To ensure that the area near the house always looks neat and tidy, you need to cut it regularly. Fortunately, modern technology allows us to solve this problem without excessive physical effort. Electric trimmers are so easy to manage and care that even a teenager can mow the grass with their help. The main thing is to figure out first how to refill the fishing line in the trimmer.
How to charge a fishing line into a trimmer?
So, we are faced with the task of properly charging the fishing line into the trimmer. Let’s understand in more detail where to start its implementation and what pitfalls can await us in the process.
Step 1. choose a fishing line
Step 2. remove the coil from the trimmer
To perform this operation, the trimmer must be disconnected from the network and turned upside down with the working head. The further course of action depends on the trimmer model and the design of the coil itself:
- for small trimmers with a lower engine position, press the keys located on the sides of the coil and remove its upper part from the head;
- on trimmers with a bent rod, we clamp the coil housing with one hand, while simultaneously turning the lamb on the housing;
- for trimmers with a direct boom and gear, insert a screwdriver into the hole located under the coil, and then rotate the coil body counterclockwise.
Step 3. disassemble the coil
After the coil is removed from the head, it must be carefully disassembled. It is better to do this on an already mowed area, since there may be a spring inside the coil, which will be difficult to find in tall grass. After disassembling, we will have three parts on hand: a body (top cover), a protective casing and the coil itself.
Video: How to Insert a Fishing Line Into a Trimmer
Step 4. measure the required amount of fishing line
Novice mowers are usually interested in how many meters of fishing line to wind onto the trimmer reel? There are two ways to resolve this issue:
- Unwind a skein of fishing line on a flat, dry place and separate half from it.
- Measure from the skein 3-4 meters of fishing line.
In any case, after the end of the winding, the turns of the fishing line should be on the body of the coil, without sliding off it. No need to try to wind as much as possible, since the fishing line will be badly unwound and tear more often.
Step 5. wrap fishing line on a reel
How to install the fishing line on the trimmer depends on the design of the coil. Consider the option when in the coil body there is one outlet under the fishing line. In this case, we clamp the end of the fishing line in the crevice of the reel, and then we wind the fishing line, trying to lay the turns as tightly as possible. The direction of laying of the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After winding up on the reel, it is necessary to put on a protective cover and bring the end of the fishing line into it
If the reel is designed to work with two tails, then the fishing line must be folded in half and laid in a groove in the central part of the reel. Further winding will be carried out in one or two grooves, depending on the design of the coil. The direction of winding should also be opposite to the direction of rotation of the coil. At the end of the ponytails, the fishing line will also need to be pulled out into the holes on the top of the reel.