How to make an electric vibrating plate with your own hands

Final works

After assembling the slab, all metal parts must be primed and painted to protect against corrosion. Attach the lead-in cable securely to the control handle to prevent it from being run over. The engine switch must be located on the structure itself to provide an emergency stop during operation.

After that, a do-it-yourself vibrating plate must be tested. Freshly dug earth is best suited for this. Testing on bulk material will prevent full load testing.

As you can see, it is quite possible to make a vibration machine on your own. But for this you need to have initial knowledge and experience of locksmith and welding works.

Types of plates used

Homemade designs require a power plant that provides the main work. Three types of motors are often used:

Diesel engines are appropriate when a lot of effort is constantly required. In everyday life, they are unjustified. Although it is not uncommon to find a vibrating plate from a walk-behind tractor with an installed two-stroke motor.

Apparatus with a gasoline engine, like previous designs, are autonomous, but extremely noisy in operation. An economical engine with a power of several watts is selected for them.

The recommended engine power is 1.5-2 kW at 4000-5000 rpm. Less power will not give the required shaft rotation speed, respectively, the vibration force will be insufficient

The optimal solution for many is an electric vibrating plate assembled by hand. It is enough to bring electricity to the place of work on the site and you can start compacting the soil. The positive factor is the absence of exhaust gases during the process.

According to the classification, it is customary to divide products into several groups:

  • lungs. weight less than 70 kg;
  • universal. up to 90 kg;
  • medium weight. 90-140 kg;
  • heavy group. over 140 kg.

The first group is appropriate for processing the local area, where it is supposed to press a layer of no more than 15 cm.Universal actual for processing 25 cm.Heavy devices are designed for 50-60 cm.

The larger the compacted layer, the heavier the machine must be

It is important to correctly select the electric motor for the vibrating plate. After all, a too weak model on a massive slab will sink in soil layers. The optimal ratio is considered to be when 5 hp are used per 100 kg of mass. or 3.7 kW.

Nutritional classification

Electrical. The most economical is considered to be electric. This is what is recommended to be collected with your own hands for your own household.

over, in terms of technical characteristics, vibratory plates with an electric motor are in no way inferior to their competitors. The only downside is the condition of the availability of an accessible electrical network.

Gasoline. Will cost more than electric, but cheaper than diesel.

However, it will be more profitable to buy diesel fuel, although the engine itself will be the most expensive of the three described.

VIBRATING TABLE. I make a with my own hands

Its disadvantage will also be high noise, which reduces comfort at work.

The installed motor must have sufficient power to handle a heavy plate. Otherwise, the latter will load in bulk material.

Appointment of vibrating plates

A vibrating plate is a mechanism designed to compact loose soils and bulk building materials. In addition, such a mechanism is widely used for vibration processing of semi-dry concrete mixtures and asphalt when constructing floors and sidewalk surfaces. The use of such a tool is very effective in the case of working in a small area of ​​the personal plot and in tight spaces.

Homemade electric vibrating plate.

The arrangement of sidewalks, garden paths, driveways and parking near a private house with the help of a vibrating plate is much faster, while ensuring a high quality of work. Compaction of the bottom of trenches during the laying of engineering communications excludes their possible damage in the event of subsidence of loose soil. These and other advantages encourage many DIYers to make such equipment on their own and use it when performing construction work.

Materials (edit)

  • Steel sheet 50x80cm in size and 8 mm thick;
  • A platform vibrator and an electric motor for it, for example, IV-98E. Some craftsmen make vibrating plates with a washing machine motor
  • Two pieces of channel up to 45cm long;
  • M10 and M12 bolts with nuts and washers;
  • Metal pipes 1.5 m long and 20-25 mm in diameter;
  • Shock absorbers.

Tamping plate manufacturing

The plate for vibration ramming can be made at the factory or made by hand from a metal sheet with a thickness of at least 8 mm. A self-made vibrating plate should provide such a weight of the device that will give a snug fit to the surface to be treated.

make, electric, vibrating, plate

Its dimensions should not exceed 800 x 500 mm, excluding the folded edge, which will ensure convenient operation and the ability to use the device without additional helpers.

A flat steel plate will constantly cling to uneven surfaces when moving over the ground or concrete mix. To avoid this, the front and rear edges of the slab are folded slightly upward, resulting in a sled-like structure. To do this, stepping back a little from the edge, you need to make an incision in the metal to a depth of 5-6 mm using an angle grinder and bend the strip. Repeat this operation on the other edge of the sheet. the line of contact after bending must be welded with electric welding.

Tamping plate manufacturing.

To mount the motor and vibration mechanism to the platform, the support frame must be secured. It can be made from two fixed pieces of metal channel. They must be installed parallel to each other transversely to the axis of the ramming platform. Drill the mounting holes for the motor and vibrator in them and weld with electric welding.

How to make a homemade vibrating plate with a washing machine motor

A simple option for making a vibrating plate with your own hands suggests using an engine from a washing machine. The method is convenient in that it is easy to get such a motor by simply removing it from the old equipment. In addition, the device can be connected to a 220 V household outlet, which will significantly simplify its use.

  • the metal sheet is cut with an angle grinder at the edges and bent up, and then the seams are welded with a welding machine;
  • with channels located at a distance of about 10 cm from each other, a vibrator with a motor installed on it is attached to the plate, while you need to monitor the strength of the fasteners and their even location;
  • the motor from the washing machine is fixed with bolts, usually M10 or M12 are used;
  • after installing the engine, they begin to make a handle, it can be made from any piece of steel pipe of a suitable diameter and fixed to the base with silent blocks or elastic cushions.

A vibrating plate with an engine from a washing machine with your own hands is already ready at this stage. However, it is recommended to modify it and equip it with wheels for more convenient movement. To do this, a piece of pipe is welded to the base of the structure. Along its edges, with the help of a welding machine, rings are mounted, in diameter corresponding to the selected wheels. The latter are fixed inside with the possibility of subsequent dismantling.

The vibrating plate with the motor from the old washing machine is economical and consumes little energy

The motor power of about 1.5 kW ensures quick and easy leveling of concrete or sand layers up to 200 mm thick. Do-it-yourself electric vibrating plate with a motor from a washing machine is suitable for most repair and summer cottage work.

The device and principle of operation of vibrating plates

When carrying out construction and repair work, it is often necessary to tamp and level bulk materials. sand, soil, gravel. To solve the problem at hand, a vibrating plate is used. Regardless of the model, it consists of several elements:

  • frames;
  • steel or cast iron plate;
  • vibration installation;
  • the engine driving the entire structure.

The principle of operation of the technique is very simple. The motor, when switched on through a belt drive and a clutch, starts the vibrator, and the vibrator transfers energy to the plate located at the foot of the installation. Frequent vibrational movements pass into the ground, and loose particles move as tightly as possible to each other.

Description, drawings and dimensions of vibrating plates and gasoline and electric motors

You can assemble a vibrating plate with an electric or gasoline engine with your own hands. Installation is fairly straightforward and requires readily available consumables.

The dimensions of the unit are selected individually, depending on the purpose. Usually, installations with a base of no more than 1 x 1 m are made. Such a do-it-yourself concrete vibrating plate turns out to be quite wide, but not too bulky and interacts well with a medium-power engine. The thickness of the steel sheet should be about 8mm.

Compact dimensions of the vibrating plate simplify interaction with the device for the operator

Do-it-yourself drawings and photos of the vibrating plate show how the main elements of the unit should be located. The base is always in the lower part; the motor part is installed on top of it. Frame and handle make it easier for the operator to operate the device.

For convenient movement, the vibrating plate can be equipped with wheels, it will be easier to deploy

How to make a vibrating plate with a gasoline engine for soil compaction yourself

You can make a vibrating plate for laying paving slabs or gravel in the country not only with an electric, but also with a gasoline engine. The latter makes it possible to carry out work almost anywhere, since it does not require connection to an outlet.

To manufacture the unit, you will need standard components:

  • metal sheet with a thickness of 8 mm and dimensions of about 1 x 1 m;
  • two channels;
  • several M12 bolts;
  • a piece of metal pipe for the handle;
  • shock absorbers, they can be taken from a car engine;
  • wheels to simplify the movement of the structure;
  • gasoline engine, power should be about 1.5-2 kW, large indicators are usually not required.

Assemble the structure as follows:

  • cut out a base of suitable dimensions with an angle grinder. compact 60×40 cm or more overall;
  • bend the slab upward along the edges so that it does not cling to the ground during work and does not bind in it, and the seams from the cuts are welded;
  • in the upper part of the welding machine, two channels are installed in a single plane and holes are drilled in them to mount the engine;
  • put the gasoline engine in the prepared nests using shock-absorbing rubber pads;
  • attach the lugs to the base and mount the handle to them, also not forgetting to ensure vibration damping;
  • a rotor with an eccentric and a pulley is installed on the plate separately, which must be located strictly coaxially with the engine pulley;
  • put on a tension belt that will transmit energy from the motor.

The finished vibrating plate is started and checked for operability, and then, if necessary, the detected problems are corrected.

It is recommended to cover the rotor at the front of the device with a protective cover for safety.

How to make an electric vibrating plate from a walk-behind tractor with your own hands

The easiest way to make a vibrating plate with your own hands is to use an old single-axle tractor. The device is equipped with an internal combustion engine with optimal performance, suitable for DIY construction.

Making a vibrating plate with your own hands looks like this:

  • a steel sheet of about 1 x 1 m is cut along the edges and bent upwards with a hammer so that the plate does not sink into the ground during operation;
  • channels are welded parallel to the bent sides, about 10 cm from the central mowing line of the workpiece;
  • install a homemade or factory vibrator on them;
  • in the back of the plate, with the help of metal corners and shock absorbers, a platform for the engine of the walk-behind tractor is fixed;
  • using nuts and washers, a motor is installed on it and a belt thrown over the pulleys is connected to a vibrator;
  • attach a long handle to the rear platform to control the unit.

The average weight of a homemade vibrating plate with an engine from a walk-behind tractor is about 60 kg. If a heavier structure is required, you can additionally weld metal sheets or reinforcement onto it.

The pulleys should provide the vibrator eccentric with a rotational speed of about 180 revolutions

How to make a homemade vibrating plate with a gasoline, electric motor

A do-it-yourself vibrating plate with an electric motor is a useful repair tool. It’s easy enough to make it if you read the proven instructions.

A vibrating plate with an electric motor with your own hands is a simple unit. For its manufacture, it is enough to have a small motor and a steel sheet, as well as an angle grinder and fasteners.

Appointment of vibrating plates

A vibrating plate is a mechanism designed to compact loose soils and bulk building materials. In addition, such a mechanism is widely used for vibration processing of semi-dry concrete mixtures and asphalt when constructing floors and sidewalk surfaces. The use of such a tool is very effective in the case of working in a small area of ​​the personal plot and in tight spaces.

Homemade electric vibrating plate.

The arrangement of sidewalks, garden paths, driveways and parking near a private house with the help of a vibrating plate is much faster, while ensuring a high quality of work. Compaction of the bottom of trenches during the laying of engineering communications excludes their possible damage in the event of subsidence of loose soil. These and other advantages encourage many DIYers to make such equipment on their own and use it when performing construction work.

How to make a vibratory rammer with your own hands?

The high cost of construction mechanisms, tools and equipment forces people to look for alternative solutions to the issue of technical equipment. One of the options is to make the equipment yourself. And today craftsmen, at relatively low cost, having technical skills and hard work, create excellent machines for various purposes.

Scope and principle of operation

Vibratory plates are actively used during construction and repair work of varying complexity, for example, when laying roads or sidewalks, etc. The unit has a small size, which allows it to be used in hard-to-reach places, including trenches. The tool design consists of four main elements:

  • Work plate made of steel or cast iron.
  • Vibrator.
  • Frames.
  • Power plant.
make, electric, vibrating, plate

The base of the unit is a massive plate, in the center of which there is a vibrator. It is connected to the power plant using a V-belt drive or clutch. A vibrator is needed to convert rotary motion into oscillatory motion. Internal combustion engines or electric motors can be used as the power plant of the unit.

Types of plates used

Homemade designs require a power plant that provides the main work. Three types of motors are often used:

Diesel engines are appropriate when a lot of effort is constantly required. In everyday life, they are unjustified. Although it is not uncommon to find a vibrating plate from a walk-behind tractor with an installed two-stroke motor.

Apparatus with a gasoline engine, like previous designs, are autonomous, but extremely noisy in operation. An economical engine with a power of several watts is selected for them.

The recommended engine power is 1.5-2 kW at 4000-5000 rpm. Less power will not give the required shaft rotation speed, respectively, the vibration force will be insufficient

The optimal solution for many is an electric vibrating plate assembled by hand. It is enough to bring electricity to the place of work on the site and you can start compacting the soil. The positive factor is the absence of exhaust gases during the process.

According to the classification, it is customary to divide products into several groups:

  • lungs. weight less than 70 kg;
  • universal. up to 90 kg;
  • medium weight. 90-140 kg;
  • heavy group. over 140 kg.

The first group is appropriate for processing the local area, where it is supposed to press a layer of no more than 15 cm.Universal actual for processing 25 cm.Heavy devices are designed for 50-60 cm.

The larger the compacted layer, the heavier the machine must be

It is important to correctly select the electric motor for the vibrating plate. After all, a too weak model on a massive slab will sink in soil layers. The optimal ratio is considered to be when 5 hp are used per 100 kg of mass. or 3.7 kW.

ASF74 Blog Homemade vibrating plate from scrap metal at hand.

I found a 10mm slab meter by meter in the bins of the garage. I decided to make a vibrating plate, who was built knows how it is needed. Just in stock there was a 1.5kW 380 motor. Of all costs:. 2 bearings of a VAZ 2121 (460r) distributor. 2 internal combustion engine pillows 2101 (500r). a pump pulley (180r). Niva generator pulley (200r) and starting capacitors for switching the motor to 220v (1200r).

Calculation of capacitors 7 microfarads for every 100W of the motor, totaling 105-110mF. Everything else was at hand: This is the 50th pipe and a bunch of old garage sheds. The eccentric of the vibrating shaft was made from these canopies and pipes. The bearing housing was made of the same pipe. The gearbox support from some kind of jeep for the third engine support was also useful. On the pictures is the manufacture of an eccentric, and later on the whole video. Already started ramming as I wanted.

How to make a vibrating plate for soil compaction with your own hands

A vibrating plate can be a useful tool in your home garden. If you do not plan to carry out a large number of work on compacting the soil, then the unit can be rented. However, with frequent use, it is advisable to make a vibrating plate with your own hands. It has a fairly simple design, and the manufacturing process does not take much time, and also does not require large financial investments.

How to Make a Simple Electric Power Vibration Device at Home