John deere x370 mower. John Deere X370 Lawn Tractor w/ 42-in Deck • CIMFLOK.COM

John Deere X370 Lawn Tractor w/ 42-in Deck

Engine is smooth-running and reliable V-twin air-cooled design

The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.

Key engine features include:

21.5 HP
Large 603-cc displacement
V-twin air-cooled design that provides smooth, quiet power
Quality features include:

Cast-iron cylinder liners
Overhead valves
Full-pressure lubrication

Replaceable oil filter
Dual-stage air cleaner

Excellent power and performance
Easy starts
Smooth operation

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

15-amp capacity
Regulated to keep the battery at full charge without risk of overcharging

Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.

Located on the left fender
Helps eliminate spillage

The 42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean and is versatile

The 42-in. (107-cm) Accel Deep Mower Deck provides the performance advantages of a two-spindle mower in a wide 42-in. (107-cm) size:

Resilient four-point mounting system suspends mower from tractor for a smooth and level cut
Wide mower wheels easily adjusted just above ground level to help prevent scalping
0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height
Onboard deck-leveling system makes keeping mower properly adjusted easy
Compatible with optional MulchControl™ mulching system
Compatible with efficient 7-bu (247-L) two-bag cut-and-throw material collection system
For use on X330, X350, X354, and X370 Tractors

The 42-in. (107-cm) Accel Deep mower deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.

Helps maintain excellent cut quality at faster mowing speeds

Productivity. gets the job done fast

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:

Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

Gives a smooth, even discharge of clippings at all mowing speeds
Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening

Cleanliness. for the mower and the operator

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

There are few places to catch and hold material on top and underneath the deck.

Top of deck stays cleaner, reducing time and effort needed for cleaning and service
Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
Less need to clean and remove buildup of material from underside deck

Limited amount of material to drift onto the operator and mower deck
Even flow of material discharged out the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
Mulching prevents the discharge of material completely and a MulchControl attachment makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

The flat-top design reduces places for material to build up and makes material that does collect easy to remove.

A wash port is provided to make cleaning the underside of the mower deck easy.

The 42A mower deck has strong spindle s, to keep the blades aligned, even after years of tough service:

Ribs in the deck shell add strength where it is needed.
The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) mower deck.

Mower wheels are double-captured:

Provides greater strength and durability for longer, trouble-free life.
Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

Rolled outer edge of the deck provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility. easy to change between side discharge, mulch, and bagging modes

The 42A Mower Deck is designed for excellent versatility:

The mower’s cut-and-throw design allows bagging with just the addition of the bagger chute, once the special bagging blades have been installed.

The 42A cut-and-throw chute is easy to install and securely held in place at the front and rear to provide a tight seal between the mower deck and the chute.

The rear latch is adjustable to allow for the optimum setting for easy use and a tight seal.

For ultimate side-discharge performance this baffle can be removed.

Must be removed for installation of the rear bagger chute, a 13-mm (0.51-in.) wrench is required (the bagger chute cannot be installed without removing this baffle)
Can remain removed for side discharging material
Must be re-installed for mulching

MulchControl lever action or electric one-touch options

A MulchControl attachment for the 42A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge the lawn material. Advantages of mulching grass clippings include:

A beautiful looking lawn
Grass clippings not blown onto the operator, driveways, or flower beds
Less fertilizer use
Elimination of the effort needed to dispose of clippings
The MulchControl attachment includes baffles to control the flow of material under the deck.

When the MulchControl baffle is open, most of the material passes through the discharge opening.
When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn clean-up is desired
42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute; see explanation in the Versatility section for more information

7-bu (247-L) rear bagger

An optional 7-bu (247-L) cut-and-throw rear bagger material collection system (MCS) is available for use with the 42-in. (107-cm) Accel Deep Mower. It provides an efficient means of collecting grass clippings and leaves.

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:

High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

Mulching blades are included with the MulchControl attachment. They can be used for mulching, side discharging, and bagging in most conditions.

Mower blade use chart


Side discharging mode only	M170639 side-discharge blade (shipped with mower)
Bagging mode only	GX25668 bagging blade (shipped with BG20754 rear bagger chute)
Mulching mode only	M170642 mulching blade (shipped with BM24794 lever-action and BUC10164 electric one-touch MulchControl)
Side discharge and mulching	M170642 mulching blade (shipped with BM24794 lever-action and BUC10164 electric one-touch MulchControl)
Side discharge and bagging	GX25668 bagging blade (shipped with BG20754 rear bagger chute)
Side discharge, mulching, and bagging	M170642 mulching blade (shipped with BM24794 lever-action and BUC10164 electric one-touch MulchControl)

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty is standard for all John Deere X300 Series Tractors.

The warranty is hassle free, with one company handling all of the paperwork.
Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

John Deere X370 Tractor Review Specs

John Deere X370 is a popular lawn and garden tractor even though it was only released by the John Deere brand in 2016 and is still in production.

From 2016 up until 2020, the tractor used a Kawasaki FS600V engine in what can be termed the first phase. However, from 2021 till date, John Deere made some changes to the tractor, called the second phase. It saw John Deere change the engine to a Kawasaki FR651V engine, among other changes. These engines carry 18.5 HP and 21.5 HP, respectively.

John Deere equipped this tractor with a twin touch system, a power steering, and a hydraulic lift. All of which goes toward a smooth operation and enjoyable experience.

There are so many reasons John Deere X370 has become a popular choice among lawn and garden owners in such a short time. In this article, we’ll see all this is to know about the X370, alongside the driving forces to its quick rise to prominence and acceptance in the industry.

John Deere X370 Specs

ModelJohn Deere X370

Features of John Deere X370 Tractor

The features are more detailed explanations of John Deere’s specifications to this tractor.

#1. General Dimensions

The John Deere X370 lawn and garden tractor was released in 2016 and is still in production. It sports a 72 inches long tractor. It also has a width of 38.5 inches, is 43 inches tall, and has a wheelbase of 49.4 inches which spreads its 223 kg weight across a considerable distance. The wheelbase distance ensures the weight is not concentrated on a small area, leaving tire marks in your field as you use the tractor. Generally, this is a moderate-sized tractor that will fit into an equally moderate-sized garden shed.

It sports an open cabin area that leaves the operator at the mercy of the elements and provides no protection in the event of an accidental turnover. However, it has some advantages, like the extra room and airflow.

#2. Engine

As earlier stated, John Deere used two engines for the X370 tractor. The first engine from 2016-2020 while the second engine from 2021 till date. Generally, the engines are easy to service because it has a one-piece hood that can open effortlessly and allow you to check and service the tractor.

Kawasaki FS600V

John Deere used the Kawasaki FS600V engine in the X370 from 2016-2020. This engine is a 2-cylinder, air-cooled vertical-shaft V-twin engine which produces a smooth operation and reduces engine noise. The engine is powered by gasoline and has an 18.5 horsepower rating. For a lawn and garden tractor, this rating is quite good.

Its displacement is 603 cc, while the bore/stroke is 2.87 × 2.84 inches. It uses an electric starter type to avoid issues with starting the engine, which is more common in the winter. In addition, it uses a dry air cleaner with foam pre-cleaner to keep the air entering the engine free from debris and dirt that can reduce its lifespan.

Kawasaki FR651V

After 2020, John Deere decided to change the engine of the X370 tractor to a Kawasaki FR651V engine. This new engine may share similarities with the FS600V, but it also has noticeable differences. One of such differences is its horsepower rating. There is a considerable increase in its HP rating at 21.5. And suppose the 18.5 HP on the previous engine was decent – this upgrade feels like a steal – as it will handle more garden activities like pulling heavy equipment and mowing a more extensive area.

It has a higher displacement at 726CC and a higher bore/stroke at 3.07 × 2.99 inches. The starter is also an electric system for easy use. And has a 2-cylinder, air-cooled vertical-shaft V-twin engine powered by gasoline.

#3. Transmission and Chassis

John Deere X370 lawn and garden tractor is a 4×2 2WD. The frame John Deere used here is a reliable heavy-duty welded steel to provide sufficient protection – in case it bumps against a surface. The transmission model is the Tuff-Torq K57 model, while it uses a belt-driven hydrostatic transmission type.

The tractor is fitted with power steering and makes turning the tractor super easy. You can make those incredible patterns on your landscape without breaking a sweat. Don’t forget to mix up the patterns, so your grass doesn’t suffer.

The controls are color-coded, so you can quickly identify and use them. Levers like the hydraulic-lift control and park brake latch are pivot levers you can use without stress. Cruise control is also available, and the button is on the dashboard. This way, you don’t need to stretch too far to enable this feature that keeps the tractor at a stable speed while you FOCUS on designing a beautiful lawn.

It has infinite forward and reverse gears while its oil capacity is 2.3 L. It uses the JD Low-Vis Hy-Gard oil. You’ll get up to 8.9 km/h forward speed and 6.4 km/h reverse speed when using the X370. Its internal wet disc brake ensures you can swiftly get the tractor to stop even in wet conditions.

#4. Attachments

In a typical tractor, attachments are vital if you want to do a lot with your tractor. With the X370, attachments carry the same value, which is why the tractor can hold a lot of attachments and accessories. However, we’ll only look at the significant attachments you can use with the X370. You can use two different mower deck types with the X370 – a blade and a snowblower.

#5. Mower Deck

You can use the unique Accel Deep™ 42″ mower deck to keep your grass low and appealing. It is mid-mounted. It comes with a dual-blade and manual lift. You can also use the Edge 42″ mower deck mid-mounted that comes with two-blade and manual lift.

#6. Blade

The blade used here is a 44″ blade that is front-mounted and comes with a manual lift.

#7. Snow Blower

John Deere X370 can be used with a 44″ snowblower to keep your driveways clear of snow. It is a dual-stage front-mount snowblower with a manual lift.

Pros and Cons of John Deere X370 Tractor

Price

Price is an essential part of every purchase, which is no different. A new X370 in 2016 was 3,999, while it cost 4,299 in 2022.

Summary

John Deere outdid itself with this lawn and garden tractor, and it is easy to see why the X370 has quickly become a household model. It does, however, come at a steep price, but with its warranty and features, it still presents a good bargain.

For Tractor Reviews You May Read:

Growing up in Brooklyn, New York City known for it’s green gardens. Jennifer, a 30 year old gardener and green living fanatic started Igra World to share her gardening journey and increase gardening awareness among masses. Follow Igra World to improve your gardening skills.

Join the discussion Cancel reply

Join Our Igra-World Community! Get instant access to our latest reviews, helpful tips and exclusive deals.

John Deere X370

21.5-HP (16.0-kW) V-twin engine

The tractor is powered by a John Deere iTorque power system, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.

Key engine features include:

21.5 HP (16.0 kW)
Large 44.3 cu in. (726-cc) displacement
V-twin air-cooled design that provides smooth, quiet power
Quality features include:

Cast-iron cylinder liners
Overhead valves
Full-pressure lubrication
Replaceable oil filter
Dual-stage air cleaner

Excellent power and performance
Easy starts
Smooth operation

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

Watch This Before You Buy a John Deere X350 Tractor!

12-amp charging capacity
Regulated to keep the battery at full charge without risk of overcharging

Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity

Fuel tank

Electronic fuel gauge

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.

Located on the left fender
Helps eliminate spillage

X350 with Accel Deep 42A Mower Deck

The 42-in. (107-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:

4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance

Optional lever-action or electric one-touch MulchControl™ system for superior mulching performance and versatility

Adjustable mower wheels, positioned just above ground level, help reduce scalping

Excellent cut quality

42A Mower Deck underside

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.

Helps maintain excellent cut quality at faster mowing speeds

Productivity. gets the job done fast

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:

Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

Gives a smooth, even discharge of clippings at all mowing speeds
Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening

Cleanliness. for the mower and the operator

Accel Deep 42A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

There are few places to catch and hold material on top and underneath the deck.

Top of deck stays cleaner, reducing time and effort needed for cleaning and service
Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
Less need to clean and remove buildup of material from underside deck

Limited amount of material to drift onto the operator and mower deck
Even flow of material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

The flat-top design reduces places for material to build up and makes material that does collect easy to remove.

Mower wash port

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

Superior durability is designed in

Hinged spindle cover on the 42A

Mower Deck Mower deck wheels are double captured for durability

The 42A Mower Deck has strong spindle s to keep the blades aligned, even after years of tough service:

Ribs in the deck shell add strength where it is needed.
The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) Mower Deck.

Mower wheels are double captured:

Provides greater strength and durability for longer, trouble-free life.
Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

Rolled outer edge of the deck provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility. easy to change between side discharge, mulch, and bagging modes

Rear MulchControl baffle (A) that must be removed for bagging

Rear MulchControl baffle removed to allow for chute installation

The 42A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
The cut-and-throw rear bagger can be used with MulchControl by removing the rear MulchControl baffle (A) before installing the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

7-bu (247-L) rear bagger

X350 with optional rear bagger

Two-piece chute (ordered separately)

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:

7-bu (247-L) capacity
Easy-to-attach two-peice chute (ordered separately)
Air exhaust duct
Convenient spring-latch
Airflow fill indicator
Quik-Tatch mounting
Sealed hopper top
Loose-knit bags available

Mower blades

Mower blades shipped with the rear bagger chute

High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging in most conditions.

Mower blade use chart

Mode(s) of operation	Mower blade
Side discharging mode only	Side-discharge blade (shipped with mower)
Bagging mode only	Bagging blade (shipped with rear bagger chute)
Mulching mode only	Mulching blade (shipped with MulchControl)
Side discharge and mulching	Mulching blade (shipped with MulchControl)
Side discharge and bagging	Bagging blade (shipped with rear bagger chute)
Side discharge, mulching, and bagging	Mulching blade (shipped with MulchControl)

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty is standard for all John Deere X300 Series Tractors.

The warranty is hassle free, with one company handling all the paperwork.
Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

Power steering cylinder

Tilt steering lever (X390 and X394 only)

Hydraulic power steering is standard equipment:

Provides effortless, automotive-like control
Reduces operator fatigue and increases productivity
Enables a tight turning radius for great maneuverability
Adjustable-tilt steering wheel for optimum operator comfort (X390 and X394 Tractor)

Hydraulic lift system is easy to operate

Hydraulic lift

The hydraulic lift control lever is positioned on the dash near the steering wheel for quick, easy, and precise fingertip control of equipment. Implement float, which allows an implement to follow the ground contour, is built into the lift linkage.

Lever-action MulchControl lever (shown on 48A mower deck)

Electric one-touch MulchControl switch

The optional MulchControl system makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

Creates a beautiful looking lawn
Smaller grass clippings disappear into the lawn canopy
Reduces fertilizer needs
Grass clippings are not blown onto the operator, driveways, or flower beds
No need to dispose of bags of clippings

How MulchControl works

MulchControl baffle open (shown on Z300 48A mower deck)

MulchControl baffle closed (shown on Z300 48A mower deck)

MulchControl is an innovative, simple design that is easy to use and maintain:

The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
The MulchControl handle, or an electric one-touch actuator, is on top of the mower deck and is used to open and close the MulchControl baffle.
When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl is well-suited to the following mowing situations:

For operators who usually mulch, but side discharge when grass gets too long
For operators who usually side discharge, but would like to close the chute to control clippings in some areas
For operators who always mulch a main lawn, but often side discharge secondary lawns
For operators who collect clippings but want to go farther before emptying the material collection system

MulchControl puts the operator in control of the clippings.

Electric one-touch MulchControl

Electric one-touch MulchControl systems shift the MulchControl baffle using an electric actuator that is operated by a dash-mounted switch.

Electric one-touch MulchControl switch

Electric one-touch MulchControl actuator (shown on 54A mower deck)

Operators can convert between modes without interrupting the mowing process, making it possible to change between modes:

When approaching driveways or flower beds where clippings would be undesirable
When a breeze blows clippings back onto the operator
For side discharge mowing only the areas of the property where grass is too thick for mulching
With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching

MulchControl limitations

While in the side discharge mode, MulchControl still mulches about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn cleanup is desired
42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

When bagging with MulchControl on a 48A or 54A mower deck, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower runs without material when the baffle is closed.

Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks

When bagging with MulchControl on a 42A mower deck, the cut-and-throw rear bagger can be used with the MulchControl blades. However, the rear MulchControl baffle (A) needs to be removed to install the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

MulchControl compatibility

Each MulchControl system is an optional field-installed attachment and includes everything needed: baffles, mulch blades, a handle (lever action attachments) or an actuator, wiring, and switches (electric one-touch attachments).

Lever-action MulchControl attachments

Attachment	Description	Applications
BUC10704	42-in. (107-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 Series Tractors, Z300 Series ZTrak™ Mowers
BUC10705	48-in. (122-cm) Accel Deep MulchControl (lever action)	S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
BUC10706	54-in. (137-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers

Electric one-touch MulchControl attachments

Attachment	Description	Applications
BUC11632	42-in. (107-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 Series Tractors
BUC11633	48-in. (122-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors
BUC11634	54-in. (137-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors

NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

44-in. (112-cm) Front Blade

Snow blower, weather enclosure, and chains on an X300 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

44-in. (112-cm) Snow Blower
44-in. (112-cm) Front Blade
48-in. (122-cm) Front Blade (X394 Tractor only)
Tire chains or TerraGrip traction belts
Weather enclosure (available for all X300 Series, except the X350R)
Weights

Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)

Kanzaki K58 transaxle (X380, X384, X390, X394)

The Tuff Torq® hydrostatic transaxle encloses the hydrostatic pump and motor rotator groups in the same housing with the differential and axle housings. This design is very efficient and reduces the number of sealing surfaces to minimize the potential for leakage.

Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:

Use of the latest valve designs has significantly reduced the sound level.
Large pump and motor rotating groups ensure long life and efficient operation.

Freewheeling valve

A freewheeling valve control is conveniently located near the tractor rear hitch plate for good visibility and easy operation.

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Convenient operator station

Separate throttle and choke controls

The contoured dash has clean, attractive styling and ergonomic controls for easy use:

Controls are color coded for easy identification by the operator.
Controls are logically placed and easy to reach.
The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
The reverse implement option (RIO) switch is a yellow button.
The hydraulic-lift control and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.

The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.

Functional design of the throttle and choke controls provides good appearance and a comfortable feel.

Easy-to-use key switch and controls

Tilt steering lever (X390 and X394 only)

The hydraulic-lift control and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.

The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.

Display panel

Display panel illustration with descriptions

Display panel

Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

Display features dark-cockpit design to minimize operator distractions.
Display is back lit for night visibility.

Night visibility is especially useful with snow blower use.

Target-zone graphics inform the operator of the engine speed range to use for best cut quality.

Damage can be prevented and repair costs can be reduced by addressing problems early.

The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.

Onboard diagnostics provides trouble codes for use by trained technicians.

For example, a technician can test switch functionality and circuit continuity without tools.

Twin Touch™ foot control

Twin Touch foot control

Cruise control

Twin Touch foot pedals control the speed and direction of travel:

Automotive-type accelerator control ensures easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Cruise control

Cruise control is standard equipment:

To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.

Mower deck height adjustment

Mower cut-height adjusting knob

A rotary dial knob makes adjusting the mower cut height quick and easy:

Provides mower cut heights in 0.25-in. (6.4-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
Returns the mower deck to the same preset height each time it is lowered

Storage tray under tractor seat

Exact Adjust tool used to level mower deck

Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat.

Exact Adjust ports allow for easy and accurate leveling of the mower deck for optimum mowing performance.

Deck-leveling gauge placed under deck

Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.

Parking brake control

Parking brake

Depressing the brake pedal applies internal wet-disk brakes (increased durability and longer life) for safe stopping.

A parking brake control is conveniently located for easy access; it holds the brake pedal securely in locked position.

Electric PTO clutch is easy and convenient to use

Electric PTO switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Heavy-duty PTO clutch

PTO clutch

The PTO clutch is designed to operate through many on/off cycles.

Reverse implement switch

Mower engagement PTO switch

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

Stop forward travel. Allow attachment to run.
Look down and behind the machine to be sure that there are no bystanders.
Push and hold in the reverse implement switch while depressing the reverse pedal slightly.NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
Resume forward travel. The attachment should continue operating.
Repeat procedure to position the machine again.

Welded, heavy-duty frame

The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.

Weight bracket is built into the frame of two-wheel-steer models.
Four-wheel-steer models require the optional weight bracket.

Front axle and wheel spindles are heavy-duty

Cast-iron front axle and steering spindles

Front axle is made of nodular cast iron:

Cast-iron front axle is strong and shock resistant.
Cast iron will not yield under heavy loads or impact.

A replaceable bushing is used at axle mounting:

The bushing provides excellent wear resistance.
Grease fittings at each spindle are easy to service.

Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

Have strength to handle heavy implements
Provide long life at bearing surfaces
Use sealed precision bearings in front wheels

Rear equipment-mounting system is heavy-duty and easy to use

Rear equipment mounting system

A heavy-duty equipment mounting system is used:

Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment
Easily attach optional equipment to the tractor
Can bear the load of heavy rear-mounted equipment, such as material collection systems

Attractive styling

Hood air-intake louvers

Smooth, rounded contours present a modern, styled appearance:

Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.

Cooler engine operation
Lower operator station sound levels

Reduces sound
Will not rust or dent

Two high-quality headlights give excellent visibility

Headlights are standard equipment on all models:

Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
A headlight position on the ignition switch makes it easy to operate the headlights.
The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

Operator station

The operator station is designed for operator comfort and ease of using controls:

A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
Full-length foot mats provide comfort for the operator and protect the footrest area.

Comfortable seat

Comfortable cut-and-sewn seat

Comfortable cut-and-sewn seat with optional armrests

An 18-in. (46-cm), high-back cut-and-sewn seat delivers a comfortable, smooth ride and excellent support for the operator:

A smoother, more comfortable ride results from the use of more foam than in a form-in-place seat and more side-bolstering to stabilize the operator on uneven terrain.
Improved visual appeal is provided by the thicker cushion, additional bolstering in the seat and back, and an embroidered John Deere logo that makes this upscale seat look as good as it feels.
Long-term pliability and less chance of cracking are advantages of the cut-and-sewn process, which does not require heating during the manufacturing process and gives a more uniform vinyl thickness.
Additional operator support and comfort is available with optional BM23761 armrests.
Reduced cost of repair, should the seat cover be damaged, is available with a replaceable seat cover available from Parts.
Seat travel of 6.6 in. (17 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls. Seat can be easily adjusted fore and aft by the operator while sitting on the seat.

Adjustable seat suspension

Seat suspension with springs in rear position

Seat suspension with springs in forward position

The seat suspension is adjustable, without tools, for the weight of the operator:

Springs are adjustable fore and aft to any of three positions.

No tools required
Allows fine-tuning of the suspension for the operator’s weight
Back position for more support for heavier operators

Can be used to store gloves, small tools, etc.
Provides storage location for Exact Adjust tool and deck-leveling gauge

Cup holder and toolbox

Cup holder and covered toolbox on fender

Covered toolbox with open cover

A cup holder and toolbox are located on the fender for operator convenience:

The cup holder holds a variety of container sizes.
Toolbox provides convenient storage.

Toolbox cover snaps closed to provide protection for loose tools, cell phones, etc.

Removable plug for optional 12-V outlet

Location for optional 12-V outlet

A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

Convenient for plugging in cell phone charger and other electric devices

Can be used to operate electric rear equipment, such as a sprayer or spreader

12-V fast connector

Fast connector location

A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:

The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

One-piece hood is easy to open

Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

Important service points are located within easy reach.
A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.

Easy-to-service engine fuel and oil filters

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

Quick response (QR) codes link to owner information web pages

Example product identification number (PIN) label with QR code

John Deere riding lawn mowers are supported by owner information web pages that include links to:

Safety and how-to videos
Operator’s manuals
Parts catalog
Maintenance reminder sheets
Attachments
Warranty statements

To speed access to owner information web pages, a QR code is printed onto a PIN label located under the hood on trim side of the steering pedestal. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.

Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy

Deck-leveling gauge and hex adjusting tool stored under tractor seat

Exact Adjust access holes

A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.

Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.

The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

There is no need to reach under the fender deck while making the mower-level adjustment.
Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.

Level the mower deck side to side
Set the correct amount of rake (front-to-back deck orientation)
Calibrate the cutting height to the cut-height adjusting knob setting

To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.

Deck-leveling tool placed under deck

Using included ball-hex tool to level mower deck

Consult the operator’s manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

Park the tractor on a level surface.
Inflate tires to the correct pressure.
Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.

Cut height adjusting knob

Set mower cutting-height knob to the correct deck-leveling position.
Adjust mower wheels as necessary so they do not contact the ground surface.
Remove the onboard deck-leveling gauge that is located under the seat.
Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points varies slightly between decks.

Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.

Loosen rear nuts equally on each side of front lift rod.
Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
Tighten rear nuts after adjustment is complete.

NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

MowerPlus home screen

MowerPlus maintenance screen

Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

Engine hours, fuel level, and battery health (as compatible)
Mowing history with time, distance, area, and speed
Current day and five-day weather forecast based on location
Walk-through setup guides
Expert mowing tips
Useful attachments for future purchase
Periodic maintenance reminders
Safety instructions

To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

Additional details

MowerPlus connectors (sold separately)

MowerPlus Hour Meter Connector

MowerPlus Deluxe Smart Connector, with a phone

Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

BUC10510 MowerPlus Hour Meter Connector is for use with:

Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
Model year 2015 to 2020 S240 Tractors (serial number.880,000)
S100, S110, S140, and S220 Tractors

BUC10929 MowerPlus Deluxe Smart Connector is for use with:

All S120, S130, S160, S170, and S180 Tractors
Model year 2021 and newer S240 Tractors (serial number 880,001-)
Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

BUC10537 MowerPlus Smart Connector is for use with:

All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.

MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.

Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Specs Compare

.9% APR fixed rate for 48 months 1

on New John Deere X300 Select Series Lawn Tractors

1.9% APR fixed rate for 48 months 1 OR
4.9% APR fixed rate for 60 months 2 OR
No Interest if Paid in Full within 9 Months 3
Offers available 02 May 2023 through 31 July 2023

1 Offer valid on qualifying purchases made 02 May 2023 through 31 July 2023. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 1.9% APR is for 48 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 23.0% APR (as of 01 May 2023). Available at participating U.S. dealers. and models may vary by dealer. Offer available on new equipment and in the U.S. only. and savings in U.S. dollars.

2 Offer valid on qualifying purchases made 02 May 2023 through 31 July 2023. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 4.9% APR is for 60 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 23.0% APR (as of 01 May 2023). Available at participating U.S. dealers. and models may vary by dealer. Offer available on new equipment and in the U.S. only. and savings in U.S. dollars.

3 Offer valid on qualifying purchases made 02 May 2023 through 31 July 2023. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. Interest will be charged to your account from the purchase date at 17.90% APR if the purchase balance is not paid in full within 9 months or if your account is otherwise in default. Available at participating U.S. dealers. and models may vary by dealer. Offer available on new equipment and in the U.S. only. and savings in U.S. dollars.

Reviews

I am real happy with it. Meets all my expectations.

the power steering is great especially with the 44 inch blower and the hydraulic lift lower control.with 1 finger.the bagger system lift the grass really well. the only complaint I have is there is still no soft cab for this tractor yet; they said spring of 2022 ;well it summmer and still cant find one available I can get one from 2017 like new they say it will not fit I will make it fit somebuddy dropped the ball on this when they rolled the fenders

I returned my X354 on JD’s 30-day promise due to the tremendous effort to steer, and ordered this X370 instead. I am extremely happy! To anyone who has never driven a mower with power steering, I highly suggest you try it. I could never get my wife to mow due to steering effort, but she got on this mower and continued to mow the entire lawn. The 21.5 HP engine is extremely powerful with this 42-in deck. Engine starts and runs very smooth. It does use gas, but I am happy to trade that for the nice power it possesses. It also comes with the slightly upgraded K57 transmission vs the smaller K46. It’s like.3 MPH faster too, which is not a lot, but I did notice it. Transmission never whined once even on my decent hills. As for cons, I really wish JD would equip these with rear scalp wheels. They are a must have on my property, and I fabricated and installed my own. Even though the deck is only 42-inches, when you hit a dip or slope straight on, whether up or down, the deck will scalp without the rear scalp wheels. It’s understandable they aren’t on the X354 because of rear wheel clearance, but there is no excuse to not install them on any X series 2-wheel drive mower. As for the seat; it’s awesome too. Very comfy and has 3 spring settings in addition to being able to be adjusted forward or backward. After leveling the deck myself due to it being way off on delivery, it cut very clean and smooth. This mower does not come cheap, but it was worth every penny in my opinion. Probably the smoothest mower I’ve ever driven in my nearly 50 years.

I have used it 2 winters.had in for repair 3 times.-worn belt 2 times 1 time for pick up line in the gas tank. stored inside a garage in winter very hard to start. I will say it does good blowing snow once you get it running. I waited many yrs. to buy a JD now I’m not sure about my decision!

Bought the x370 last year.Not good in the winter if you purchase a snow blower attachment.Takes at least 15 min to start in a garage and does the manufacturer tighten the oil filter with a torque wrench because it should be slightly over hand tight!

Got this late in summer. Hard to have a real review at only 2 hours on it. Wife loves it. Handles nice easy to operate. Smooth running cuts well. Since my last mower one thing I like better in the Husqvarna is all u have to do is turn key back 1 notch abs can reverse anytime, with this jd u have to hold button each time- that Ishtar convenient! Jd spins on hills more then husq. This unit has a great turning radius.

I decided to replace my old D130, after cutting my daughters lawn with her 2020 X370. I ordered mine in May of 2021 and when I did I also bought the bagging system. My tractor arrived first week of June, but had to wait for the bagging system a bought a month. It is a pleasure to cut my lawn with this tractor and plan on buying the snow blower attachment. The only thing I have found is the reverse is a bit touchy, timing with my reverse switch will sometimes cut off the PTO, maybe this is still me getting use to the tractor.

MessyMelLocation: London Twp, MichiganLength of Ownership: 1yearOrLongerUsage: Weekly

Its been over a year since my X370 riding lawn tractor. Super happy with it. Comfortable to ride, easy controls. My first Deere purchase. Can’t wait to check out the attachments I can get for it. Having my X370 helps maintain my 15acres. importantly, at my age, I let the tractor do all the hard work and heavy carrying.

I bought Lawn Tractor in September does great job and cut mowing time in half Wife loves the power steering

Unhappy deere ownerLocation: Central WisconsinLength of Ownership: 1yearOrLongerUsage: Weekly

Mower cuts grass great. If you can get it started it blows snow great. The drive could have a lock in feature. I have sent it back to the dealer 3 times in a year. Will not start in below 25 degrees. Not happy with the deere.

X370 Lawn Tractor with 42-inch Deck

21.5-HP (16.0-kW) V-twin engine

21.5 HP (16.0 kW)
Large 44.3 cu in. (726-cc) displacement
V-twin air-cooled design that provides smooth, quiet power
Quality features include:

Cast-iron cylinder liners
Overhead valves
Full-pressure lubrication
Replaceable oil filter
Dual-stage air cleaner

Excellent power and performance
Easy starts
Smooth operation

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

12-amp charging capacity
Regulated to keep the battery at full charge without risk of overcharging

Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity

Fuel tank

Electronic fuel gauge

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.

Located on the left fender
Helps eliminate spillage

X350 with Accel Deep 42A Mower Deck

4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance

Optional lever-action or electric one-touch MulchControl™ system for superior mulching performance and versatility

Adjustable mower wheels, positioned just above ground level, help reduce scalping

Excellent cut quality

42A Mower Deck underside (shown with optional MulchControl)

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.

Helps maintain excellent cut quality at faster mowing speeds

Productivity. gets the job done fast

Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

Gives a smooth, even discharge of clippings at all mowing speeds
Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening

Cleanliness. for the mower and the operator

Accel Deep 42A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

There are few places to catch and hold material on top and underneath the deck.

Top of deck stays cleaner, reducing time and effort needed for cleaning and service
Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
Less need to clean and remove buildup of material from underside deck

Limited amount of material to drift onto the operator and mower deck
Even flow of material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

The flat-top design reduces places for material to build up and makes material that does collect easy to remove.

Mower wash port

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

Superior durability is designed in

Hinged spindle cover on the 42A

Mower Deck Mower deck wheels are double captured for durability

The 42A Mower Deck has strong spindle s to keep the blades aligned, even after years of tough service:

Ribs in the deck shell add strength where it is needed.
The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) Mower Deck.

Mower wheels are double captured:

Provides greater strength and durability for longer, trouble-free life.
Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

Rolled outer edge of the deck provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility. easy to change between side discharge, mulch, and bagging modes

Rear MulchControl baffle (A) that must be removed for bagging

Rear MulchControl baffle removed to allow for chute installation

The 42A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
The cut-and-throw rear bagger can be used with MulchControl by removing the rear MulchControl baffle (A) before installing the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

7-bu (247-L) rear bagger

X350 with optional rear bagger

Two-piece chute (ordered separately)

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:

7-bu (247-L) capacity
Easy-to-attach two-piece chute (ordered separately)
Air exhaust duct
Convenient spring-latch
Airflow fill indicator
Quik-Tatch mounting
Sealed hopper top
Loose-knit bags available

Mower blades

Mower blades shipped with the rear bagger chute

High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging in most conditions.

Mower blade use chart

Mode(s) of operation	Mower blade
Side discharging mode only	Side-discharge blade (shipped with mower)
Bagging mode only	Bagging blade (shipped with rear bagger chute)
Mulching mode only	Mulching blade (shipped with MulchControl)
Side discharge and mulching	Mulching blade (shipped with MulchControl)
Side discharge and bagging	Bagging blade (shipped with rear bagger chute)
Side discharge, mulching, and bagging	Mulching blade (shipped with MulchControl)

The warranty is hassle free, with one company handling all the paperwork.
Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

Power steering cylinder

Tilt steering lever (X390 and X394 only)

Provides effortless, automotive-like control
Reduces operator fatigue and increases productivity
Enables a tight turning radius for great maneuverability
Adjustable-tilt steering wheel for optimum operator comfort (X390 and X394 Tractor)

Hydraulic lift system is easy to operate

Hydraulic lift

Lever-action MulchControl lever (shown on 48A mower deck)

Electric one-touch MulchControl switch

Creates a beautiful looking lawn
Smaller grass clippings disappear into the lawn canopy
Reduces fertilizer needs
Grass clippings are not blown onto the operator, driveways, or flower beds
No need to dispose of bags of clippings

How MulchControl works

MulchControl baffle open (shown on Z300 48A mower deck)

MulchControl baffle closed (shown on Z300 48A mower deck)

MulchControl is an innovative, simple design that is easy to use and maintain:

The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
The MulchControl handle, or an electric one-touch actuator, is on top of the mower deck and is used to open and close the MulchControl baffle.
When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl is well-suited to the following mowing situations:

For operators who usually mulch, but side discharge when grass gets too long
For operators who usually side discharge, but would like to close the chute to control clippings in some areas
For operators who always mulch a main lawn, but often side discharge secondary lawns
For operators who collect clippings but want to go farther before emptying the material collection system

MulchControl puts the operator in control of the clippings.

Electric one-touch MulchControl

Electric one-touch MulchControl systems shift the MulchControl baffle using an electric actuator that is operated by a dash-mounted switch.

Electric one-touch MulchControl switcht

Electric one-touch MulchControl actuator (shown on 54A mower deck)

Operators can convert between modes without interrupting the mowing process, making it possible to change between modes:

When approaching driveways or flower beds where clippings would be undesirable
When a breeze blows clippings back onto the operator
For side discharge mowing only the areas of the property where grass is too thick for mulching
With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching

MulchControl limitations

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn cleanup is desired
42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

Electric one-touch MulchControl attachments

Attachment	Description	Applications
BUC11632	42-in. (107-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 Series Tractors
BUC11633	48-in. (122-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors
BUC11634	54-in. (137-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors

Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks

MulchControl compatibility

Lever-action MulchControl attachments

Attachment	Description	Applications
BUC10704	42-in. (107-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 Series Tractors, Z300 Series ZTrak™ Mowers
BUC10705	48-in. (122-cm) Accel Deep MulchControl (lever action)	S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
BUC10706	54-in. (137-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers

44-in. (112-cm) Front Blade, electric lift, angling and tire chains on an X350 Tractor

44-in. (112-cm) Snow Blower, weather enclosure and tire chains on an X350 Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

44-in. (112-cm) Snow Blower
44-in. (112-cm) Front Blade
48-in. (122-cm) Front Blade (X394 Tractor only)
Tire chains or TerraGrip traction belts
Weather enclosure (available for all X300 Series, except the X350R)
Weights

Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)

Kanzaki K58 transaxle (X380, X384, X390, X394)

Use of the latest valve designs has significantly reduced the sound level.
Large pump and motor rotating groups ensure long life and efficient operation.

Freewheeling valve

When it’s inconvenient to start the tractor, a freewheeling valve releases the transmission so the tractor can be pushed a short distance. The freewheeling valve control is conveniently located on the tractor’s rear hitch plate.

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Convenient operator station

Separate throttle and choke controls

Controls are color coded for easy identification by the operator.
Controls are logically placed and easy to reach.
The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
The reverse implement option (RIO) switch is a yellow button.
The hydraulic-lift control and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.

The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.

Functional design of the throttle and choke controls provides good appearance and a comfortable feel.

Easy-to-use key switch and controls

Tilt steering lever (X390 and X394 only)

The hydraulic-lift control and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.

The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.

Display panel

Display panel illustration with descriptions

Display panel

Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

Display features dark-cockpit design to minimize operator distractions.
Display is back lit for night visibility.

Night visibility is especially useful with snow blower use.

Target-zone graphics inform the operator of the engine speed range to use for best cut quality.

Damage can be prevented and repair costs can be reduced by addressing problems early.

The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.

Onboard diagnostics provides trouble codes for use by trained technicians.

For example, a technician can test switch functionality and circuit continuity without tools.

Twin Touch™ foot control

Twin Touch foot control

Cruise control

Twin Touch foot pedals control the speed and direction of travel:

Automotive-type accelerator control ensures easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Deck-leveling gauge placed under deck

Cruise control

Cruise control is standard equipment:

To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.

Mower deck height adjustment

Mower cut-height adjusting knob

A rotary dial knob makes adjusting the mower cut height quick and easy:

Provides mower cut heights in 0.25-in. (6.4-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
Returns the mower deck to the same preset height each time it is lowered

Storage tray under tractor seat

Exact Adjust tool used to level mower deck

Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat.

Exact Adjust ports allow for easy and accurate leveling of the mower deck for optimum mowing performance.

Parking brake control

Parking brake

Depressing the brake pedal applies internal wet-disk brakes (increased durability and longer life) for safe stopping.

A parking brake control is conveniently located for easy access; it holds the brake pedal securely in locked position.

Electric PTO clutch is easy and convenient to use

Electric PTO switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Heavy-duty PTO clutch

PTO clutch

The PTO clutch is designed to operate through many on/off cycles.

Reverse implement switch

Mower engagement PTO switch

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

Stop forward travel. Allow attachment to run.
Look down and behind the machine to be sure that there are no bystanders.
Push and hold in the reverse implement switch while depressing the reverse pedal slightly.NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
Resume forward travel. The attachment should continue operating.
Repeat procedure to position the machine again.

Welded, heavy-duty frame

The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.

Optional Quik-Tatch weights

Two 42-lb (19-kg) Quik-Tatch weights on rear hitch plate

Two 42-lb (19-kg) Quik-Tatch weights on an optional front weight bracket/bumper

Optional Quik-Tatch weights can be added to increase traction and ballast equipment.

The rear hitch plate holds up to two 42-lb (19-kg) Quik-Tatch weights.

An optional rear weight is required on X354, X384, and X394 Tractors.

Front axle and wheel spindles are heavy-duty

Cast-iron front axle and steering spindles

Front axle is made of nodular cast iron:

Cast-iron front axle is strong and shock resistant.
Cast iron will not yield under heavy loads or impact.

A replaceable bushing is used at axle mounting:

The bushing provides excellent wear resistance.
Grease fittings at each spindle are easy to service.

Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

Have strength to handle heavy implements
Provide long life at bearing surfaces
Use sealed precision bearings in front wheels

Rear equipment-mounting system is heavy-duty and easy to use

Rear equipment mounting system

A heavy-duty equipment mounting system is used:

Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment
Easily attach optional equipment to the tractor
Can bear the load of heavy rear-mounted equipment, such as material collection systems

Attractive styling

Hood air-intake louvers

Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.

Cooler engine operation
Lower operator station sound levels

Reduces sound
Will not rust or dent

Two high-quality headlights give excellent visibility

Headlights are standard equipment on all models:

Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
A headlight position on the ignition switch makes it easy to operate the headlights.
The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

Operator station

A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
Full-length foot mats provide comfort for the operator and protect the footrest area.

Comfortable seat

Comfortable cut-and-sewn seat

Comfortable cut-and-sewn seat with optional armrests

An 18-in. (46-cm), high-back cut-and-sewn seat delivers a comfortable, smooth ride and excellent support for the operator:

A smoother, more comfortable ride results from the use of more foam than in a form-in-place seat and more side-bolstering to stabilize the operator on uneven terrain.
Improved visual appeal is provided by the thicker cushion, additional bolstering in the seat and back, and an embroidered John Deere logo that makes this upscale seat look as good as it feels.
Long-term pliability and less chance of cracking are advantages of the cut-and-sewn process, which does not require heating during the manufacturing process and gives a more uniform vinyl thickness.
Additional operator support and comfort is available with optional BM23761 armrests.
Reduced cost of repair, should the seat cover be damaged, is available with a replaceable seat cover available from Parts.
Seat travel of 6.6 in. (17 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls. Seat can be easily adjusted fore and aft by the operator while sitting on the seat.

Adjustable seat suspension

Seat suspension with springs in rear position

Seat suspension with springs in forward position

The seat suspension is adjustable, without tools, for the weight of the operator:

Springs are adjustable fore and aft to any of three positions.

No tools required
Allows fine-tuning of the suspension for the operator’s weight
Back position for more support for heavier operators

Can be used to store gloves, small tools, etc.
Provides storage location for Exact Adjust tool and deck-leveling gauge

Cup holder and toolbox

Cup holder and covered toolbox on fender

Covered toolbox with open cover

A cup holder and toolbox are located on the fender for operator convenience:

The cup holder holds a variety of container sizes.
Toolbox provides convenient storage.

Toolbox cover snaps closed to provide protection for loose tools, cell phones, etc.

Removable plug for optional 12-V outlet

Location for optional 12-V outlet

A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

Convenient for plugging in cell phone charger and other electric devices

Can be used to operate electric rear equipment, such as a sprayer or spreader

12-V fast connector

Fast connector location

The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

One-piece hood is easy to open

Service interval decal located under hood

Important service points are located within easy reach.
A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.

Easy-to-service engine fuel and oil filters

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

Quick response (QR) codes link to owner information web pages

Example product identification number (PIN) label with QR code

John Deere riding lawn mowers are supported by owner information web pages that include links to:

Safety and how-to videos
Operator’s manuals
Parts catalog
Maintenance reminder sheets
Attachments
Warranty statements

Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy

Deck-leveling gauge and hex adjusting tool stored under tractor seat

Exact Adjust access holes

The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

There is no need to reach under the fender deck while making the mower-level adjustment.
Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.

Level the mower deck side to side
Set the correct amount of rake (front-to-back deck orientation)
Calibrate the cutting height to the cut-height adjusting knob setting

To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.

Deck-leveling tool placed under deck

Using included ball-hex tool to level mower deck

Consult the operator’s manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

Park the tractor on a level surface.
Inflate tires to the correct pressure.
Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.

Cut height adjusting knob

Set mower cutting-height knob to the correct deck-leveling position.
Adjust mower wheels as necessary so they do not contact the ground surface.
Remove the onboard deck-leveling gauge that is located under the seat.
Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points varies slightly between decks.

Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.

Loosen rear nuts equally on each side of front lift rod.
Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
Tighten rear nuts after adjustment is complete.

NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

MowerPlus home screen

MowerPlus maintenance screen

Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

Engine hours, fuel level, and battery health (as compatible)
Mowing history with time, distance, area, and speed
Current day and five-day weather forecast based on location
Walk-through setup guides
Expert mowing tips
Useful attachments for future purchase
Periodic maintenance reminders
Safety instructions

To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

Additional details

Should You Buy a John Deere S100 Series or X300 Series Riding Mower?

MowerPlus connectors (sold separately)

MowerPlus Hour Meter Connector

MowerPlus Deluxe Smart Connector, with a phone

Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

BUC10510 MowerPlus Hour Meter Connector is for use with:

Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
Model year 2015 to 2020 S240 Tractors (serial number.880,000)
S100, S110, S140, and S220 Tractors

BUC10929 MowerPlus Deluxe Smart Connector is for use with:

All S120, S130, S160, S170, and S180 Tractors
Model year 2021 and newer S240 Tractors (serial number 880,001-)
Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

BUC10537 MowerPlus Smart Connector is for use with:

Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Engine power21.5 hp16.0 kW Oil changeNo-tools oil drain with replaceable filter Engine manufacturer/modelFR651V Transaxle typeK57 hydrostatic integrated with transaxle Transaxle controlTwin Touch™ pedals Rear tires20x10-8 Lift system typeHydraulic Cutting widthAccel Deep™ mower deck, 42 in.107 cm U.S. warranty4 year/300 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

Power21.5 hp16.0 kW Displacement44.3 cu in.726 cc Manufacturer/modelFR651V TypeOverhead valve, full-pressure lube, oil filter CylindersV-twin, cast-iron liners GovernorMechanical Choke/speed controlSeparate levers, automatic choke return Cooling methodAir Air cleanerDry, replaceable Oil changeNo-tools oil drain with replaceable filter

TypeGasoline Fuel deliveryPulse pump, carburetor Fuel gaugeGauge on dash Fuel tank locationRear Fuel fill openingOn left fender, 3 in.7.6 cm Fuel tank capacity3.3 U.S. gal.12.5 L

Battery12 V340 CCA Charging systemFlywheel alternator, regulated, 12 amp Engine starterBendix Hour meterYes HeadlightsTwo standard, incandescent, 27 W Taillights or reflectorNo Backup lightsNo Rear work lightsNo 12-V outletOptional

TypeK57 hydrostatic integrated with transaxle ControlTwin Touch™ pedals Cruise controlYes, button on dash Oil coolerFins and fan on transaxle Oil filterInternal, replaceable Differential lockNo Forward speed0-5.8 mph0-9.3 km/h Reverse speed0-3.5 mph0-5.6 km/h BrakesInternal wet disc

FrameWelded heavy-duty Primer/paintE-coat/powder Weight bracketStandard rear, optional front Receiver hitchNo Front axleCast iron front axle, front wheel ball bearings Spindle bushingsMetal, replaceable Front tires15x6-6 Rear tires20x10-8 Hood materialFully enclosed, molded-in color material reduces sound, will not rust or dent Fender deck materialStamped steel Floor matsSure-grip rubber StorageYes, under seat and covered toolbox Service interval decalYes Fender handles/gripsNo Cup holderYes Equipment mountingYes, heavy duty Maximum towing capacity600 lb272 kg

TypePower, hydraulic Four-wheel steerNot available on this model Steering wheelLarge, 14 in.35.6 cm Tilt steering wheelNo Turning radius22 in.55.9 cm Uncut circle radius30 in.76 cm

TypeCut-and-sewn high-back Seat back height18 in.46 cm ArmrestsOptional Fore-aft adjustmentWhile seated, ball bearing slide rail, 15-position, 6.6 in.17 cm Seat suspensionTilt, two coil springs, three-position no-tools adjustment for operator weight

TypeHydraulic Hydraulic outletsNo Mower cut height13 positions, 1-4 in.2.5-10.2 cm Cut height increments0.25 in.0.64 cm Preset cut heightYes

TypeSide discharge Cutting widthAccel Deep™ mower deck, 42 in.107 cm ConstructionStamped steel deck shell Mower deck material12 gauge0.105 in.2.7 mm Mower wash portYes Mower drive systemElectric power take-off (PTO) clutch, in-line belt Mower wheelsTwo Mower wheel adjustmentFour-position, tool required Mower level adjustmentExact Adjust ports and onboard deck-leveling gauge

TypeSlide under tractor Front draft armsAttached with spring pins at two points Rear draft armsTwo pins and spring clips Mower wheels rotateNo Drive systemSingle belt

Meets ANSI standardYes Meets OPEI standardYes Backup protectionReverse Implement Option (RIO) Safety videoYes

NotesFully enclosed, molded-in color material reduces sound, will not rust or dentPower steering for exceptional maneuverability and comfortOne-piece hood for easy service access, molded-in color hood material reduces sound and will not rust or dentDurable E-coat primer and powder-paint finish Warranty4 year/300 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

Mowers42A (standard) Rear bagger2-bag, 7 bu247 L Powered material collection Mulching systemYes, MulchControl™ Front thatcher38, 46, 54 in.96.5, 116.8, 137.2 cm Front blade44 in.111.8 cm Mid-mount blade Snow blowerTwo-stage, 44 in.111.8 cm Rotary broom Rotary tiller Sleeve hitch 3-point hitch Rear power take-off (PTO) Plow, moldboard Box scraper Cultivator Rear blade Disk harrow Landscape rake SprayerTow-behind, 15 U.S. gal.56.8 LTow-behind, 25 U.S. gal.94.6 LMounted, 25 U.S. gal. SpreaderTow-behind, 125 lb57.7 kgTow-behind, 175 lb79.4 kgMounted, 125 lb Front bumperStyled bumper option Brush guardYes Weather protectionWeather enclosure Sun canopyYes Rear receiver hitch Bucket holderYes, double bucket Grass stripingLawn striping kit Tractor shovel40 in.101.6 cm Front loader Other equipment Tow-behind tools16

Height49 in.1244 mm Overall length71.5 in.1817 mm Wheelbase49.4 in.1255 mm Width with mower50.5 in.1283 mm Width with mower (deflector raised for storage)51.2 in.1300 mm Width without mower38 in.964 mm WeightMower, no fuel: 570 lb259 kg

X370 LAWN TRACTOR

21.5-HP (16.0-kW) V-twin engine

The tractor is powered by a John Deere iTorque power system, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.

Key engine features include:

21.5 HP (16.0 kW)
Large 44.3 cu in. (726-cc) displacement
V-twin air-cooled design that provides smooth, quiet power
Quality features include:

Cast-iron cylinder liners
Overhead valves
Full-pressure lubrication
Replaceable oil filter
Dual-stage air cleaner

Excellent power and performance
Easy starts
Smooth operation

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

12-amp charging capacity
Regulated to keep the battery at full charge without risk of overcharging

Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity

Fuel tank

Electronic fuel gauge

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.

Located on the left fender
Helps eliminate spillage

42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean and is versatile

X350 with Accel Deep 42A Mower Deck

4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance

Optional lever-action or electric one-touch MulchControl™ system for superior mulching performance and versatility

Adjustable mower wheels, positioned just above ground level, help reduce scalping

Excellent cut quality

42A Mower Deck underside (shown with optional MulchControl)

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.

Helps maintain excellent cut quality at faster mowing speeds

Productivity. gets the job done fast

Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

Gives a smooth, even discharge of clippings at all mowing speeds
Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening

Cleanliness. for the mower and the operator

Accel Deep 42A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

There are few places to catch and hold material on top and underneath the deck.

Top of deck stays cleaner, reducing time and effort needed for cleaning and service
Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
Less need to clean and remove buildup of material from underside deck

Limited amount of material to drift onto the operator and mower deck
Even flow of material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

The flat-top design reduces places for material to build up and makes material that does collect easy to remove.

Mower wash port

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

Superior durability is designed in

Hinged spindle cover on the 42A

Mower Deck Mower deck wheels are double captured for durability

The 42A Mower Deck has strong spindle s to keep the blades aligned, even after years of tough service:

Ribs in the deck shell add strength where it is needed.
The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) Mower Deck.

Mower wheels are double captured:

Provides greater strength and durability for longer, trouble-free life.
Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

Rolled outer edge of the deck provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility. easy to change between side discharge, mulch, and bagging modes

Rear MulchControl baffle (A) that must be removed for bagging

Rear MulchControl baffle removed to allow for chute installation

The 42A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
The cut-and-throw rear bagger can be used with MulchControl by removing the rear MulchControl baffle (A) before installing the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

7-bu (247-L) rear bagger

X350 with optional rear bagger

Two-piece chute (ordered separately)

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:

7-bu (247-L) capacity
Easy-to-attach two-piece chute (ordered separately)
Air exhaust duct
Convenient spring-latch
Airflow fill indicator
Quik-Tatch mounting
Sealed hopper top
Loose-knit bags available

Mower blades

Mower blades shipped with the rear bagger chute

High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging in most conditions.

Mower blade use chart

Mode(s) of operation	Mower blade
Side discharging mode only	Side-discharge blade (shipped with mower)
Bagging mode only	Bagging blade (shipped with rear bagger chute)
Mulching mode only	Mulching blade (shipped with MulchControl)
Side discharge and mulching	Mulching blade (shipped with MulchControl)
Side discharge and bagging	Bagging blade (shipped with rear bagger chute)
Side discharge, mulching, and bagging	Mulching blade (shipped with MulchControl)

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty is standard for all John Deere X300 Series Tractors.

The warranty is hassle free, with one company handling all the paperwork.
Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

Power steering and hydraulic lift enable easy operation

Power steering cylinder

Tilt steering lever (X390 and X394 only)

Hydraulic power steering is standard equipment:

Provides effortless, automotive-like control
Reduces operator fatigue and increases productivity
Enables a tight turning radius for great maneuverability
Adjustable-tilt steering wheel for optimum operator comfort (X390 and X394 Tractor)

Hydraulic lift system is easy to operate

Hydraulic lift

MulchControl™ system provides superior mulching performance and Rapid conversion

Lever-action MulchControl lever (shown on 48A mower deck)

Electric one-touch MulchControl switch

Creates a beautiful looking lawn
Smaller grass clippings disappear into the lawn canopy
Reduces fertilizer needs
Grass clippings are not blown onto the operator, driveways, or flower beds
No need to dispose of bags of clippings

How MulchControl works

MulchControl baffle open (shown on Z300 48A mower deck)

MulchControl baffle closed (shown on Z300 48A mower deck)

MulchControl is an innovative, simple design that is easy to use and maintain:

The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
The MulchControl handle, or an electric one-touch actuator, is on top of the mower deck and is used to open and close the MulchControl baffle.
When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl is well-suited to the following mowing situations:

For operators who usually mulch, but side discharge when grass gets too long
For operators who usually side discharge, but would like to close the chute to control clippings in some areas
For operators who always mulch a main lawn, but often side discharge secondary lawns
For operators who collect clippings but want to go farther before emptying the material collection system

MulchControl puts the operator in control of the clippings.

Electric one-touch MulchControl

Electric one-touch MulchControl systems shift the MulchControl baffle using an electric actuator that is operated by a dash-mounted switch.

Electric one-touch MulchControl switcht

Electric one-touch MulchControl actuator (shown on 54A mower deck)

Operators can convert between modes without interrupting the mowing process, making it possible to change between modes:

When approaching driveways or flower beds where clippings would be undesirable
When a breeze blows clippings back onto the operator
For side discharge mowing only the areas of the property where grass is too thick for mulching
With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching

MulchControl limitations

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn cleanup is desired
42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

Electric one-touch MulchControl attachments

Attachment	Description	Applications
BUC11632	42-in. (107-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 Series Tractors
BUC11633	48-in. (122-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors
BUC11634	54-in. (137-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors

Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks

MulchControl compatibility

Lever-action MulchControl attachments

Attachment	Description	Applications
BUC10704	42-in. (107-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 Series Tractors, Z300 Series ZTrak™ Mowers
BUC10705	48-in. (122-cm) Accel Deep MulchControl (lever action)	S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
BUC10706	54-in. (137-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers

Snow removal is a strength of lawn tractors

44-in. (112-cm) Front Blade, electric lift, angling and tire chains on an X350 Tractor

44-in. (112-cm) Snow Blower, weather enclosure and tire chains on an X350 Tractor

Equipment available for snow removal includes:

44-in. (112-cm) Snow Blower
44-in. (112-cm) Front Blade
48-in. (122-cm) Front Blade (X394 Tractor only)
Tire chains or TerraGrip traction belts
Weather enclosure (available for all X300 Series, except the X350R)
Weights

Integrated hydrostatic transaxle efficiently transmits power to wheels

Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)

Kanzaki K58 transaxle (X380, X384, X390, X394)

Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:

Use of the latest valve designs has significantly reduced the sound level.
Large pump and motor rotating groups ensure long life and efficient operation.

Freewheeling valve

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Controls are convenient and easy to find

Convenient operator station

Separate throttle and choke controls

The contoured dash has clean, attractive styling and ergonomic controls for easy use:

Controls are color coded for easy identification by the operator.
Controls are logically placed and easy to reach.
The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
The reverse implement option (RIO) switch is a yellow button.
The hydraulic-lift control and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.

The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.

Functional design of the throttle and choke controls provides good appearance and a comfortable feel.

Easy-to-use key switch and controls

Tilt steering lever (X390 and X394 only)

The hydraulic-lift control and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.

The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.

Display panel

Display panel illustration with descriptions

Display panel

Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

Display features dark-cockpit design to minimize operator distractions.
Display is back lit for night visibility.

Night visibility is especially useful with snow blower use.

Target-zone graphics inform the operator of the engine speed range to use for best cut quality.

Damage can be prevented and repair costs can be reduced by addressing problems early.

The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.

Onboard diagnostics provides trouble codes for use by trained technicians.

For example, a technician can test switch functionality and circuit continuity without tools.

Twin Touch™ foot control

Twin Touch foot control

Cruise control

Twin Touch foot pedals control the speed and direction of travel:

Automotive-type accelerator control ensures easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Deck-leveling gauge placed under deck

Cruise control

Cruise control is standard equipment:

To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.

Mower deck height adjustment

Mower cut-height adjusting knob

A rotary dial knob makes adjusting the mower cut height quick and easy:

Provides mower cut heights in 0.25-in. (6.4-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
Returns the mower deck to the same preset height each time it is lowered

Storage tray under tractor seat

Exact Adjust tool used to level mower deck

Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat.

Exact Adjust ports allow for easy and accurate leveling of the mower deck for optimum mowing performance.

Parking brake control

Parking brake

Depressing the brake pedal applies internal wet-disk brakes (increased durability and longer life) for safe stopping.

A parking brake control is conveniently located for easy access; it holds the brake pedal securely in locked position.

Electric PTO clutch is easy and convenient to use

Electric PTO switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Heavy-duty PTO clutch

PTO clutch

The PTO clutch is designed to operate through many on/off cycles.

Reverse implement switch

Mower engagement PTO switch

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

Stop forward travel. Allow attachment to run.
Look down and behind the machine to be sure that there are no bystanders.
Push and hold in the reverse implement switch while depressing the reverse pedal slightly.NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
Resume forward travel. The attachment should continue operating.
Repeat procedure to position the machine again.

Frame is reliable heavy-duty welded steel

Welded, heavy-duty frame

The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.

Optional Quik-Tatch weights

Two 42-lb (19-kg) Quik-Tatch weights on rear hitch plate

Two 42-lb (19-kg) Quik-Tatch weights on an optional front weight bracket/bumper

Optional Quik-Tatch weights can be added to increase traction and ballast equipment.

The rear hitch plate holds up to two 42-lb (19-kg) Quik-Tatch weights.

An optional rear weight is required on X354, X384, and X394 Tractors.

Front axle and wheel spindles are heavy-duty

Cast-iron front axle and steering spindles

Front axle is made of nodular cast iron:

Cast-iron front axle is strong and shock resistant.
Cast iron will not yield under heavy loads or impact.

A replaceable bushing is used at axle mounting:

The bushing provides excellent wear resistance.
Grease fittings at each spindle are easy to service.

Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

Have strength to handle heavy implements
Provide long life at bearing surfaces
Use sealed precision bearings in front wheels

Rear equipment-mounting system is heavy-duty and easy to use

Rear equipment mounting system

A heavy-duty equipment mounting system is used:

Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment
Easily attach optional equipment to the tractor
Can bear the load of heavy rear-mounted equipment, such as material collection systems

Modern styling with functional design enhances appearance and performance

Attractive styling

Hood air-intake louvers

Smooth, rounded contours present a modern, styled appearance:

Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.

Cooler engine operation
Lower operator station sound levels

Reduces sound
Will not rust or dent

Two high-quality headlights give excellent visibility

Headlights are standard equipment on all models:

Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
A headlight position on the ignition switch makes it easy to operate the headlights.
The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

Operator station is comfortable and convenient

Operator station

The operator station is designed for operator comfort and ease of using controls:

A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
Full-length foot mats provide comfort for the operator and protect the footrest area.

Comfortable seat

Comfortable cut-and-sewn seat

Comfortable cut-and-sewn seat with optional armrests

An 18-in. (46-cm), high-back cut-and-sewn seat delivers a comfortable, smooth ride and excellent support for the operator:

A smoother, more comfortable ride results from the use of more foam than in a form-in-place seat and more side-bolstering to stabilize the operator on uneven terrain.
Improved visual appeal is provided by the thicker cushion, additional bolstering in the seat and back, and an embroidered John Deere logo that makes this upscale seat look as good as it feels.
Long-term pliability and less chance of cracking are advantages of the cut-and-sewn process, which does not require heating during the manufacturing process and gives a more uniform vinyl thickness.
Additional operator support and comfort is available with optional BM23761 armrests.
Reduced cost of repair, should the seat cover be damaged, is available with a replaceable seat cover available from Parts.
Seat travel of 6.6 in. (17 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls. Seat can be easily adjusted fore and aft by the operator while sitting on the seat.

Adjustable seat suspension

Seat suspension with springs in rear position

Seat suspension with springs in forward position

The seat suspension is adjustable, without tools, for the weight of the operator:

Springs are adjustable fore and aft to any of three positions.

No tools required
Allows fine-tuning of the suspension for the operator’s weight
Back position for more support for heavier operators

Can be used to store gloves, small tools, etc.
Provides storage location for Exact Adjust tool and deck-leveling gauge

Cup holder and toolbox

Cup holder and covered toolbox on fender

Covered toolbox with open cover

A cup holder and toolbox are located on the fender for operator convenience:

The cup holder holds a variety of container sizes.
Toolbox provides convenient storage.

Toolbox cover snaps closed to provide protection for loose tools, cell phones, etc.

Removable plug for optional 12-V outlet

Location for optional 12-V outlet

A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

Convenient for plugging in cell phone charger and other electric devices

Can be used to operate electric rear equipment, such as a sprayer or spreader

12-V fast connector

Fast connector location

The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

Serviceability is convenient with easy-open hood

One-piece hood is easy to open

Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

Important service points are located within easy reach.
A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.

Easy-to-service engine fuel and oil filters

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

Quick response (QR) codes link to owner information web pages

Example product identification number (PIN) label with QR code

John Deere riding lawn mowers are supported by owner information web pages that include links to:

Safety and how-to videos
Operator’s manuals
Parts catalog
Maintenance reminder sheets
Attachments
Warranty statements

Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy

Deck-leveling gauge and hex adjusting tool stored under tractor seat

Exact Adjust access holes

The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

There is no need to reach under the fender deck while making the mower-level adjustment.
Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.

Level the mower deck side to side
Set the correct amount of rake (front-to-back deck orientation)
Calibrate the cutting height to the cut-height adjusting knob setting

To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.

Deck-leveling tool placed under deck

Using included ball-hex tool to level mower deck

Consult the operator’s manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

Park the tractor on a level surface.
Inflate tires to the correct pressure.
Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.

Cut height adjusting knob

Set mower cutting-height knob to the correct deck-leveling position.
Adjust mower wheels as necessary so they do not contact the ground surface.
Remove the onboard deck-leveling gauge that is located under the seat.
Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points varies slightly between decks.

Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.

Loosen rear nuts equally on each side of front lift rod.
Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
Tighten rear nuts after adjustment is complete.

NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

Help maintain your mower and lawn with the MowerPlus™ app and connector

MowerPlus home screen

MowerPlus maintenance screen

Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

Engine hours, fuel level, and battery health (as compatible)
Mowing history with time, distance, area, and speed
Current day and five-day weather forecast based on location
Walk-through setup guides
Expert mowing tips
Useful attachments for future purchase
Periodic maintenance reminders
Safety instructions

To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

Additional details

MowerPlus connectors (sold separately)

MowerPlus Hour Meter Connector

MowerPlus Deluxe Smart Connector, with a phone

Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

BUC10510 MowerPlus Hour Meter Connector is for use with:

Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
Model year 2015 to 2020 S240 Tractors (serial number.880,000)
S100, S110, S140, and S220 Tractors

BUC10929 MowerPlus Deluxe Smart Connector is for use with:

All S120, S130, S160, S170, and S180 Tractors
Model year 2021 and newer S240 Tractors (serial number 880,001-)
Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

BUC10537 MowerPlus Smart Connector is for use with:

Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Specifications

Compare the specifications of up to 4 models

Key Specs x370-lawn-tractor Current Model Engine powerOil changeEngine manufacturer/modelTransaxle typeTransaxle controlRear tiresLift system typeCutting widthU.S. warrantyPowerDisplacementManufacturer/modelTypeCylindersGovernorChoke/speed controlCooling methodAir cleanerOil changeTypeFuel deliveryFuel gaugeFuel tank locationFuel fill openingFuel tank capacityBatteryCharging systemEngine starterHour meterHeadlightsTaillights or reflectorBackup lightsRear work lights12-V outletTypeControlCruise controlOil coolerOil filterDifferential lockForward speedReverse speedBrakesFramePrimer/paintWeight bracketReceiver hitchFront axleSpindle bushingsFront tiresRear tiresHood materialFender deck materialFloor matsStorageService interval decalFender handles/gripsCup holderEquipment mountingMaximum towing capacityTypeFour-wheel steerSteering wheelTilt steering wheelTurning radiusUncut circle radiusTypeSeat back heightArmrestsFore-aft adjustmentSeat suspensionTypeHydraulic outletsMower cut heightCut height incrementsPreset cut heightTypeCutting widthConstructionMower deck materialMower wash portMower drive systemMower wheelsMower wheel adjustmentMower level adjustmentTypeFront draft armsRear draft armsMower wheels rotateDrive systemMeets ANSI standardMeets OPEI standardBackup protectionSafety videoNotesWarrantyMowersRear baggerPowered material collectionMulching systemFront thatcherFront bladeMid-mount bladeSnow blowerRotary broomRotary tillerSleeve hitch3-point hitchRear power take-off (PTO)Plow, moldboardBox scraperCultivatorRear bladeDisk harrowLandscape rakeSprayerSpreaderFront bumperBrush guardWeather protectionSun canopyRear receiver hitchBucket holderGrass stripingTractor shovelFront loaderOther equipmentTow-behind toolsHeightOverall lengthWheelbaseWidth with mowerWidth with mower (deflector raised for storage)Width without mowerWeight

21.5 hp16.0 kW

No-tools oil drain with replaceable filter

FR651V

K57 hydrostatic integrated with transaxle

Twin Touch™ pedals

20×10-8

Hydraulic

Accel Deep™ mower deck, 42 in.107 cm

4 year/300 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

21.5 hp16.0 kW

44.3 cu in.726 cc

FR651V

Overhead valve, full-pressure lube, oil filter

V-twin, cast-iron liners

Mechanical

Separate levers, automatic choke return

Air

Dry, replaceable

No-tools oil drain with replaceable filter

Gasoline

Pulse pump, carburetor

Gauge on dash

Rear

On left fender, 3 in.7.6 cm

3.3 U.S. gal.12.5 L

12 V340 CCA

Flywheel alternator, regulated, 12 amp

Bendix

Yes

Two standard, incandescent, 27 W

Optional

K57 hydrostatic integrated with transaxle

Twin Touch™ pedals

Yes, button on dash

Fins and fan on transaxle

Internal, replaceable

0-5.8 mph0-9.3 km/h

0-3.5 mph0-5.6 km/h

Internal wet disc

Welded heavy-duty

E-coat/powder

Standard rear, optional front

Cast iron front axle, front wheel ball bearings

Metal, replaceable

15×6-6

20×10-8

Fully enclosed, molded-in color material reduces sound, will not rust or dent

Stamped steel

Sure-grip rubber

Yes, under seat and covered toolbox

Yes

Yes, heavy duty

600 lb272 kg

Power, hydraulic

Not available on this model

Large, 14 in.35.6 cm

22 in.55.9 cm

30 in.76 cm

Cut-and-sewn high-back

18 in.46 cm

Optional

While seated, ball bearing slide rail, 15-position, 6.6 in.17 cm

Tilt, two coil springs, three-position no-tools adjustment for operator weight

Hydraulic

13 positions, 1-4 in.2.5-10.2 cm

0.25 in.0.64 cm

Yes

Side discharge

Accel Deep™ mower deck, 42 in.107 cm

Stamped steel deck shell

12 gauge0.105 in.2.7 mm

Yes

Electric power take-off (PTO) clutch, in-line belt

Two

Four-position, tool required

Exact Adjust ports and onboard deck-leveling gauge

Slide under tractor

Attached with spring pins at two points

Two pins and spring clips

Single belt

Yes

Reverse Implement Option (RIO)

Yes

Fully enclosed, molded-in color material reduces sound, will not rust or dentPower steering for exceptional maneuverability and comfortOne-piece hood for easy service access, molded-in color hood material reduces sound and will not rust or dentDurable E-coat primer and powder-paint finish

42A (standard)

2-bag, 7 bu247 L

Yes, MulchControl™

38, 46, 54 in.96.5, 116.8, 137.2 cm

44 in.111.8 cm

Two-stage, 44 in.111.8 cm

Tow-behind, 15 U.S. gal.56.8 LTow-behind, 25 U.S. gal.94.6 LMounted, 25 U.S. gal.

Tow-behind, 125 lb57.7 kgTow-behind, 175 lb79.4 kgMounted, 125 lb

Styled bumper option

Yes

Weather enclosure

Yes

Yes, double bucket

Lawn striping kit

40 in.101.6 cm

49 in.1244 mm

71.5 in.1817 mm

49.4 in.1255 mm

50.5 in.1283 mm

51.2 in.1300 mm

38 in.964 mm

Mower, no fuel: 570 lb259 kg

.9% APR fixed rate for 48 months 1

on New John Deere X300 Select Series Lawn Tractors

1.9% APR fixed rate for 48 months 1 OR
4.9% APR fixed rate for 60 months 2 OR
No Interest if Paid in Full within 9 Months 3
Offers available 02 May 2023 through 31 July 2023

Buy Online for Free Delivery 1

on Residential Lawn Tractors

Only valid for purchases made through Buy Online.
May be combined with other promotions.
Offer available 02 May 2023 through 31 October 2023.

2 Offer valid on qualifying purchases made 02 May 2023 through 31 July 2023. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 4.9% APR is for 60 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 23.0% APR (as of 01 May 2023). Available at participating U.S. dealers. and models may vary by dealer. Offer available on new equipment and in the U.S. only. and savings in U.S. dollars.

1 Free Delivery offer is available on the following new products when purchased directly through the John Deere Buy Online site from participating John Deere dealers in the United States between 02 May 2023 through 31 Oct 2023: 100 Series Lawn Tractors; 200 Series Lawn Tractors; Select Series™ X300 Lawn Tractors; Select Series™ X500 Lawn Tractors; X700 Signature Series Tractors; Z300, Z500, and Z700 Zero-Turn Mowers; Commercial Walk-Behind Mowers; 600 Series QuikTrak™ Stand-On Mowers; Z900 Series ZTrak™ Zero-Turn Mowers; Gator™ Utility Vehicles; and 1, 2, 3, and 4 Series Compact Tractors. Delivery not available from all dealers. See the ‘Select a Dealer’ screen to find a participating dealer in your area. Valid in the U.S. only.

Sources:

https://byersequipment.com/items/itemid/16709997/-42-in-Deck/
https://www.igra-world.com/john-deere-x370/
https://ag-power.com/Residential/Lawn-Tractors/X300-Series/x370-lawn-tractor
https://www.reynoldsfarmequipment.com/equipment/shop/new/riding-mowers/lawn-tractor/x370-lawn-tractor-with-42-inch-deck/
https://sunsouth.com/Residential/Lawn-Tractors/X300-Series-Lawn-Tractor/x370-lawn-tractor