How to make an additional muffler on a chainsaw. Noise when working

Homemade muffler for a chainsaw with your own hands

Good day, dear readers of the Blog Subscribers Andrei Noac. Here, recently, my neighbor in the country drilled trees on its site and harvested firewood. Naturally used a chainsaw.

Although he did not acquire a professional saw, but a household, but she was very noisy. While he worked all the neighbors, including me, are tired of this noise.

Here the thought came to my mind, tell him how to make a muffler for a chainsaw with his own hands.

Why rustles a chainsaw?

All chainsaws have only one significant non.prosperity. this is a noise when working, which in some places (cottages, personal plots) interferes and irritates many people. If the noise from a working saw prevents the concentration, then such an option as headphones that suppress the noise is possible. But everyone around them will not walk in the headphones, while someone is noisy.

The clogged or not corrected muffler is the reason that the engine is constantly stalling or does not start at all.

It happens that the chainsaw works normally at small speeds, but it is worth adding the gas, as it sneezes and stalls right away.

The reason, as a rule, is that the exhausts cannot pass through the muffler clogged with Garya and are forced to move in the opposite direction.

To do this, it is enough to remove it and clean it, if it is of course versed, if not, you will have to dry it with hot air using a hairdryer.

The most important reason for the muffler pollution is an excessive amount of oil, which is diluted with gasoline and as a result of which settles on its walls.

• If you decide to independently clean the non.collapsible muffler, then keep in mind that you can not do this on dry hairdryer, since hazardous substances are extremely harmful to health.
• Although most of the manufacturers of chainsaws and try to muffle the engine noise if possible, but this does not lead to anything good and first of all affects the power of the apparatus.

Professional chainsaws, for example, Husqvarna cannot work quietly at all, since power and speed are very high, which leads to a strong noise.

Trying to independently muffle the roar of the motor, while maintaining high performance is extremely difficult.

But there are people who use an ordinary bucket of water and a plastic tube, lowered into the water at one end, and the other end is screwed to the exhaust pipe. There are effectiveness from such actions, the sound of the motor becomes quieter.

Why do you need a muffler

This is a special device, thanks to which the noise from the operating engine becomes an order of magnitude lower, but does not muffle completely and this does not suit many.

Of course, saws are now sold, in which the muffler is able to suppress the noise several times, but this immediately affects the work of the saw.

Therefore, if you want to do the operation of the motor even quieter than the plant, then you should try to put an additional muffler, making it yourself.

If you show ingenuity and the same saw of the Urals can be forced to work much quieter and it will not affect its performance in its performance.

We do it yourself

In order to save money and time spent in search of the right workshops, I advise you to make a muffler at home. This is not as difficult as it seems at first glance.

All you need is a regular sheet of 1 mm stainless steel, an iron tube of smaller diameter than that of a muffler, stainless wool, basalt fiber and a little patience.

• We take a sheet of steel and wrap around the rollers, in the end we get a round tube, but an oval pipe will definitely be needed. To do this, heated by welding and then crush the tube, an oval shape should be obtained;
• If you have a finished pipe of a suitable diameter, then this is good, if not, then you need to make it using a welding machine. To do this, take a metal sheet, mark the necessary dimensions and cut with welding. Then we make a pipe, the seam should be thin and without bugs;
• When the finished pipe turned out, you need to make as many holes as possible in it, and you can make holes both randomly and in strict order, this does not play a role;
• Next, take the cooked stainless wool prepared in advance and begin to wrap the pipe from the outside. This is necessary so that there is no blowing of the muffler lining;
• Then we wrap it over stainless wool with basalt fiber (this is the most suitable material) and so that it does not slip, we fasten with wire, which should be thin and at the same time strong;
• We insert the wrapped pipe into the future apparatus and grind it all with sandpaper, pay special attention to the seams and joints so that they do not stick out much;
• When you do all this, the resulting unit must be attached to the chainsaw as strong as possible so that it does not fly at the right time.

Such a home.made apparatus, if everything is done correctly, will serve for a long time and significantly reduce the noise of the motor, it works well on the firmicity of friendship. Another plus of a home.made muffler is that it will cost you a meager amount. You will only spend time, but it’s worth it.

This version of the muffler can also be applied: to put partitions in the pipe, which is in the muffler and thereby reduce the noise level of the motor. This is due to the fact that noise itself is a strong fluctuation in air, which with great speed comes out of the muffler out.

In order to reduce the noise of the work, just drill holes in the pipe and insert partitions into them at equal distances. It will turn out a lot of divisions and the gas will be in stages to go out, while the pressure and noise will decrease. Respectively, the speed of gases will fall, which will lead to a decrease in noise.

If you want to make the gases leave the cylinders faster, thereby reducing the engine efforts so that the saw productivity increases, remember that there will be several times more noise.

In order to achieve this, you need a straight.flowing muffler, which can be made from the pipe according to the sketches of the old muffler, unscrewing and subsequently using all the bolts and nuts.

I advise you to choose a pipe from steel, then the muffler will last longer. If there is no suitable steel pipe, then you need to make it using a steel sheet. Using a welding machine, you can make the required tube in diameter and size.

Everything is provided for the plant, everything should work as a whole and if you try to change anything on your own, including improving the muffler without any drawings, then this is quite difficult and not everyone can get it.

Assembly process

There are several areas of modernization of the chainsaw with your own hands. With the right approach, a home.made exhaust system will act effectively without reducing the power of the unit.

The easiest way to get rid of the roar is to use a flexible plastic duct and water container. The hose through the heat.insulating gaskets is screwed to the exhaust pipe, its other end is lowered into the water and is rigidly fixed on the tank.

Gradually cooling and losing speed, the exhaust freely leaves the engine. Air contact is neutralized due to water. To make a similar muffler on a chainsaw, it will take at least 3 m of flexible pipes and a bucket with a capacity of 10-12 liters. This design is suitable for working on an even open area without moving around the site. Used for sawing firewood or timber in the courtyard of the house.

The drop in the power of the device and loud sounds at low speeds can be caused by clogging muffler. Passing through a narrowed hole, exhaust gases emit a strong roar. In some cases, the tool makes loud sounds resembling shots.

You can solve this problem in the following ways:

• Disassemble the unit in accordance with the attached instructions. Eliminate the exhaust system, remove the soil from it, wash off solid deposits with a solvent or gasoline. Degrees and put in place. Elements do not need lubrication, t. to. It burns in contact with exhaust gases.
• Clean the exhaust system mechanically. Previously, it should be dried with a construction hairdryer, t. to. sticky substance is poorly cleaned. Nagar removal is carried out with a ruff with a hard plastic pile. It is not recommended to use steel devices, t. to. They scratch the metal, which leads to accelerated wear of the product.

It is possible to prevent rapid clogging of the muffler by preparing the fuel mixture from high.quality gasoline and oil, which must be mixed in the proportion indicated by the manufacturer.

Homemade exhaust system is made of metal. This design is a continuation of the standard muffler.

The work is carried out in the following sequence:

• A pattern is made for bending pipes from tin. You need to make two blanks. One should be equal to the exhaust hole. The second is pulled out with a cross section 2-2.5 cm larger. For such a goal, it is better to use fine.fiber wood of solid rocks.
• A sheet of stainless steel is cut into the blanks of the desired length and width. They are wrapped around rollers. This is done with the help of muscular strength and hammer. To simplify the process, one edge of the workpiece is rigidly attached to the rollers with nails or screws.
• The edges of the bent pipes are aligned and welded to each other. On a wide workpiece, the seam is aligned and polished. This is necessary for the safety of the master and give the product a presentable type. Without this, tuning of the chainsaw will be incomplete.
• Many holes with a diameter of 3 mm are drilled in a thin pipe. You can make them in any order with an interval of at least 5 mm.
• Metal wool, basalt cord and aluminum wire are wound on top of the drilled blank. The fixation should be dense so that the filler does not blew under the pressure.
• An external pipe is pulled on top of the resulting product. They are carried out with bolts or screws. The front facade is brewed with a steel puck.
• The finished muffler joins the exhaust pipe of the chainsaw. It is better to make fixation with rivets.

It does not take much time to make such a device, it will cost inexpensively. But the product can serve for several years, it only needs to be periodically cleaned from the accumulated carrier.

How to make a quiet muffler on a chainsaw

Is it possible to make this engine quiet?The client comes to the store to return the product chainsaw.

What are the claims? Yes, in the annotation, he writes that he cuts 4 cubes of firewood in an hour, and I will not come out more than 3, we’ll check (starts) uh, why did she rush to you? There are two engines from chainsaws, both yell to the impossibility, with one of them began to examine, made Glushak.

But the shock sound has become started now, the sound of the exhaust has become quieter, but it seems like the motor itself is deceivingly noisy. Quiet muffler for a chainsaw. How to make a muffler quieter.How to make an exhaust pipe for a chainsaw. Lions.

Molezer for muffler video. muffler. spare parts for chainsaws and trimmers of a chainsaw is a universal tool, the implementation of which is very wide.

Due to the special significance of technology of this kind, modern manufacturers offer customers a wide selection of various models not only how to make a muffler for a chainsaw in home criteria. Good time of day, dear readers of the blog subscribers Andrei Noac.

To make such a device that will really make the chainsaw work much quieter and you will not have to quarrel with how to make a quarrel on a chainsaw? It works soundly. There is Alpina and Chinese, Patriot or something.There are simply two holes with complex geometry on Chinese.

What can be attached to work quieter? how to make a stihl chainsaw quite silent | Topic creator: Igor. It is necessary to cut down a few trees in the Tikharya so that no one is seeing and could not hear anyone knows how to make a plug on a plug without noise and investigation.

About what can be done from a chainsaw with your own hands, then it will be about. Features of the creation of a motorcycle from a gasoline saw. How to make a muffler. Andreynoak.ru. In order to make a motorbike from a chainsaw with your own hands, first you need to adjust the speed of rotation of the engine how to make the exhaust quieter on a chainsaw. Vlogloglist muffler for a chainsaw, blog. There are already muffles on the chainsaws.How to make a muffler for a chainsaw. Make a quieter chainsaw. MasterCity forum.

manual homemade saw from a chain. From the chainsaw: Survival. No related questions were found. Is it possible to make a chainsaw quieter? 0. User Alexei Stukalsky asked a question in the category of other auto-taxes and received 9 answers to it. There is a movement from a saw friendship. 4 l/s. How to make a muffler on a chainsaw?

But the roar from him- the ears are already laid. From which he would make a gastard? Car resonator, or muffler is suitable? Or both of them are necessary? I was partially disassembled by me (for cleaning and evaluating the state of parts).

I also replaced the tip of the spark plug (all in cracks) and the ignition switch was installed (was absent at the time of purchase of the saw). Page “Daching House” What can be done from a chainsaw with your own hands?Household saws are sold at low cost, much easier in weight and are convenient to use.

“A quiet straight-flowing nozzle-ugly grinder on a chainsaw how to remove the silencer on. In the hands of craftsmen ordinary chainsaws, originally designed for sawing wood, becomes truly multifunctional device. How to make a quiet muffler sealing. At the same time, the breadth of its application simply amazes with its diversity.

Good afternoon, dear readers, subscribers for the blog Andrew Noac. Here my neighbor in the country recently drank trees on his site and cooked firewood. Naturally used chainsaws. Although he did not receive a professional saw, but his home saw, but it was very noisy. While he was working, all the neighbors, including me, are tired of this noise. Here I had an idea to tell him how to make a muffle mercenary with my hands.

Muffler to the chainsaw of Stihl

The video shows the work of a calm with a home.made muffler, which really lowering the engine noise more than 50% of the customer.

How to make a homemade muffler. Ishi was judged by the engine’s noise and went when he made a copy of the Yak-50 2 years ago, while the goal was not aimed to get a quiet or made a screw for 20 revolutions and put it in the muffler pipe. The sound did not become quieter, but only changed. Roared on one note, on the letter: p-shchech-shche-shch-shchech!Electric saws probably do not roll, t.to. Already bought a bunch of chainsaws, and it is also an electricity to buy a Bosch AKE 30 Li battery chain saw. Quiet muffler for a chainsaw. How to make a chainsaw »Similar videos how to make. Somehow it happened, the saw was sold for the action not so expensive. CTS CS CTS CTS CCC from OREGON. Silent work without soot and wires. How to Make A Silencer for a 2-Stroke Engine with Their Own Hands. Stroke, do.it.yourself repair. How to make a chainsaw work silently.With all your own hands, repairing the chainsaws with all your desire, with all the desire, cannot be attributed to complex devices, and nevertheless, the repair of the chainsaw can take a lot of time a nozzle on the gas.rosopila “Corner grinding” performs surgery such as cutting metal and stone surface grinding and others.While a special engine is very expensive, a boat motor made of a chainsaw will be an excellent budget solution. How to start a chainsaw. a couple of the most popular ways. Dismantling of the chainsaw Partner 352. Chainsaw aircraft test.The muffler of the chainsaw. How to make a strip saw part. 1. Here the thought came to my mind, tell him how to make a muffler for a chainsaw with his own hands.If you show ingenuity and the same saw of the Urals can be forced to work much quieter and it will not affect its performance in its performance. There is an idea. to adapt a muffler from a moped to a chainsaw. What do you think? Someone did?Somehow it was necessary to fill up a couple of oaks in a quiet. Two.armed for a long time, so we decided to modernize Stile. Homemade muffler for chainsaw. Video; Make the Market to make a quieter quieter as a hose of air compressor with. Loaded. I use a chainsaw as a boat motor and therefore made a blasphemy.In this video, I will show how to prompting a chainsaw, make it safe for hellish pranks how to make a chainsaw as quiet as possible, and at the same time the loss of power so that there is up to 15-20? So that it was not at night to blame the trees. Will be both environmentally and quiet and healthy for health!In my opinion, if the soul does not tolerate, there are two exits: to pause and eat twix or go to electro. Others how to make a silent muffler for a chainsaw, a home.made home.made car with your own hands, a flame arrester instead of a catalyst on Ford, a metal grid in a direct flow, remove the VAZ 2114 catalyst, a resonator for the Ford Explorer 1991 How to make a chainsaw from to make such a saw: you will need: lemonade shikhan. rope, lighter, awl, outer. knife. put Likekak to make the exhaust quieter in idle so as not to interfere with the neighbors) Astalavista ind 3 year. make a quieter chainsaw- photo- Mastergrad forum.A quiet exhaust with your own hands VAZ 2109. Raum Prof. How to make a quiet muffler on a chainsaw video. MosstroyService. Silent? How to make a chainsaw »Similar videos how to make a chainsaw. But how to make it with your own hands? How to make a quirk exhaust on a chainsaw? What can be attached to work quieter? Therefore, manufacturers around the world create more and more models with high power and lightweight. Let’s talk further in this article on how to make a muffler for a chainsaw.And what to do if you need a powerful and at the same time quiet model to work in a personal plot or during the construction of a house from a log house?

How to make a silent chainsaw with your own hands: describe by points

Good day, dear readers of the Blog Subscribers Andrei Noac. Here, recently, my neighbor in the country drilled trees on its site and harvested firewood. Naturally used a chainsaw.

Although he did not acquire a professional saw, but a household, but she was very noisy. While he worked all the neighbors, including me, are tired of this noise.

Here the thought came to my mind, tell him how to make a muffler for a chainsaw with his own hands.

Why rustles a chainsaw?

All chainsaws have only one significant non.prosperity. this is a noise when working, which in some places (cottages, personal plots) interferes and irritates many people. If the noise from a working saw prevents the concentration, then such an option as headphones that suppress the noise is possible. But everyone around them will not walk in the headphones, while someone is noisy.

The clogged or not corrected muffler is the reason that the engine is constantly stalling or does not start at all.

It happens that the chainsaw works normally at small speeds, but it is worth adding the gas, as it sneezes and stalls right away.

The reason, as a rule, is that the exhausts cannot pass through the muffler clogged with Garya and are forced to move in the opposite direction.

To do this, it is enough to remove it and clean it, if it is of course versed, if not, you will have to dry it with hot air using a hairdryer.

The most important reason for the muffler pollution is an excessive amount of oil, which is diluted with gasoline and as a result of which settles on its walls.

If you decide to independently clean the non.collapsible muffler, then keep in mind that you can not do this on dry hairdryer, since hazardous substances are extremely harmful to health.

Although most of the manufacturers of chainsaws and try to muffle the engine noise if possible, but this does not lead to anything good and first of all affects the power of the apparatus.

Professional chainsaws, for example, Husqvarna cannot work quietly at all, since power and speed are very high, which leads to a strong noise.

Trying to independently muffle the roar of the motor, while maintaining high performance is extremely difficult.

But there are people who use an ordinary bucket of water and a plastic tube, lowered into the water at one end, and the other end is screwed to the exhaust pipe. There are effectiveness from such actions, the sound of the motor becomes quieter.

Muffler for a chainsaw: how to make a tool silent?

Chainsaws are one of the common tools used to cut trees and large shrubs.

And if there are ways to save your eyes and face from flying small sawdries, then what to do with the ears? Working chainsaws are very loud and can damage your ears even with short.term use. Especially if it is a chainsaw on gas.

So that you can work more safely with this tool, we offer you to independently make a muffler for a chainsaw using a guide that we cite below.

Why rustles a chainsaw?

There are several different reasons why the chainsaws are so loud. These 3 factors create the most noise:

You probably already guessed that the engine is the main culprit of the noise. That is why gas chainsaws are so loud compared to others, since their engines on average produce the most noise.

The cutting process will also add noise produced by a chainsaw. Chain with an old chain that is no longer acute and has no proper lubricant, can potentially lead to a higher noise level.

Vibrations, although to a much lesser extent, will also increase the overall level of noise. One of the reasons why electric and battery chainsaws work much quieter is that they will generate less vibration.

Why do you need a muffler

The prolonged exposure to extremely loud noise is undoubtedly dangerous and can lead to hearing loss. Chainsaws can be very loud. from 80 to 120 decibels. For comparison, a normal conversation is on average about 60 decibels.

The longer and more often you expose loud noise, and the closer you are to the source, the more harm your hearing will be received.

Let’s look at some data and time frames:

• Sounds up to 70 dB are safe, and you can listen to them over long periods.
• Sounds on 85 dB are dangerous if you listen to them for more than 8 hours.
• Sounds at 111 dB are extremely dangerous and can lead to hearing loss in less than a minute.
• Sounds of about 200 dB lead to death.

Interestingly, loud noise from chainsaws is dangerous not only for your ears. Loud noises create even greater health risk. They can bring to:

After a short work with a chainsaw, you may need at least an 18-hour break to restore hearing.

To reduce the noise from the chainsaw, you can try to do it yourself and install a muffler on it. For this you will need:

• Make 2 tubes from stainless steel. The first in diameter must be made so that it enters the factory silencer. And the second one is a couple of centimeters more than the first.
• Drill holes in the first tube in any order, but with a distance of at least 5 mm from each other.
• Tightly wrap the first pipe with metal, so that the exhaust gases could not destroy the constructed structure.
• Put on a second tube on the oen.over the second pipe. So that they are well fixed, insert screws.
• At the end, brew the end of the steel puck for tightness.

Such a homemade muffler will reduce the noise from the chainsaw, on average, by 25-35%. Of course, you can apply other ways to reduce the volume of the chainsaw, both homemade and purchased, but in practice they are not as effective as a home.made muffler.

We do it yourself

In order to save money and time spent in search of the right workshops, I advise you to make a muffler at home. This is not as difficult as it seems at first glance.

All you need is a regular sheet of 1 mm stainless steel, an iron tube of smaller diameter than that of a muffler, stainless wool, basalt fiber and a little patience.

• We take a sheet of steel and wrap around the rollers, in the end we get a round tube, but an oval pipe will definitely be needed. To do this, heated by welding and then crush the tube, an oval shape should be obtained;
• If you have a finished pipe of a suitable diameter, then this is good, if not, then you need to make it using a welding machine. To do this, take a metal sheet, mark the necessary dimensions and cut with welding. Then we make a pipe, the seam should be thin and without bugs;
• When the finished pipe turned out, you need to make as many holes as possible in it, and you can make holes both randomly and in strict order, this does not play a role;
• Next, take the cooked stainless wool prepared in advance and begin to wrap the pipe from the outside. This is necessary so that there is no blowing of the muffler lining;
• Then we wrap it over stainless wool with basalt fiber (this is the most suitable material) and so that it does not slip, we fasten with wire, which should be thin and at the same time strong;
• We insert the wrapped pipe into the future apparatus and grind it all with sandpaper, pay special attention to the seams and joints so that they do not stick out much;
• When you do all this, the resulting unit must be attached to the chainsaw as strong as possible so that it does not fly at the right time.

Such a home.made apparatus, if everything is done correctly, will serve for a long time and significantly reduce the noise of the motor, it works well on the firmicity of friendship. Another plus of a home.made muffler is that it will cost you a meager amount. You will only spend time, but it’s worth it.

This version of the muffler can also be applied: to put partitions in the pipe, which is in the muffler and thereby reduce the noise level of the motor. This is due to the fact that noise itself is a strong fluctuation in air, which with great speed comes out of the muffler out.

In order to reduce the noise of the work, just drill holes in the pipe and insert partitions into them at equal distances. It will turn out a lot of divisions and the gas will be in stages to go out, while the pressure and noise will decrease. Respectively, the speed of gases will fall, which will lead to a decrease in noise.

If you want to make the gases leave the cylinders faster, thereby reducing the engine efforts so that the saw productivity increases, remember that there will be several times more noise.

In order to achieve this, you need a straight.flowing muffler, which can be made from the pipe according to the sketches of the old muffler, unscrewing and subsequently using all the bolts and nuts.

I advise you to choose a pipe from steel, then the muffler will last longer. If there is no suitable steel pipe, then you need to make it using a steel sheet. Using a welding machine, you can make the required tube in diameter and size.

Everything is provided for the plant, everything should work as a whole and if you try to change anything on your own, including improving the muffler without any drawings, then this is quite difficult and not everyone can get it.

At best, power will be lost, and at worst. the chainsaw will stop starting.

For such chainsaws such as Stihl 180, it is better to buy a native muffler, which you can change yourself and without any problems.

Therefore, if you have certain knowledge and the ingenuity works well, then you should try to independently make an additional muffler, thereby saving money and it may be possible to make a device that will really do the work of the chainsaws much quieter and you will not have to constantly quarrel with your neighbors or with others you are people.

Alternative electronic ignition diagram for chainsaws.

The easiest to assemble and seems to be an intricate and complex one will be a circuit, which represents an electronic ignition unit of a chainsaw.

This scheme appeared after frequent appeals to us for help in the repair of chainsaws, which have disappeared spark discharge on the spark plug, issued by the standard electronic unit.

The main reason for the withdrawal of the electronic ignition unit from the working condition is a break in a high.voltage wire or a large installed gap on the spark plug. Additionally negative factors are moisture, wet dust covering the unit and, in fact, the use of the spark plugs inappropriate to the working and electrical parameters.

The standard blocks were converted by us to install the most affordable domestic parts on them, which reduces the cost of repairing the unit.

Assembly process

There are several areas of modernization of the chainsaw with your own hands. With the right approach, a home.made exhaust system will act effectively without reducing the power of the unit.

The easiest way to get rid of the roar is to use a flexible plastic duct and water container. The hose through the heat.insulating gaskets is screwed to the exhaust pipe, its other end is lowered into the water and is rigidly fixed on the tank.

Gradually cooling and losing speed, the exhaust freely leaves the engine. Air contact is neutralized due to water. To make a similar muffler on a chainsaw, it will take at least 3 m of flexible pipes and a bucket with a capacity of 10-12 liters. This design is suitable for working on an even open area without moving around the site. Used for sawing firewood or timber in the courtyard of the house.

The drop in the power of the device and loud sounds at low speeds can be caused by clogging muffler. Passing through a narrowed hole, exhaust gases emit a strong roar. In some cases, the tool makes loud sounds resembling shots.

You can solve this problem in the following ways:

• Disassemble the unit in accordance with the attached instructions. Eliminate the exhaust system, remove the soil from it, wash off solid deposits with a solvent or gasoline. Degrees and put in place. Elements do not need lubrication, t. to. It burns in contact with exhaust gases.
• Clean the exhaust system mechanically. Previously, it should be dried with a construction hairdryer, t. to. sticky substance is poorly cleaned. Nagar removal is carried out with a ruff with a hard plastic pile. It is not recommended to use steel devices, t. to. They scratch the metal, which leads to accelerated wear of the product.

It is possible to prevent rapid clogging of the muffler by preparing the fuel mixture from high.quality gasoline and oil, which must be mixed in the proportion indicated by the manufacturer.

The work is carried out in the following sequence:

• A pattern is made for bending pipes from tin. You need to make two blanks. One should be equal to the exhaust hole. The second is pulled out with a cross section 2-2.5 cm larger. For such a goal, it is better to use fine.fiber wood of solid rocks.
• A sheet of stainless steel is cut into the blanks of the desired length and width. They are wrapped around rollers. This is done with the help of muscular strength and hammer. To simplify the process, one edge of the workpiece is rigidly attached to the rollers with nails or screws.
• The edges of the bent pipes are aligned and welded to each other. On a wide workpiece, the seam is aligned and polished. This is necessary for the safety of the master and give the product a presentable type. Without this, tuning of the chainsaw will be incomplete.
• Many holes with a diameter of 3 mm are drilled in a thin pipe. You can make them in any order with an interval of at least 5 mm.
• Metal wool, basalt cord and aluminum wire are wound on top of the drilled blank. The fixation should be dense so that the filler does not blew under the pressure.
• An external pipe is pulled on top of the resulting product. They are carried out with bolts or screws. The front facade is brewed with a steel puck.
• The finished muffler joins the exhaust pipe of the chainsaw. It is better to make fixation with rivets.

It does not take much time to make such a device, it will cost inexpensively. But the product can serve for several years, it only needs to be periodically cleaned from the accumulated carrier.

Good day, dear readers of the Blog Subscribers Andrei Noac. Here, recently, my neighbor in the country drilled trees on its site and harvested firewood. Naturally used a chainsaw. Although he did not acquire a professional saw, but a household, but she was very noisy. While he worked all the neighbors, including me, are tired of this noise. Here the thought came to my mind, tell him how to make a muffler for a chainsaw with his own hands.

Necessary materials and tools

In standard cutting products, the exhaust system is made as short as possible. This decision is made to achieve the power necessary to quickly rotate the circuit. In order not to worsen the operational characteristics of the equipment and make it quieter, a thoughtful and integrated approach is necessary.

Making a muffler for a chainsaw with your own hands involves the presence of such tools:

• roulette;
• welding machine;
• scissors for metal;
• corner grinder;
• a hammer;
• Kern;
• marker;
• rivet;
• file;
• electric drill;
• construction hairdryer;
• Sprinkles.

Depending on the features of the introduced improvements, materials may be required:

• sheet stainless steel;
• rivets;
• bolts;
• screws;
• basalt refractory cord;
• wire;
• wood array for rollers.

To protect hands, skin, organs of vision and breathing, the following means should be used during operation:

The design of the tool provides partial absorption of the noise with the body. If there are large cracks in it, they can be covered with mastic based on silicone. The material will reduce vibration, rattle of plastic and metal.

Why rustles a chainsaw?

All chainsaws have only one significant non.prosperity. this is a noise when working, which in some places (cottages, personal plots) interferes and irritates many people. If the noise from a working saw prevents the concentration, then such an option as headphones that suppress the noise is possible. But everyone around them will not walk in the headphones, while someone is noisy.

The clogged or not corrected muffler is the reason that the engine is constantly stalling or does not start at all.

It happens that the chainsaw works normally at small speeds, but it is worth adding the gas, as it sneezes and stalls right away. The reason, as a rule, is that the exhausts cannot pass through the muffler clogged with Garya and are forced to move in the opposite direction. To do this, it is enough to remove it and clean it, if it is of course versed, if not, you will have to dry it with hot air using a hairdryer.

The most important reason for the muffler pollution is an excessive amount of oil, which is diluted with gasoline and as a result of which settles on its walls.

If you decide to independently clean the non.collapsible muffler, then keep in mind that you can not do this on dry hairdryer, since hazardous substances are extremely harmful to health.

Although most of the manufacturers of chainsaws and try to muffle the engine noise if possible, but this does not lead to anything good and first of all affects the power of the apparatus.

Professional chainsaws, for example, Husqvarna cannot work quietly at all, since power and speed are very high, which leads to a strong noise. Trying to independently muffle the roar of the motor, while maintaining high performance is extremely difficult. But there are people who use an ordinary bucket of water and a plastic tube, lowered into the water at one end, and the other end is screwed to the exhaust pipe. There are effectiveness from such actions, the sound of the motor becomes quieter.

Areas of application

As mentioned above, such a technique has a wide area of ​​use. In addition to the main purpose. the implementation of a log house and the harvesting of a wooden beam, such a technique has found its application in other areas of human life. And today you can buy not only professional, but also household models.

They are very necessary in personal plots with plantations of fruit trees. They are also relevant when performing construction and repair work in the event that a wooden building is built or restored. In addition, they are used to harvest firewood in villages and the like.

Reduce noise with our own hands

To do this, we perform the following actions:

• Take a sheet of stainless steel, 1 mm thick, and twist it on rollers. As a result, you should get a round pipe, but it must further be brought to the shape of the oval. If there is an already finished pipe with parameters suitable for the parameters of your chainsaw, you can use it;
• Cook the joint and press a little in order to get an oval shape;
• Cook a pipe of smaller diameter than a muffler, and perform many holes in it so that the pipe turns out to be oeural;
• We wrap the oenic pipes with stainless wool, so as not to let the muffler stuffing be blown away;
• It remains as firmly and reliably smelled on top of the stainless wool basalt fiber. Use a strong wire of thin diameter for this;
• We fill the inside of the future muffler with oxide pipes, wrapped in stainless wool;
• Wipe thoroughly, and then polish the seams using fine sandpaper;
• We connect the resulting unit to the chainsaw as reliable as possible.

See how the finished unit collected according to this algorithm of action looks like the next photo.

The resulting unit will cost its creator a penny amount, but at the same time will demonstrate high efficiency to reduce the noise of a working chainsaw.

Noise insulation of the motor compartment

The owner of Lada Vesta decided to make a complete sound insulation of the engine compartment:

The noise from the motor decreased so much that all its derivatives are not heard at all! There was the only noise, the family line of the vase. howling from the rollers in the range of 1500. 2200. Tales about the howl of the checkpoint at these revolutions I ask you not to tell me! This howl most likely comes from the Terms Tinger, if it is pulled, the howl turns into a trolleybus