Cutter
This fixture is used by experienced craftsmen who are professionally engaged in finishing work.
The use of the cutter provides a perfectly smooth cut and allows you to shorten PVC strips without much physical effort.
I bought such a tool, you can be sure that there will be no problems with high-quality cutting of panels.
Facing surfaces with PVC panels. The finishing method, which is chosen today by many, as the most optimal. It's fast, simple and relatively inexpensive.
But in the course of the work, the question always arises: how to cut the PVC panel? There are several possible ways, after considering which you can choose the most acceptable option for yourself.
Jigsaw and angle grinder
Jigsaw applications. Fast, but not too high quality way. It is unlikely that it will be possible to achieve an ideally even cut with its help, moreover, chips often form along the edge of the panel, so it is best to refuse this option, give preference to the same angle grinder.
Using this tool will provide an even spray, but only because of the high speed, the panel begins to emit an unpleasant odor and toxic substances.
The better to cut?
Different tools can be used to cut the panels. These include both special professional devices and ordinary hand or electric tools used in everyday life for various purposes.
What are they made of?
The raw material for PVC wall panels is polyvinyl chloride, which is poured into a die (casting mold) under high pressure.
This method is called the extrusion method. To add color, ground natural chalk is added to the composition of the material, the amount of which is, as a rule, no more than 40%.
In addition to painting, panels are decorated using thermal printing or offset printing, but the latter method is used less often due to its higher cost.
Thermal printing is applied on a specially designed machine using a hot roller, which press the thermal film to the surface of the product. Thus, it is possible to achieve fast transfer of the picture and a clear and bright print, and the panel itself does NOT need to be varnished, in contrast to the use of offset printing.
Hacksaw
This tool is present in any home workshop. For those who are not ready to spend money on purchasing a cutter, using a hacksaw may well be an option for solving the problem of cutting panels.
Yes, this method will take a little more time, but with a small amount of work This will not affect too much the duration of the wall cladding.
It is important to note that a hacksaw for metal is best suited for cutting panels, and if you use a tool for wood, then the blade should have fine teeth. For cross cutting.
Several options are possible here:
Simple kitchen knife
Although this tool is the least suitable for cutting PVC products, one or two strips can be cut in case of repair and replacement of panels. But with large-scale work, it is impractical to use it. The process will be long and painful;
Construction knife
Stationery knife
It is often used for cutting panels. Using a square or a flat wooden plank used as a ruler, it is possible to achieve an even cut.
How to cut PVC panels: tool selection
- Application of panels
- Cutting rules
- What is needed?
- Cutter
- Hacksaw
- Jigsaw, circular and angle grinder
- Knife
Undoubtedly, tiles are considered to be a classic material for finishing a bathroom, however, PVC panels have an increased installation speed, and additional maintenance of this material will NOT be required, because neither soap nor water is deposited on their surface. Initially, plastic panels worked well due to their ease of installation. To carry out such work, you will NOT need help from specialists and a complex tool.
Hacksaw
practically, a hacksaw is considered to be in use, and it does not matter whether it is for metal or for wood. The only requirement is when using a hacksaw for wood. This is the presence of small teeth, which should NOT be diluted, because in this way the surface of the material is destroyed, which must be dusty into parts. Such a tool is often used for cross-cutting.
The advantage of this tool is the ability to cut multiple panels simultaneously. For this operation, you will need to stack the material.
For convenience when cutting, it is better to have the planks facing the performer. When reducing the length of the panels, you need to take care not to put tremendous efforts on the acquired tools, because this can break the PVC sheets.
What is needed?
Currently, a huge number of tools have been created, thanks to which it is possible to shorten the length of a material. When working with plastic panels, it is necessary to take into account many factors, among which the main ones are practicality, cutting speed, surface quality, as well as ease of use.
Cutter
This tool has proven itself well due to its low cost. Perfect for home use.
The tool has excellent performance and the cut surface looks smooth. It should also be emphasized that it will NOT require any special physical effort to carry out the cutting. A huge advantage can also be called its compactness, in which it does not take up much space during its storage.
Application of panels
In the process of sheathing, it is necessary to initially determine the tool used for cutting the plastic panels. This material is widely used for decorating balconies or bathrooms, because it has an excellent set of properties. It is also impossible to forget about its practicality, which makes it even more popular. Plastic panels also attract buyers with their low cost and excellent appearance.
Each owner can independently finish the bathroom at home and at his discretion, because there are a huge variety of panel options that can be used for this. All PVC panels are manufactured with a standard length of 3 m.This is not always practical, because it needs to be cut into pieces to obtain the desired size.
Cutting rules
For safe work, you must clearly follow the following rules:
- When working with panels that were brought in from the cold, you must wait a short period of time. This action is necessary in order to warm the material. If you could not obey the advice, then the plastic panels in the process of cutting will riot salesmen, thus losing their neat appearance. There are often cases when cracks appear on the surface that is cut along.
- In order to get several planks of the same length, it is necessary to lay them on at least 2 supports. This protects against sagging or displacement. Ghouls recommend the edge of the element, which is NOT pruned, into the wall. Thanks to this action, you can secure against their shift.
- You can facilitate the process, We will make the markup with a pencil or felt-tip pen.
- It is necessary to cut correctly with the wrong side of the panel down, because during processing under the influence of a load, the profile of the strip changes and causes some inconvenience during the installation process. Microcracks often appear on the front surface, which appear in the future.
- When using a power tool, you must use protective goggles and gloves, which can protect against debris and sawdust flying in different directions during the cutting process.
How to cut PVC panels
Among the variety of finishing materials used in construction, plastic panels occupy a separate category. This is a modern coating that is used for interior decoration, and sometimes. Outer walls. They are made from polyvinyl chloride by extrusion. Before performing installation work, it is important to decide: the better to cut PVC panels. The assortment of tools and accessories offered on the market is full of offers, both general and special. Among all the tools, you can choose what will cut the plastic panels.
How can PVC panels be cut
Plastic finishing material can be cut both lengthwise and across. Of course, the main blanks are cross-cut. When it is necessary that the sewn surface is completely closed, then it is necessary to use a longitudinal cut. Before starting work, it is determined how to cut plastic panels at home or at an industrial facility. The number of blanks required for wall cladding is of no small importance.
Using many years of experience in the use of PVC materials in interior decoration, Let's highlight what you can use to cut plastic panels:
- Construction knife;
- Hacksaw for metal;
- Angle Grinder;
- Jigsaw;
- Cutter;
- Hacksaw for wood.
The use of any of THESE tools will help solve the question of how to cut the PVC panels, but each of them has its own characteristics, which must be taken into account when performing work.
Cutter
Such a device is convenient when speed and high-quality cut of the end face of the workpieces are important for solving the problem. The speed of such a tool is high, while the quality is better than any of the above. But, when working, you need to carefully examine the panel for possible chips and lay it inside out to the cutter, and with your face. Support surface. This is due to the fact that the cutter can push the surface of the PVC workpiece by 2-5 millimeters.
The tool simplifies and speeds up installation work. The purchase of a cutter will forever close the question of how to cut off a plastic panel, and other methods will no longer be relevant. When using it, it is important to remember that such a tool will NOT be able to trim in place with such a tool.
Hacksaw
If, when performing finishing work, the question concerns how to cut the panels exactly, then for such a case, it will be correct to use a hacksaw. When the edge of the panels is hidden from the eye by the starting or corner finishing profile, then a hacksaw is used for wood. If the cut area remains in sight, then use a metal tool.
When choosing what to cut plastic panels, attention is paid to the convenience of work. When using a hacksaw on wood, the workpiece will vibrate strongly and must be held firmly. And when using tooling for metal, the vibration effect will be little noticeable, but the tool will need to be held almost parallel to the workpiece plane. This is due to the thickness of the blade holder, which is larger than the blade.
In both cases, the panel is placed facing the cutting tool so that all chips and imperfections remain on the wrong side.
Jigsaw
Using such a power tool will help to cope with cutting panels and reduce labor intensity, in comparison with a hacksaw or a construction knife. Convenient to use a jigsaw when preparing a large number of workpieces.
When performing work, the place of the cut is first marked on the front surface, and then smoothly cut to the required size, passing the tool along the marking mowing line. Cellophane or other material is placed under the jigsaw support leg, which will prevent the possibility of scratching the PVC panel. In the case of simultaneous cutting of several blanks, they are fastened with plastic clamps or wrapped with transparent tape. At the same time, it is better to isolate the front surface from the adhesive tape (lay a letter of paper).
Construction knife
In any household, you can find a kitchen knife, sharpen it and use it to solve the problem than to cut off a plastic panel. But, to get a high-quality cut, it is better to use a construction or clerical knife. Replaceable blades, with which the tool is completed, will allow you to get a flat, smooth surface. Cutting with a knife is faster than using dusty tools. But, when you have to deal with the cellular structure of plastic panels, the use of such a tool becomes inconvenient.
When using a construction or clerical knife, the panel is marked out, then laid on cardboard or the cut part is left hanging. After that, pushing through the front and back sides of the finishing material, they separate unnecessary parts. If a large area of unclaimed plastic part remains, then it is better to put or substitute resistances under it, in order to avoid kinking or skewing the workpiece.
Power tool
For quick sawing of PVC panels, a power tool at hand is best. For this purpose, you can use almost any device, which will help significantly reduce the time spent on preparing for installation.
Often, cutting is performed using the following devices:
- Electric jigsaw;
- Angle Grinder;
- Circulars.
To work with plastic material, only low speed can be used, because with significant heating it begins to melt and release fumes toxic to the human body, and in this case the cut will turn out to be torn.
Using a jigsaw will help make the process of preparing PVC panels for installation much faster than using a hand tool.
However, with such a method of processing, the following nuances should be taken into account:
- Before starting work, you must turn off the pendulum stroke;
- A saw with as small teeth as possible should be used;
- It is necessary to set the lowest speed of the saw movement, which will avoid excessive heating of the plastic at the cut.
Using a jigsaw is very convenient to cut stacks of panels, but it's worth it Make sure that their height does NOT exceed the length of the saw installed in the tool.
The angle grinder is recognized as the most convenient and practical power tool with which you can cut PVC wall panels. I installed a cutting disc, you can make Not only straight, but also curly cuts on the plastic surface. When processing plastic around the angle grinder, it turns on only at low speeds, which will avoid damage to the material due to melting of the edges.
In the absence of more practical and convenient tools, PVC can be cut with a knife.
To solve this problem, the following types of cutting products are suitable:
- Kitchen knife. This tool is suitable for cutting multiple panels in the process of repairing or replacing them. For large-scale wall decoration, such a procedure is unnecessarily long and painful.
- Construction knife. Among hand-held cutting tools, such a device is one of the best options for achieving a smooth cut with little effort.
- Stationery knife. Using a wooden ruler or square, this tool allows you to achieve a perfectly even cut of the panel, therefore it is often used to cut them.
Basic cutting rules
So that the efforts on cutting PVC panels are not wasted, and the result of the work meets expectations, experts recommend adhering to a number of rules for working with plastic. These little secrets will help Not only significantly reduce the amount of spoiled material, but also save the master from unnecessary financial expenses and injuries.
When carrying out work in the heated season, you should not start cutting panels that have recently been brought into the room. The plastic should naturally warm up to room temperature, which is achieved in at least 12 hours. The fact is that at low temperatures, the plastic panel becomes fragile, and therefore it can crack and break off in large fragments.
Regardless of the chosen method of processing the material, it should be placed with its front side facing you, which will avoid deformation of the panel and difficulties during its further installation. When cut from the seamy side, you can find microcracks on the front part, which will manifest itself over time and significantly spoil the interior.
You need to mark in advance a straight line for the planned cut, which can be done with a simple pencil and a stationery ruler.
To speed up the process of preparing the material for installation work, you can cut or dust several PVC panels at the same time. To do this, it is enough to stack them in a pile and create a two-point resistance. It is best to rest the opposite edge of the stack against the wall, which will help avoid shifting the products, respectively, as a result, parts of the same length will be obtained.
Hacksaw
One of the universal devices for cutting any material is a hacksaw, which is sure to be found in the arsenal of any master. It is she who will help, if necessary, cut the plastic wall panel. Such work will take longer than using a special cutter, however, with significant volumes of cladding, this will NOT significantly affect the total repair time.
When using a hacksaw, it is worth listening to the following recommendations of experts:
- To work with plastic finishing materials, you should use a tool with small teeth, which is usually designed for working with metal or wood;
- To shorten the PVC panel, it is necessary to use strong physical efforts, which may damage the material;
- You can cut several parts at once with a hacksaw by folding them in a pile and securing them to avoid bending or displacement.
To make the cut NOT serrated, it is not recommended to use a tool with teeth set apart in different directions.
How to cut PVC panels?
- Material features
- Choosing a cutting tool
- Cutter
- Hacksaw
- Power tool
- Knife
- Basic cutting rules
- Safety regulations
PVC panel is one of the most popular materials for interior decoration. Its use in the interior attracts not only by its appearance, but also by its affordable price, ease of maintenance and installation. Due to the listed characteristics, many people prefer PVC panels, rather than tiles, when decorating personal hygiene rooms.
Choosing a cutting tool
Specialists in the implementation of repair work, who have to carry out the installation of PVC panels in their professional activities, know many secrets of the correct cutting of plastic materials up and down. After analyzing them, each owner who wants to make repairs on his own will be able to choose the most suitable professional tool for him or use the means at hand.
The choice of a method for cutting panels usually depends on the tasks and capabilities of the master. Below are the types of cutting materials.
Cutter
If necessary, this tool can be made independently from available tools, for which it is enough to adhere to the following recommendations:
- It is necessary to prepare a metal strip, the thickness of which is at least 2 mm and the width is 1 cm;
- Then you should cut one of the edges of the workpiece at an angle of 45 degrees;
- It is necessary to sharpen the edge of the homemade product using a grindstone;
- The opposite side should be wrapped with electrical tape, which will allow you to protect your hand from damage during work.
A professional cutter for plastic has a very low cost, so its purchase can serve as a more profitable investment, because thanks to such a tool, the process of cutting PVC panels becomes not only more convenient, but also quite fast.
How to cut plastic PVC panels
Plastic panels have a number of advantages that make them an indispensable material for quick and inexpensive renovation of bathrooms, toilets, loggias and garden houses. The panels are impervious to moisture, are low-combustible materials, resistant to mechanical abrasion, have a long service life and are very cheap. They can decorate both walls and ceilings. The technology of mounting plastic panels is simple and does not require preliminary surface preparation.
One of the essential stages in the installation of plastic panels is their cutting to the required size. The complexity of this stage depends on the state of the surface to be finished: if the wall, for example, is straight and even, then you can prepare the entire volume of plastic panels required for it in advance. If the wall has different heights, complex shapes or includes architectural elements (windows, doors, ledges, etc.), then you will have to cut the panels along the way, which, of course, significantly increases the installation time.
How to cut plastic PVC panels?
It should be noted that plastic panels are quite easy to process, and they can be cut using a wide variety of tools. Most often, hacksaws for metal or wood with small teeth are used for this. The advantage of this method is that several panels can be sprayed with them simultaneously. It is necessary to dust the panel face up, at a slope, avoiding strong pressure. If you use dust on wood, it is better if it has teeth for cross or mixed sawing, if possible, and not set apart. This saw will leave a smooth, scuff-free cut. You can also use a jigsaw, but when cutting, they need to strictly dose the pressure, otherwise the panels can simply break. Some people use an "angle grinder" and circular saws to cut panels to speed up the process, however, in our opinion, such methods have several disadvantages: firstly, plastic is quite fragile and light material, and careless handling of it can lead to the fact that the panel will simply break; secondly, from heating when cutting with a tool at a high rotation speed, the panels heat up and begin to release toxic compounds.
There are several rules to follow when cutting panels. If you brought the panels from the cold, let them “warm up” at room temperature for several hours: cold plastic becomes brittle. Before cutting the plastic panels, mark them out to the size you need. It is convenient to do this using an ordinary felt-tip pen. It leaves a highly visible mark on the panel and is easy to wipe off. Safety precautions must be observed when cutting panels. It is advisable to wear safety glasses and gloves. Remember that when the panels are brittle, sharp fragments are formed, which can cause injury.
How to cut plastic panels. Three cutting methods
Thrifty homeowners know that there is no better and more practical material for bathroom and toilet wall cladding than decorative PVC panels. They perfectly replace ceramic tiles in cases where there is not enough money or time for a full repair.
This material is also loved because it can be easily assembled by hand. However, the standard panel length is 3 m, which exceeds the ceiling height in typical high-rise buildings. In this regard, inexperienced craftsmen who decided to sheathe the walls of the bathroom with their own hands, the question arises of how to cut plastic panels at home. In this article we will tell you about a special tool for sawing plastic and improvised tools that can be used for this operation.
Hacksaw
Hacksaw. A universal tool, which is available in the arsenal of any master. It can easily cut plastic wall panels, if it is not possible to purchase a special cutter. With a hacksaw, the cutting process Takes longer, but with a small amount of work, this does not significantly affect the duration of the wall cladding.
When sawing plastic with a hacksaw, the following nuances must be taken into account:
- To cut PVC, use a tool with fine teeth for wood (cross-cut) or metal.
- Sawing plastic does not require strong force, otherwise material may be damaged.
- With a hacksaw, you can cut several panels at once, folding them in a stack.
Cutter
Experienced craftsmen, who have in their arsenal a whole range of special tools for processing plastic, are used to cut PVC panels for wall cladding with special cutters. This useful tool makes an absolutely straight cut on plastic without the use of physical effort.
Craftsmen may well make that tool with their own hands according to the following instructions:
- It is necessary to take a strip of metal sheet with a thickness of at least 2 mm. The strip must be 1 cm wide.
- One edge of the metal strip is cut at a 45 degree angle.
- One side of a homemade cutter is sharpened with a whetstone.
- The opposite side is wrapped with electrical tape, so as NOT to damage your hand during work.
Power tool
The most impatient can use PVC panels for cutting with a power tool. For THESE purposes, any device is suitable, which is at hand in the master. This method allows you to quickly spray plastic, saving a lot of time. Cutting is performed using: