Mini circular saw for cutting porcelain stoneware

Power and performance

  • power. 450 W. the optimal indicator for a tool in this price category;
  • 6000 rpm is enough to quickly cut the maximum possible material thickness;
  • the seat of the disk is 10 mm, which is a standard parameter for such modifications;
  • the weight of the device is 2 kg, so it is convenient to hold it even with one hand.

Specifications Mini circular saw Einhell TC-CS 860 Kit

Mini circular saw Einhell TC-CS 860 Kit

mini, circular, cutting, porcelain, stoneware

  • Invalid phone number format!
  • Message sent successfully

Specialization and opportunities

With the help of a power tool, it is convenient to carry out carpentry and repair work. It will help you cut through materials such as wood, tiles, plastic and laminate. The maximum immersion depth is 23 mm, which is sufficient for processing thick chipboard or OSB boards.

On the left side there is a saw depth limiter, as well as a blocking of the lowering of the cutting part in relation to the sole. Thanks to these settings, you can precisely control the immersion of the knife in the blade.

Protective functions

When the load is exceeded, a locking mechanism is triggered, which blocks further rotation of the disk. To continue working, you must restart the saw with the reset button. This function will help to avoid the failure of important parts and eliminate jamming of the blade.

Description Mini circular saw Einhell TC-CS 860 Kit

The Einhell TC-CS 860 Kit is a hand-held circular saw for use in the home workshop. Simplicity of settings and a minimal set of control buttons make the model easy to learn. even a beginner can use it. The saw features high build quality and reliable internal parts, most of which are made of special durable metal.

Equipment

There is a plastic case for storing the saw, which contains the following additional components:

  • three discs. with 20 teeth for wood and plastic, with 80 for hard wood, as well as one diamond disc designed for cutting ceramic tiles;
  • parallel metal stop;
  • a branch pipe for mounting a vacuum cleaner;
  • two hexagons for installing and removing discs.

Einhel TC-CS 860 Kit will be an excellent assistant to the carpenter and home craftsman, providing a smooth, neat cut and easy maintenance. The affordable price of a power tool, its ergonomics and equipment make the model popular and in demand.

Tool capabilities.

The main purpose of the rotorizer is to cut material to a shallow depth. It is not designed for sawing on an industrial scale and does not replace, but complements the basic tool, taking from it a number of possibilities when working with ceramics, metal, wood and plastic.

The rotoriser is not as dangerous as a small angle grinder. The circle is smaller, 85 against 125 mm, and the rpm is below 4000-6000 against 10500-11000.
Its weight, like that of Rostec MP 4012 from 1.3 kg, is 2-4 times lighter than any circular saw, and thanks to a closed casing and an organized dust extraction system, it is used for dust-free work in operated premises.
The tool is much more productive than a hand saw; more compact than a manual electric cutter; more accurate than a jigsaw and can cut into the surface anywhere, not just from the end.

With an adjustable cutting depth from 0 to 27 mm, like the Sturm CS5045MS, it is convenient to cut chipboard sheets with a thickness of 10, 16, 18, 22, 25 mm (except 28 mm); to obtain rectangular and curly holes with large radii of curvature in drywall (its thickness is 6, 9.5, 12 and 15 mm). The rotoriser easily cuts wood, metal, carpets. It is convenient for them to cut multilayer materials; due to low revolutions, cutting of a sheet of corrugated board with a thickness of 0.4-0.6 mm takes place without tanning and burning of the protective layer. With a diamond-coated disc, you can remove old glue in the seams between tiles, and with wood accessories, you can get cuts for grooving with further refinement with a chisel.

Rotaryizer multifunctional saw Stern RR-55A

Technical characteristics of rotorizers.

The rotation of the tooling occurs from 3400 to 6000 rpm, with electric motor power in the range from 400 watts, as on BP 4012 Steel, to 970 watts on Monolith MPR 1-970. This power is enough to overcome the resistance of the material to discs, two main standards, with a diameter of 54.8 and 85 mm with a landing size of 11.1 and 10 mm and a thickness of 0.8-1.2 mm.

Some models of multifunctional rotary saws come with 3-4 saw blades for different materials.
Tooling for wood, laminate, chipboard and aluminum has from 18 to 28 teeth with victorious solders. Cutting speed, from practice: for hardboard about 1-1.5 cm per second, and thick plywood 0.4-0.5 cm / s.

For plastic and hard wood, there are no solders on the HSS wheel, but there are more teeth, from 60 to 80. It can also cut slate at a speed of 0.8-1.5 cm / sec. The largest immersion depth is 28.5 mm, with an outer diameter of 89 mm for the Status CP90U, for other models 27 mm.

Discs for ceramics for rotaryizers, unlike angle grinders, are not segmented and turbocharged, but only with a solid edge and surface diamond dusting for cutting tiles. The cutting speed of 1 cm, especially of porcelain stoneware, is the lowest from 3 to 10 seconds, and the cutting resource of an inexpensive consumable is up to 10 meters.

Rotoriser mini saw Steel BP 4012

Diamond saw blade for mini saw rotoriser 50x10x1,8

Rotoriser with guide rail Einhell TC-CS 860/1 Kit

Rotoriser mini saw Einhell Classic TC-CS 860

Powerful engraver multitool Titan BBM5589

Mini circular saw for cutting porcelain stoneware

SCOPE AND PURPOSE

Mini hand saw for straight cuts in wood, aluminum, plastic and untreated steel.

ATTENTION! This tool is intended for household use only. Tools used for business or professional purposes are not covered by the warranty.

GENERAL PRECAUTIONS

ATTENTION! Observe the following safety guidelines to prevent fire, electric shock, and personal injury when operating a power tool!

Workplace safety:

Keep your work area clean. Clutter or unlit areas of the workplace can lead to accidents.

Do not operate this power tool in an explosive environment with flammable liquids, flammable gases, or dust. During operation, and when turned on and off, the tool generates sparks which can ignite dust or vapors.

Keep children and bystanders away from your work area while operating a power tool. Distraction may cause you to lose control of the power tool.

Electrical safety:

Power tool plugs must match the outlet. Do not modify the plug in any way. Do not use adapter plugs for power tools with protective earthing. Unmodified plugs and matching receptacles reduce risk of electric shock.

Take necessary precautions against electric shock. Avoid contact of the tool body with grounded surfaces such as pipes, heating, refrigerators.

Protect the power tool from rain and moisture. Water entering a power tool increases the risk of electric shock.

Do not use the cord for anything other than its intended purpose, for example, to transport or suspend power tools, or to pull the plug from a power outlet. Protect the cord from heat, oil, sharp edges, or moving parts of the power tool. Damaged or tangled cord increases the risk of electric shock.

When working outdoors, use an appropriate extension cord. Use only an extension cord that is suitable for outdoor use.

Read more:  How to Cut a Triangle on a Circular

If it is unavoidable to use the power tool in a damp environment, install a residual current circuit breaker. The use of a residual current differential switch reduces the risk of electric shock.

Personal safety:

Be careful what you are doing and start working with the power tool wisely. Do not operate a power tool when you are tired or under the influence of drugs, alcohol or medication. One moment of inattention when operating a power tool can result in serious injury.

Wear personal protective equipment and always wear safety glasses. The use of personal protective equipment such as a face shield, non-slip footwear, a protective helmet or hearing protection, depending on the type of operation of the power tool, reduces the risk of injury.

Prevent starting the power tool unintentionally. Make sure the power tool is switched off before connecting the power tool to the power supply and / or to the battery. Do not hold the connected tool by the switch.

Remove installation tool or wrenches before turning on power tool. A tool or wrench in a rotating part of the power tool can cause injury.

Do not assume an unnatural body position. Always take a stable position and always keep your balance. This allows you to better control the power tool in unexpected situations. Wear suitable work clothing. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts.

Loose clothing, jewelry or long hair may be caught in rotating parts.

If it is possible to install dust extraction and dust collection devices, check their connection and correct use. Using a dust extractor can reduce dust hazards.

In the event of a loss of power or other inadvertent shutdown of the power tool, immediately turn the power switch to the OFF position and disconnect the plug from the outlet. If the machine remains switched on during a power outage, it will spontaneously operate when power is restored, which may result in bodily injury and / or material damage.

Careful and Correct Handling and Use of Power Tools:

Do not overload the power tool. Use the specified power tool for your work. With the right power tool, you perform better and more reliably in the specified power range.

Do not operate a power tool with a defective switch. A power tool that cannot be turned on or off is dangerous and must be repaired.

Unplug the power plug and / or remove the battery before setting up the power tool, changing accessories or stopping work. This safety precaution prevents the power tool from being switched on unintentionally.

Store idle power tools out of the reach of children. Do not allow persons unfamiliar with the power tool or reading these instructions to use the power tool. Power tools are dangerous in the hands of inexperienced persons.

Take good care of your power tool. Check that the moving parts of the power tool are working and running, and that there is no breakage or damage that would adversely affect the function of the power tool. Damaged parts must be repaired before using the power tool. Poor maintenance of power tools is the cause of a large number of accidents.

Keep the cutting tool sharpened and clean. Carefully groomed cutting tools with sharp cutting edges are less likely to jam and are easier to guide.

Use power tools, accessories, tools, etc. in accordance with these instructions. Take into account the working conditions and the work to be performed. Use of power tools for unauthorized work may result in a hazardous situation.

When not in use, the tool must be stored in a dry, closed place out of the reach of children! Do not allow the use of the tool by persons who have not read this manual.

Service:

Repair the device only at service centers! Have your power tool repaired only by qualified personnel and only with original spare parts. This ensures the reliability and safety of the power tool.

ATTENTION! The use of any accessory or attachment, or performance of any operation other than those recommended in this manual, may result in injury or damage to the instrument.

How To Convert Milwaukee M12 Mini Cut-Off Tool Into A Mini Circular Saw

Double insulation:

Your instrument is double insulated. This means that all external metal parts are electrically isolated from live parts. This is done by placing additional isolation barriers between electrical and mechanical parts, making grounding of the tool unnecessary.

ATTENTION! The double insulation does not replace the usual precautions required when working with this tool. This insulating system provides additional protection against injury resulting from possible damage to the electrical insulation inside the instrument.

INSTRUCTIONS FOR USE AND SPECIAL SAFETY PRECAUTIONS FOR WORKING WITH THE MINI SAW

ATTENTION! It is forbidden to expose the mini. saw exposed to moisture and atmospheric precipitation.

Be sure to disconnect the plug from the wall outlet before adjusting or changing accessories.

Always keep the power cord a safe distance from moving parts of the power tool.

Avoid unintentional starting. Always unplug the power cord from the wall outlet before performing any maintenance on the instrument or replacing a blade.

Do not leave the tool in the switched on state without control and in stand-alone mode.

Always check the tool for damage. If you find damaged parts, replace them immediately. Before starting, make sure that the moving parts of the tool are not jammed, check their alignment.

If the motor is jammed, immediately turn off the tool and unplug the power cord from the wall outlet.

Never try to slow down the saw blade by applying force to the side wall of the blade.

Do not block the saw blade guard or block it with sawdust. If this happens, stop the tool, unplug it and thoroughly clean the jammed protective cover.

Do not place the power tool on any surface until all moving parts of the power tool come to a complete stop.

Remove nails and other metal objects from the workpieces before cutting them.

Use clamping devices to secure the workpiece.

Keep your hands at a safe distance from the workpiece.

This tool is not allowed to be used for tasks requiring the use of water.

Do not use HSS saw blades for sawing wood or plastics (hardened or carbide tooth preferred).

Do not use bent, deformed or otherwise damaged saw blades.

Use only discs recommended by the manufacturer for this model.

Always wear protective gloves when working with the mini saw and changing accessories.

Always observe the direction of flow. Feed the workpiece onto the saw blade only in the opposite direction to the direction of rotation of the blade.

Never use the cut-off wheel for side grinding.

Use only extension cords rated for the power input of the tool. Minimum wire size. 1.5 mm2. When using an extension cord on a spool, completely unwind the wire from the spool.

INSTALLATION, ASSEMBLY, ADJUSTMENT AND ADJUSTMENT

Cutting height adjustment.

Loosen the cutting depth adjusting screw.

Adjust the cutting depth according to the scale and tighten the adjusting screw

For wood and plastics, the cutting depth should be slightly higher than the cutting height. Installing / changing saw blade.

ATTENTION! Disconnect the power plug from the outlet before servicing and adjusting the power tool. Wear protective gloves when installing the saw blade. Touching the saw blade can cause injury.

Read more:  Kit For Converting A Tiller Into A Mini Tractor

Place the power tool on the end face of the motor housing to change the blade.

Lock the spindle with the lock button located on the tool body.

With the special wrench supplied, unscrew the clamping screw, remove the screw and the outer flange holding the disc.

Raise the lower guard and change the disc.

Place the saw blade on the inner flange. The cutting direction of the teeth (direction of the arrow on the saw blade) must match the direction of rotation arrow on the guard.

Tighten the clamping screw with a hex wrench.

Installing / changing the dust container for the vacuum cleaner.

This tool has the ability to connect a dust collector attachment for clean work.

Place the tool on the front side.

Connect the hose to the fitting. Connect the vacuum cleaner hose to the other end of the hose.

Before using the mini saw, turn on the vacuum cleaner.

The tool is ready for clean work.

Using the laser pointer.

The use of the laser pointer makes it easier to cut in a straight line. Press the laser enable key to turn on the pointer.

Overload protection.

This tool is equipped with overload protection. Overload indicator displays the working status of the tool.

The indicator light flashes, the tool is approaching full load, reduce the force applied to the power tool

The indicator is on continuously, the tool is overloaded. Switch off the power tool and allow it to cool down before using it again.

Recommendations for working with a mini saw.

Always choose the correct blade for the material you are going to cut. Make sure the blade is sharp and in working order.

For best results when cutting wood, metal, plastic, choose a depth of cut greater than the thickness of the material.

When cutting wood or plastic, the cutting depth can be adjusted to the exact size of the material to avoid damage to the bottom surface.

When using this tool, the lumber to be processed is between the base plate and the surface under the lumber. The saw blade cuts into the material and allows you to cut it quickly and safely, leaving clean edges.

Place the workpiece you want to saw on a work table, workbench, or any other suitable surface and secure the workpiece with a vise. Place enough waste material under the workpiece to avoid damaging the work table surface and saw blade when cutting.

If the saw becomes too hot, run it without load for 2-3 minutes to cool the motor.

This instrument is equipped with a laser pointer. The laser pointer is powered by two GPA76 batteries. If the laser stops working, replace the batteries.

ATTENTION! Disposal of batteries must be carried out without causing environmental damage to the environment, in accordance with the rules and regulations in force on the territory of the Russian Federation.

OPERATION OF THE TOOL

On / Off.

The tool is switched on and off by moving the switch key to the appropriate position. When working with the tool for a long time, it is necessary to fix the power key by holding down the fix key. Allow the tool to reach the maximum set speed before starting work. Move the saw blade out of contact with the work surface before disconnecting the tool.

Cutting along the mowing line.

The use of an indicator on the front of the base makes it easier to cut straight mowing lines.

Slope cutting.

Sometimes it is not possible to cut high hard material slopes. Adjust the cutting depth, connect the device to the power source and place the base on the product. Make sure the additional depth settings are the same for all notches. Switch on the appliance and wait a couple of seconds until the saw blade reaches working speed. Then slowly, applying slight pressure on the device, insert the disc into the surface of the product. Move the device forward while cutting the piece. Never move the unit backwards while the disc is in the product. When you reach the end of the product, turn off the saw and remove it from the product.

MAINTENANCE, DIAGNOSIS AND REPAIR

The mini saw does not need any special maintenance.

For a long tool life, follow the instructions for use, cleaning and storage.

The tool is designed for long-term operation with minimal maintenance. Uptime depends on proper care and regular cleaning.

Keep ventilation openings clean. If the saw gets dirty, wipe it off with a damp cloth. Do not use products containing chlorine, gasoline, or solvents, as they damage the plastic of the instrument body. After cleaning, wipe the instrument with a dry cloth.

All repair work on the tool must be carried out by a qualified technician of an authorized service center using original spare parts.

The use of saw blades with irregular geometry can reduce the efficiency of the tool and cause malfunctions in the motor. Replace saw blades in time.

Check all fasteners, screws on the tool body regularly to make sure they are tight. If screws are lost, replace them immediately with new ones. Failure to do so may result in a serious hazard during use. Cleaning. Wipe the body of the instrument regularly with a soft cloth, if possible after each use. Keep the ventilation openings free from dirt and dust. If the dirt cannot be removed, wipe the instrument with a soft cloth dampened with soapy water. Do not use solvents such as benzine, alcohol, ammonia water, etc. These solvents can damage plastic parts.

STORAGE AND TRANSPORTATION

The instrument should be stored at room temperature, in a dry place, out of the reach of children and pets. Transportation is recommended in the manufacturer’s packaging.

STORAGE LIFE, SERVICE. RESOURCE AND DISPOSAL

The shelf life of the product is 10 (ten) years if the storage conditions specified in this operating manual are observed. The shelf life is calculated from the date of manufacture of the product. At the end of this period, regardless of the technical condition of the product, storage should be stopped and a decision should be made to check the technical condition of the product, send it for repair or disposal, and establish a new storage period. The date of manufacture is indicated on the label of the instrument. The service life of the product is 5 (five) years if the storage conditions and operating rules are observed, as well as the correct assembly and installation of the tool specified in this operating manual. The service life is calculated from the date of sale of the product. At the end of the service life or after reaching the designated resource, the tool should not be used and must be disposed of without causing environmental damage to the environment, in accordance with the rules and regulations in force on the territory of the Russian Federation”

Disposal of the tool and component parts consists in its complete disassembly and subsequent sorting by types of materials and substances, for subsequent remelting or use in recycling. This tool and component parts are made of materials and substances that are safe for the environment and human health. However, in order to prevent a negative impact on the environment, at the end of the use of the tool (expiration of its service life) or its unsuitability for further use, the tool must be handed over to collection points for the processing of scrap metal and plastics.

Read more:  How to Sharpen a Circular Saw Disk

Classification by purpose

  • for longitudinal cutting of wood;
  • for cross-cutting wood;
  • for cutting laminate and other board materials;
  • for cutting non-ferrous metals.

Circular saws (circular)

Power: 1400 W

Max depth of cut at an angle of 90 °: 40 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 12200 rpm

Power: 1600 W

Max depth of cut at an angle of 90 °: 65 mm

Portable Wet Saw For Tile

Soft start: no

Maintaining constant speed under load: yes

Speed: 4700 rpm

  • One of the fastest saws in its class. 5800 rpm

Power: 1600 W

Max depth of cut at an angle of 90 °: 64 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5800 rpm

Power: 1400 W

Max depth of cut at an angle of 90 °: 55 mm

Soft start: no

Maintaining constant speed under load: yes

Speed: 4700 rpm

Power: 1200 W

Max depth of cut at an angle of 90 °: 65 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

  • Tilt adjustment scale and rip fence for best results

Power: 1200W

Max depth of cut at an angle of 90 °: 62 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

  • Parallel guide for precise cuts without pre-marking

Power: 1200 W

Max depth of cut at an angle of 90 °: 65 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

  • Precise cut: there is a laser pointer and the ability to work with a guide

Power: 1600 W

Max depth of cut at an angle of 90 °: 66 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

Power: 1500 W

Max depth of cut at an angle of 90 °: 65 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

  • Double flange for mounting discs with bore diameters of 20 and 30 mm

Power: 1600 W

Max depth of cut at an angle of 90 °: 65 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5500 rpm

Power: 1800 W

Max depth of cut at an angle of 90 °: 73 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

  • Laser pointer for precise cutting

Power: 1600 W

Max depth of cut at an angle of 90 °: 66 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

Power: 1200 W

Max depth of cut at an angle of 90 °: 65 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5500 rpm

  • Parallel fence included. no need to select separately!

Power: 1400 W

Max depth of cut at an angle of 90 °: 66 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

Power: 1800 W

Max depth of cut at an angle of 90 °: 68 mm

Speed: 5500 rpm

Power: 1300 W

Max depth of cut at an angle of 90 °: 55 mm

Soft start: yes

Maintaining constant speed under load: yes

Speed: 2000-5000 rpm

  • Possible to work with a guide

Power: 1400 W

Max depth of cut at an angle of 90 °: 66 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

  • Easy to achieve precision: there is a laser pointer and a guide rail

Power: 1600 W

Max depth of cut at an angle of 90 °: 66 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

  • Cutting depth of 66 mm and a clean cut thanks to the TST 24T disc

Power: 1600 W

Max depth of cut at an angle of 90 °: 66 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 5000 rpm

Power: 1300 W

Max depth of cut at an angle of 90 °: 40 mm

Soft start: no

Maintaining constant speed under load: no

Speed: 13800 rpm

Circular (circular saws). hand tools for precise rip and cross cuts in wood and metal. They are a steel disc, on the surface of which cutting teeth are applied around the circumference.

In terms of cutting depth, it can be one of four types

  • small with a cutting depth of 40-46 mm;
  • average. 50-55 mm;
  • big. 65-70 mm;
  • professional grade. 65-140 mm.

The first two types are hand-held circular saws. They are more maneuverable and lighter, which means they are more comfortable. They have less power and, accordingly, less performance. The third type already belongs more to the professional class than to the household one. A circular saw for wood is used for ripping or cross-cutting wood. over, depending on the purpose, it can have canvases of different designs.

Among circular saws, hand-held ones are the most common. The primary and most important parameter is the maximum cutting depth. But do not rush to make a choice. From several models with the same maximum cutting depth, you should choose the one that is most suitable for your tasks in terms of a number of parameters, the main of which is the power of the electric motor.

The circular saw has another important parameter. the rotational speed of the blade. The larger it is, the easier it is to cut hard materials. Such a saw has better control, having a ball-shaped handle that allows you to fix the saw in almost any position.

Here you can choose a stationary table saw or a hand-held circular saw. Together with professional managers, you will find your real tool and optimally spend your money.

Mini circular with flexible shaft FDB Maschinen DB18

Table circular saw Sturm CS5020TB

Circular table saw Scheppach HS80

Stops and guides for more precision cutting.

In the simplest desktop home circulars, the longitudinal stop is a lightweight aluminum profile along which the board moves, or if the width of the workpiece is less than 120 mm, it is pushed by the pusher.
Its use allows you to obtain without marking, at a given distance, the required number of parts.
The longitudinal stop must be rigid and massive, and the method of fixing it must ensure the cut as smoothly as possible, without deviations, to the very end of the workpiece.
On stationary models, it is not clamped by a threaded connection with thumbs at the edge of the table, but by eccentric pivoting levers to separately installed rails.

Teflon pads installed on the sidewalls contribute to better sliding and prevent the formation of dark marks from contact with aluminum.

A rotary stop with protractor, graduation scale and clamping clip is needed for cross-cutting. It is installed in a special groove on the surface of the table and, having fixed the required angle, into it, or a bar screwed to it, abut the workpiece and hold it with your hands, direct it towards the saw blade. The stop slides smoothly and without jamming along the groove.

Wood circular for home desktop JET JTS-8

Circular saw for wood Zipper ZI-FKS315

Table saw Einhell TC-TS 1200