Proper balancing a trimmer for grass on a belt. How to put a motorcycle on a ranging system correctly

A belt for a trimmer for grass from China. characteristic and design of the product, price, video

Working a trimmer is much more convenient and easier to use a special belt. Thanks to him, the operator can mow large sections of grass without pain in joints and muscles for several hours in a row. The design of the biceps belt is designed so that the lawn mower is kept using the mounts itself. without the help of hands. She will only need to set the direction, and she will do everything else herself. About how to correctly attach a belt to a trimmer and set it up for yourself to facilitate the load, and it will be discussed in this material.

The exploitation of braids for grass is quite complicated without a number of additional accessories, including the cutting headset, as well as a shoulder belt and a casing that protects the operator’s legs from stones and herbs. Each of these devices plays an important role in the configuration of a trimmer for grass, so special attention should be paid to the study of their characteristics and choice.

Classification of the headset for trimming

Owners of local areas often use different knives and discs to care for the territory. Their main function. fight large weeds and old dried bushes. In most cases, manufacturers use the following materials for the manufacture of knives:

The knives of the trimmer for grass also differ in the type of cutting edges. The headset can have 4.8 or more teeth that are at the same height or one above the other. In addition, the blades have a carbide.melting tip or with holes inside the teeth.

The cutting set can also be made in the form of several blades or to have the shape of a solid disk to which strong metal teeth are attached.

The choice of a knife depending on the conditions of use

When choosing a cutting headset, you should pay attention to the material from which it is made. As a rule, metal gadgets are used to combat especially large weeds. However, plastic knives can handle most wild plants. In addition, the plastic has much less weight and greater elasticity, and the blades and discs of the trimmer for the grass create a lower load on the engine and the drive tool.

Assembly of a cultivator

If there is a cottage or just a land plot, then the cultivator will help facilitate soil processing. Traditionally, a chopper is used for these purposes, but working with it takes a lot of time and effort. The use of the cultivator will reduce labor costs, and the whole process will take a smaller time period. Factory.made equipment is expensive, therefore, with limited funds, the question arises about the independent assembly of the cultivator. For this, both gasoline trimmers for grass and electric cos are suitable for this.

To create a simple sample of technology, you should stock up on such tools and materials:

  • corner grinder with a set of disks (suitable diameter. 125 mm) for metal;
  • drill with drills of various diameters;
  • welding apparatus;
  • electrodes;
  • an electrician or a hacksaw for metal;
  • An emery machine with two abrasive circles of different granularity;
  • functioning gasoline trimmer;
  • forks;
  • pipe made of steel suitable in diameter for the shaft of motorcycles;
  • manual tools: keys, hammer, pliers, core, roulette and marker;
  • a sheet of metal with a thickness of 3 to 5 mm and a minimum of 1010 cm.

The manufacturing process begins with the working part. For this purpose, the curved rods of garden foriles will serve. Their recommended length is from 10 to 15 cm. this is enough to carry out loosening the soil.

The working nozzle is made in the following sequence:

  • The teeth of the forks are flattened to a width of 1 cm;
  • on the sandpaper, using a circle with a small abrasive, cutting cutters;
  • Using an electrician, a circle with a diameter of 10 cm is cut out of the metal;
  • process it on the emery machine until it reaches an almost perfect form;
  • At equal intervals, prepared mills are welded to the metal circle (recommended quantity. 3).

This is really a completely indestructible fishing line for a trimmer for a lawn mower.

With more than 3 pieces, the number of mills, the load on the equipment increases greatly.

The recommended power of the gasoline engine should be two horsepower (about 1.5 kW) or more.

At the next stage, it is necessary to attach the cutter for weeding for a trimmer for grass. The process is greatly simplified in the presence of a reverse thread located at the end of the shaft of the motorcycles, on which the manufactured working part is simply wound. To do this, a pipe with a nut is pre.welded to the cutter.

In the presence of locksmith experience and welder skills, redoing a trimmer for grass in a cultivator is quite simple. Financial costs at the same time insignificant. If the work is used in an electric hood, then you will need to think about the extension cord so that it takes out throughout the processed area.

https: // https: // https: // tehnika.Expert/Dlya-Sada/Trimmer/Chto-Mozhno-SDELAT-IZ.NEGO.HTML

Remont-Karbyuratora-Trimmera-Svoimi-Rukami-I recognize my car!

Under such conditions, it is possible to say about violations in the adjustment of the carburetor.

Since quite often saved money when buying a trimmer for grass will be able to turn into the need for frequent repairs or its full replacement with a new unit. It took 2 days to understand the scheme, but the repair itself took only 15 minutes.

Exchange of experience, entertaining and necessary about everything that has their own wheels for those who decided to organize their own business.

The necessary recommendations, needlework and descriptions of self.proofs with a photo of the house is home home, maintaining and life of the household. from choosing and cooking household appliances, to leaving and raising children for pets, a home.made snowman. Trimmers for grass. Lawn mowers.

Bishops and black cutters. Boil repairs with your own hands.

With all the thirst, the chainsaws cannot be attributed to difficult if there is no confidence and experience in their own abilities, the repair of the carburetor computers, the Internet about everything regarding computers, the Internet and office equipment active vacation of the article on travel and tourism, fishing and hunting, amateur sports, about Equipment and equipment for outdoor activities, repairing a carburetor with your own hands requires certain maximum concentration and knowledge.

The most popular malfunctions of a carburetor with a mesh filter of a malfunction carburetor, much more often, two. it either clogs or breaks. In order to determine which of the malfunctions of your carburetor befell, it is necessary to unscrew the fuel filter cover and reach the mesh filter.

Removing the carburetor on the VAZ 2109-2108 The procedure is not complicated enough, and it should immediately bring the list of tools that are useful for the execution of this repair of the carburetor starting device in most cases lies in the pollution: the starting device is washed with acetone or simple gasoline. If possible, it is possible to blow out the starting device with compressed air.

In case of malfunction of the intake pipeline, the carburetor can appear traces of soot near the place with a loose connection, or a narrow fuel film. Understand the places in which fuel leaks are going on, perhaps dry, wipe all the places that arouse suspicion.

The tightening of the mounts is to be sent evenly and carefully so that there is no distortion of the carburetor flange. In some cases, tightness disturbances still remain besides at the end of the tightening of the mounting nuts.

In this case, you must clean the place of suction, and replace the gasket in it. If the circumstance of the carburetor malfunction is a breakdown of an accelerating pump, then you will need to come to terms with its replacement. Details of the acceleration pump are not subject to repair.

If the pump is working, it can be washed with gasoline or blow. It is also worth checking how the details and levers of the diaphragm of the pump freely move

��Grass cutting machine works on crispy��/ Бензокоса работает по хрустяшке

Pay special attention to the ball in the spray

Installation and adjustment of fastening of a gasoline trimmer for grass. Backpack belt.

The convenience of use depends not only on the proper placement of a gasoline trimmer for grass on the backyard belt, its equilibrium, and on the correctness of the installation and adjustment of a two.handed handle, often called a bicycle.

Motokos mount adjustment. What to strive for.

After the adjustment of the two.handed handle and the backpack belt, the cutting tool of the lawn mower, which is in the hanging position on the strapping, should be parallel to the ground, the hands should not touch the garden tool with all this. The height, of course, may vary depending on the task performed, 20-30 cm with a mowing of the highest grass for feed, 5-10 cm for cutting lawn grass.

Motokosa should be balanced with the installed cutting equipment: disk or a reel with a fishing line.

Adjusting: Running belt / backpack belt / belt of a backpack type / shoulder belt / parachute belt.

It may be due to the incorrects of the translation, at the moment you can meet a huge number of titles of the belt suspension of garden technology: the rain belt / belt of the RUSSIC / BUICE Type / shoulder belt / parachute belt / parachute belt

For the lawn mower, only a biceps belt is suitable, hence the associations with a satchel and a portfolio, which should be correctly annexed and fitted by the figure. You can naturally hang on one strap garter,belt a loop, but I do not recommend, except for completely low.power models. Weight and vibration will rapidly make themselves felt.

First you need to adjust the height of the hook of the biceps belt in coordination with your own growth. To do this, we put on a parallest belt and pull the shoulder belts so that the hook is below the hips to the width of the palm, and the load is moderately distributed along the straps. If you pull up a trimmer for the grass above, then only narrow the gravity of the grass, and the cutting tool will most likely be at an angle to the ground.

We hang a motorcycle. Reducing the hook into the necessary hole of the bar we balancing the gasoline trimmer for the grass so that the knife when releasing hands is on the chosen, depending on the tasks, height.

On those models, a gas station that are equipped with a loop for fastening, not a bar, you need to carry out balancing, moving it along the bar.

The purpose of such balancing is to disperse the weight of a garden tool through a backpack belt on the shoulders, and not its unchanged support with hands. Hands should only set the direction of the cutting tool.

Then you need to adjust the two.handed handle of a gasoline trimmer for grass. If the balancing of the garden tool is after which it is violated, then you need to repeat all the stages, to the merit of the result.

It does not always come out to get an impeccable balance of the lawn mower on the background belt. From time to time, the parallelism of the knife by the Earth can only be achieved with individual selection of the length and replacement of the standard rod of the trimmer for grass. Do not forget that the center of the masses will still affect the amount of fuel in the Motorics tank. But not even a completely conducted adjustment of the mounting motorcycle can significantly facilitate the work of the operator.

The main malfunctions of the starter of the trimmer for grass

It is not difficult to determine the cause of the breakdown of the starting device. There are several main options:

These details are shown in the photo below.

It may happen that the starting mechanism will be accidentally broken. The consequences will turn out to be deplorable if the ragged rope is wound around the flywheel of a working internal combustion engine: then the spring bursts, the pulley will tear off. But such cases when a complete replacement of the starting node is required, they rarely occur. In most cases, to fix the mechanism, it is enough to put a new spring or replace the cord.

How to adjust the mounts of motorcycles. Running belt

The comfort of the gardener and, as a result, the speed and duration of its work depends on the correctness of the mounting of the motorcycle belt. Many do not want to waste time adjusting the fasteners of a gasoline trimmer for grass on a biceps belt, and it may be justified if you need to crush the grass only on a small section or near the fence, but with huge areas the issue of convenience and endurance will become the main ones if we do not want to stretch the mowing for a certain number of days. In addition, the correctly adjusted attachment of the lawn mower will make it much safer to mowing grass. As for me, then you should figure out this issue.

How to use a trimmer correctly

Garden trimmers for grass are effective. Newchers think that it is easy to work with a lawn mower, because you just need to include it in a socket or pour fuel, but this is not entirely like that.

The efficiency of the garden tool and its service life directly depend on operating conditions. Therefore, before using a trimmer for grass, you need to perform preparatory work.

The lawn with which you need to mow the grass is carefully examined. Be sure to remove glass and large stones. Having flew out from under a working mower, they can injure a person. They remove the wire from the lawn, because it can be wound on a rotating element, break a mower.

After that they move to the installation of the cutting system. There are trimmers for low.power grass on sale, which use only a fishing line for a trimmer. It is designed for mowing juicy and soft grass. But there are models with a capacity of more than 1 kilowatts on which metal knives are installed. They cut sowing and other hard weeds, trim the young shrub.

In order to replace the cord with knives, you need to unscrew the mounting nut, install the cutting element. Then the nut must be returned to the place, tighten it with the key.

The operator must take care of his safety. Mow grass in tight protective clothes. Special glasses are used to protect the eyes, they will protect from dust, grass and flying garbage. Hands are covered with gloves.

The electric trimmer for the grass is included in the network, and the battery models are charged for several hours before starting operation. Fuel is poured into a gasoline mower.

The mower is kept so that the spool or knife is located parallel to the ground. When the tool is installed in the correct position, the motor is included. After the grass is bewildered, the mower is turned off.

How to cut the lawn so that it turns out to be even

So that the grass on the lawn is trimmed evenly, it is necessary to lower the mower as low as possible during operation. The site must be divided into squares. You need to work, moving clockwise. In this case, the hay will always lie on the left without interfering under the feet.

How to wear a belt

If the tool has a shoulder mount, before starting work it hangs on the shoulder. The trimmer for the grass is fixed on both shoulders if it has a backbone mount.

The model with a bicycle handle is held with 2 hands, the D-shaped handle is wrapped in palm. The belt must be worn so that it is convenient, then the back will not get tired.

How to refuel a benzotrimer

Motokos working on gasoline are with two.stroke and four.stroke engines. The first option is much more common. What are the differences between them:

in trimmers with a 2-tact engine, the response to press the inclusion lever is faster (for this reason the lawn mower is mainly equipped with this type of engine); A tool with a two.stroke engine will be much easier, as well as easier to maintain; Fuel consumption in a two-stroke engine is higher than in a 4-stroke with a similar power by about 30%; The 4x-stroke engine is more environmentally friendly, since the fuel in it burns completely and is not thrown into the atmosphere, as well as its noise level is much lower; And the most important distinguishing feature is the refueling: a 2x-stroke engine is equipped with one common tank, where gasoline mixed with butter is poured; 4x-tacte has a separate gas tank and a tank for motor oil.

For refueling, it is necessary to use fresh gasoline AI-92 or AI-95 and high-quality motor oil for garden equipment (for 2x- and 4-tact engines, manufacturers produce different oil). Oil can be used mineral, semi.synthetic or synthetic.

The proportion of gasoline and oil for trimmers with a 2x-tact engine can be found from the instructions for a specific model. Usually it is 50: 1, in some cases, proportions of 25: 1 or 40: 1 are recommended. Prepare the fuel mixture in a separate container with accurate observance of proportions. Never pour the liquids “by eye” directly into the tank without mixing them in advance. Detailed instructions for mixing a benzomalam, with video and description, can be found on our website here.

Installation and adjustment of fastening of a gasoline trimmer for grass. Backpack belt.

The convenience of use depends not only on the proper placement of a gasoline trimmer for grass on the backyard belt, its equilibrium, but also on the correct installation and adjustment of a two.handed handle, often called a bicycle.

Motokos mount adjustment. What to strive for.

After the adjustment of the two.handed handle and the backpack belt, the cutting tool of the lawn mower, which is in the hanging position on the strapping, should be parallel to the ground, the hands should not touch the garden tool. Height, of course, may vary depending on the task performed, 20-30 centimeters with a mowing of high grass for feed, 5-10 centimeters for cutting lawn grass.

Balanced a motorcycle with an installed cutting tool: a disk or a reel with a fishing line.

It is possible due to the inaccuracies of the translation, now you can find many names of the belt suspension of garden technology: the rain belt / belt backpack / belt of a backpack type / shoulder belt / parachute belt. For the lawn mower, only a biceps belt is suitable, hence the associations with a backpack and a satchel, which should be correctly attached and fitted by the figure. You can certainly hang on one strap garter, a belt of a loop, but I do not recommend it, except for very low.power models. Weight and vibration will quickly make themselves felt.

First of all, it is necessary to adjust the height of the hook of the biceps belt in accordance with its height. To do this, we put on the paraphernal belt and pull the shoulder belts so that the hook is below the hips to the width of the palm, and the load is evenly distributed along the straps. If you pull up a trimmer for the grass above, then only narrow the grabbing of the grass, and the cutting tool will most likely be at an angle to the ground.

We hang a motorcycle. Reducing the hook into the desired hole of the bar we balancing the gasoline trimmer for the grass so that the knife when releasing hands is on the chosen, depending on the tasks, height.

On those models of a gas station that are equipped with a loop for fastening, not a bar, it is necessary to carry out balancing, moving it along the bar.

The purpose of such balancing the distribution of the weight of a garden tool through a backpack belt on the shoulders, and not its constant support with hands. Hands should only set the direction of the cutting tool.

Then it is necessary to adjust the two.handed handle of a gasoline trimmer for grass. If the balancing of the garden tool is broken after that, then it is necessary to repeat all the stages, until the result is achieved.

It is not always possible to get the perfect balance of the lawn mower on the backward belt. Sometimes the parallelism of the knife of the Earth can be achieved only with the personal selection of length and replacing the standard rod of the trimmer for grass. Do not forget that the center of gravity will still affect the amount of fuel in the motorized engineering tank. But not even perfectly carried out adjustment of mounting motorcycles can greatly facilitate the work of the operator.

Working with a trimmer

Manufacturers do not recommend working in sandals or barefoot, as this can lead to injuries. Clothes and shoes for working with trimmers should reliably protect the legs from damage.

A special skill is not required when working with a trimmer. just properly hold it by both handles and move evenly along the surface.

a fishing line for a trimmer (usually 1.3-1.6 mm), which refuel trimmers for grass, is a special. Fish fishing line for a trimmer is not suitable for this purpose.

After work, the trimmer for the grass must be cleaned. Clean the ventilation slots regularly cutting fishing line for a trimmer and coil using a soft brush or dry fabric. Using a stupid scraper regularly remove dirt from under the protective casing.

Keep the tool in a warm dry room, protect it from dust and dirt.

Adjust the height of the hook of the smynet belt of the trimmer for the grass with a handle of the shoulder straps so that the trimmer knife lowered to the ground is located parallel to the surface of the site (strictly horizontally). When working with a saw trimmer for the grass, adjust the height of the hook (with a tightening of the shoulder straps) so that the sawy disk of the trimmer for the grass is tilted a little forward relative to the surface of the earth.

Moving the ear for hanging braids for grass on a trimmer belt for the grass forward or backward, equalize the trimmer for the grass so that when the steering wheel is released, the trimmer knife for the grass is near the very surface of the site, but does not go to the grass. For sawing bushes and young trees, a trimmer for the grass with a saw drive of a bureau for the grass should be equalized so that when the steering wheel is released, the car hung on the hook horizontally land.

Adjust the shoulder belts of the trimmer for grass (the straps of the “harness”) so that the load is distributed evenly on the shoulders (check by pressing the handle of the trimmer for the grass on the hook on the hook).

Husqvarna grass trimmer’s video. On the design features of the belt suspension (harness), which facilitate and make a more safe mowing by a motorcycle, a trimmer, a benzocosa, a Husqvarna bush. wide shoulder straps and an elastic belt, quickly unfastened locks (carabiners) in case of fire or any other situation requiring rapid release from a trimmer for grass. On the universality of belts for men and women.

Such Range belts of a trimmer for grass from Husqvarna (Balance 35/55, Balance X, Balance XT) can be used on any trimmers, benzocoses, motorcycles, electric cosecs, and bureaus.

colleagues, who regularly and a much use of gasoline trimmers, tell me how to choose the right length of the shoulder belt and the position of the handle.

I had before, I was electric, light, mowed and did not steam. One trouble, you had to constantly monitor the wire, so that it was not accidentally “mowing”. This year, the electric was jammed at the electric. Took a simple gasoline Chinese. (if anyone interp. Patriot 3045). With a J-shaped handle. Started mowing. on half the site is tired. Both hands are constant in tension. The right is tired stronger, still have to crush the gas. If I do the belt shorter, then I can’t briefly mow the grass. And it turns out that in general I hold a trimmer in my hands on weight. The belt, only saves from jerks (when you accidentally hook the earth, and the trimmer tries to run away for the grass). Twist.For anyone. I just can’t find it so that it is convenient. In general, share cunning how to correctly configure the belt length and handle position.

Operation of a trimmer for grass in raw weather

It is worth immediately making a reservation that the operation of electric trimmers is completely eliminated in the rain, wet and raw weather. This can lead to a short circuit and shock. You can not use an electrical appliance and after the rain, you must wait until the lawn grass is ventilated and dry out. However, with gasoline motorcycles, everything is also not as smooth as we would like. Some well.known manufacturers prohibit the use of their models in the rain, as power units do not have the necessary degree of protection against moisture.

It is also impossible to operate wet equipment. If the braid for the grass was some (albeit short) time in the rain, then it must be brought into a dry place, wiped and give time to dry before starting the launch.

The lawn mower is deprived of some constructive disadvantages of the electrimmer, but not completely insured from failure due to moisture.

Some experts say that gasoline trimmers can be mowed without stopping, even if it is easy to rain. Of course, this is not recommended to do this, because the likelihood of breakdown of various nodes and the engine itself increases. Electric trimmer for grass with the upper location of the engine is less sensitive to moisture, but it is not insured from a jump in the voltage due to the water extension cord of the water. You can limit yourself to the purchase of a new extension cord, but the repair or replacement of the trimmer itself for grass is not cheap pleasure.


With an electric trimmer, everything is much easier. Having made sure that the gearbox has the required amount of lithol, you can start work. No additional measures are required. Unless it is necessary to make sure that the carrying does not run on the path of mowing in order to avoid possible damage.

When the device itself is ready to work, you should make sure that there is nothing around that could interfere with the work. If possible, the estimated mowing area should be cleaned of snags, glass, stones and other solid objects that can damage a knife or fishing line for a trimmer.

It is better if other people do not approach the trimmer while working. Usually the recommended distance is at least 10-15 meters in order to avoid small debris (mulch) in the eye and on the face.

Depending on the upcoming work, you need to choose a nozzle for a trimmer for the grass: a screw-knife for weeds and hay, a fishing line for a trimmer for lawn grass or a disk saw for shrubs. Mowing should be in the opposite direction from people, if possible, moving away from buildings and buildings. You should not get too close to the fence and other designs, since the fishing line for a trimmer can catch on sharp edges, and the screw-knife will bend if it accidentally offends it a hard object.

The preparation of the device itself will not take much time, all modern models of devices are designed to facilitate and simplify their operation, starting to work in the shortest possible time.

How to correctly configure a belt of a lawn mower for yourself

Service centers often complain about consumers of household garden equipment, who still make mistakes at the stage of its assembly and the first launch and disable equipment. Of course, there is an instruction in the package, but either it is stupidly written, or it is read after the wrong assembly, when unnecessary details were found or, worse, a breakdown occurred. Meanwhile, there is nothing complicated in the assembly of household garden equipment. You just need to be careful. Let us give an example the procedure for assembling the Stihl FS 130 lawn mower, complementing our instructions with illustrations.

You need to start the assembly with the fact that open the box and check the package of the unit. If everything is in place, then we have to put the handle to the bar with the motor, put on the belt, attach a protective casing and cutting elements.

First you need to get the handle and unscrew the barbar, which attaches the upper part of the support, without giving up the springs.

We insert the handle into the nest and fix it without tightening it. We adjust the final position after the final assembly of the lawn mower.

We put on the control knob on the handle tube and tighten the mounting bolt. For this, the kit has a universal key.

All controls of the stihl fs 130 gas station are located on the handle. This is: a gas lever that protects against random turned on and the lever of turning off the unit, which is controlled by the thumb. At the modification, motokos with a D-shaped handle are located next to the engine on the bar.

Put a plastic protective casing. If it is planned to use only a knife, then for its operation we use part of the casing (in the picture it is painted with orange).

If the cutting fishing line is working, then a plastic skirt is additionally put on a protective casing and a knife is placed for cutting a fishing line. In some varieties of this model, the casing can be universal or two different casings are attached. one for fishing line and the other for a knife.

Putting the skirt on the casing, you need to check the reliability of its fastening. Sometimes it may be necessary to fix this protection with another screw.

Now you need to put a knife for cutting fishing line and fix it with a screw.

It remains to install the coil, having previously tucked it with a fishing line. The coil is wound on the shaft (as in the illustration) or attached with a special nut. Keep in mind that the thread on the shaft is usually the left. How to refuel a fishing line for a trimmer to a coil read in the instructions.

If a knife is required, then instead of a coil we put it. The knife is equipped with a protective lid so that during operation it does not bury into the soil. After installing it, do not forget to scroll through this cutting element and make sure that there is no backlash.

Well, the last, the easiest, stage. installing a metal clamp on the bar, t.e. suspension belt mounts.

After the lawn mower is assembled, we put on a shoulder belt or a belt parallel suspension (depending on what is given in the kit) and drive them according to the figure. Pour the gasoline mixture, start the engine. and go ahead.

Fresh Комментарии и мнения владельцев

How to clean the pomegranate from the peel correctly. Video Description: In hot and solar Georgia, there is such a custom: if the young man is in love with a girl,

Battery capacity

The battery reserve is measured in a/h. One unit ampere is enough for about 15 minutes of work. For example, in order to cut the lawn around an ordinary house, 2 A/h is enough. If the entire site is 3-4 a/h.

Interskol MKE-20/300

It is considered one of the best in terms of price-quality among electric trimmers. Power 0.3 square meters. Field thickness. 1.6 mm. Made almost completely of light plastic, so the weight is only 1.8 kg. The best option for women.

  • good quality;
  • small weight;
  • affordable price;
  • low noise level (83 dB);
  • high performance when working with fine grass.
  • low.power engine;
  • warms up at large loads;
  • not very comfortable mount.

Well suited for working with the lawn on the site. The tool is light and convenient to use. It is ranging with competent operation rarely. Another advantage is low price.

Carver TR 400T

Electric model with a capacity of 0.3 kV. Equipped mass. 2.2 kg. Field thickness. 1.3 mm. With a good power indicator, it differs relatively high performance and reliability. Budget option for one.time work at a summer cottage.

  • low price;
  • good performance;
  • small weight;
  • reliability.
  • does not cope with large volumes of work;
  • hard to remove the coil;
  • Zausenets are often formed on the fishing line.

We put on a belt

Without a belt, the operation of a trimmer for grass is impossible: it provides redistribution of voltage from hand to shoulders and spine, and helps optimize the return. Put on the belt on the already assembled device when the bar is in the engine’s groove.

The belt itself is attached to a metal loop, which provides dense fixation even at the maximum load. The belt mount design is the same in all models and does not require additional manipulations when installing. It is enough to enter the loop into the above hole. and the fixation will be provided.

proper, balancing, trimmer, grass

Just putting the belt is not enough, you need to debug it for yourself. The belt setup occurs depending on the growth of a person. Make sure that the belt is stretched correctly, you can at work. If the shoulders and arms do not get tired enough in the process of mowing, and vibration does not cause unpleasant sensations in the muscles, then the belt is set correctly. If your hands are quickly tired, you should turn off the device, weaken the belt, and tighten it to your height again. This procedure needs to be carried out until the trimmer for the grass lies exactly “on the arm”, and on the weight the length of its rod will be optimal relative to the surface.

Important: it is not recommended to use a trimmer with a poorly tightened belt, it can be traumatic. Such a belt risks slipping from the shoulder and get under the feet. And hands without redistribution of efforts with a belt get tired much faster.

It is quite easy to adjust the belt length with the help of a loop: for this it is enough to tighten it to reduce the volume, or weaken to increase the length.

trimmer for grass in action

So, the preparatory stage is over, it’s time to start work. Where to start? How to use all the capabilities of the device correctly? Of course, you can simply start work and learn the whole method of trial and error, or adhere to simple, but correct recommendations and get a wonderful effect after the first mowing. There are nuances everywhere, whether it is a haircut of a lawn, a saw of bushes with a disk or a mowing of grass for hay. You should start from the simplest.

How to cut the lawn so that it turns out to be even

The lawn implies an open even area that excludes some large landscape irregularities (pits, hills). Of course, snags and stumps should not stick out of the ground. their uprooting should be borne in advance. It is best to plant a place under the lawn with soft varieties of grass, which are good to mowing. In this case, you will spend much less effort.

  • Experts recommend dividing the entire area into small squares and mowing along them, moving from one to another clockwise. In this case, the grass that you mowed always remains on the left, and will not interfere with further manipulations with the trimmer.
  • If you need to mow “under the root”, then the angle of contact with the surface should be at least 30 degrees. With this technique, the device is practically in contact with the surface with a cutting knife.
  • There is an opinion that in order to give the lawn of the completed type, it must be mowed by a lawn.type lawn mower. This is partly so, but having adopted, you can achieve good results and with a manual trimmer. To correct the shortcomings after the work of a trimmer for grass, it is also recommended to use hand scissors for grass.

Kosim under hay

Harmity for a village resident is a necessity. this is animal food in winter, fertilizer and covering material that protects the landing from cold weather. Of course, with such a versatility of use, the question arises about a man’s advance harvesting. Kosba for the workpiece differs from the usual aesthetic cleaning of the perimeter in some features.

  • For example, in order not to grind the mulch, you need to mow under the root, lowering the bar with the disk as lower.
  • The bums should be outlined in which the mowed grass will go to. this will help to avoid piles and crowding. In addition, at the end of work, it will be easier to clean.
  • Another very important point is to shield large weeds. For example, a formed bush of a burdock, which not every knife is able to cut. If such a large weed is found on your way, you should bake it in a circle and continue to work. When the work around the perimeter is completed, lonely sticking weeds will remain on the site, which are easy to remove with their hands, moreover, they are not mixed with grass.
  • The main thing in the span for hay is to leave the length of the grass, not allowing it to lose shape. Otherwise, the resulting mulch can only be used as covering material.
  • The width of the mowing should remain strictly fixed, It is necessary to remember the average size and length of the workpiece.

Some experts recommend using a fishing line for a trimmer when running for hay, but this is not always right. Firstly, usually the grass in such a section is high, moreover, its base is a more dense and formed. The use of fishing line will increase engine wear, as it will have to work at high speeds. Of course, this will affect performance. Secondly, a fishing line for a trimmer is simply not provided for such loads. Using this material, you risk not only the fishing line itself, but the whole mower.

The best option is a disk designed for shrubs. it is designed for increased loads. In addition, the high grass is rude at the base, and it will roll the blade most productively than a fishing line designed for soft, silky lawn grass.

There are additional devices for navigation by a trimmer for hay, but all of them are unofficial modifications. In other words, homemade improvements, the use of which is extremely not recommended, The behavior of the device in unexplored conditions can be unpredictable. Following simple recommendations, you can quickly gain the necessary experience and harvest hay in large volumes.

Spinning high grass

It is not difficult to cut high grass. The mowing occurs immediately in two directions. First to the left, then to the right (first passage), cutting off the top. Then in the opposite direction, but already lowering the bar with the blade to the necessary level. In this case, the grass, which was squinted, remains to lie on the left side, which is very convenient when the subsequent collection. It happens that the weeds grew too much and plentiful. In this case, several movements may be needed to the right and left, most importantly, adhere to the correct pattern.

With several movements of the fishing line for a trimmer, it is consumed much faster, but in some cases it may be necessary to get to the base of thickets into which it is impossible to cut through. If necessary, a fishing line for a trimmer can be alternated with a knife. If difficulties arise, and the productivity of the device has decreased, it will be enough to simply replace the consumer and start work again.

Do not try to pump high grass immediately under the base. this can lead to difficulties. For example, a long stem can be wound on a fishing line for a trimmer, which will lead to a long.term unplanned stop.

Important: when working with the blade, the speed of work may slow down a little, since its area is less than the scope of fishing line.

How to work with an electric trimmer for grass correctly

Choosing a technique for a summer cottage, you should not always chase strong and overall devices. The power of the tool is, of course, a fundamental parameter, but it pulls in advance the increased weight of the device, its huge size, as well as the highest cost and overstated expenses for fuel. But that’s not the point.

If you have a small garden, in which fruiting trees or a small lawn with flower beds and shrubs are tightly planted. then cleanse it of weeds and mowed the grass neatly. this is an obviously an overwhelming task for at least a lawn mower. In such cases, even a hand tool is an ordinary braid for grass and then it will not help: you simply cannot swing it, bumping into the trunks of trees.

An impeccable output in this case is a good and cheap electronic trimmer for grass. He is so light, successful and ordinary in management, which always becomes a favorite with ladies and pensioners. Small, quietly buzzing electric motor, handle with comfortable handles and a nylon fishing line for a trimmer, tucked in a spool. these are the main components of an electronic trimmer for grass.

The note! If the trimmer for the grass is installed too high, this will greatly limit the capture of the grass.

Balance of braids for grass by moving the seedling

Having established the necessary height for yourself, you need to balance a trimmer for grass. To do this, adjust the ear to which the device is suspended to the belt, forward or backward. As a result, you need to attach the strap to the trimmer so that when the steering wheel is released, the knife or blade of the saw does not lie on the ground, but hung above it without touching the surface. How it is located depends on the goals set.

Advice! The distance of 20-30 cm above the ground is suitable for mowing high grass, and for lawns it takes 5-10 cm.

Best Grass Trimmer #shorts

Adjusting the shoulder belt

To evenly distribute the load on the shoulders and back, the belts should be correctly adjusted. It is enough to tighten or loosen the belts. They should not break into the body or hang. You can understand how the weight will be distributed if you press the hook to hang the braid.

Attach the bush to the belt

Depending on the model on the belt, you can install a gas tape. using a belt or loop. In the latter case, for the balance, it is necessary to move it along the bar in order to get the desired result. In some cases, shock.absorbing mechanisms are provided that smooth out vibration and soften a sharp spasmodic movement.

Balancing pen

An important step in adjusting the belt is also the adjustment of the handles to the optimal level. When the operator holds motorcycles, the hands should be relaxed, and the shoulders should be parallel to the body. Therefore, after installing a belt with two shoulders, the mechanism with two hands should be adjusted so that moving it up or down. The result should be that the hands only set the direction, and do not hold the device. If after that the balance of the trimmer for the grass is again violated, you will have to repeat all the steps again.

Safety regulations

Among the safest and most popular trimmers, the products of German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that should be clearly known and observed when using a trimmer for grass

  • Please read the instructions before using.
  • Cannot work with a trimmer in a state of fatigue, illness, intoxication.
  • It is forbidden to use tapes in explosive and firefighting places.
  • Do not mow during lightning and rain or after rain, when the grass is wet.
  • You can only work in the daytime with good lighting.
  • Use only the type of fuel and lubrication that is suitable for a specific trimmer model for grass.
  • It is not recommended to repair the tool yourself.
  • Do not touch rotating or heating elements during operation.
  • Do not smoke or light fire during a not the.P.

Important! While working with a trimmer, there are other hazards for health: increased noise, vibration, exhaust gas emissions, high temperature of some parts, flying branches and much more. To minimize risks, you should use protective clothes, glasses and headphones

If you still have questions about setting up the strap of a particular model of the bra, you can try to find answers to the questions attached to the product, or watch an online video that clearly and easily shows how to install and adjust the belt using a braid.

The best trimmers for grass

Trimmer for Stavr TE-1700R grass on Yandex market

Trimmer equipment for grass

Power: 6 AA batteries (not included)

The shoulder belt improves the ergonomics of the trimmer for grass by redistributing the weight of the tool between the shoulders and hands. The design features of the suspension facilitate the mowing process, make it safer. A high.quality belt has wide shoulder straps, an elastic belt and rapidly unfastening carbines in case of sudden fire or another situation, when you need to immediately free yourself from the tool. The shoulder belt of a trimmer for grass is universal, suitable for men and women.


The most popular manufacturers of trimmers with a shoulder belt are American companies MTD, Patriot, also a German company STIHL.

A rather pretty element of the site is now the lawn. But it will look great if you care for him. For this purpose, you should often water the area, feed with fertilizers and cut the grass once a week. If you neglect the last condition, then the territory will be rapidly rapidly reincarnated into dense thickets.

To increase the convenience of control, the presence of a bicycle handle is foreseen, it is busy on what it remains to make our client the necessary control buttons. This equipment, as customers say, is used to cut grass in personal plots. The design is durable, it is designed for saturated and long.term operation.

The above trimmer for the grass of the gasoline “Huter” should be used taking into account the safety rules that are registered in the annotation. From their number we can study that the use of equipment to persons who are under the influence of alcohol in other words are tired at the physical level is unacceptable. Before starting work, you need to arm yourself with special means of protection, in the middle of them you should highlight appropriate clothes, protective glasses, gloves or gloves, helmets and headphones. Equipment should not be used near flammable and explosives. This also applies to the criterion when the highest humidity remains.

Balancing motorcycles. Why is it hard to mow and hurt shoulders, arms, back?

Balancing motorcycles. Why is it hard to mow and hurt shoulders, arms, back?

Hello, dear readers and homemade!

Many of you sometimes have the task of mowing grass on the site, or near the house.

In this article, the author of YouTube Channel “Hassan Abu.izmero” will tell you how to make a nozzle for an electric screwdriver with which you can mow grass. Of course, such a homemade can not cope with large volumes, but it is perfect for those places where you can’t get a full.fledged trimmer.