Lawn tractor weight box. KNOW YOUR BALLAST OPTIONS • CIMFLOK.COM

KNOW YOUR BALLAST OPTIONS

Rule number one of tractor ownership: Don’t tip your tractor. Uneven ground or unfamiliar attachments. really anything that causes a shift in the center of gravity of your equipment. pose a potential tipping danger. and unfortunately, overturning your tractor is the leading cause of fatality on farms in the United States. Enter the ballast. This vital addition keeps the weight of your tractor plus the load you’re carrying safely and evenly distributed (which also extends the life of your tires and front-wheel-drive axle). The real question then isn’t “why do I need a ballast,” it’s “what kind of ballast do I need?”

CALCULATING OPTIMAL BALLAST

Your ballast needs will change based on the attachment and project, so be sure to read the owner’s manual. Ultimately, the goal is to limit wheel slip to 10-15%. What’s wheel slip? Calculate it using the following formula:

(10 tire revolutions with load) – (10 tire revolutions without load) x 100/ (10 tire revolutions with load)

Simply put, if the wheel slip is more than 15%, add a ballast; if it’s less than 10%, remove weight until it’s within optimal range. It’s just as important to remove the ballast when it’s not necessary because too much weight leads to excess fuel consumption and inefficient operation

BALLAST OPTIONS

Tractor Ballast Box

A ballast box for your compact tractor is one of the more versatile balance options for your John Deere Tractor. It adds the weight you need without taking up much space and is easily removed. You can use materials like sand, gravel, rocks, dirt, steel plates, cement, or concrete as filler depending on how much weight you need.

Suitcase Weights

Suitcase weights are individual pieces of cast iron available in 42- or 70-pound weights. They’re easy to use and, because of the design, you don’t have to bolt it onto the tractor. John Deere’s suitcase weights, Quick-tach weights, have a handle and a notched design that safely locks onto a built-in front-end or rear-end bracket. John Deere also carries Quick-tach Heavy Hitch weight brackets, so you can safely use up to eight suitcase weights at a time.

Wheel Weights

Front or rear wheel weights are cast iron or hard plastic shells filled with sand or concrete. Although it’s not as easy to add wheel weights compared to the ballast or suitcase weights, they don’t interfere with the use of attachments. It’s a complicated process, so many owners consider them a semi-permanent solution and leave them on year-round.

Liquid Tire Ballast

Some tractor owners choose the economical liquid tire ballast, using either water or a calcium chloride solution depending on the climate. Keep in mind, however, this reduces ride performance because it increases tire pressure if you don’t adjust accordingly. To ensure stability, it’s important to use the same amount of liquid in each of the front or rear tires.

Having a hard time deciding which of these ballasting options is best for you? Visit your nearest Papé Machinery John Deere dealer to speak to an equipment expert about ballasting options for your compact tractor and intended applications.

S120 LAWN TRACTOR

22-HP (16.4-kW) engine (shown on U.S. model)

A 22-HP (16.4-kW) V-twin engine has plenty of power and torque to handle tough mowing, mulching, and bagging:

V-twin cylinder design for greater torque, lower vibration, and improved sound quality
Electronic ignition for fast starts
Spring-return feature to ensure the operator does not mistakenly leave the throttle lever in the choke position
Cast-iron cylinder liners for longer engine life
Overhead valves for excellent power and fuel economy
Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes

effective when operating the tractor on an incline

Fuel tank

Convenient fuel filler opening

The capacity is 2.4 U.S. gal. (9.1 L).
The fuel filler opening is conveniently located under the seat.

Filling the tank without spilling is easy.
A tethered fuel tank cap is more convenient.
The sealed fuel cap helps keep vapors inside the tank.

John Deere Easy Change™ 30-second oil change system

John Deere Easy Change 30-second oil change system

The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as twisting on a new oil-filled filter. Oil does not need to be drained from the engine.

The John Deere Easy Change filter is an additional engine oil reservoir. Changing the filter removes the captured contaminants and replaces about 0.8 qt (0.76 L) of engine oil.

The functionality does not stop with ease of use. The Easy Change oil system has several meaningful benefits over the traditional oil filter system of the 100 Series:

A synthetic filter material is used for more predictable filtering and longer life.
Filtering capacity is greater than with a standard oil filter.

filter surface area
oil flow capacity

Partly due to these improvements, it is not necessary to remove and dispose of all the oil in the engine during service.

Everyone who uses the John Deere Easy Change system saves time and avoids the mess of a traditional oil change. In the past, many 100 Series Lawn Tractor owners rarely or never got around to changing their engine oil. With the 30-second oil change, even people who previously would not consider changing the oil themselves can easily do it. The Easy Change system is a no-mess, no-fuss solution the competition cannot match.

Installation instructions are in the Operator’s Manual and in the John Deere Easy Change service part box.

Please recycle. Many local government recycling programs, authorized retailers, auto-service centers, and auto-parts stores will puncture and recycle used oil filters and oil.

Frame made of full-length welded steel for reliability

Solid one-piece frame

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.
One-piece, steel fender deck is bolted to the frame.

Cast-iron front axle will not bend

Front axle and wheel spindle

The front axle is constructed of solid cast iron that will not bend:

Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.

Front bumper protects the tractor

Front bumper

The front bumper is included on the S130, S140, S160, S170, and S180. It is available as an optional attachment for the S100, S110, and S120.

CargO Mount™ system makes installation of rear bagger and other attachments easy

Rear CargO Mount points

Front CargO Mount points at the top of the dashboard

Rear bagger is mounted with CargO Mount points

The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

Snow removal is a strength of lawn tractors

Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor

Front blade, weather enclosure, and chains on a 100 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

44-in. (112-cm) Snow Blower
46-in. (117-cm) Front Blade
Tire chains or TerraGrip traction belts
Weather enclosure
Weights

Hydrostatic transmission gives an infinite choice of ground speeds

Two-pedal speed/direction controls

Forward speed control pedal in use

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:

Automotive-type accelerator controls ensure easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

Operator station designed for operator comfort and convenience

Comfortable operator station, S130 shown

The operator station is designed for operator comfort and easy operation:

Controls are positioned where they are easy to reach and use to control the tractor.
The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
The seat is positioned to provide the most comfortable operator position.

Steering wheel and dash, S130 shown

Wide footrest with debris-removal channels

Controls are easy to see and use:

Large, three-spoke steering wheel for greater operator comfort and control
Ignition switch is on the dash for starting ease

Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:

The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
Debris-removing channels help keep the footrest area clean and dry.

Comfortable seat

Easily adjusted seat

Operator comfort is enhanced with a 15-in. (38-cm) high-back, two-piece seat with an open back:

The open-back seat design keeps the operator cooler
Especially helpful when operating the tractor for extended periods of time
Easily adjusted forward or rearward while in the seat
Seat travel of 5.5 in. (14 cm) and 10 different positions to adjust for operator height

Seat springs give a smoother ride

Seat tilted forward

Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.

The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.

Storage compartment

Beverage holder (shown with optional storage compartment cover)

Storage compartment and beverage holder, located on the right-side fender, are conveniently located and easy to use.

lawn, tractor, weight, know, your, ballast

NOTE: A storage compartment cover is standard on S120, S130, S160, S170, and S180 Tractors and optional on the S100, S110, and S140.

Fender flares

Fender flares included on the S130 Tractor cover the tires more completely and add style to the tractor.

Instruments and controls are easy to find and convenient to use

S120 Tractor

Steering wheel and controls on S120

Instruments and controls

The contoured dash has clean, attractive styling:

Controls are color-coded and labeled for easy identification.
Controls are logically placed and easy to reach.
The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
Functional design of the controls provides good appearance and a comfortable feel.

Easy-read fuel gauge shows fuel level on the dashboard

Easy-read fuel gauge

Convenient fuel filler opening

The easy-read fuel gauge shows how much fuel is in the tank and can be seen on the dashboard:

Easy to check fuel level
Convenient location
Visible in cloudy or dusk conditions (is not backlit)
Does not slosh from bumps
The MowerPlus™ smartphone app can read and remember the fuel level (optional MowerPlus deluxe Smart connector required)
The hour meter is also visible on the fuel gauge display

20 TRICKED OUT TRACTORS TO FUEL YOUR FIRE: CUSTOM MOD SHOWCASE!

Side-by-side transmission control pedals

Two-pedal speed/direction controls

Side-by-side foot pedals

Side-by-side foot pedals control the speed and direction of travel:

Automotive-type accelerator controls ensure easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Cruise control (S120, S130, S160, S170, and S180)

Cruise control lever

Cruise control is available on the S120, S130, S160, S170, and the S180:

To engage, lift the cruise lever and hold until the foot is removed from the forward pedal.
The cruise control can be released by pushing on the brake pedal or the forward pedal.

Mower deck height adjustment

Mower deck height adjustment lever

A spring-assisted, ergonomically designed lift lever simplifies adjusting the mower cut height:

Increments of 1/4 in. (0.64 cm) allow fine-tuning the cut height.
Cut height is adjustable from 1 to 4 in. (2.5 to 10.2 cm).
The lift handle is shaped for easy use and is out of the way of entering or exiting operators.

Parking brake control

Brake/parking brake pedal

Parking brake lever

The parking brake control is conveniently located on the tractor pedestal for easy access. It holds the brake pedal securely in the locked position.

Manual power take-off (PTO)

PTO engagement lever

The mower deck is engaged with the easy-to-see and easy-to-use yellow lever above the dashboard. Its placement on the right side leaves a lot of room on the left, the entry side of the tractor, for the operator to get on and off the tractor.

Reverse implement option (RIO)

RIO switch

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

Stop forward travel.
Look behind the machine to be sure there are no bystanders.
Push and hold in the RIO switch while depressing the reverse pedal slightly.

NOTE: If the engine and mower or other attachment stops while repositioning the machine, return the attachment engagement lever/switch to the off position. Start the engine and engage mower or other attachment. Begin again with step 2.

Release the RIO switch and reposition the machine as the machine begins to move rearward.
Resume forward travel. The mower or other attachment should continue operating.
Repeat procedure to position the machine again.

Serviceability is convenient with easy-open hood

One-piece hood is easy to open

Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

Important service points are located within easy reach.
A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.

John Deere Easy Change™ 30-second oil change system

Seat tilted up for easy access to fuel-fill opening

The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as removing the old oil-filled filter and twisting on a new oil-filled filter.

The seat tilts up and out of the way to make adding fuel easy.

Hood will not rust or dent and includes quality headlights

One-piece hood opens for service access

Quality headlights for good visibility

Molded-in color material reduces sound and will not rust or dent.
Same quality hood material as on larger John Deere tractors provides good resilience and UV resistance for an extended time.
Openings on the side let in plenty of cooling air while keeping the sound level low.
Two headlights provide good lighting for nighttime operation.

The MowerPlus™ app helps maintain the tractor and lawn

MowerPlus app screen

MowerPlus app maintenance screen

Keep a John Deere lawn tractor running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

Look for the MowerPlus app on the iOS® or Android™ system app stores.

The app supports residential lawn equipment such as 100 Series, 200 Series, X300, X500, X700, Z200 through Z600, and many similarly sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

NOTE: Some product image variation may exist.

MowerPlus connectors also available (sold separately)

MowerPlus hour meter connector

MowerPlus deluxe Smart connector, with a phone

The John Deere MowerPlus connectors wirelessly link a lawn tractor to the MowerPlus app on a mobile device.

S120, S130, S160, S170, and S180Model year 2021 and later S240 (SN 880,001- )

iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.

The Edge™ cutting system gives superior performance

42-in. (107-cm) Mower Deck

The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior mowing performance, convenience, and reliability:

The deep-deck design lifts grass for a clean, even cut.
The smooth underside has no nooks and crannies, preventing grass buildup and evenly dispersing grass clippings.
The rolled outer edge of the deck provides extra strength and protection.
Dual-stage E-coat and powder paint coatings provide extra protection from rust.
Flexible discharge chute minimizes property and mower deck damage.

The 42-in. (107-cm) Edge Mower Deck is a two-spindle design with heavy-duty characteristics:

The 13-gauge, 0.090-in. (2.3-mm) steel deck provides years of dependable mowing.
Included three-in-one blades work well for side-discharge, mulching, or bagging.
The blade-to-spindle design provides a unique mounting system for the mower blade that provides extra safety and convenience.
No tools are required to switch from mulching to side discharge to rear bagging.
A mulching cover is an optional attachment that can be installed without tools to allow mulching with the standard mower blades.
High-performance mulching blades are available to enhance mulching performance.
A high-performance mulching attachment is an optional attachment that includes a mulch plug and special mulching blades for excellent performance.

Mower wash port

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy:

Optional bagger

6.5-bu (229-L) hopper and chute on an S100

A cut-and-throw, 6.5-bu (229-L) bagger is sold separately and comes with bagging blades. Special bagging blades are not required but they can enhance performance.

The bagger kit provides an efficient means of collecting grass clippings and leaves. It can be set up without tools in minutes and has easy-to-empty bags.

StarLock™ blade design

StarLock blade design

The StarLock blade design keeps the blade bolt at the correct torque for easy removal.

Optional blades for difficult mulching or bagging conditions are available.

Two-year or 120-hour bumper-to-bumper warranty is included

An exclusive 2-year or 120-hour single-source, bumper-to-bumper warranty is included for all John Deere 100 Series Tractors.

Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Specifications

Compare the specifications of up to 4 models

Key Specs s120-lawn-tractor Current Model Engine powerOil changeEngine manufacturer/modelTransaxle typeTransaxle controlRear tiresLift system typeCutting widthU.S. warrantyPowerDisplacementManufacturer/modelTypeCylindersGovernorChoke/speed controlCooling methodAir cleanerOil changeTypeFuel deliveryFuel gaugeFuel tank locationFuel fill openingFuel tank capacityBatteryCharging systemEngine starterHourmeterHeadlightsTaillights or reflectorBackup lightsRear work lights12-V outletTypeControlCruise controlOil coolerOil filterDifferential lockForward speedReverse speedBrakesFramePrimer/paintWeight bracketReceiver hitchFront axleSpindle bushingsFront tiresRear tiresHood materialFender deck materialFloor matsStorageService interval decalFender handles/gripsCup holderEquipment mountingTypeFour-wheel steerSteering wheelTilt steering wheelTurning radiusUncut circle radiusTypeSeat back heightArmrestsFore-aft adjustmentSeat suspensionTypeHydraulic outletsMower cut heightCut height incrementsPreset cut heightTypeCutting widthConstructionMower deck materialMower wash portMower drive systemMower wheelsMower wheel adjustmentMower level adjustmentTypeFront draft armsRear draft armsMower wheels rotateDrive systemMeets ANSI standardMeets OPEI standardBackup protectionSafety videoNotesWarrantyMowersRear baggerPowered material collectionMulching systemFront thatcherFront bladeMid-mount bladeSnow blowerRotary broomRotary tillerSleeve hitch3-point hitchRear power take-off (PTO)Plow, moldboardBox scraperCultivatorRear bladeDisk harrowLandscape rakeSprayerSpreaderFront bumperBrush guardWeather protectionSun canopyRear receiver hitchBucket holderGrass stripingTractor shovelFront loaderOther equipmentTow-behind toolsHeightOverall lengthWheelbaseWidth with mowerWidth with mower (deflector raised for storage)Width without mowerWeight

22 hp16.4 kW

John Deere Easy Change™ 30-second oil change system

44N677 (M44)

TLT200 hydrostatic, two-wheel drive

Side-by-side pedals

20×8-8

Spring-assisted hand-grip lever

Edge™ mower deck, 42 in.107 cm

2 year/120 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

22 hp16.4 kW

44.2 cu in.724 cm

44N677 (M44)

Overhead valve, full-pressure lube, oil filter

V-twin

Mechanical

Single lever with spring-return on choke

Air

Cartridge

John Deere Easy Change 30-second oil change system

Gasoline

Pulse pump and carburetor

Easy-read on dash

Rear

Center, 1.75 in.4.45 cm

2.4 U.S. gal.9.1 L

12 V300 CCA

Regulated, 8 amp

Bendix type

Yes

Two standard, incandescent

Hydrostatic, 2-wheel drive

Side-by-side pedals

Standard

Fins and fan on transaxle

Yes, not serviceable

0-5.5 mph0-8.9 km/h

0-3.2 mph0-5.2 km/h

Internal wet disk

Full-length welded steel

E-coat/powder

Optional rear

Cast-iron front axle, powdered-metal front wheel bushings

15×6-6

20×8-8

Molded-in color material reduces sound, will not rust or dent

Stamped steel

Yes, with debris removing channels

Storage tray with cover

Yes

CargO Mount™ system

Sector and pinion with single drag link and tie rod

Not available on this model

Standard, diameter. 12 in.30.5 cm

18 in.45.7 cm

25 in.63.5 cm

Two piece with open-back

15 in.38 cm

While seated, 5.5 in.14 cm

Tilt, two coil springs

Spring-assisted hand-grip lever

13 positions, 1-4 in.2.5-10.2 cm

0.25 in.0.64 cm

Side discharge

Edge™ mower deck, 42 in.107 cm

Stamped steel deck shell

Steel, 13 gauge0.09 in.2.3 mm

Yes

Manual power take-off (PTO)

Two

One bolt

Easy-level deck

Slide under tractor

One spring clip

Two spring clips

Single belt

Yes

Reverse Implement Option (RIO)

Yes

Molded-in color material reduces sound, will not rust or dentDurable primer and powder paint finishFull-length welded steel frameJohn Deere Easy Change 30-second oil change system

2-bag, 6.5 bu229 L

Mulch cover or high-performance plug

46 in.116.8 cm

Two-stage, 44 in.111.8 cm

Tow-behind, 15 U.S. gal.56.8 LMounted, 15 U.S. gal.Tow-behind only, 25 U.S. gal.94.6 L

Tow-behind only, 125-175 lb57.7-80 kg

Styled front bumper

Weather enclosure

Sun canopy

Yes, single bucket

Lawn striping kit

44 in.112 cm

69.7 in.177 cm

48.9 in.124.2 cm

55.2 in.140.2 cm

46.5 in.118.1 cm

Mower, no fuel, 444 lb201 kg

No Interest if Paid in Full within 9 months 1

on New John Deere 100 Series Lawn Tractors

No Interest if Paid in Full within 9 months 1
Offer available 02 May 2023 through 31 July 2023

Buy Online for Free Delivery 1

on 100 200 Series Lawn Tractors

Only valid for purchases made through Buy Online.
May be combined with other promotions.
Offer available 02 May 2023 through 31 October 2023.

1 Offer valid on qualifying purchases made 02 May 2023 through 31 July 2023. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. Interest will be charged to your account from the purchase date at 17.90% APR if the purchase balance is not paid in full within 9 months or if your account is otherwise in default. Available at participating U.S. dealers. and models may vary by dealer. Offer available on new equipment and in the U.S. only. and savings in U.S. dollars.

1 Free Delivery offer is available on the following new products when purchased directly through the John Deere Buy Online site from participating John Deere dealers in the United States between 02 May 2023 through 31 Oct 2023: 100 Series Lawn Tractors; 200 Series Lawn Tractors; Select Series™ X300 Lawn Tractors; Select Series™ X500 Lawn Tractors; X700 Signature Series Tractors; Z300, Z500, and Z700 Zero-Turn Mowers; Commercial Walk-Behind Mowers; 600 Series QuikTrak™ Stand-On Mowers; Z900 Series ZTrak™ Zero-Turn Mowers; Gator™ Utility Vehicles; and 1, 2, 3, and 4 Series Compact Tractors. Delivery not available from all dealers. See the ‘Select a Dealer’ screen to find a participating dealer in your area. Valid in the U.S. only.

Utility Cart, 7P Poly. 3020GXLP21935

7P Poly Utility Cart

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

7P Poly Utility Cart

The cart has a premium molded, high-density polyethylene box construction.
Compression molding process allows polyethylene to be the optimum thickness in all areas for superior strength and durability.
Polyethylene body will not rust or dent; it stays looking new longer.
0.75-in. (2-cm) x 2-in. (5-cm) stake s are molded in to make the addition of side extensions easy.
Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
Styling is compatible with other John Deere equipment.
Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.

7P Utility Cart wheel

Wheels are mounted on a solid, one-piece axle for durability.

Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

Sloped tailgate

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch

A large-diameter hitch pin provides plenty of strength:

Fast, easy attachment to the tractor hitch
Spring pin to ensure the pin stays in place

Tilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m 3 )	High-density polyethylene (HDPE)	450 lb (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m 3 )	HDPE	300 lb (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	X700 Series

The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

HDPE is compression molded for optimum thickness in all areas and maximum durability.

Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X	X	X
L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X	X	X
LX280, LX280AWS, LX289	X	X	X	X	X	X
X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility CartOrder number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 8Y Convertible Poly. 3020GXLP22755

8Y Convertible Poly Utility Cart, push mode

8Y Convertible Poly Utility Cart, tow-behind mode

The 8-cu-ft (0.23-m 3 ) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Compatible with riding lawn tractors and garden tractors
Durable poly construction
All-terrain pneumatic tires
Converts from tow cart to push cart without tools
Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m 3 )	High-density polyethylene (HDPE)	450 lb (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m 3 )	HDPE	300 lb (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	X700 Series

The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X	X	X
L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X	X	X
LX280, LX280AWS, LX289	X	X	X	X	X	X
X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility CartOrder number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 10P Poly. 3020GXLPPCT10JD

10P Poly Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

Firewood
Lawn debris
Sand
Dirt
Mulch
Garden tools
Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
Will not dent or rust
15×6 tubeless pneumatic tires with turf tread for maximum traction
Easy, hands-free foot pedal dump release
Steep dump angle for complete emptying

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m 3 )	High-density polyethylene (HDPE)	450 lb (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m 3 )	HDPE	300 lb (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	X700 Series

HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X	X	X
L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X	X	X
LX280, LX280AWS, LX289	X	X	X	X	X	X
X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering informationPlease contact a local John Deere dealer for availability and pricing information.

10P Poly Utility CartOrder number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 10PX Poly with full dump. 3020GXLP72978

10PX Poly Utility Cart

10PX Poly Utility Cart full-dump lever

The 10PX tow-behind cart is great for hauling lawn debris, sand, dirt, mulch, and plants:

Large, 650-lb (295-kg) capacity
10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
Will not dent or rust
15×6 tubeless pneumatic tires with turf tread for maximum traction
Easy, hands-free foot pedal dump release

Cart in partial-dump position

Cart in full-dump position

Hand lever releases 180-degree dump angle for complete emptying

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m 3 )	High-density polyethylene (HDPE)	450 lb (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m 3 )	HDPE	300 lb (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	X700 Series

HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X	X	X
L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X	X	X
LX280, LX280AWS, LX289	X	X	X	X	X	X
X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering informationPlease contact a local John Deere dealer for availability and pricing information.

10PX Poly Utility CartOrder number: LP72978

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 13 Steel. 3020GXLPHDC13JD

13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Welded box construction provides maximum reliability:

Requires less setup time than the bolted construction.
Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.

Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch

A large-diameter hitch pin provides plenty of strength:

Fast, easy attachment to the tractor hitch
Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m 3 )	High-density polyethylene (HDPE)	450 lb (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m 3 )	HDPE	300 lb (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	X700 Series

The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X	X
L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X	X
LX280, LX280AWS, LX289	X	X	X	X	X
X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility CartOrder number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 16YS Swivel Poly. 3020GXLP68186

16YS Swivel Cart

The 17-cu-ft (0.48-m³) capacity 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
Convenient foot pedal release for easy dumping
Molded stake s for enlarging the bed size

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m 3 )	High-density polyethylene (HDPE)	450 lb (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m 3 )	HDPE	300 lb (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	X700 Series

HDPE is compression molded for optimum thickness in all areas and maximum durability.

The best cordless lawn mowers in 2023

Looking for the best cordless mower? Browse our experts’ pick, from budget to premium models.

A lawn mower may be one of the first purchases we make when getting a garden of our own, but that doesn’t mean finding a good quality one is easy. There are so many models and brands on the market to choose from, including corded electric and petrol, but as their range increases and fall, cordless, battery-powered models are an increasingly popular option.

Light and compact compared with traditional petrol models, cordless mowers are simple to use, easy to manoeuvre around the garden, and have none of the maintenance and servicing needs or costs of petrol lawnmowers. Powered by a rechargeable lithium-ion battery, which charges up quickly and won’t lose power in storage, they’re also quiet and emission free.

To compare these cordless mowers against other types of mower, we’ve reviewed the best lawn mowers, robotic lawn mowers, electric lawn mowers and push mowers, too. And if your lawn needs a bit of attention, our experts have tested a range of the best manual and powered aerators and scarifiers.Keep edges looking neat with our pick of the best strimmers, the best garden shears and the best lawn edging, and if you’re thinking about somewhere to store your new mower, our comprehensive guide to choosing the best garden shed will be helpful.

For your next DIY project, have a look at the best cordless drills.

The best cordless mowers to buy at a glance

Cordless mowers. Buyer’s Guide video

Many thanks to Rosie Yeomans and Sparsholt College for their help in making this video.

Getting the best cordless lawn mower for you means ensuring it has the correct cutting width, range of cutting heights, and weight plus a battery run time that matches the size of your lawn. We’ve tested a range of cordless push mowers, putting them through their paces across a range of grass and terrains, to help you find the right one for your garden.

Each mower has a detailed list of pros and cons for clarity and has been rated according to set up and storage, handling, mowing and value for money. Every mower in our round up below has scored a minimum of four out of five stars, so you can buy with confidence.

In every review we award outstanding products our coveted Best Buy award. To see these and the others we recommend, browse our pick of the best cordless lawn mowers, below.

By entering your details, you are agreeing to our terms and conditions and privacy policy. You can unsubscribe at any time.

Best Buy cordless mowers

Husqvarna Aspire LC34-P4A

Our rating: 4.9 out of 5

Quiet
Cuts even long grass with ease
Battery level visible while mowing
Small and compact for easy storage
Part of the POWER FOR ALL cordless range

Part of the new Husqvarna Aspire cordless range, which includes a hedge trimmer, pruner and leaf blower, this 34cm mower is powered by an 18V POWER FOR ALL ALLIANCE battery and charger. These are interchangeable with tools in other leading brands such as Flymo, Gardena and Bosch so if you also invest in tools in these ranges, you’ll only need to buy the bare tool and won’t have different batteries and chargers taking up space in the shed.Great for small gardens the mower comes ready to go, there’s no assembly or handles to attach, and it folds down to a compact size when you’re finished, with a telescopic handle that folds completely flat over the body of the mower. It can then be stood up against a wall or hung up, and even comes with a handy hook. The 30l grass bag also flattens down to take up very little room and can be hung on the mower. The Aspire is light, with a carry handle so that lifting it up steps or into other areas is easy and it has an adjustable handle to suit different height users. It’s comfortable and easy to manoeuvre around the garden and has just four cutting heights to choose from, ranging from 25-65mm and changed easily with a single lever on the body of the mower. It cuts grass quietly and smoothly and has an automatic boost that increases blade speed when you’re mowing in tougher, longer areas that works well. You can hear it kick in when you push the mower into longer grass and unlike other cordless mowers that can cut out, just carries on cutting the grass. While you mow the battery charge level is always clearly visible so you know how much battery you have left and when it needs charging. It comes with a two year warranty and we awarded it a BBC Gardeners’ World Magazine Best Buy in 2023 for ease of use.

Specs: Battery: charge time. 95 mins; run time. 500sqm. Cutting: width. 34cm; height. 25-65mm. Grass box. 30 litre.

Buy the Husqvarna Aspire C34-P4A cordless mower from Husqvarna and Sam Turner

Greenworks GDG24LM33

Our rating: 4.5 out of 5

Easy to assemble and use
Comfortable padded handle
Choice of mulching or collecting clippings
Interchangeable battery with Greenworks 24V family

Ideal for smaller gardens this sturdy, great value cordless mower is easy to put together, well thought out and simple to use. Thanks to a padded handle it’s comfortable to push, although it did feel a little short for our taller tester, and it’s light and easy to manoeuvre around trees and beds and borders. There are five cutting heights to choose from, adjusted with the simple lift of a lever and it offers the choice of collecting clippings in the 30 litre fabric grass bag or inserting the mulching plug and leaving them on the lawn to break down and feed the grass. It mows well but doesn’t like very long grass, with the battery cutting out occasionally but its long lasting brushless motor offers a a decent run time of 46 minutes and it charges in two hours. Plus, as part of the Greenworks 24V family, both the battery and charger are interchangeable with all the other tools in the range, saving you money if you invest in more in the future. We awarded it a BBC Gardeners’ World Magazine Best Buy for the best budget cordless mower in 2023.

Specs: Battery: charge time. 120 mins; run time. 46mins. Cutting: width. 33cm; height. 25-70mm. Grass box. 30 litre.

Yard Force LMG37A 40v 37cm

Our rating: 4.8 out of 5

Rear roller
Double folding handle for easy storage
Quickest charge time
Part of the Yardforce GR40 cordless range

This sturdy mower has a 37cm cutting width and useful features including a rear roller for those much desired stripes. Awarded a BBC Gardeners’ World Magazine Best Buy in 2022 for small to medium lawns, clippings are collected in the large 40 litre fabric grass bag. It offers a wide choice of seven cutting heights, from 25-75mm, and is easy to fold away at the end of the day. The 40V battery is quick to charge, taking just 50 minutes and when full it has the capacity to cut a 400m2 lawn.

Specs: Battery: charge time. 50 mins; run time. 400sqm. Cutting: width. 37cm; height. 25-75mm. Grass box. 40 litre.

Buy the Yard Force LMG37A 40V 37cm cordless mower from Yard Force, Amazon and Wickes

X330 LAWN TRACTOR 48 IN

22-HP (16.4-kW) engine

The 22-HP (16.4-kW) V-twin engine used in the Select Series™ X330 Tractor provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

V-twin cylinder design for greater torque, lower vibration, and improved sound quality
Large, 44.2-cu in. (724-cc) displacement

Plenty of torque helps to get the job done fast.
Large displacement engine increases the ability to get an even cut without mowing a second time.
Camshaft and carburetor designs create the optimum torque rise for Rapid response to varying load conditions.

Cyclonic air filter

Air filter cover

Air filter with foam precleaner

Cyclonic air-management system removes larger particles of dirt before they reach the air filter for reduced filter maintenance and longer engine life:

Cyclonic design ejects large dirt particles before they contact the filter.
Large, high-quality dry-type paper element air filter thoroughly cleans engine intake air.
The cover over the air filter is easily removed with two knobs for cleaning or replacement of the filter.

Engine oil check/fill tube and oil-drain hose

Oil drain hose

Engine oil check and fill tube is conveniently located for easy access. Oil drain hose makes draining oil easy and clean.

Engine oil filter

Replaceable engine oil filter and fuel filter

Replaceable oil filter and fuel filter are easy to access and change to minimize service time and cost.

Debris inspection port covers

Debris inspection port

Two debris inspection ports help ensure clean engine fins for optimum cooling. Bolts to open them are conveniently located under the air filter cover.

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

14-amp charging capacity
Regulated to keep the battery at full charge without risk of overcharging

Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity

Fuel tank

Electronic fuel gauge

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.

Located on the left fender
Helps eliminate spillage

48-in. (122-cm) Accel Deep™ (48A) Mower Deck cuts clean and is versatile

X394 with Accel Deep 48A Mower Deck

Accel Deep 48A Mower Deck

The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:

4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance

Optional lever-action or electric one-touch MulchControl™ system provides superior mulching performance and versatility.

Adjustable mower wheels, positioned just above ground level, help reduce scalping

Excellent cut quality

48A Mower Deck top (similar mower from X700 Series Tractor shown)

48A Mower Deck underside (similar mower from X700 Series Tractor shown)

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.

Helps maintain excellent cut quality at faster mowing speeds

Productivity. getting the job done fast

Right side of Accel Deep 48A Mower Deck

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:

Greatly improves mower’s capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

Gives a smooth, even discharge of clippings at all mowing speeds
Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
The 48A Power Flow blower has an inlet housing with over 50 percent greater area than the 48X Power Flow blower used on previous machines.

Cleanliness. for the mower and the operator

Accel Deep 48A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

There are few places to catch and hold material on top and underneath the deck.

Top of deck stays cleaner, reducing time and effort needed for cleaning and service
Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
Less need to clean and remove buildup of material from underside deck

Limited amount of material to drift onto the operator and mower deck
Even for material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

The flat-top design reduces places for material to build up and makes material that does collect easy to remove.

Mower wash port

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

Superior durability is designed in

Spindle with flip-up cover

Easy-to-adjust mower wheel and mower side reinforcement

The 48A Mower Deck has strong spindle s, to keep the blades aligned, even after years of tough service:

Stamped from strong 10-gauge, 0.135-in. (3.4-mm) steel
Ribs in the deck shell add strength where it is needed
The 48A has a 23 percent heavier overall weight than the Edge™ Xtra 48-in. (122-cm) Mower Deck used on previous machines.

Mower wheels are heavy duty:

Provides greater strength and durability for longer, trouble-free life.
Setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.

The 48A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility. easy to change between side discharge, mulch, and bagging modes

The 48A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
The Power Flow rear bagger can be used with MulchControl by simply using the MulchControl lever or electric one-touch switch to move the mulch baffle to the side-discharge position.

7-bu (247-L) Power Flow rear bagger

Optional rear bagger

Power Flow blower

An optional 7-bu (247-L) rear bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:

The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.
The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:

7-bu (247-L) capacity
Easy-to-attach Power Flow blower (ordered separately)
Easy-to-attach chute (ordered separately)
Air exhaust duct
Convenient spring-latch
Airflow fill indicator
Quik-Tatch mounting
Sealed hopper top
Loose-knit bags available

Larger 14-bu (493-L) and 19-bu (670-L) MCS are available, in addition to the 7-bu (247-L) MCS, for specific X300 and X500 Series Tractor models.

Mower blades

Side-discharge blades can be used with the Power Flow system when bagging.

Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging.

Mower blade use chart

Mode(s) of operation

Mower blade

Side discharging mode only

Side-discharge blade (shipped with mower)

Mulching blade (shipped with MulchControl)

Side discharge and mulching

Mulching blade (shipped with MulchControl)

Either side-discharge or mulching blade

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty is standard for all John Deere X300 Series Tractors.

The warranty is hassle free, with one company handling all the paperwork.
Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

MulchControl™ system provides superior mulching performance and Rapid conversion

Lever-action MulchControl lever (shown on 48A mower deck)

Electric one-touch MulchControl switch

The optional MulchControl system makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

Creates a beautiful looking lawn
Smaller grass clippings disappear into the lawn canopy
Reduces fertilizer needs
Grass clippings are not blown onto the operator, driveways, or flower beds
No need to dispose of bags of clippings

How MulchControl works

MulchControl baffle open (shown on 48A mower deck)

MulchControl baffle closed (shown on 48A mower deck)

MulchControl is an innovative, simple design that is easy to use and maintain:

The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
The MulchControl handle, or an electric one-touch actuator, is on top of the mower deck and is used to open and close the MulchControl baffle.
When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl is well-suited to the following mowing situations:

For operators who usually mulch, but side discharge when grass gets too long
For operators who usually side discharge, but would like to close the chute to control clippings in some areas
For operators who always mulch a main lawn, but often side discharge secondary lawns
For operators who collect clippings but want to go farther before emptying the material collection system

MulchControl puts the operator in control of the clippings.

Electric one-touch MulchControl

Electric one-touch MulchControl systems shift the MulchControl baffle using an electric actuator that is operated by a dash-mounted switch.

Electric one-touch MulchControl switcht

Electric one-touch MulchControl actuator (shown on 42A mower deck)

Operators can convert between modes without interrupting the mowing process, making it possible to change between modes:

When approaching driveways or flower beds where clippings would be undesirable
When a breeze blows clippings back onto the operator
For side discharge mowing only the areas of the property where grass is too thick for mulching
With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching

MulchControl limitations

While in the side discharge mode, MulchControl still mulches about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn cleanup is desired
42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

When bagging with MulchControl on a 48A or 54A mower deck, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower runs without material when the baffle is closed.

Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks

When bagging with MulchControl on a 42A mower deck, the cut-and-throw rear bagger can be used with the MulchControl blades. However, the rear MulchControl baffle (A) needs to be removed to install the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

MulchControl compatibility

Each MulchControl system is an optional field-installed attachment and includes everything needed: baffles, mulch blades, a handle (lever action attachments) or an actuator, wiring, and switches (electric one-touch attachments).

Lever-action MulchControl attachments

Attachment	Description	Applications
BUC10704	42-in. (107-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 Series Tractors, Z300 Series ZTrak™ Mowers
BUC10705	48-in. (122-cm) Accel Deep MulchControl (lever action)	S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
BUC10706	54-in. (137-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers

Electric one-touch MulchControl attachments

Attachment	Description	Applications
BUC10164	42-in. (107-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 Series Tractors
BUC10165	48-in. (122-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors
BUC10166	54-in. (137-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors

NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Snow removal is a strength of lawn tractors

44-in. (112-cm) Front Blade

Snow blower, weather enclosure, and chains on an X300 Series Tractor

Equipment available for snow removal includes:

44-in. (112-cm) Snow Blower
44-in. (112-cm) Front Blade
48-in. (122-cm) Front Blade (X394 Tractor only)
Tire chains or TerraGrip traction belts
Weather enclosure (available for all X300 Series, except the X350R)
Weights

Steering is low-effort sector and pinion system

Tight turning radius

Designed for easy turns

A heavy-duty sector and pinion steering system with quality bearings provides easy and precise control for the life of the tractor:

Small, 16-in. (40.6-cm) turning radius provides excellent maneuverability
Tight turning ability improves mowing efficiency

Easy steering

Easy steering is important for an enjoyable mowing experience:

Long steering arms to improve the mechanical advantage of the steering system through the full range of motion

Integrated hydrostatic transaxle efficiently transmits power to wheels

Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)

Kanzaki K58 transaxle (X380, X384, X390, X394)

The Tuff Torq® hydrostatic transaxle encloses the hydrostatic pump and motor rotator groups in the same housing with the differential and axle housings. This design is very efficient and reduces the number of sealing surfaces to minimize the potential for leakage.

Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:

Use of the latest valve designs has significantly reduced the sound level.
Large pump and motor rotating groups ensure long life and efficient operation.

Freewheeling valve

A freewheeling valve control is conveniently located near the tractor rear hitch plate for good visibility and easy operation.

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Controls and display functions are easy to identify and convenient to use

X350 Tractor mowing

Steering wheel and controls (switch turned on to show display)

The contoured dash has clean, attractive styling and ergonomic controls for easy use:

Controls are color coded and labeled with English words for easy identification by the operator.
Controls are logically placed and easy to reach.
The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
The reverse implement option (RIO) switch is a yellow button.
The latch control on foot-lift models and hydraulic-lift control on power-lift models and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.

The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.

Display panel

Display panel illustration with descriptions

Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

Display features dark-cockpit design to minimize operator distractions.
Display is back lit for night visibility.

Night visibility is especially useful with snow blower use.

The X350R has a low fuel light, rather than a fuel gauge, to provide the operator with a noticeable warning when low on fuel.

Target-zone graphics inform the operator of the engine speed range to use for best cut quality.

Damage can be prevented and repair costs can be reduced by addressing problems early.

The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.

Onboard diagnostics provides trouble codes for use by trained technicians.

For example, a technician can test switch functionality and circuit continuity without tools.

Twin Touch™ foot control

Twin Touch foot control

Cruise control

Twin Touch foot pedals control the speed and direction of travel:

Automotive-type accelerator control ensures easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Cruise control

Cruise control is standard equipment:

To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.

Mower deck height adjustment

Cut height adjusting knob

A rotary dial knob makes adjusting the mower cut height quick and easy:

Provides mower cut heights in 0.25-in. (0.64-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
Returns the mower deck to the same preset height each time it is lowered

Storage tray under tractor seat

Exact Adjust tool is used to level mower deck

Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat:

Exact Adjust ports on the fender deck allow for easy and accurate leveling of the mower deck for optimum mowing performance.

Deck-leveling gauge placed under deck

Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.

Foot-pedal lift system

Pushing with the foot to raise the mower or implement is less strenuous for many operators than using a hand-lift lever:

The easy-to-use raised position lock operates similarly to the park brake lock.
The foot pedal is out of the way and not likely to catch on bushes and tree limbs when mowing.
The mower deck returns to the same preset height each time it is lowered.

Adjustable lift-assist spring

Lift-assist spring decals and adjusting bolt

Close-up of lift-assist spring decal

NOTE: The adjustable lift-assist spring is standard equipment on tractors with manual foot-lift system that are shipped with the 48-in. (122-cm) and 54-in. (137-cm) side-discharge mowers, and an option for tractors shipped with 42-in. (107-cm) mowers. It is a recommended option for foot-lift tractors sold with the 42-in. (107-cm) mulch mower.

Lift-assist spring is provided on tractors shipped from the factory with a 48-in. (122-cm) or 54-in. (137-cm) side-discharge mower deck, except models with hydraulic lift, and a recommended option for tractors equipped with a 42-in. (107-cm) mulch mower to minimize lift effort.

Lift effort can be easily adjusted by turning a bolt, located on the tractor front bumper, for optimum performance, depending on the equipment used (mower, front blade, snow blower, etc.).

When installing or removing a mower or front equipment raised by the foot-lift system, spring tension may be removed from the connection points by pulling rearward on the lift pedal and raising the lift latch to hold the pedal in the rearward position.

Parking brake control

Parking brake

Depressing the brake pedal applies internal wet-disk brakes, which provide better reliability and longer life than external brakes, for safe stopping.

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

Electric PTO clutch is easy and convenient to use

Electric PTO switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Heavy-duty PTO clutch

PTO clutch

The PTO clutch is designed to operate through many on/off cycles.

Reverse implement switch

Mower engagement PTO switch

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

Stop forward travel. Allow attachment to run.
Look down and behind the machine to be sure that there are no bystanders.
Push and hold in the reverse implement switch while depressing the reverse pedal slightly.NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
Resume forward travel. The attachment should continue operating.
Repeat procedure to position the machine again.

Frame is reliable heavy-duty welded steel

Welded, heavy-duty frame

The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.

Weight bracket is built into the frame of two-wheel-steer models.
Four-wheel-steer models require the optional weight bracket.

Front axle and wheel spindles are heavy-duty

Cast-iron front axle

Front axle is made of nodular cast iron:

Cast-iron front axle is strong and shock resistant.
Cast iron will not yield under heavy loads or impact.

A replaceable bushing is used at axle mounting:

The bushing provides excellent wear resistance.
Grease fittings at each spindle are easy to service.

Front steering spindles

Steering spindle

Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

Have strength to handle heavy implements
Provide long life at bearing surfaces
Use sealed precision bearings in front wheels

Rear equipment-mounting system is heavy-duty and easy to use

Rear equipment mounting system

A heavy-duty equipment mounting system is used:

Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment
Easily attach optional equipment to the tractor
Can bear the load of heavy rear-mounted equipment, such as material collection systems

Modern styling with functional design enhances appearance and performance

Attractive styling

Hood air-intake louvers

Smooth, rounded contours present a modern, styled appearance:

Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.

Cooler engine operation
Lower operator station sound levels

Reduces sound
Will not rust or dent

Two high-quality headlights give excellent visibility

Optimum lighting pattern

Headlights are standard equipment on all models:

Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
A headlight position on the ignition switch makes it easy to operate the headlights.
The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

Operator station is comfortable and convenient

Operator station

The operator station is designed for operator comfort and ease of using controls:

A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
Full-length foot mats provide comfort for the operator and protect the footrest area.

Comfortable seat

Comfortable open-back seat

An open-back 15-in. (38-cm) high-back seat provides a comfortable, smooth ride and good support for the operator:

Seat travel of 6.6 in. (17 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls.
Seat can be easily adjusted fore and aft by the operator while sitting on the seat.
Open-back design allows air circulation to keep the operator’s back cool and dry for a more comfortable ride.
Grasp at the top of the seat is conveniently located for use when tilting the seat up to protect it from the weather.

Adjustable seat suspension

Seat suspension with springs in rear position

Seat suspension with springs in forward position

The seat suspension is adjustable, without tools, for the weight of the operator:

Springs are adjustable fore and aft to any of three positions.

No tools required
Allows fine-tuning of the suspension for the operator’s weight
Back position for more support for heavier operators

Can be used to store gloves, small tools, etc.
Provides storage location for Exact Adjust tool and deck-leveling gauge

Cup holder and toolbox

Cup holder and covered toolbox on fender

Covered toolbox with open cover

A cup holder and covered toolbox are located on the fender for operator convenience:

The cup holder holds a variety of container sizes.
Toolbox provides convenient storage.

Toolbox cover snaps closed to provide protection for loose tools, cell phones, etc.

Removable plug for optional 12-V outlet

Location for optional 12-V outlet

A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

Convenient for plugging in cell phone charger and other electric devices

Can be used to operate electric rear equipment, such as a sprayer or spreader

12-V fast connector

Fast connector location

A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:

The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

Serviceability is convenient with easy-open hood

One-piece hood is easy to open

Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

Important service points are located within easy reach.
A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.

Easy-to-service engine fuel and oil filters

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

Quick response (QR) codes link to owner information web pages

Example product identification number (PIN) label with QR code

John Deere riding lawn mowers are supported by owner information web pages that include links to:

Safety and how-to videos
Operator’s manuals
Parts catalog
Maintenance reminder sheets
Attachments
Warranty statements

To speed access to owner information web pages, a QR code is printed onto a PIN label located under the hood on trim side of the steering pedestal. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.

Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy

Deck-leveling gauge and hex adjusting tool stored under tractor seat

Exact Adjust access holes

A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.

Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.

The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

There is no need to reach under the fender deck while making the mower-level adjustment.
Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.

Level the mower deck side to side
Set the correct amount of rake (front-to-back deck orientation)
Calibrate the cutting height to the cut-height adjusting knob setting

To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.

Deck-leveling tool placed under deck

Using included ball-hex tool to level mower deck

Consult the operator’s manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

Park the tractor on a level surface.
Inflate tires to the correct pressure.
Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.

Cut height adjusting knob

Set mower cutting-height knob to the correct deck-leveling position.
Adjust mower wheels as necessary so they do not contact the ground surface.
Remove the onboard deck-leveling gauge that is located under the seat.
Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points varies slightly between decks.

Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.

Loosen rear nuts equally on each side of front lift rod.
Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
Tighten rear nuts after adjustment is complete.

NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

Help maintain your mower and lawn with the MowerPlus™ app and connector

MowerPlus home screen

MowerPlus maintenance screen

Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

Engine hours, fuel level, and battery health (as compatible)
Mowing history with time, distance, area, and speed
Current day and five-day weather forecast based on location
Walk-through setup guides
Expert mowing tips
Useful attachments for future purchase
Periodic maintenance reminders
Safety instructions

To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

MowerPlus Hour Meter Connector

MowerPlus Deluxe Smart Connector, with a phone

Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

BUC10510 MowerPlus Hour Meter Connector is for use with:

Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
Model year 2015 to 2020 S240 Tractors (serial number.880,000)
S100, S110, S140, and S220 Tractors

BUC10929 MowerPlus Deluxe Smart Connector is for use with:

All S120, S130, S160, S170, and S180 Tractors
Model year 2021 and newer S240 Tractors (serial number 880,001-)
Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

BUC10537 MowerPlus Smart Connector is for use with:

All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.

MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.

Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Additional details

MowerPlus connectors (sold separately)

Specifications

Compare the specifications of up to 4 models

Key Specs x330-lawn-tractor-48-in Current Model Engine powerOil changeEngine manufacturer/modelTransaxle typeTransaxle controlRear tiresLift system typeCutting widthU.S. warrantyPowerDisplacementManufacturer/modelTypeCylindersGovernorChoke/speed controlCooling methodAir cleanerOil changeTypeFuel deliveryFuel gaugeFuel tank locationFuel fill openingFuel tank capacityBatteryCharging systemEngine starterHour meterHeadlightsTaillights or reflectorBackup lightsRear work lights12-V outletTypeControlCruise controlOil coolerOil filterDifferential lockForward speedReverse speedBrakesFramePrimer/paintWeight bracketReceiver hitchFront axleSpindle bushingsFront tiresRear tiresHood materialFender deck materialFloor matsStorageService interval decalFender handles/gripsCup holderEquipment mountingMaximum towing capacityTypeFour-wheel steerSteering wheelTilt steering wheelTurning radiusUncut circle radiusTypeSeat back heightArmrestsFore-aft adjustmentSeat suspensionTypeHydraulic outletsMower cut heightCut height incrementsPreset cut heightTypeCutting widthConstructionMower deck materialMower wash portMower drive systemMower wheelsMower wheel adjustmentMower level adjustmentTypeFront draft armsRear draft armsMower wheels rotateDrive systemMeets ANSI standardMeets OPEI standardBackup protectionSafety videoNotesWarrantyMowersRear baggerPowered material collectionMulching systemFront thatcherFront bladeMid-mount bladeSnow blowerRotary broomRotary tillerSleeve hitch3-point hitchRear power take-off (PTO)Plow, moldboardBox scraperCultivatorRear bladeDisk harrowLandscape rakeSprayerSpreaderFront bumperBrush guardWeather protectionSun canopyRear receiver hitchBucket holderGrass stripingTractor shovelFront loaderOther equipmentTow-behind toolsHeightOverall lengthWheelbaseWidth with mowerWidth with mower (deflector raised for storage)Width without mowerWeight

22 hp16.4 kW

No-tools oil drain hose with replaceable filter

44J6 Cyclonic

K46 hydrostatic integrated with transaxle

Twin Touch™ pedals

20×10-8

Foot pedal with adjustable spring assist

Accel Deep™ mower deck, 48 in.122 cm

4 year/300 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

22 hp16.4 kW

44.2 cu in.724 cc

44J6 Cyclonic

Overhead valve, full-pressure lube, oil filter

V-twin, cast-iron liners

Mechanical

Separate levers, automatic choke return

Air

Dry, replaceable

No-tools oil drain hose with replaceable filter

Gasoline

Pulse pump, carburetor

Gauge on dash

Rear

On left fender, 3 in.7.6 cm

3.3 U.S. gal.12.5 L

12 V340 CCA

Flywheel alternator, regulated, 14 amp

Bendix

Yes

Two standard, incandescent, 27 W

Optional

K46 hydrostatic integrated with transaxle

Twin Touch™ pedals

Yes, button on dash

Fins and fan on transaxle

Internal, not replaceable

0-5.5 mph0-8.9 km/h

0-4 mph0-6.4 km/h

Internal wet disc

Welded heavy-duty

E-coat/powder

Standard rear, optional front

Cast iron front axle, front wheel ball bearings

15×6-6

20×10-8

Fully enclosed, molded-in color material reduces sound, will not rust or dent

Stamped steel

Sure-grip rubber

Yes, under seat and covered toolbox

Yes

Yes, heavy duty

600 lb272 kg

Manual, sector and pinion

Not available on this model

Large, 14 in.35.6 cm

16 in.40.6 cm

21 in.53.3 cm

Open-back design with grasp

15 in.38 cm

While seated, slide rail, 15-position, 6.6 in.17 cm

Tilt, two coil springs, three-position no-tools adjustment for operator weight

Foot pedal with adjustable spring assist

13 positions, 1-4 in.2.5-10.2 cm

0.25 in.0.64 cm

Yes

Side discharge

Accel Deep™ mower deck, 48 in.122 cm

Stamped steel deck shell

10 gauge0.135 in.3.4 mm

Yes

Electric power take-off (PTO) clutch, in-line belt

Four

Seven-position, spring-loaded pin

Exact Adjust ports and onboard deck-leveling gauge

Roll under tractor

Attached with spring pins at two points

Quick-pull pins

Yes, 90 degrees for easy mower removal

Dual belt

Yes

Reverse Implement Option (RIO)

Yes

Fully enclosed, molded-in color material reduces sound, will not rust or dentDurable E-coat primer and powder-paint finish

48A (standard)

2-bag, 7 bu247 L

Power Flow™ blower

Yes, MulchControl™

38, 46, 54 in.96.5, 116.8, 137.2 cm

44 in.111.8 cm

Two-stage, 44 in.111.8 cm

Tow-behind, 15 U.S. gal.56.8 LTow-behind, 25 U.S. gal.94.6 LMounted, 25 U.S. gal.

Tow-behind, 125 lb57.7 kgTow-behind, 175 lb79.4 kgMounted 125 lb

Styled bumper option

Yes

Weather enclosure

Yes

Yes, double bucket

Lawn striping kit

40 in.101.6 cm

46.1 in.1171 mm

71.5 in.1817 mm

49.4 in.1255 mm

62.6 in.1590 mm

52.6 in.1335 mm

38 in.964 mm

Mower, no fuel: 606 lb275 kg

.9% APR fixed rate for 48 months 1

on New John Deere X300 Select Series Lawn Tractors

1.9% APR fixed rate for 48 months 1 OR
4.9% APR fixed rate for 60 months 2 OR
No Interest if Paid in Full within 9 Months 3
Offers available 02 May 2023 through 31 July 2023

Buy Online for Free Delivery 1

on Residential Lawn Tractors

Only valid for purchases made through Buy Online.
May be combined with other promotions.
Offer available 02 May 2023 through 31 October 2023.

1 Offer valid on qualifying purchases made 02 May 2023 through 31 July 2023. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 1.9% APR is for 48 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 23.0% APR (as of 01 May 2023). Available at participating U.S. dealers. and models may vary by dealer. Offer available on new equipment and in the U.S. only. and savings in U.S. dollars.

2 Offer valid on qualifying purchases made 02 May 2023 through 31 July 2023. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 4.9% APR is for 60 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 23.0% APR (as of 01 May 2023). Available at participating U.S. dealers. and models may vary by dealer. Offer available on new equipment and in the U.S. only. and savings in U.S. dollars.

3 Offer valid on qualifying purchases made 02 May 2023 through 31 July 2023. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. Interest will be charged to your account from the purchase date at 17.90% APR if the purchase balance is not paid in full within 9 months or if your account is otherwise in default. Available at participating U.S. dealers. and models may vary by dealer. Offer available on new equipment and in the U.S. only. and savings in U.S. dollars.

1 Free Delivery offer is available on the following new products when purchased directly through the John Deere Buy Online site from participating John Deere dealers in the United States between 02 May 2023 through 31 Oct 2023: 100 Series Lawn Tractors; 200 Series Lawn Tractors; Select Series™ X300 Lawn Tractors; Select Series™ X500 Lawn Tractors; X700 Signature Series Tractors; Z300, Z500, and Z700 Zero-Turn Mowers; Commercial Walk-Behind Mowers; 600 Series QuikTrak™ Stand-On Mowers; Z900 Series ZTrak™ Zero-Turn Mowers; Gator™ Utility Vehicles; and 1, 2, 3, and 4 Series Compact Tractors. Delivery not available from all dealers. See the ‘Select a Dealer’ screen to find a participating dealer in your area. Valid in the U.S. only.

Utility Cart, 7P Poly. LP21935

7P Poly Utility Cart

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

7P Poly Utility Cart

Compression molding process allows polyethylene to be the optimum thickness in all areas for superior strength and durability.

0.75-in. (2-cm) x 2-in. (5-cm) stake s are molded in to make the addition of side extensions easy.

Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.

Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.

Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.

7P Utility Cart wheel

Wheels are mounted on a solid, one-piece axle for durability.

Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

BALLAST BOX COMPARISON AND WHY CAN’T THEY DO BETTER?

The pneumatic tires offer the following:

Sloped tailgate

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch

A large-diameter hitch pin provides plenty of strength:

Fast, easy attachment to the tractor hitch
Spring pin to ensure the pin stays in place

Tilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m 3 )	High-density polyethylene (HDPE)	450 lb (204 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m 3 )	HDPE	300 lb (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m 3 )	Polypropylene	650 lb (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m 3 )	Polypropylene	1,000 lb (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m 3 )	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb (454 kg)	X700 Series

HDPE is compression molded for optimum thickness in all areas and maximum durability.

Sources:

https://agriculture.papemachinery.com/blog/know-your-ballast-options
https://rands.com/Lawn-and-Garden-Equipment/Riding-Lawn-Mowers/100-Series-Lawn-Tractors/s120-lawn-tractor
https://www.gardenersworld.com/reviews/lawn-care/best-cordless-lawn-mowers/
https://heritagetractor.com/X300-Series-Lawn-Mower/x330-lawn-tractor-48-in