How will it start after winter?
Starting a lawn mower after the winter can be quite challenging, as most of the time this type of appliance is stored in sheds without heating, which means it is exposed to the harsh winter climate, and sometimes to sudden temperature changes. Therefore, it is necessary to approach this process wisely and take into account all important nuances.
For example, the first thing after a winter shutdown is to check the fuel tank of the device to make sure it is clean and there is no old fuel. If the tank is not empty, then it should be cleaned before refueling. This must be done because adding new fuel to the old one that has survived the winter downtime is unsafe for the device to function. Old fuel, under the influence of the winter temperature regime, can slightly change its composition, which, when mixed with a newer composition or even with simple operation, can lead to malfunctions.
Further, for safer operation, you should act on the principle of turning on the device with the engine warming up. This allows you to gently prepare your lawnmower for use.
When starting such a technical unit, some problems may arise, and in order to understand why the lawn mower does not start, it is necessary to identify the reasons, and for further work. Eliminate them.
The main reason for problems when starting the lawn mower may lie in the fact that there is no gasoline in the fuel tank or there is not enough gas to operate the device. In this case, it is obvious what needs to be done. Fill the tank with fuel, and in order to prevent such a situation, it is necessary to check the presence of gasoline in advance.
Failure to comply with the rules for preparing fuel mixtures, as well as the use of low-quality raw materials in order to save finances, can also lead to errors when starting and when operating the lawn mower. The way out in this situation is simple. It is necessary to carefully choose the finished fuel, as well as carefully observe the proportions when preparing the mixtures with your own hands.
Starting errors can occur because fuel can flood the spark plugs. This is due to prolonged exposure to the starter rope when the air damper is closed. To prevent this, it must always be checked and, if necessary, returned to the correct position.
Naturally, if you start the lawnmower with the ignition off, you may fail, because without this the device cannot function.
Step by step instructions for starting
To easily start the lawn mower, you need to read the Step-by-step instructions in more detail, but you also need to take into account the rules for refueling the device with fuel, as well as many other fundamental nuances.
Before starting, only gasoline models need refueling, the engine of which, without correctly selected fuel, will not work correctly or will NOT start at all. Therefore, having studied in more detail the technical characteristics of your device, you must also get acquainted with the information in the finished fuel or in the preparation of a special mixture with your own hands.
In the latter case, it is necessary to observe the proportions, which are specially calculated for the correct functioning of the mechanism.
Sometimes synthetic oils are used for this. These types of fuel mixtures have a lower cost, but practically do NOT differ in their quality characteristics. For 100 grams of synthetic oil, 5 liters of gasoline must be used, so the mixture will have proportions. 1: 50.
Mixtures with mineral oils have a higher cost, since they are considered more natural and environmentally friendly, but in terms of technical characteristics, they are only slightly superior to synthetic options. The proportions when using such materials will be 1: 35, that is, 3.5 liters of gasoline should be used per 100 grams of oil.
There are also petrol lawnmower options where the fuel tank is separate from the oil sump, so no mixing is necessary.
How to start a lawn mower correctly?
- Step by step instructions for starting
- Common mistakes
- Possible breakdowns
- Instrument operation rules
Every gardener or person who lives in a country house on a permanent basis should have a lawn mower, which will greatly facilitate the care of the lawn located on the territory of the site or around it.
And in order for such a technical unit to serve you for many years, it is necessary not only to properly and carefully operate it, but also to know how to properly start the device and prevent possible breakdowns associated with this process.
Despite the difference in the characteristics and appearance of various device models, they still have the same causes of breakdown, therefore they practically do NOT differ in the way of elimination.
The most common problem with the device is that it does not start or stalls when you press the gas. The reasons lie in the improper functioning of the carburetor or ignition, as well as problems with the filtration system.
If the reasons lie in the operation of the ignition system, then you need to act as follows.
- Make sure you are using fully functional spark plugs and that there are traces of fuel on them. If the candle is flooded, it is recommended to thoroughly clean it, since otherwise the operation of the device will be impossible.
- If the threaded connection is too dry, problems may arise during starting, because without lubrication with gasoline, a spark can NOT appear or its power will not be enough to work.
- If the ignition system breaks down, you should also check the contact between the spark plug and the high-voltage wire, since if it is absent, the occurrence of a spark will be impossible, as well as further operation.
If the device stops working after 5-10 minutes after starting operation with a load at high speeds, the reasons may lie in problems with the air and fuel filtration system:
- The filter can be clogged, so when it heats up, the system stops cleaning properly and turns off;
- The reason may also lie in the fact that the part responsible for adjusting the pressure in the fuel tank becomes dirty and blocks the fuel supply.
There are also more serious breakdowns, which can be quite difficult to cope with.
- The channels and nozzles of the device can be seriously contaminated, so you cannot do without a drop cleaning. And in order to clean them correctly, you need to use professional tools and blow through the parts with a powerful air flow.
- Often the gaskets, which are an integral part of the system, wear out and also cause a failure in the working system. They cannot be repaired, so you just need to replace them.
- Worn pistons in service can cause damage. That is why it is necessary to follow the details and, if necessary, change them.
- In addition, a breakdown in the carburetor space may be a prerequisite for a breakdown.
Depending on the model of the lawnmower, starting will be done in different ways. Therefore, it is necessary to take this into account and, comparing with the individual technical characteristics, proceed with connecting the device and starting the engine.
And if everything is quite simple with a manual model that works on the principle of a conventional scythe, then when starting a gasoline model, some difficulties may arise.
The gasoline lawn mower can be started in two ways. Cold or warm engine.
Before starting a cold engine, you need to take care of turning off the ignition and transmission systems, and also turn the engine shaft with the starting lever or starter. After that, you can start launching, proceeding as follows:
- First you need to turn on the ignition;
- Then you need to close the air damper;
- After that, you can safely start starting the engine.
After starting, you need to set the idle speed on the device, using the throttle lever. Then, using the same lever, you need to transfer the device to work at low revs, giving the very engine the opportunity to warm up. After that, you can safely start using the lawn mower at full power. It should be noted that starting the device with a cold engine is permissible, but further operation in this state is undesirable, since this will negatively affect the general condition and functioning of the lawn mower.
Starting the lawnmower with a warm engine is much easier as the process requires no prior preparation. In this case, actions must be performed in the following sequence:
- The control lever must be switched to the fuel supply mode at the maximum level;
- Then you need to start the engine;
- Then you can select the required speed and start work.
Manual grass mower gasoline: how a lawn mower works, a mower and a lawn mower, how to start a trimmer
Today, lawn mowers for grass take pride of place in the market for maintenance equipment and this is NOT surprising, since the optimal cost and high level of productivity cannot leave indifferent the majority of the population of different countries. At the moment, various manufacturers have presented a huge amount of equipment in this direction for everyone to see.
The lineup is huge and diverse. But it is worth noting that manual gasoline lawn mowers are in special demand. The reason for this is the low cost. But these tools also have a number of disadvantages, which we will actually talk about in this article.
over, the best models of hand mowers will be presented to your attention. And who knows, maybe you will find the best option for yourself. assistant to take care of your site. So, let’s get down to the topic.
Operating instructions for the hand lawn mower
First of all, it should be noted that the engine should in no case be turned on in a room that is closed, as this is fraught with disastrous consequences and poisoning, this is still the minimum that can happen. As for the work with the device itself, then it must be performed with high-quality lighting or during the day.
It is also important to remember that if you want your mower to last for many years, then don’t “drive it, since the most optimal speed of the device is equal to the normal speed of a person’s calm walking. over, it is important to note the fact that the mowing should be carried out exclusively in the opposite direction of the slope, that is, you cannot mow from top to bottom or vice versa, only across.
In order to fully protect yourself, you must pay due attention to the degree of the slope itself, since it should not exceed the indicator 15. Also, be extremely careful when directly changing the turn on the very slopes. It is important to be very careful when maneuvering the device while moving backwards, actually at the moment when you Pull the device in your direction.
You must also remember that the mower alone is sufficient vulnerable There are stones and debris of a solid nature, therefore, when you make its movement in areas where there is no grass, it must be turned off in order to minimize the possibility of damage to both its device and the knives themselves. This also applies to the moment when you move the unit to the place of work.
Also, the direct start of the starter and the engine itself must be carried out taking into account the manufacturer’s instructions. over, you must position your feet at an optimal and safe distance from the cutting guide device.
Do not tilt the mower while you are starting the engine itself. Even if there is a need for a slope, then it should have a minimum indicator. In addition, the lifting of the device should be carried out exclusively from the side opposite to you.
Click here and you will learn about all types and characteristics of forklift trucks.
Here //machinspec.com/lesozagotovitelnaya/benzopila/goodluck.html, you will learn how to distinguish an original Goodluck chainsaw from a fake, because it is much more pleasant to use a high-quality unit.
It is also important to remember that the engine itself cannot be started if you are in front of the direct ejector. Taking due care to keep your hands and feet away from the spinning knife. If it is in motion, then at this moment you must be located exclusively in front of the area of the hole intended for the release of cut grass.
It is also important that there are certain situations when it is necessary to stop the operation of the knife, the engine, and also remove the drive to the spark plug, namely:
- Before performing the elimination of the mechanical blockage itself, as well as when it is necessary to clean the instrument channel from grass;
- Before you are going to clean and check the device itself, or you, for example, need to adjust the shear height of the mower;
- In cases where the level of direct vibration of the device is increased. But you must remember that only a specialist can deal with this problem.
Stopping the engine is necessary when:
- You have completed the work, or you need to move the mechanism to another location;
- It is necessary to refuel the mower;
- You need to remove the container itself, intended for digestive collection.
Tips for choosing lawn mowers for.
In addition, if your assistant has a special rear ejection device, in which case it is impossible to work with it if the device does not have a reflector or a container.
The principle of operation of a gasoline mower
What actually makes it possible for each of us to purchase a device in this direction, which has sufficient power and at the same time the price for which is extremely low. However, there is a cheaper method for manufacturing the unit, for example, we suggest you assemble a mower from the rear axle with your own hands.
Before you start considering the issue, besides one model is different from another, you need to find out what this is actually intended for. a machine. It is important that each instrument has a definite and main difference from the second, namely, its direct activity. That is, each device is designed to perform a specific function and has its own personal features. For example, there are special lawn mowers for tall grass and weeds, in which we will tell here.
It is worth noting that this kind of tool is a kind of completely separate and different type of unit, which, in turn, has certain and qualitative features that take into account the very process of making hay.
It is also important that in order for the mower to solve the problem of squinting thick grass it is necessary to equip it with a special knife made of strong and durable material. Since, for example, regular knives in the process of the work itself are very quickly subjected to Stitching, therefore, they cannot perform a large amount of work. However, if this part was not supplied with your unit, then you can assemble a lawn mower knife with your own hands by following this link.
It is worth noting that the petrol-powered mower does not offer a high level of performance, as the cutting blade can cut extremely low and flat grass. In addition, it can fit absolutely any petrol mower, but still it is safer to purchase such a model that the manufacturer has equipped with special bicycle handles.
It is also worth paying attention to the fact that this device goes into direct sales, both as devices of an independent direction, and in the form of equipment of a hinged nature. In operation, electric lawn mowers do not require much work, since they are quite simple and convenient in operation.
In fact, the operation of the device itself is very similar to the principle of operation of the most ordinary scissors, which in this case simply have enormous dimensions. It is important that the stems that were cut, fit in the place where the tool passed.
It is also worth noting the main advantages that the mowers have, namely: they are able to cut not only soft, but also hard grass almost at the root; the hay is laid in a uniform and thin layer thanks to the action of Special rollers. And gasoline lawn mowers with mulching, which we will discuss in more detail here, are capable of not only mowing the lawn, but also preparing natural fertilizer.
For the features of manual mowers, see.
But you must remember that there are times when the mower simply fails, for the reason that on its way there are both large and solid debris, artisanal shoots, but also embankments that moles left behind. It is for this reason that, before starting the operation of the device itself, it is first of all necessary to thoroughly check the area on which the work will be carried out.
The best model. Lawn mower STIHL FS 55
Many people ask themselves the question of how to choose a gasoline manual lawn mower, so that they are practical, not expensive and productive? The answer is simple enough, all you need is to opt for the STIHL FS 55.
It belongs to light devices of this direction, which also has a high level of practicality and quality, in fact, it is NOT worth saying too much, since the Stihl trademark will speak for itself.
over, the device has features of the design direction, which play an important role in the process of mowing, which is done quite easily and naturally.
In addition, there is a fuel hand pump in its range. Even if the tool was, say, inactive for a long time, this does NOT interfere with the ease of its direct launch. Such lawn mowers, gasoline hand trimmers, the price of which ranges from 200 to 250, will undoubtedly become indispensable helpers for you.
- Engine power: 1.0 l. C or 750 W
- Fuel tank weight: 0.33 l
- Cylinder weight: 27.2 cu. Cm;
- Hose length: 1.47 m;
- Starting system: manual;
- Drive: petrol;
- Dimensions 4.9 kg.
You will learn more about other models of Stihl mowers in this article.
In this article, you learned how much a lawn mower costs, and also You were able to familiarize yourself with the aspects of its design and operation. It is worth noting that it does not matter which model of the device in this direction you choose for yourself, in any case, your lawn will be sparkle cleanliness and order, as this is the main task of the instrument.
In the manufacturer Stihl
The history of this German brand dates back to 1926. At the initial stages of its development, the company was engaged in the production and sale of various components for washing and steam machines. It all started, like many companies, with a small production and narrow focus, which made it possible to focus on the quality of products.
To date, the company has expanded its activities in more than 160 countries around the world, opening new centers and production offices in Switzerland, China and many other countries. This is understandable, because the range of the company is impressive: motor-drills, gasoline sprayers, mowers, gasoline trimmers, chainsaws and much more. I would like to note that Shtil chainsaws are very popular due to their functionality and reasonable price.
Recommendations for use
It is necessary to take temporary breaks from work. This is necessary so that the engine of the device does NOT overheat and does NOT fail ahead of time. For amateur models, there is a break every 20 minutes for the same time. For professional mowers, work should be interrupted every 50 minutes, in which case the downtime should be at least 10 minutes.
Petrol lawn mower FS 38
The model is distinguished, first of all, by its simplicity and compactness, which is quite enough for proper maintenance of the local area. The main control keys are located on the handle of the device, which greatly facilitates and speeds up the work.
- Engine power. 0.9 HP;
- Engine capacity. 27.2 cm3;
- Volume of the tank. 0.33 l;
- Engine’s type. Two-stroke;
- Barbell. Straight;
- Lever. D-shaped;
- Equipment. 2-notch grass trimmer blade, protective goggles, belt;
- Weight. 4.1 kg.
This model is one of the most popular on the market! You will learn about all the units that are included in the rating of the best lawn mowers here.
DIY Stihl trimmer repair and operating instructions FS-38 and 55 (Stihl FS), carburetor adjustment
It is inherent in man to ennoble the place in which he spends the lion’s share of his time. Residents of cities resort to the services of designers, or they themselves try to change something in their home, buy new furniture, wallpaper, so that when they come home after a hard day, they can mentally rest and relax in a favorable environment. Residents of their own homes located within the city have completely different concerns and requirements. It is necessary to mow shrubs, grass, various dead wood in a timely manner, carefully monitor the condition of the personal plot and garden. It is clear that this requires a slightly different means of achieving comfort. And here a new brainchild of engineering comes to the fore. Company mowers Stihl.
The model belongs to professional models, so the goals set for it will be slightly higher. It is designed for cutting rough grass, tough shrubs and young trees.
It provides the latest engine with high power, and not emitting a large amount of harmful emissions.
- Engine power. 1.9 HP;
- Engine capacity. 36.3 cm3;
- Volume of the tank. 0.53 l;
- Barbell. Straight;
- Lever. T-shaped;
- Equipment. Back strap, double bladed knife;
- Line diameter. 2.4 mm;
- Weight. 5.9 kg.
The range of for these models does not mean any difference in quality, first of all, each Stihl mower is designed for a certain type of work.
It is quite clear that there is no point in purchasing a more expensive and powerful model if you have a small plot or lawn in front of the house. Simpler models will do just fine with this task, but the word “simplicity” it is not used here in a derogatory manner. The more powerful mowers are designed to handle large areas with overgrown and dense surfaces, hence the price difference. If you are confused in such a variety of tools, do not be upset, but feel free to click here and we will tell you how to choose a lawn mower for a summer residence.
Model characteristics on.
However, whichever model you would NOT choose, you need to follow certain operating rules Recommended by the manufacturer in order to avoid possible damage.
Stihl FS 70 mower price
It is a more advanced model with more power and more multitasking. An anti-vibration system is provided to significantly reduce the impact of a running engine on the handle.
FS 70 features:
- Engine power. 1.2 HP;
- Engine capacity. 27.2 cm3;
- Volume of the tank. 0.34 l;
- Engine’s type. Two-stroke;
- Barbell. Straight;
- Lever. T-shaped;
- Equipment. Belt, line spool;
- Line diameter. 2.4 mm;
- Weight. 5.4 kg.