“Hooter” Trimmer: Reviews.

Quite an attractive element of the site today is the lawn. However, it will look good if you care for him. To do this, you should regularly water the area, feed it with fertilizers and cut the grass weekly. If we neglect the last condition, then the territory will quickly turn into dense thickets.

The need for a trimmer.

For mowing the grass today uses special equipment such as trimmers. However, if you decide to purchase such a device, then you need to decide not only with the manufacturer, but also with the model. For example, the “Huter” trimmer, the reviews of which you can read in the article, can be an excellent option. With the help of such a device you can in a short time cut a small lawn, save the area from weeds, and also cut the grass between the trees. huter-ekspluatatsiya-i-remont. Visiting the store, you can get confused, because this manufacturer offers trim models in a wide range. In order to decide, it is necessary to pay attention to the main characteristics, which will be discussed below.

Reviews of trimmer brand “GGT-1900T”

To improve the ease of operation, a bicycle handle is provided, on which are located all the necessary control buttons. This equipment, according to buyers, is used for cutting grass in the garden plots. The design is durable, it is designed for intensive and long-term operation.

Reviews about the main features and advantages of the model.

  • vibration damping system;
  • structural strength;
  • long service life;
  • the location of the controls on the handle;
  • easy start

The Huter 1900 trimmer has a rather impressive capacity, which is 1.9 kW. A knife or a fishing line is used as a cutting element. The capacity of the tank is 0.7 l, and the thickness of the line is 2 mm. Before purchasing this equipment, you must consider that its weight is impressive enough. It is claimed by many novice users. The mass of the equipment is 7 kg.

Instruction manual model.

The above trimmer petrol “Huter” should be used, taking into account the safety rules that are spelled out in the instructions. From them, you can learn that the use of equipment to persons who are under the influence of alcohol or physically tired is unacceptable. Before starting work, it is necessary to equip with special protective equipment, among them should be allocated appropriate clothing, goggles, gloves or gloves, a helmet, and headphones. Equipment should not be used near flammable and explosive substances. It also applies to conditions under which high humidity is maintained.

Reviews of electric trimmer brand “GET 1200SL”

If you want to purchase the Hooter Electric Trimmer, then you can pay attention to the model that was mentioned in the subtitle. Its cost is not so high and amounts to 5,000 rubles. The equipment, according to buyers, can be used to treat the lawn in the garden, as well as the treatment of small areas. You can use a tool for mowing grass, even in hard-to-reach places, such as along a fence or under benches.
The power of the unit is sufficient to perform tasks in everyday life and is 1.2 kW. The bar is collapsible, as buyers emphasize, it simplifies not only storage but also transportation. This example is the ideal solution for women and the elderly because the equipment has a small weight. weight is 4.5 kg.

Trimmer repair: carburetor adjustment.

Repair the trimmer “Huter” can be carried out by you when you need to adjust the carburetor. But for the beginning, it is necessary to carry out maintenance of the equipment, for this purpose it is washed, as concerns the engine, and then the spark plugs are changed, eliminating minor defects. It will be necessary to wash the foam element of the filter using warm soapy water. If the adjustment is made on a dirty filter, after cleaning the fuel mixture will become poorer, which will lead to poor performance or engine breakdown. In the next step, you should install a trim head with the largest possible cord. Its length should be standard.
The tool starts warms up for 10 minutes, and after that, the left and right needles turn to the middle position and are installed between the twisted and off position. There will be three adjustment screws: lower, left, and right. The right will regulate the enrichment of the mixture at low revs. It is essential to find the maximum idling speed and turn the right screw. Then this screw is rotated clockwise. Adjusting the idling speed will be considered correct if the cold engine is idling and the hot engine is not too high. The Huter trimmer carburetor is correctly tuned if the engine is steadily and quickly gaining momentum.