How to put a trimmer head correctly. How to do it with your own hands

Learning to correctly wrap the fishing line for a trimmer to the coil of a trimmer for grass and lawn mowing instructions for installation

Owners of private houses know how necessary the type of tool is such as a trimmer for grass. It can be gasoline and electric, and they differ in the design of power units. For injection of grass in areas where there are stones, trees and other obstructing objects, a fishing line for a trimmer is used as a cutting device. This consumable in the process of use wears out, so how to wind the coil of a trimmer for grass, we will consider in detail in the material.

Fishing lines is called consumable, which consists of nylon, and serves as a cutting device. Through this equipment, the grass grows, which is ensured due to rotation of the instrument head with a high frequency. This material has a different thickness, which depends on its use on the corresponding tools of low-power (from 1 to 1.6 mm), electric from 500 W (2-2.4 mm) and gasoline trimmers for grass with motorcycles (from 2.4 up to 3.2 mm).

The more powerful the tool, the accordingly there should be a cutting equipment. This affects not only the quality of the injection of grass, but also on the life of the material. If you ask the question of how to wind the coil of a trimmer for grass, then it’s time to change the reload of the tool. With the onset of spring, this issue is becoming more and more in demand, so it’s time to understand the step.by.step instructions for replacing the fishing line in the coil of the trimmer for grass.

How to remove a coil from a trimmer for grass and extract a fishing line for a trimmer

Initially, before filling the fishing line for the trimmer to the coil of the trimmer for the grass, it is necessary to extract it from there. Coil or tip is a device that is located inside the braid, bobbin or drum. The heads are of different types (depending on the manufacturers), however, the principle of replacing the fishing line on the coil has the same. First of all, we will figure out how to remove the head from the tool, as well as how to get a drum with a fishing line from it.

It is interesting! The replacement of equipment can be done directly on the tool, but if you do it for the first time, it is still recommended to remove the head, and study the detailed process of winding. After the technology is mastered, you can perform work on replacement on a trimmer of a motorcycle or a gas station.

Instructions on how to promote a hand head on a trimmer, has the following look:

This process is not difficult, and as you know, it is not necessary to dismantle the entire head if you know how replacement is performed. When dismantling, consider the following nuances:

• It is recommended to remove the head periodically to prevent the corrosion of the threaded connection. If you never unscrew the screw, then if necessary to do it will be difficult and even sometimes impossible
• If the screw has a tetrahedral boring of the head, then for twisting you should select a screwdriver or bit of a suitable size to eliminate the licking of the faces on the head
• When assembling the installation, a threaded seat should be treated with lubricants, for example, solidol or machine oil
• If the edges on the screw are licked, then for its unscruptions you can use special clamping forceps
• There are drums that do not require preliminary disassembly. To dismantle them, you should take up it, and rotate in the opposite direction of the direction of the clockwise

Knowing how to disassemble the drum, you should continue to clarify the process of replacing a trimmer fishing line for grass. Below the video shows a detailed process how to open a trimmer coil for grass and disassemble it.

Types of heads for trimmers

A trimmer is a tool that is used to combat vegetation in a summer cottage or household territory. Grassing and hay harvesting for cattle implies the use of benzo or motorcycle. The heads of different types are installed on trimmers for the grass, through which the grass and other vegetation occurs.

The heads are classified into three main types that differ not only in design, but even in price, the method of operation and service life. Consider all types of heads for trimmers, as well as their technical features.

Manual or mechanical coils their purpose and application

The first trimmers for grass were produced with manual types of coils that have a primitive design. They consist of a plastic or metal disk in which there are holes for fixing the fishing line. The holes have the corresponding size, which allows the cord (fishing line for a trimmer) of a certain diameter. However, this is not the only drawback of equipment, since another minus is the need for frequent fishing line refueling. Below is a variant of the simplest coil with a fishing line for a trimmer for grass.

Following the simplest coils, mechanical head heads appeared, inside which a bob is installed with a fishing rod. Such devices are excluded deficiency of the fast consumption of the cord, however, to serve a new fishing line, you should interrupt the work on the injection of grass. To supply the cord, the head is equipped with a manual regulator, through which the fishing line stretches. Today, the manual type models are rarely used, which is associated with their great drawback. the need to interrupt the work and drown out the engine in order to lengthen the cord.

Removing and disassembling the coil

The braid trimmer head consists of a casing, a spring (not in every model), bobbins with a cord, cover. Before proceeding to disassemble the coil of the electric unit, be sure to turn off the trimmer for the grass from the network. The disassembly method depends on the mounting of the mowing head. First option:

• To remove the lid covering the inside of the head, click on the latches (latches), which are located on its two sides.
• Remove the lid under which you will see the spool. remove it from the body. Some trimmers have a spring under the bobbin coils, which should also be carefully pulled out.
• Removing the bobbin, you will see the screw in the center of the case. Unscrew it with a screwdriver.
• After extracting the fasteners, take the case body and, shaking it in different directions, remove the gearbox from the shaft.

In the second version, the head of the trimmer for the grass is twisted onto the shaft of the gearbox. To remove it, you need to fix the shaft. To do this, in such devices there is a hole through which a thin screwdriver or metal rod is inserted. Brief Instruction:

• Insert a screwdriver into a special hole, then stall the shaft.
• Get the body of the head and start twist it. This should be done clockwise, t. to. Larva shaft thread.

Fishing winding

Tramoring the fishing line in a trimmer coil for grass is a relatively simple procedure, provided that you adhere to a certain algorithm of action. When you need to determine how many meters of consumables are enough, wind it on the bobbin so that the skein does not exceed the diameter of the sides. Having decided on the length of the cord, follow the following instructions:

• Fold the consumable material so that one end of the fishing line is 10-15 cm longer than the other.
• You need to start charging with the central side, which divides the backpack of the trimmer for the grass into 2 parts. Find a groove where the cord should be inserted. The latter is bent twice.
• Determine in which direction you need to wind the fishing line for the trimmer. To do this, take a look at the bobbin on which there can be an arrow or inscription. She indicates the side of winding. If there are no designations on the coil, then look at the arrow on the mowing head. carry out windings in the opposite direction.
• Wash the consumable material carefully, a round to the round. Try to adhere to maximum thread tension.
• After completing the cord laying, fasten first the short end of the material. To do this, insert it into the groove on the side of the coil, which is suitable in diameter. The second end (more authentic), attach to the groove on the other side of the backpack of the trimmer for the grass.
• By fixing the fishing line for the trimmer, cut its ends. Do not forget to leave allowances about 10 cm.
• Install the refitted coil to the mowing head of the device. To do this, you need to insert and pull the thread alternately into the weekend of the head, then place the keyboard of the device in the skin.
• By applying the required force, pull the cord from the fixing grooves and tighten the material. At the end of this action, put on the lid and fix it using the latches.

You can wound a cord for a trimmer for grass in another way, in which two segments of the material are charged instead of one. The replacement is carried out like this:

The main malfunctions of the coil

Users of the electrimmer and lawn mower often face a problem associated with a semi.automatic braid head. Coil malfunctions can be as follows:

The fishing line for the trimmer does not extend automatically

If, with a light blow, the trimmer coil button for grass on the ground is not lengthened for a trimmer, then the reasons for this may be the following.

Option 1. there was a snack, t.e. Squeezing the cord between turns. This problem usually appears if the user wound a fishing line for a trimmer to the coil unevenly, with the intersection of the turns, or wound it with insufficient tension. In the latter case, when the mowing head is rotated at large revolutions under the influence of centrifugal force, the cord begins to drag on, as a result of which the interitral clamping of the fishing line is possible. To eliminate the problem, you will have to disassemble the coil on the trimmer and rewind the cord correctly, that is, with even turns with good tension.

Option 2. too short ends protrude from the head. A fishing line for a trimmer may not exit when hitting the ground, if its ends sticking out of the head, insufficient length (short). In this case, the centrifugal force is not enough for the fishing line for the trimmer to stretch. Therefore, it is required to stop the unit (drown out the engine or turn off the ethletric trimmer for grass from the network) and pull the fishing line for the trimmer manually, after pressing the button.

Option 3. a fishing line for a trimmer was soldered inside a mowing head. This leads to the fact that the coil is stopped and does not spin when the button is pressed. Basically, this happens for several reasons: poor quality of the cord, overheating of the coil with prolonged operation of the unit, a fishing line on solid items.

• In the first case, the cord of third.party manufacturers can be made of low.quality and fusible materials that do not withstand the mechanical and temperature load. Therefore, preference should be given to “branded” fishing.
• But, if you still purchased a fishing line for a trimmer of unknown quality, and it is often soldered during operation, then you can follow the example of some users who, after refueling the cord, moisten it either with silicone grease (from the spray can) or mineral oil). This procedure greatly reduces the likelihood of soldering a fishing line among themselves.
• Also, a fishing line for a trimmer can sleep if during a mowing it hit a hard object (stone, fence, dry branch, etc.D.). As a result of this, it is slightly stretched and draws back into the head with high speed. The cord is heated from friction, and its turns are sticking together. The only thing that can be done to eliminate this malfunction is to open a trimmer coil for grass and rewind a fishing line for a trimmer.

The cord spontaneously lengthens

There are situations when a user of a trimmer for grass notices a very fast fishing line consumption. At the same time, he never hit the ground with a button to lengthen the fishing line. The reason that the fishing line for a trimmer spontaneously lengthens, cutting off a special knife on the casing of the device, may be the absence of a spring in a mowing head. Often beginner users of mowers, trying to charge a fishing line for a trimmer into a coil, forget to install a clamping spring in the head, or completely lose it when opening the lid, and in the future, they do not even suspect its existence.

Also, a fishing line for a trimmer can lengthen without using a button if the spring is weakened. If the spring check confirmed this fact, then it is necessary to put several goals under it to strengthen its clamping properties.

Master class: weaving from wire pendant “Tree of life

Spring fully entered into its legal rights and we considered that today’s master class on weaving the wonderful pendant “Tree of Life” from the wire would have to be just in the topic. After all, what is spring, if not a revival of life after a long sleep? The ancients unsusually imagined the annual cycle of the seasons precisely as a consistent movement of nature from birth to death, and spring quite naturally symbolized its birth.

The very symbol of the “Tree of Life” is found in almost all world cultures.

Be that as it may, the image of the tree has a unambiguously positive meaning, symbolizing the unity of nature and the eternal cycle of life.

In our master class, we will use the Celtic version of this symbol, which in the modern world is most widely used and is often used in the production of decorative products, jewelry and cult attributes.

We wish you a pleasant and, most importantly, successful creativity!

Sketches “Tree of Life”, they are quite easy to find on the Internet.

How to remove a coil from a trimmer for grass and extract a fishing line for a trimmer

Initially, before filling the fishing line for the trimmer to the coil of the trimmer for the grass, it is necessary to extract it from there. Coil or tip is a device that is located inside the braid, bobbin or drum. The heads are of different types (depending on the manufacturers), however, the principle of replacing the fishing line on the coil has the same. First of all, we will figure out how to remove the head from the tool, as well as how to get a drum with a fishing line from it.

It is interesting!The replacement of equipment can be done directly on the tool, but if you do it for the first time, it is still recommended to remove the head, and study the detailed process of winding. After the technology is mastered, you can perform work on replacement on a trimmer of a motorcycle or a gas station. Instructions on how to promote a hand head on a trimmer, has the following look:

• Turn the instrument with the head to the top, and if necessary, cleanse it from pollution. Take two fingers of one hand by the cover of the cover (on the mowing head), which are located symmetrically to each other. After a light pressed inward, dismantle the protective cover from the drum
• Next, from the rampart of the drum, the coil for the fishing line should be removed. It is planted on a shaft without fasteners, so it is dismantled with one hand
• The main part of the drum is fixed using a screw, which must be twisted with a screwdriver with an appropriate tip or a bat
• To twist it, it is necessary to hold the base of the drum with one hand, and the second to remove the screwdriver against the direction of the clockwise
• After that, you can proceed to dismantle. To do this, you do not need to pull it with all your strength, but slightly shaking it, slowly remove it from the hook with a metal shaft on which the drum is planted
• When installing the installation, the head should be planted in a tetrahedral slot

This process is not difficult, and as you know, it is not necessary to dismantle the entire head if you know how replacement is performed. When dismantling, consider the following nuances:

• It is recommended to remove the head periodically to prevent the corrosion of the threaded connection. If you never unscrew the screw, then if necessary to do it will be difficult and even sometimes impossible
• If the screw has a tetrahedral boring of the head, then for twisting you should select a screwdriver or bit of a suitable size to eliminate the licking of the faces on the head
• When assembling the installation, a threaded seat should be treated with lubricants, for example, solidol or machine oil
• If the edges on the screw are licked, then for its unscruptions you can use special clamping forceps
• There are drums that do not require preliminary disassembly. To dismantle them, you should take up it, and rotate in the opposite direction of the direction of the clockwise

Knowing how to disassemble the drum, you should continue to clarify the process of replacing a trimmer fishing line for grass. Below the video shows a detailed process how to open a trimmer coil for grass and disassemble it.

How to wind a fishing line for a trimmer for grass?

When refueling the fishing line for the first time, this process may seem quite time.consuming, but over time and dexterity, the problem is solved much faster.

In order to refuel a fishing line for a trimmer, you need:

• Take a coil, unscrew its lid. On some coils, the thread is done to the left, so the lid needs to be unscrewed in the required direction.
• Measure five meters of fishing line;
• Fold this segment in half, that is, determine where the middle is;
• Next, place this middle of the fishing line in a special hole on the coil;
• Wind a fishing line for a trimmer to the side, where the arrow points;
• If there are two places for winding, then the first part of the fishing line should be wound for one half of the coil, and the second part should be on the other half;
• Stick both ends of the fishing line in the holes of the coil;
• Twist the lid.

How to change the reel on the trimmer

Coil with one working osik

The easiest option and a simple sequence of actions:

• The dimensions of the bobbin and the length of the original factory winding determine the length of the fishing line recommended for winding. 2 5 m.
• One end of the fishing line is inserted into the fixing technological hole located inside the spool.
• The fishing line for the trimmer is wound on the drum in reverse rotation of the spray in the trimmer product direction. as a rule, on the inside of the bobin, the arrow indicates which direction the winding is carried out.
• A small section of the fishing line is left free to output it. it is fixed in a specialized border on the inside of the bobbin, designed to keep the winding when assembling a spool in working condition.
• The left end of the fishing line is passed through the hole of the outer part of the bobbin.
• Half of the bobbin are collected and put on the bar of the trimmer device.

How to remove the coil and replace the fishing line for the trimmer

The owners of the trimmers, mainly beginners, confuse, bordering on panic, when it becomes necessary to change the cutting tool or fishing line for a trimmer in a reel. Very often, when trying to unscrew the mowing head, users simply make it unusable, not suspecting that it is unscrewed in the opposite direction. So that this does not happen, if you need to replace the tool, it is recommended to familiarize yourself with the step.by.step instructions given below.

• Before refueling the fishing line for the trimmer to the coil, drown out the engine of motorcycles or de.energize the ethletric trimmer for the grass to avoid injuries that may occur in case of accidental rotation of the cutting tool.
• Unscrew the nozzle mounted on the gearbox shaft. To do this, the shaft must be fixed by combining holes on the puck and on the axis, and inserting a metal rod or screwdriver into them.
• Unscrew the nozzle. You should know that the thread on the shaft is left. Therefore, to twist the coil of the trimmer for the grass should be right, that is, clockwise.
• Disassemble the mowing head. Most often, the head cover is attached to the fixers. To remove it, you need to drown these latches into the body, pressing the edges of the lid. If your trimmer has a semi.automatic mowing head, which has a button from below, then disassembling the nozzle should be done carefully, since you can lose a spring that sometimes flies away when removing the cover.
• Cut the required amount of fishing line. Usually its length is 5 meters. Use the cord of the diameter that is indicated in the instructions for the tool. It is not recommended to exceed the maximum diameter of the fishing line, since this will lead to increased load on the engine and greater consumption of gasoline.
• Find the middle of the segment of the cord, folding it in half. You will get a loop.
• Special grooves are cut out inside the coil (there may be holes). Insert the loop from the fishing line into this groove.
• Wind a fishing line for a trimmer to a coil, turning it counterclockwise. You need to refuel the cord as evenly as possible, the turns should be laid without ceiling and with good tension. When the winding is finished, leave the free ends of the fishing line about 20 cm long and fix them in the grooves located on the sides of the coil.
• Collect the braid head. Before you finally collect the nozzle, do not forget to insert a spring and washer (if it is available). Install the coil in the case, and prone the ends of the cord through the holes or eye.
• Dress the lid and fix it with latches.
• Screw the nozzle back to the gear shaft, also fixing it with a screwdriver. Tighten the coil of the trimmer for the grass will need to go to the left (against h. Arrows).

ATTENTION! Typical problems with fishing line

No wonder they say: “”Forewarned is forearmed “”. Knowing the possible problems and causes of occurrence, one can prevent them in a timely manner. We recommend remembering or leaving a memo.

For a better understanding of the mechanism of the process of replacing fishing line in a spool with video assistance prepared by Fubag specialists:

Method 1. how to correct the fishing line for a trimmer or put it on a coil and choose the required length

To implement this method, you will need to pre.prepare a fishing line for a trimmer of the required length (usually up to 4 meters). It all depends on the thickness of the equipment used, as well as the design of the coil. There is a simple way to find out the required amount of fishing line, the refueling of which will be needed to charge the coil. To do this, the equipment should be wound inside the coil until it is equal to lateral protrusions. At the same time, the equipment should not go out for these extreme ledges.

The thicker the equipment used, the less its length will need and vice versa, the thinner, the longer the segment will need.

Instructions on how to properly tie the equipment into a tip of a trimmer for grass or motorcycles is the following look:

• To begin with, a segment of the fishing line, which was prepared to install in a coil, must be folded in half. In this case, one edge should be more than the second by 10-15 cm
• After that, the second end is taken from the other side, and doubles. Move to it so that the measured ledge 15 cm is preserved
• There is a slot in the internal partition of the coil, into which the resulting loop should be brought. The slot in the wall is shown in the photo below
• Next, find out the direction of the winding of the fishing line. If you wrap the equipment in the wrong way, then it will not function correctly, and you will need to redo the work. To insert a fishing line for a trimmer, and wind it in the right direction, you should examine the surface of the coil. It should indicate the direction of winding (in 99% of cases this direction is indicated). What does the direction indicator look like on the coil shown in the photo below
• This indicator in the form of an arrow can also have a designation, as an example above “Wind Line”, which means the direction of winding. If the arrow indicator is absent on the coil, then you need to look at the head. There is a direction of its rotation on the head, and in order to correctly wind the fishing line for the trimmer, you should wind it on the drum in the opposite direction of the indicator of the arrow pointer. So, if the shooter is on the tip, then you need to wind in the indicated direction, and if it is not there, then you should wind against the direction of the arrow on the surface of the head
• Having decided on the direction of rotation, you should proceed to the winding. Each end should be carried out in its groove. If there is no separator, then the equipment is necessary in the corresponding distribution order
• When almost the entire fishing line for the trimmer is wound on the coil, you will need to perform the following-place a short part in the hole of the side wall of the tip, which should be up to 10-15 cm, and then similarly to do the procedure with another end, placing it in the holes from the parallel side
• We insert the coil into the head, pre.letting the ends of the fishing line into the holes of the drum
• We install the drum in place and, pulling the ends of the fishing line, remove them from the engagement with temporary clamps in the coil wall. After that, you can put on the lid until the latch is triggered
• On this, the process, how to replace a fishing line for a trimmer on a trimmer, is completed, and if necessary, only the ends can be cut (if their length does not suit), and install the drum in the assembled form on the tool

With how to put the drum in place, no difficulties arise. There is a second way to charge mowing equipment into a motorcycle. How is it different, and how the second method of refueling the fishing line to the coil of motorcycles is carried out, we will find out in detail.

The process of replacing the fishing line

For each trimmer, the manufacturer recommends a fishing line for a trimmer, or a cord, a certain diameter. a coil is made under it. It can be from 1.2 to 4 mm: you need to see according to the instructions what size of the fishing line is permissible for your tool. For example, many trimmers with the maximum value are 3 mm (recommended for hard grass). the thicker cord can not be installed.

A thin fishing line for a trimmer, 1.2. 1.6 mm, is suitable for mowing young, soft vegetation

Also, when choosing, pay attention to the structure of the cord: round is the most durable and suitable for rough grass, curly. for soft, twisted or with notch. for thin stems. Depending on what grass grows on the site. lawn or wooden, buy appropriate consumables

It’s important to know! Buy only a branded fishing line for a trimmer recommended by the manufacturer of a trimmer for grass

It is made of high.quality materials and has strength. it will perfectly cut the grass and not wear out so quickly

It’s important to know! Buy only a branded fishing line for a trimmer recommended by the manufacturer of a trimmer for grass. It is made of high.quality materials and has strength. it will perfectly cut the grass and not wear out so quickly. Useful advice: place a segment of the cord in the water for 30 minutes, then it will become more elastic and stronger

Useful advice: place a segment of the cord in the water for 30 minutes, then it will become more elastic and stronger.

The fishing line for the trimmer is wound on the spool, which is hidden in the body of the trimmer head. To get to it, you need to disassemble the element. The housing is provided with latches-fixers, when clicking on them, the cover cover is easy to remove. Sometimes disassembly is carried out by promoting the body.

be careful! Remember in what sequence the elements are installed, how a spring and a fixing screw are located inside the head. Gently fold all the details in one place so that nothing is lost and there are no problems during assembly.

We offer to familiarize yourself: catching pikes on a wobbler. simple rules

We described how to wind a fishing line for a trimmer into a coil of a trimmer for grass with two antennae. This is the most common option. But there are other ways. For example, if there is one antennae in the mowing head, then the winding is carried out without folding a fishing line for a trimmer. They rotate in the direction indicated on the corps of the spool, and the free end of the cord is temporarily fixed in the slot on the case.

Useful advice: act carefully when winding the fishing line, do not pull it so that it does not sit in the coil very tightly. It is necessary to ensure its free move for subsequent stretching.

After the fishing line for a trimmer is windpoint on the spool, it is necessary to assemble the case. The coil is placed so that the ends of the fishing line can be pulled out at the weekend of the trimmer head. Slopes in the spool, where they were temporarily inserted, will not let them slip. If there are no such slots, hold the ends with your fingers when you place the coil in the body.

Preliminary preparation

First of all, to wind the fishing line, it is required to remove the coil (bobbin, spool) from the trimmer for the grass. specific actions will depend on the complexity of the configuration and the type of product itself:

• Small electric trimmers for grass with a working location of the engine and coils in the lower part, as a rule, have side keys on both sides of the bobbin. With the simultaneous press on them, the upper part of the coil, along with the internal contents for winding the fishing line, is disconnected, while the lower remains on the trimmer. It is advisable to analyze the bobbing in an even smooth place, so that the spring does not jump out and not be lost;
• Electric and gasoline trimmers for grass with a curved rod without the ability to install a knife, as a rule, have coils with a special lamb: in such structures, you should hold the spool in a fixed position with one hand, and rotate the fixing bobbin on the bar with a barack’s baracks. After disconnecting the nut, the whole bobin is removed.
• Electric and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and, with slow rotation, such a mutual arrangement is achieved when the screwdriver enters the hole and the bob is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third cases, the coil, depending on the design, are versed in various ways. In the bobbins with a lamb, lamb is twisted, in the reels with latches, latches-fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then it is enough to turn them with your hands in the opposite directions until they are completely developed.

Two working antennae

In this type of spools, the number of grooves for winding the fishing line lying on the inside of the coil should be determined:

How to replace a fishing line for a trimmer on a trimmer how to wind a fishing line for a trimmer for a trimmer for grass

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.captable coils, the fishing line for a trimmer stretches into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the back of the rotation of the bobbin on the bar the side. inside the arrow is usually indicated the correct direction of the winding. In the presence of fixing grooves, the ends of the fishing line are threaded in them or hold their free arm fingers, spread into the through hole of the outer half of the bobin, the spool is closed and attached to the bar of the trimmer product.

The difference between the winding of the fishing line in the two-to-dancing coils is that initially a line of fishing line 2-5 m long is folded in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves. Both strains of the fishing line are wound each in its own groove, fixing the antennae and assembly of the coil is similar to the option considered above with one groove.

The first implementation of this procedure may seem long and quite time.consuming, but over time and experience, this task will be solved much faster and easier.

The video below will clearly show how to refuel a fishing line for a trimmer to the coil of a trimmer for the grass and correct it correctly. this operation is not a complicated one and, with some patience, will necessarily be crowned with success:

Coil with one working osik

The easiest option and a simple sequence of actions:

• The dimensions of the bobbin and the length of the original factory winding determine the length of the fishing line recommended for winding. 2 5 m.
• One end of the fishing line is inserted into the fixing technological hole located inside the spool.
• The fishing line for the trimmer is wound on the drum in reverse rotation of the spray in the trimmer product direction. as a rule, on the inside of the bobin, the arrow indicates which direction the winding is carried out.
• A small section of the fishing line is left free to output it. it is fixed in a specialized border on the inside of the bobbin, designed to keep the winding when assembling a spool in working condition.
• The left end of the fishing line is passed through the hole of the outer part of the bobbin.
• Half of the bobbin are collected and put on the bar of the trimmer device.

Read trimmer for grass gasoline Patriot Pt 4355 Imperial review

The choice of fishing line

In order for the dressing of the fishing line to the trimmer head to be successful, it is important not to fail to choose the consumer material. The thicker the cord you refuel, the more thick and hard grass it can cut. A universal fishing line for a trimmer is often used, the diameter of which is 2 mm

You can choose the diameter suitable for the mower in the following ways:

A universal fishing line for a trimmer is often used, the diameter of which is 2 mm. You can choose the diameter suitable for the mower in the following ways:

See the information about the thickness of the fishing line in the instructions attached to the trimmer

Pay attention to the squash itself. Sometimes information is applied on it about possible fishing line diameters

Another option is to try to insert the cord into the output

If it easily passes into it, then the selected fishing diameter is suitable for use.

You can choose a cord thread by type of engine. If the fishing line for the trimmer is too thick, then the resistance to rotation will increase. the engine in this case will overheat and will soon fail. Useful recommendations:

• For an electric device with an engine of less than 500 in, a thread of 1.3 mm thick is suitable. If this was not found, then you can use a fishing line for a trimmer by 1.6 mm. If the power is more than 1 kW, then select a cord with a diameter of 2 mm.
• The gasoline trimmer for grass has a shaft mower. For the bent version, the cord for 2 mm is often used. If the shaft is straight, then set the thread 2.4–2.5 or 3 mm. The thickest fishing line for a trimmer is installed on powerful devices. from 1.3 kW.

Pay attention to the type of cross section of the cordry thread. Some popular options:

• The most common fishing lines with a round section. They mow fresh herbs well, but they cope worse with shrubs, drows.
• Twisted (spiral) cord does not differ in high strength, but well suitable for thin young grass.
• The jagged thread with sharp edges is ideal for a large weeds in a neglected area.
• You can mow the lawn in a rectangular, starry or square fishing line for a trimmer for grass, but they are not very durable.
• The most durable is a two.component cord with an internal core and a round section.

Keep in mind that it is impossible to use wire, metal strings and cables, as well as an ordinary fishing thread. The device will be dangerous for both the user and for others. So the cable or similar products will gradually begin to shut down, as a result, their ends will be reacted, and small pieces will scatter at high speed.

Publications

Device and adjustment of the carburetor on benzocos and trimmers

What is the difference between a two.stroke engine and what is 4MIX and 2MIX