How to Dress a Reel on a Trimmer Video

Fishing is an entertaining hobby. Beginners strive to quickly learn this skill in order to subsequently have a good catch. First you need to find the right fishing spot, to get the right equipment: fishing rods, reels, lures, fishing line. Before catching you can face one unpleasant problem that can ruin the pleasure.

It’s about winding fishing line onto a reel. If the winding is done incorrectly, the loop can jump off and then, in order to remove the prey from the hook, it will be necessary to untangle the fishing line.

How to reel a fishing line on a reel

Fishing line winding methods may vary depending on the type of reel.

The use of spinning should begin with short rods, where the thickness of the fishing line is not more than 1/3 mm. The winding method may also differ: random winding of Chinese bobbins (suitable for monofilament, but not suitable for braided fishing lines), and a professional version of a straight cylinder, an inverted and straight cone.

It is advisable for beginners to learn the correct winding, which guarantees the best result. If you are tempted by cheapness, then later you will regret it when fishing becomes a constant struggle with twisting fishing line. Such an activity will not be a pleasure.

Fast way to reel fishing line

To make the winding, first attach the reel to a stationary vertical rod.

The main thing is that the line is absolutely flat. To implement a cylindrical winding method, a straight line is needed, for a cone-shaped method, an inclined line. Remember that there should be no bends.

How to practically make an even fishing line? Attach the bobbin to a fixed vertical rod so that it scrolls easily, or ask someone to hold it. The core can be: a needle, pencil, pen, tube, screwdriver, stick.

Securing fishing line with knots

Pass the line through all the rings of the rod. Make a knot at the end. Then you can begin to refuel the fishing line on the reel. First, you should fix it in a circle around the bobbin, having previously raised the arbor of the logger. After you have tied the second Arbor knot, the arc lowers.

The braid line often slips out. To prevent this from happening, you can place a piece of rubber under the attachment zone (which can be a cut fingertip or a glove), it is recommended to use an adhesive plaster.

Getting to winding fishing line. Start turning the handle evenly on the reel. Watch out for fishing line tension. It needs to be supported by protecting hands with tight gauntlets.

Try to ensure that the winding is not completed at the bobbin side level. Otherwise, there may be self-loops, or they will get confused. In order to avoid the development of such a situation, make sure that there is a distance of 1 mm to the side without fishing line. At the same time, if the gap is more than 5 mm, long-range casting will not work. Preventive methods include backing. winding under the main fishing line of the auxiliary, not more than 3/10 mm, so as not to disturb the evenness of laying. Any strings are perfectly used in backing. The only exceptions are nylon thread and cotton (dry for a long time).

The amount of fishing line for backing is determined by experience. There are no regulations regarding this. You will need an additional bobbin, on which we wind the main fishing line, then backing (remember the gap near the side). Then we carry out the attachment of the main mount. We are already wrapping the fishing line in the opposite direction.

How to wind a line onto a reel of video

Fishing line and reel video

We hope after the article and the video materials you now know how to wind the line onto the reel correctly. Successful fishing, stay with our farmer site without hassle, we still have many articles about fishing and fish farming!

How to wind a fishing line onto a spinning reel

Spinning gear should be correctly selected for solving specific problems, in other words, harmonious and balanced. Choosing the model of the reel, spinning, the model and the diameter of the fishing line (braided cord), many anglers do not attach importance to the correct winding of the fishing line onto the reel. This guide will discuss the nuances of winding fishing lines, which will help to avoid unpleasant fishing moments and frustrations from tackle (dumping loops, “beard”, casting distance, shooting). You will also find here step-by-step instructions for winding, setting up the reel and the scheme of the nodes for linking the fishing line to the spool.

Read more:  Einhell Trimmer Remove Mowing Head From Trimmer

Many aspects are analyzed, so it will not be amiss to share the outline of the article:

Winding profile adjustment (taper)

Each coil model has its own winding profile. Distinguish:

  • cylindrical profile (photo 1);
  • reverse cone, where the profile of the wound fishing line expands to the front edge of the spool (photo 2);
  • straight cone, when the profile of the wound fishing line tapers to the front edge (side) of the spool (photo 3);
  • the chaotic profile inherent in cheap Chinese coils.

Spinningists use a cylindrical or lightweight inverse cone. Winding geometry is adjusted using shims.

Shim coils with front friction brake are located on the axis on which the spool is mounted above the ratchet sprocket. The coil kit usually comes from 2 to 6 washers of various thicknesses. With an increase in the thickness of the washers, the winding profile changes in the direction of the straight cone, with a decrease in the thickness of the washers, in the direction of the inverse cone. If there are no shims in the package, then they are already mounted on the axis. It is necessary to consider this moment.

To remove (install) the washers you must:

  1. Unscrew the spool by rotating the clutch counterclockwise.
  2. Remove the spool from the axis (rod) of the coil.
  3. Remove (install) the required number of washers. There were times when you even had to remove an asterisk to achieve optimal winding geometry.

Shim coils with rear friction brake are typically located in the spool itself. The principle of adjusting the profile of the winding line is directly opposite to the coils with a front friction brake. An increase in the thickness of the washers leads to a reverse cone, a decrease of # 8212; to a straight cone.

To remove (install) the washers you must:

  1. Remove the spool.
  2. Unscrew the special nut on the front of the spool.
  3. Remove the lock washer.
  4. Remove (install) the required number of washers.

Using Backing

Bucking # 8212; a layer of something wound under the main fishing line to increase the diameter of the spool so as not to wind a kilogram of fishing line on it.

The many diameters of the lines, various volumes of unwindings on the market do not allow the production of reels with a spool volume for each version of the fishing line used. If the volume of the purchased fishing line is less than the capacity of the spool, then use the winding under the main fishing line. backing. As backing, it is best to use an old braided cord (braid) or kapron thread, however, many people prefer a simple electrical tape. The backing volume can be determined “by eye” with a margin, but in this case there is a high probability of the appearance of an “excess” volume of the main expensive braided cord. It is preferable to add backing to the wound main line to the required level and further rewind. The following nodes can be used to connect backing and the main fishing line: “blood ties”, “greenner”, “Petr Minenko’s knot”, “shok leader knot”. Winding backing finally on the spool is necessary very tightly (with effort) in order to avoid failures of the main fishing line between the turns of backing.

Video: How to Dress a Reel on a Trimmer Video

Binding fishing line to the spool

We will figure out how to tie a fishing line to a spool.

First rule # 8212; binding of fishing line or backing to the spool is required. It is not known which trophy will come across to you and it will be insulting if during fishing, all the main fishing line and backing are unwound, and there will be no last line to hold the fish.

The fishing line can be tied with various knots: “arbor knot”, “self-tightening double loop”, “clinch”. On the first turn of fishing line or backing on the spool, it is necessary to additionally glue a piece of electrical tape or patch in the direction of winding. This will avoid scrolling fishing line on the spool, both during winding and when fishing the fish.

How such knots are tied in practice can be seen in the video:

Read more:  Installing Ignition Coil On Trimmer

How to wind a fishing line

  1. On the first spinning knee, it is necessary to install a coil and remove the spool. The main line must be threaded into the spinning ring and tied to a spool. Before installing the spool on the reel, do not forget to open the handle of the logger. The line must go through the logger roller. If you have a spare spool, then this step is best done with it when determining the backing volume and the initial winding profile.
  2. The reel with fishing line has a central hole, so it can easily be put on a pencil or pen. To avoid twisting, the fishing line should go off the bobbin while spinning it, and not go off in turns with the bobbin stationary. We ask your partner (children are the best assistants) to hold the bobbin with fishing line on a pencil. If there is no partner, then you have to adapt by clamping a pencil with a reel between the knees. You can use special devices for unwinding fishing line from bobbins. They can also regulate the force of winding fishing line on the spool.
  3. With one hand, through a rag or wearing gloves, so as not to cut yourself and burn yourself on the fishing line, we clamp the fishing line above the first ring. With this hand you can adjust the effort of winding fishing line on the spool (as tight as possible, but without fanaticism). With the other hand, we begin to twist the handle of the coil at a low speed.
  4. The volume of wound fishing line should be such that the line does not reach the edge of the spool shoulder 1-3 mm. If the volume of the fishing line is not enough, then we tie backing to the fishing line and continue to wind up to the required volume. Winding fishing line to the edges of the shoulder is fraught with gathering loops, “beard”.
  5. After winding the fishing line and backing to the required level, it is necessary to rewind the fishing line from the spare spool to the main one. With an unsatisfactory fishing line winding profile, you can adjust it by removing or adding the necessary adjusting washers. If there is no spare spool, then for the final winding of the line, you will have to rewind the line either to another reel, or first to one reel, then from it to the second reel. This is necessary to flip the fishing line. For these purposes, you can use a drill, securing the reels in it on the spindle.
  6. After the final winding of the fishing line onto the spool, we attach the edge of the fishing line to the clip, which is located on the side of the spool.

Next is a video from a spinning fisherman, which describes and shows the process of winding fishing line on a spinning reel.

Observance of simple principles: the use of backing, the correct effort, profile and volume of winding will allow you to get the best use of gear and ensure that you work with it at a high level of efficiency.

Now only pecks from me!

Has your hand ever tired of playing 7 large fish one after another? The feelings are twofold, but definitely worth a try!

Visiting the editors Ivan Eliseev with the secret of luring large fish.

Posted by Valery Kudasov | Posted on: August 27, at 01:18

How to wrap fishing line on a reel? A very topical issue for beginner spinning. The rod has already been purchased. fishing line, reel. baits selected on the advice of more experienced friends or a sales assistant. But because of such seemingly trifles as refueling fishing line in an inertialess reel, you will not run for help from familiar fishermen.

Everything seems to be simple, even in the instructions for the reel there is a simple scheme, take it and rewind the line from the reel to the spool. But with this attitude, the very first fishing may end in an unpleasant surprise in the form of self-resetting loops and unraveling the “beard” instead of catching fish. To avoid this, we have prepared this material on the proper winding of fishing line.

Reel selection and winding types

The first steps in spinning fishing usually start with light short rods and reels of the appropriate class. Usually these are reels with a spool size of 2000-3000, accommodating 100 meters of fishing line with a diameter of 0.2-0.3mm. In addition to the size of the reels, they differ in the type of line winding. It can be direct cylindrical winding, direct conical and reverse conical winding. If you have a cheap Chinese reel, then be prepared for chaotic, erratic logging. And if for winding such a winding is uncritical, but use fishing line braiding on such a coil is not recommended. After all, even the preliminary correct dressing of the wicker with backing will not be able to protect against subsequent “beards” or unsuccessful castings due to overlap and tangling of the hard wicker cord.

Read more:  How to Open an Electric Trimmer Coil

If we talk about a quality logger, then the equipped fishing line in profile should form an even fishing line. Direct, parallel to the spool, with cylindrical winding, and inclined. with a cone. In some coils, for example Shimano. You can change the profile of laying the fishing line by substrate washers under the spool. In other coils, where the winding profile is created by the taper of the spool, it can be changed by reeling under main fishing line backing.

How to reel a fishing line on a reel

To get started, put the fishing line spool on a rod (pencil, screwdriver, needle) that is statically fixed (or ask someone to hold it), the spool should rotate freely. Then the fishing line is passed through all the rings of the rod and a knot is tied at its tip. Refueling starts with fixing it on the spool. Lift the stowage handle, wrap the fishing line around the spool, tie another Arbor knot (as shown) and tighten, then lower the handle.

If you are dressing a wicker fishing line, then glue an adhesive plaster under the place of fastening, and even better, put on a piece of rubber cut off from the fingertip. Thus, slippage of the fishing line on the spool can be avoided. Next, start winding the fishing line by rotating the spool handle evenly. You should know that when refueling the fishing line must be in a taut state. The tension is created by holding the fishing line. To avoid cuts, do not hold the fishing line with your bare hands, use a mitten or a piece of dense fabric.

It is not advisable that the winding of the line end flush with the sides of the spool. With such winding, self-resetting of loops and the formation of a “beard” are possible. The winding of the fishing line is considered optimal, where 1-2 mm from the side remain free. If you have a free distance of more than 5 mm, then this can adversely affect the casting distance. To avoid this use reeling under the main line. backing.

Backing

As backing, fishing line up to 0.3 mm in diameter is used. Winding fishing lines of large diameters can lead to subsequent uneven laying of the main fishing line. It is also undesirable to use cotton or kapron threads by backing; they dry for a long time if they get wet during fishing.

As for the amount of fishing line for backing, it can only be calculated empirically. For this we need an additional interchangeable spool. The process itself looks like this: first, the main fishing line is wound on an additional spool, then backing, with the same 1-2mm indent from the side. Further, the main spool is installed on the reel and the reverse winding process is performed. first backing, and then the main fishing line. If there is no additional spool, then you have to rewind all this fishing line twice to any other reel or reel.

Reel storage

A few words about caring for fishing line. In the case of long storage, poorly dried fishing line loses its elasticity and can break at the most crucial moment. To avoid this, before long-term storage, for example, in the off-season, carefully wind the main fishing line onto the floor, let it dry, and then rewind it onto a reel. This operation can be done after each fishing. only a stretch of reeling line can be limited to a little longer than it was at maximum casting.

In conclusion, watch a video on how to properly wind a line onto a reel:

Valery Kudasov, member of the editorial board of the Sobkor of the online publication AtmHunt. Hunter and Fisherman Herald

How useful was the information to you?

Sources: http://www.fermerbezhlopot.ru/rybovodstvo/kak-namotat-lesku-na-katushku, http://hariuz.ru/sposob-lovli/spinning/namatyvaem-lesku-na-katushku.html, http: //atmhunt.ru/2014/08/27/kak-pravilno-namotat-lesku-na-katushku/

No comments yet!

Share your opinion

  • enter
  • insert
  • fill
  • charge up
  • land plot
  • to cover
  • put on
  • to clothe
  • to accept
  • Other
  • turn in
  • take off
  • make up
  • to cut
  • lay down
  • install
  • Proper nutrition
  • Right answers
  • Right foundation