a corner grinder, two cuts of crosswise are done. After the four even cuts are made between them to form a square. The rest of the edges are bitten off with nippers. Do not immediately bite off large pieces. In the end, everything is cleaned with sandpaper. Another cutting option. directly along the contour of the intended circle of half the thickness. After which the cut is made for the entire thickness of the cross-steal. It remains to break off 4 elements.

You can make a hole using a jigsaw and a special string for it. The tile is placed, a hole is made in it, into which a string for a hand jigsless or a saw on an electric tile is inserted. A hole is made along the contour. It will turn out even and neat.

One of the most popular ways is the use of a drill called a “ballerinka”. The ballerinka will allow the most carefully performing round holes of the correct shape of various sizes.