How to cut the fur with scissors. Disco saw for cutting metal tiles

How to shorten a fur coat from natural fur at home

Mink fur coat is the coveted dream of many women. Owners of this luxurious outfit know that she needs proper care. And even if you do everything right, sooner or later the moment may come when your model will need repairs or get out of fashion or just bore. You decide to change it a little, for example. shorten the hem or sleeve. To do this, you can contact a special atelier, or you can, after reading on the forums of needlewomen reviews, try to shorten the mink coat at home yourself, because it is not so difficult as it might seem at first glance.

So, let’s begin. Prepare the necessary tools: a sharp blade, scissors, thin long needle, strong thin threads in the color of fur and lining, colored threads, thin wash or crayon, ruler or centimeter. First we need to decide on the length. To do this, put on a mink fur coat, fasten all the buttons or hooks, tie a belt, break down. A small nuance, which is rarely mentioned. it is advisable to be in the shoes with which you plan to wear your clothes in the future. the height of the heel changes our posture, and accordingly affects the planting of the product (photo).

Using Portnovskiy pins or soap, mark the necessary length, it is desirable that someone helps you. Removes the fur, lay on a flat surface, completely lay it out, carefully straighten the lining from the gate to the bottom, this is necessary so that the lining does not pull the fur in the future. We disappear the lining, transfer the marked fishing line for the trimmer from the front side to the bottom of the bottom, mark the allowance for the bend of the bottom-3-4 cm, and carefully, trying not to damage the pile, with the help of a sharp blade we cut along the intended line from the Mazra’s side. If the fur coat is insulated with synthetic winterizer or vatine, cut it to the desired length. We also cut off the lining along the marked line, taking into account the allowance for the hem.

Shortening the fur coat. Brief instructions for use

Lay the fur coat on the table with fur down, carefully straighten it from the gate, straighten your hand with your hand. Skop the lining from below. There you will probably meet a heater. It will have to be cut on the bottom of it. this cannot be bent, otherwise it will turn out rude.

Gently cut 3-4 cm of insulation (the data is given from the calculation that the main length of the product will be reduced by 5 cm). It turned out that the length of the lining is equal to the length of the fur coat, however, so that it does not peek out, it also needs to be shortened. Temporary stitches, outline the bottom of the lining.

A special tool is required to work with fur

Work with fur provides for a special tool. In addition to a shoe knife, with the help of which, not scissors, the skin of fur is cut, many other tools are still used. For example, a hammer for smoothing and softening the seams, sticky gaskets of adhesive tapes that enhance the edge of the skin, special needles, a special skill awl, a comb for laying a fur of fur, etc. Small hammer is used when working with fur constantly. Any rude seam is easy to soften, tapping along the edge of the connected seam. With the help of “amplifiers” the edges of the sewn part are strengthened. When connecting parts on a fussy machine, the edges do not stretch them and, in addition, the tape makes them stronger. This is especially important for the seams in the area of ​​the armhole, neck, collar. So that the connecting seam is not noticeable on the front side, a special crest is used.A comb or a brush that pulls out the hair of the fur in the seam and lays them in the right direction.

Working with fur has one important advantage. you can always add a missing piece to any details or replace part of the fur with others. The connecting seam is easy to hide in a thick fur. However, this is the main criterion for the professional level. The selection of fur of various quality and shade of skins is the most important process in working with fur, especially when sewing outerwear. The correct selection of fur will make a fur coat or vest, as if sewn from one large skin, without focusing on the docking of different quality skins. A good master is a skorler, how a sculptor feels fur and sculpts a real work of arts from different pieces, which is why the cost of sewing fur products The most expensive atelier service.

How to sew fur in a fussy car

Furs can be stitched with a manually, but such a seam, there are disadvantages, and a large time of time is required. Professional work with fur provides for the use of a fussy machine, and not one, but several. For each type of fur, depending on the thickness of the skin tissue and the release, the corresponding machine is used. Marking them for convenience is classified from 1- to 5. So, for example, a fussy machine 10-b has a class 3. This means that on such a machine you can sew the skins of sheepskin, nutria, foxes and other furs. But to sew mink skins, the finest dressing, it is no longer suitable, a class 1 or class 2 typewriter is required. To perform a firmware seam by car, the skin at the seam is folded with a hairline to each other, gently tucked with an index finger or awl of the hair inside and sewed the edges of the skin tissue. The needle and threads must correspond to the thickness of the skin tissue, and the color of the threads of the color of the skin. When working on a fussy machine, you should carefully tuck your hair inside. For fox and fox skins, threads are used 0, for thin rabbit skins. 0, 60, for other skins. 0, 50. Skorid seams are smoothed with a knife with a leap.

You can cut the fur only with a special shoe knife on the back of the fur, laid out on a plastic board or outplane. If you cut off with scissors, then part of the fur is sprinkled, and when stitching the skins, the connecting seam will be noticeable.

Fur Product Care

Do not put the balls of naphthalene on the fur or inside the fur coat. Some furs, including people, have an allergy to naphthalin. Protect fur fur coats or other wiping fur. Such small sections of the fur are very old. Wiped and elongated sections of fur on a fur coat appear with constant driving in a fur coat. Natural furs must be protected from direct exposure to various chemicals, as well as spirits. The hairline from this can lose their shine, and leather fabric elasticity.

Cutting metal tiles with scissors for metal

Metal scissors are a fairly simple tool that is used to cut a thin.leaf steel. They allow you to get a fairly flat fishing line for a cutting trimmer, without burrs and “torn” edges.

You can cut metal tiles along, across in a straight line or along a curve line. Based on this, they choose a suitable tool:

Metal hand scissors are quite suitable for non.large.scale work with thin metal profile. We get a cut by pressure on the handle. For this, efforts must be made. With prolonged work, the hand can get tired, the installation efficiency will decrease.

Cutting metal tiles is easier with mechanical scissors with a hinge mechanism. They are more convenient for work, create smaller loads on the muscles. However, it is even better to use them when covering the roof of a small building, as well as for the construction of fences and enclosing structures.

Electric scissors for metal cutting and corrugated board

A more efficient and productive analogue manual is electric scissors for metal. They are also called cutting or cutting down.

The design of this type of tool provides for two blades: one. mobile, the second. no. Cutting is carried out by fluctuations in a movable blade. The number of moves per minute can reach 2500-3000 rpm/min. This indicator explains the high performance performance.

With a similar method of processing sheet rolling, the metal is heated. This facilitates the process of rub. Heated chips falls down and does not fall on the front surfaces. Due to this, you can cut the metal tile without the risk of damage to the front layer of paint.

Cutting off the metal tile in size by electric wizards is not only quickly, but also of high quality. The fishing line for the trimmer of cutting is quite accurate and smooth, without burrs.

Since when laying a roof, one often has to deal with corners and curved surfaces (as a round of a round chimney), the use of electrical cutting scissors is the most rational. Such a tool is also recommended if you need to cut a large number of fragments when installing roofs, decoration of the walls of the construction of fences from a profiled sheet, and so on.

Drape: composition and description, disadvantages and advantages of fabric (photo)

Drape (DRAP) literally translates from French, like cloth. Belongs to heavy fabrics and is a woolen or half.wool dense cloth. Has a complex weave of threads that are produced using hardware spinning.

It is mainly used for sewing warm outerwear, less often hats and other products.

History of occurrence

Drape variety of cloth, which was produced in Russia in the XV-XVI centuries. During this period, one of the main homework was the manufacture of woolen paintings, mainly cloth.

The first cloth manufactory was created by the merchant Fedor Serikov in 1698.

The development of suknodelia was slow, but continuous. At the end of the XVIII century, it gave way to the production of stone, blessing fabrics.

The rapid development of mechanical wool.rowing gives an impetus to a separate industry, which requires special production. And the invention of special weaving machines makes it possible to release drapoy fabrics.

Which has several layers of interweaving, which allows experiments with the main threads and ducks. combine colors, change the pattern.

Manufacturers try to combine wool with other raw materials (cotton, flax), later with synthetics. All this led to the emergence of different varieties of drape.

Compound

It should be immediately noted that a drape is a canvas with a complex weaving interweaving, which uses woolen threads, and both natural and artificial fibers can serve as additional.

The production uses wool of different quality: dear. alpaca or not expensive, but well.known sheep.

Therefore, the composition of drape fabrics is not unambiguous. The percentage of the raw materials used can vary greatly, it all depends on the raw materials used in factories:

• Pureless drapes by 90-100% consists of wool;
• Some firms belong to woolen, material with 85% of the wool, it depends on the norms of the country where drape was produced;
• In semi.haired. artificial threads reach 70%, in them the woolen composition ranges from 80% to 30%.

Weaving

Factories use different methods of weaving threads, it depends on the produced type of drape. The canvas can be:

Fabric with a satin interweaving have a smooth front side, and a satin with a caustic cauldron duck.

One and a half layer are obtained from three systems of threads, and two.layer. of four, sometimes from five. Such canvases are characterized by increased thermal protection, winter and demi.season products are sewn from it.

Additionally, materials can be processed by the strokes (special means), which will strengthen or betray the canvas additional properties: air permeability, water.repellent, etc.D.

In production, weaving pattern can be on one or two sides, the same or different, depending on the interweaving. The width of the drape canvas is 136-142 cm, and the minimum surface density is 500 g/m².

Varieties

In appearance, color, thickness and weight, the drape fabric is divided into:

• thin.dry or rough;
• single.leaf or two.leaf;
• half.wool or pureless;
• light or heavy;
• Blessed or rumored (fluffy, velorov, pressed);
• Smooth.painted or variegated.

Combinations of different drapes divide it into a large number of varieties.

The thin.pierce woolen drape includes:

• drape devasts or doddedam (translated from French as “drape for ladies”)-has a pile surface and linen interweaving, usually has light colors and striped ornaments; Suitable for shawls, shawls and capes;
• drape-era or velvety-they make from thin wool, whipped pile is obtained with the help of fogging rollers and does not have a certain direction; This type of canvas is used for sewing warm winter and demi.season coats, half a wrapper and hats;
• drape-sheet-produced by a plain dense canvas with a satin front cauldron, thin wool is used as raw materials, which is leaned in the process, the pile is cut and pressed, which gives the fabric an attractive light shine; used for sewing men’s coats and ceremonial overcoats.

1937, models: Coat with a carved coquet. Recommended from drama dark colors.A demi.season coat, decorated with short.term fur, from stella drapes, velor, etc.

• drape-ratin-a soft thick fabric with a pile laid in the form of different drawings (Christmas tree, peas, spiral); operated for hats and men’s coats;
• Drape-velor is light (female)-has a short pile and a velvet surface; used as coat material and fabric for sewing hats;
• Drape-Castor (overcoat)-refers to “difficult fabrics”, because it is difficult to work with it and you need to have high sewing skills; Dense and at the same time soft material, has subspecies: merino, overcoat, half.carbon; The main color is dark gray;
• drape dramas;
• drape-Velutin et al.

It should be noted that semi.warded thin.dry drape is produced from semi.nuclear threads of medium quality and reduced norms.

Men’s drape is characterized by high density and restrained colors. While female and childish. lightness, brightness and texture.

Properties

All types of drape have the following positive hygienic and physical characteristics:

• strength;
• incomplete;
• wear resistance;
• color resistance;
• windbreak. thermal insulation;
• air permeability;
• Special density.

The drape is easily combined with other fabrics, which allows you to make excellent collections to make clothing designers.

The disadvantages, include the difficulty in cutting and steaming seams.

Where they use

Each type of drape has its own purpose. The material has proven itself positively in previous years and became universally in demand in 2019. It is used in sewing outerwear and hats. But besides it, there are other areas of application:

How to sew artificial fur-master classes on BurDastyle.ru

Fashion for artificial fur products has been relevant for several years. Thanks to modern technologies, the proposed assortment externally imitates natural fur as much as possible.

Modern technologies make it possible to produce artificial fur of very high quality, which outwardly almost not distinguishable from natural raw materials, so good imitation. In addition, artificial fur is a trend for several years in a row. Many eminent designers are increasingly complementing their collections of artificial fur models.

The material consists of “two” layers. a smooth weed or knitted base and a gorses external side. The woven base of such fur is synthetic, viscose, cotton, wool and even silk. The villi themselves consist of synthetic, mixed or natural textile fibers, for example, sheep’s wool.

The natural components of this textile miracle increase its quality and cost.

From artificial fur, mainly, sew outerwear, hats, accessories, toys and decor items. Artificial fur products are durable, wear.resistant, warm and beautiful. But the main advantage of this material is that you can sew any thing yourself and take care of it at home.

How to cut artificial fur

Use sharp shuttle scissors, sharp stationery knife or razor blade. Cut out from the wrong side (side without pile). Cut the fur in the direction of the pile. when it lays flat, if you run through it with your palm.

When cutting with scissors, cut only the base, without capturing the pile. Gently push the villi to the side with the help of scissors. This method is best suited for cutting small details, because it takes a lot of time.

If the pile is very long, spread the villi with a comb. When cutting out by an office knife or blade, do not use a cutting substrate, as you can cut the pile. Cut the base carefully, without pressure.

At the same time, gently spread the edges of the cut with the thumb and forefinger. Roofs/villi along the sections with the help of a vacuum cleaner.

How to work with artificial fur: basic recommendations

Artificial fur is stuck on a sewing machine with a straight line. The villi on the front side in the seam area is carefully pulled out with a needle.Dense and long.haired fur is cut off from allowances. The details of the product made of artificial fur are not duplicated with adhesive materials.

If there is such a need, then they use non.nee duplicate materials that are acceptable (fastened) to the base from the wrong side.

When using a conventional adhesive gasket, which is glued to the base, there is a risk that the fur will completely lose its plasticity and the finished product will stand up with a stake. Artificial fur is not recommended to iron, since synthetic fibers lose their shape from high temperatures.

But if there is such a need, for example, to smooth the seams, then they do it with a faint, dry iron through a fever. To remove the excess volume from the hem of the bottom, for example, a fur coat, you can slightly iron it.

If you accidentally raised artificial fur with steam and pile struck, then you can return the previous look with a hairdryer and an ordinary clothing brush, best with natural bristles. First, the fur is combed against the pile, and then in the direction of the pile. And so several times.

Allowances for cuts when cutting parts of artificial fur is left 1.5–2 cm. After grinding parts of the allowances, you can cut to 1.5 cm, the pile is cut if necessary. If the allowances stick out, they can be noted to manually.

Artificial fur is duplicated by non.core materials only if the main material is thin and does not hold shape well.

For insulation, use flannel or wool knitwear. You can also use woolen shawls, shaws, sweaters that you have not wear for a long time. over, the flanel in this case performs a double function. both warm and duplicate. Parts from the flannel are cut out with allowances on the seams and manually sewn to the details of fur.

Then the allowances can be cut to avoid excessive thickening in the seams. Fleece for such purposes is better not to use. It is voluminous and does not hold shape. If the product made of artificial fur is only on the lining, then the shoulder and seams along the okat are strengthened with the h/b strip so that the sections do not stretch. The selection in fur coats is rarely done.

often, or without insulation lining is cut right to the edge of the side, and the fur is touched. Less common is a narrow collection, for example, from suede. If the selection of the main fabric, it is better that it is solid.blooded. the seams are less. Details of artificial fur products are cut in the direction of the pile.

Short pile fur is allowed to cut in the opposite direction.

Types of fasteners for artificial fur products

As a fastener, as a rule, fur hooks or hinged loops and buttons are used as a fastener. To sew hooks correctly, first mark the selection, then on this line a cut for a hook. The place of the cut is better to duplicate.

The hook is inserted into the cut opening and sewn from the inside: between the side and the selection, several punctures are made through and through, grabbing the side and selection with several stitches. There will be no stitches in the pile.

Before proceeding to this step, be sure to try the loop on an unnecessary piece, at the same time decide on the size of the cut for the hook.

How to care for artificial fur products

The advantage of artificial fur over natural is the ease of products, ease of care and storage, less exposure to damage, and, of course, the lower cost. Some artificial fur products can be washed in a machine! But only low.hearted and smooth.

Wavy fur and fur under Karakul during washing can straighten up and lose its original appearance, and long villi can be dumped. Therefore, first try to wash a small piece of fur left with sewing, manually and dry.

Washing and spinning only at low speeds at a temperature of 30 ° using modern detergents. The only thing that needs to be added to an ordinary artificial fur washing or product is a double rinse function.

How to cut the fur

Fur cutting differs from the cutting of tissues and skin. The main difficulty is that artificial and natural fur has a pile that should not be damaged when cutting. How to cut natural and artificial fur correctly?

Sort skins from natural fur over a density of pile, pattern on a fur, pile length. Carry out preparatory operations: moisturizing, praise, straightening.

Carefully inspect the fur. Get out with a pen or marker on a mezer those places where the fur has bald patches, holes. Raise the skin opposite the light source to identify all small holes.

Put the skins on the table with fur down. The fur cannot be cut, folding like a fabric in several layers. If you have a few pieces, put them all in such a way that the fur lies in one direction. Long.term artificial and natural fur is covered so that the pile on the product is directed down.

Lay out the patterns on fur so that places with marriage do not fall on the pattern. Remember that if the fur is spotted, then it is better to place the spots on the pattern symmetrically. After laying out the patterns, it is worth over again turning the fur with a pile to yourself and carefully see how the overlapping details will look nearby.

Circle the details. Allowances for seams in the fur are made very small. If the details are stuck in the end, they do not make allowances.

Take small scissors with thin blades or a razor blade and begin to carefully cut out the Mazra by weight. To do this, hold the skin with your left hand, and carefully cut the skin tissue carefully. You need to cut only the skin or woven base (in artificial fur), and simply dividing the fur without cutting.

After cutting the paired parts, put in the fur inward. Remove all the fallen pile. Needles and pins (if you used them) remove from fur.

What is the length of the insulation on the fur coat?

We check again if the length of the insulation interferes. Remove the excess, level the fur coat on the table, and hold the striped strip to the heater sewn to the fur. We close both sides. We straighten the fur coat on the table, and check the length of the lining. If the fur coat is flared up, the lining will need to be sutured on the width of the product.

We do this with the help of a hint from the inside of the lining, in two seams on the sides, then we will drive out by car. Check the lining: there should not be either large folds or tension.

Take the thread in the color of the fur coat, and manually sew the lower hinted strip of fabric to the fur coat, piercing and capturing the fur. Then remove the testing from the bottom of the hem. The lower corners of the side must be sewn by car, and then be sure to comb with a special brush to straighten the villi captured in the line.

How to make a fur coat correctly?

Shorting a fur coat with your own hands is very simple. No need to have special skills to cope with this task. If you are worried that you can ruin the fur coat, contact the studio.

• With the help of pins, make an fitting, apply notes in the right places. Pre.fasten the product for all buttons. Measure the distance between the edge of the fur coat and the bend of the new length.
• Pour the lining. Measure an equal distance from the edge, draw a fishing line for a trimmer of the bottom using chalk. Draw a fishing line for the allowance trimmer at a distance of 3-4 cm. Cut it with a sharp knife. Move small jerks, from left to right. Do not cut the fur with scissors. the edge will turn out to be inaccurate. In addition, this will lead to a sowing of a large amount of fur.
• Bend the allowance with a special needle for fur and skin. Sew over the edge, focusing on the mark made by chalk. Put the product on the table and start work, moving to the right side. As soon as it remains about 10 cm, fasten the product on all hooks, and the floors. fold together. If necessary, adjust the allowance and finish processing.
• Cut the lining, fix it to the allowance center, leaving a little space. Make a fitting that will help to understand if the lining is behind the edges of the fur coat.
• Sew the lining. Put the product on the table, lay the bottom on the bend of your palm, push the fur with a needle, hold your fingers. Moving from right to left, grab 0.8 cm of fur and lining and sew them. Do not tighten the thread too much so as not to damage the product.
• The fur that came inside, carefully spread with a needle. The seam made should not be visible.

The process of shortening the fur coat is simple, but requires attentiveness and perseverance. However, there is a pleasant bonus. you will save money that you can buy a beautiful accessory or decoration for your favorite fur coat.

A fur coat of expensive fur is an indicator of viability and success. When sewing them, they are not used.

For a long time, fur coats emphasized the high status of their owner and.

Mink belongs to one of the most desirable and noble fur products. Luxurious.

Squirrel fur coat is found in modern stores not so often. As a rule, material.

What to wear a kangaroo coat with? What is the Kangaroo fur combine with?

If you want to get yourself a unique fur coat that will not look like.

Palantine is a completely unique accessory that is ideal for creating a huge.

Every representative of the fair sex dreams of a luxurious fur coat that will be.

Exotic furs remain one of the most desired among ours.

They gave you a new fur coat, and it is great for you? Or maybe you just lost weight, and now look ridiculous in.

Mol is one of the worst enemies of a fur coat from natural fur. If she gets to your.

Dry cleaning of fur is a delicate and very important procedure. She is capable of.

If you find that your favorite fur coat has become great, then this is not a reason to run to the store for the new thing

Advantages of a round knife for cutting fabric

Before listing all the advantages of the disc knife, you need to mention its main disadvantage. It is difficult to cut the curved fabric reliefs with a round knife, and it is almost impossible to cut out the suppressed lines so as not to spoil the fabric. For example, cut a rectangular lining section for an internal Performing this operation is highly likely that you will definitely cut more fabric with a round blade than required. Sharp scissors capable of hanging corners, you can’t do here. But then, unlike scissors, a round cutter cuts several layers of fabric at the same time without displacement, which is indispensable with a cut of small rectangular parts, especially for working in the technique of patchwork. Actually, for the patchwork, this knife was invented, but in skillful hands of lovers they began to use it for cutting fabric when sewing clothes.

The roller knife (Cutter) is also convenient because it is light and does not require much effort when cutting the fabric. Therefore, the hands are less strained and almost do not get tired. Find the scissors under the left hand the problem, and the disk knife can be used both right and left.handed.

Equally important is that the round knife is much more acute than the scissors, in any case, rarely who have scissors sharply like a razor, and it is worth sharpening them. And at a round knife, discs change like a blade on a razor, and there is a set of new blades not so expensive. In addition, a round disc can be sharpened yourself, for this, however, you need to buy a special sharpener.

By the way, when buying a round knife, you will definitely need to buy a special plastic rug. The sharp blade of the disk should not touch the other surface. This circumstance can be attributed simultaneously to the disadvantages and amenities, since the rug has a special marking, which facilitates the cut of details. But his price is sometimes not.luminous and depends on its size.

Another circumstance to which pay attention. The rotary knife must be protected from children! His blade is so sharp that even an adult is easy.

Varieties of round disc knives

Rotary knives have several varieties, each of which has certain advantages. The photo shows that the disk of this knife is able to cut the fabric with a zigzag. Good zigzag scissors are much more expensive than a rotary knife. Probably to those who often cut the fabric with a cloud, it makes sense to think about buying a round knife with such a blade.

The blades of the rotary knife differ, first of all, with the diameter. The smallest diameter of the blade. 18mm, then. 28 mm, average size. 45mm and the largest dimeter 65mm. Small wheels (2) are more convenient to use for a cut of small details, crooked lines, such as armhole armholes. A large blade allows you to cut several layers of fabric at once.

The cutters themselves are also different. The cutter under the number (1) and (3) is safer, since the blade is completely hidden. Very convenient, as ergonomic, handles of cutters under the number (4). But the disc knife (5) is able to cut round parts with a diploma from 4 to 22 cm. Under the number (6) the rotary knife of the most ordinary model and two spare discs, offered in the kit. When buying a knife, purchase immediately and packaging of spare blades. The most popular blade size with a diameter of 45mm.

The cutting model (7) is characterized by a very comfortable handle, and the cutter at number (8) has an unusual way to exit the blade. When you press the handle, it appears a blade. Remove the hand from the handle. The blade is hidden, which is important to those who have small children at home.

How to sharpen the scissors. Portnovsky scissors should be cut with tips

How to sharpen scissors if they do not cut? The answer is very simple. You can sharpen the scissors correctly in the workshop where there is a special machine. All other “folk” methods of sharpening scissors are able to only slightly “improve” the situation, and sometimes the scissors are finally licking. The fact is that the blade of scissors should be sharpened evenly along the entire plane, strictly at a certain angle. The slightest inaccuracy when sharpening will lead to the fact that the edges of the plane will unevenly cut the fabric or quickly dull. Technically, this is possible only with the help of a special machine that reliably fixing the scissors at a certain angle. In extreme cases, this can do this, but with a “solid” hand. Otherwise, scissors will be cut only in separate areas, and in indestructible places to chop or tear the fabric.

By the way, any tailor scissors are checked very simple. To check how the master sharpened the scissors, take a piece of the thinnest fabric, such as chiffon or silk. Cut this fabric in one layer, according to a shared, transverse, oblique line, circles. Scissors should easily cut with the whole blade, in any direction, without shaking fabric. If the scissors cut the chiffon tissue into one layer smoothly and easily, including the tips, then they are imprisoned perfectly.

The cause of poorly cutting scissors may be a screw screw

Sometimes the cause of poorly cutting scissors is a trifle, like a weakened screw for fastening blades. This sometimes happens in scissors, so monitor the state of this connection. Not often, and neatly, you can even lubricate this knot. Only the whole “gender. a drop of “oil so that the oil does not leave a stain on the tissue during the cut.

Some models of tailor scissors, instead of a screw, have a rivet. Such scissors do not understand and do not “pull up”. However, the need to “tighten” this mount may arise, since a gap and even well.sharpened scissors may appear between the blades, they will still be badly cut. Ask the master to “pull up” this rivet. He lights her with a hammer slightly with a hammer. You can’t do this yourself. Scissors can easily be spoiled, the blades will hardly move apart, and you cannot use them.

If you are seriously fond of sewing and even more so earn on this, then it is better to buy, even expensive, but high.quality scissors. And it is better to buy not only one, but several and different sizes of scissors.

The correct selection of the fur of the details makes the seams inconspicuous

Working with fur has one important advantage. You can always sew the missing piece to any detail or replace part of the worn fur to others. This is possible due to the fact that the connecting seam is easy to hide in a thick fur. This advantage is the main criterion for the professional level. Selection of fur, different in quality and shade of skins. This is the most important process in the technology of working with fur. It is especially important to be able to choose the right fur when sewing outerwear. The correct selection of fur will make a fur coat or vest, as if sewn from one large skin, without focusing on the docking of the fur sections of different quality. A good master is a skorler, how a sculptor feels fur and sculpts a real work of arts from different pieces. This is why the cost of sewing fur products. This is the most expensive atelier service.

Fur skins can be stitched with a manually, but such a seam, there are many drawbacks, and it takes a lot of time. Professional work with fur provides for stitching fur to use a fussy machine. over, in the “good” atelier, a fussy car is not one, but a few. For each type of fur, depending on the thickness of the skin tissue and the release, the corresponding fussy machine is used. Their labeling is classified according to classes from. to so, for example, a fussy machine of 10.b is a third grade. On a fussy machine of this class, you can sew sheepskin, nutria, foxes and other fur foxes (mezers). But to sew the mink skins of the finest dressing, it is no longer suitable, you will need a skilling machine of the class or class

To perform a firmware seam by car, the skin at the junction is folded with a hairline to each other. Gently tilted with an index finger or awl of the hair inside and sew the edges of the skin tissue. The needle and threads must correspond to the thickness of the skin tissue, and the color of the threads correspond to the color of the skin. When working on a fussy machine, you should carefully tug the hair inside, since not refueling hair can cause a breakdown of the needle, passage of the stitch, etc.D.

In this video you will see how the fussy machine 10b works. Especially for you, we sew two small pieces of fur.

For fox and fox skins, threads are used 0 for thin rabbit skins. 0, 60, for other skins. 0, 50. Skorny seams are smoothed with a knife with a knife, tailor’s scissors or weak tappings of a small hammer.

You can cut the fur only with a special shoe knife on the wrong side of the fur (mezer). The fur is laid out on a plastic board or plexiglass, a fishing line for a trimmer is planned on the leather fabric and cut off with a boot knife, moving on themselves. If you cut the fur skins with tailor scissors, then the hair of the skin is sprinkled. In the future, when you sew the fur, the connecting seam will be already impossible to hide.

Fur Product Care

Do not put the balls of naphthalene on the fur or inside the fur coat. Some furs, including people, have an allergy to naphthalin. Protect fur fur coats or other wiping fur. Even small wiped areas of outerwear fur are very old. Wiped and elongated sections of fur on a fur coat appear with constant driving in a fur coat. Try not to drive a car in a long fur coat. This is inconvenient and easy to ruin an expensive and beautiful thing. Natural furs must be protected from direct exposure to various chemicals, as well as spirits. The hairline from this can lose their shine, and leather fabric elasticity.

In this video, you will see how easy it is to sew the skin on a sewing machine like Podolsk, if you install a Teflon foot on it. If you are fond of sewing, subscribe to my channel.

How to sew fur mittens in order to sew fur mittens not required a lot of fur. The mink can be removed from the collar of the old coat. For sewing fur mittens, a special fussy machine is not required. The connecting seams can be performed with a manual fussy seam.

We sew with our own hands to sew a fur coat or hat from fur at home is almost impossible. Qualitatively, professionally, such work can only be done in a specialized fur studio. The only product that you can try to sew and fur yourself. This is a fur vest.

Recommendations on skin work with fur differs from work with skin, despite the fact that these materials have one common basis. skin. The skin can be sewn on the machines of the shuttle stitch. You can sew fur only with a manually fussy seam or a special fussy machine.

We sew out of old fur. What to make from an old fur coat to buy new fur skins in a store is quite expensive, and you do not always need if you have old fur things, such as a karakuley or muton fur coat. For a long time no one needs a fur coat. This is a whole warehouse of natural fur, which can be used for sewing new clothes.

Sewing threads, which is better? Threads for working with fur do not have the same value as for sewing skin, since they are not used for decoration on the front side of the product. When working with fur, select threads in the color of the color of fur or skin tissue. Do not use too thick threads. It is impossible to break the seam in fur clothes, since the threads of the connecting seam, but the skin tissue will always break.

The tool for working with the skin for working with fur requires not a lot of tools. If you just need to carry out a small repair of fur clothes, sometimes there is enough needles with a thread and the ability to perform a manual skill seam. However, if you are going to sew fur clothes with your own hands, you must not only know how to sew fur, but have the main set of fussy tools.

All Rights Reserved © / 2011 / Sewing-Master.ru / How repair Sewing Machine at Home by Yourself / My-Project

You have a sewing machine and you like to sew? then this site is for you. Professional masters will tell you how to carry out minor repairs of a sewing, knitting machine. Experienced technology will share the secrets of tailoring clothes. Sighting articles will tell you which sewing or knitting car, a mannequin iron and many other useful tips you will find on our website. Thank you for completely viewing the page. Copying and reprinting articles of the Sewing Master site without the consent of the author is prohibited. Copyrights are protected by law.