Trimmers for Viking (Viking) grass: features, overview of popular models
To answer this common question, you must alternately consider the main working parameters of the cutting cord.
How to replace a fishing line for a trimmer on a trimmer how to wind a fishing line for a trimmer for a trimmer for grass
- thickness. the larger the diameter of the fishing line, the higher its effectiveness when working with thick weeds;
- section. cords with a twisted and round section proven themselves best. Another popular option is “Star”. Cords with a cross section of this type successfully cope with high thick grass and young shrubs;
- manufacturer. cutting cakes of brands Husqvarna and STIHL are highlighted by high quality, strength and durability. Their only minus is a high price. In such cases, you can choose inexpensive cords of brands Sturm, Forte or Intertool.
When choosing a fishing line, it is desirable that the gardener has the opportunity to check the cord with your own hands. It is important to stretch the cutting cord and try to break it. If the fishing line for a trimmer does not lend itself, then it can withstand a fairly high load.
Milwaukee M18 FUEL String Trimmer: Line Replacement Tutorial
Technologies do not stand still and to minimize human participation in the process of mowing grass, the Viking brand has developed fully automatic robot models that I cut the lawn.
You only need to program the device and you can do your own business. The intellectual system will notify the owners if the unit is tried to kidnap.
In the case of the rain that has begun or with a decrease in the battery charge to the maximum minimum, the robot itself returns home. The Mi 632 model is equipped with a 194 W battery with a capacity of 194, which allows you to successfully process up to 0.4 hectares.
How to refuel a fishing line for a trimmer to a lawn mower: how to change and charge a reel, how to change and how much to wind it into a trimmer for grass
When spring comes, people often spend their free time in a summer cottage. They try to save their site from such a problem as weeds and grass with the onset of warm days. It is difficult to do this manually, especially if the territory is very large, so the lawn mower will help. Thanks to this technique, you can trim the grass and remove weeds. this is a suitable device to mow unnecessary plants near the fence, at home, between rows in the garden on a flower bed and so on. About how to choose a lawn mower, which is suitable for your needs, read here. The cutting element in this device is a fishing line for a trimmer (strong polyethylene thread), which is wound on a special element. a reel. But over time, the fishing line for the trimmer wears out and there is a need to replace it. The article will talk about how to refuel a fishing line for a trimmer to a lawn mower.
This Viking model is actively used by gardeners to care for small flower beds, equalization of herbs on decorative pedestrian paths and the fight against thick shoots in greenhouses. Despite the low power, this garden tool is able to fight weeds, the thickness of the stems of which reaches 2 mm. Improved rotary system Electrikos easily tolerates short high loads without harm to the main working mechanisms of the model.
Viking trimmer in this household configuration is equipped with an ergonomic D-shaped handle with soft rubber inserts. If necessary, its position can be adjusted using a bolt connection.
The main parameters of this Viking electric shock include:
- The power of the factory engine is 600 watts;
- grass cut width. 35 cm;
- The maximum speed of rotation of the cord/cutting knife is 7400 rpm;
- The permissible diameter of the fishing line used for mowing is 2 mm.
The minimum weight of this amateur instrument gives its owner the opportunity to raise a trimmer for grass and hold it in an upright position to remove the stems of curly weeds.
Trimmer for Viking TE Grace is one thousand. description of the model
Amateur trimmer for Viking grass is used for edging and haircuts of decorative lawns, flower beds and pedestrian paths. The garden tool is equipped with an ergonomic handle, the position of which can be adjusted in line with the growth of the operator. To send the cutting organs, the model is armed with a mound mechanism. This decision makes it possible to protect the bark of trees and flower trunks from random damage.
Viking trimmer one thousand is equipped with a massive engine, the speed of which can be adjusted using an electric system. The engine is equipped with effective protection against overload, which warns the unexpected breakdown of the motor during saturated operation in hot weather.
The technical properties of this amateur tool include:
- The power of the industrial engine is one kW;
- Grass cut width. 30 5 cm;
- The highest speed of rotation of the cord/cutting knife is eight thousand rpm;
- Permissible diameter used for mowing fishing line. two mm.
The internal elements of the electric ships are firmly protected by the reinforced plastic case, which can be disassembled using the key from the kit.
What can be used instead of fishing line
Many users of trimmers are wondering: how to replace the cord, by default used in this kind of devices? Unsafe experiments begin to carry out, installing metal or copper wire, metal cables or strings in a mowing head, as well as a regular fishing fishing line for a trimmer.
If you install a metal cable instead of fishing line, then a trimmer for grass turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during the operation of the unit, the steel cable will be gradually shut up, its ends are gradually released, and small pieces of wire will fly in different directions at high speed.
And if you accidentally hook your or someone’s leg, working as an unit with a steel cable (wire), then a strong and deep section of the fabrics, and in some cases, amputation of the fingers are provided with you. The manufacturer is not in vain for these purposes, nylon uses, since it is quite light and durable, and when separating he does not fly away and cannot cause injury.
It is possible to use a fishing fishing line for a trimmer in a trimmer instead of a standard one, of course, but this will add unnecessary trouble, because it quickly wears out, breaks, mows slowly and does not fit for cutting hard grass. In addition, during the work, a lot of time is lost to replace the broken tool more than once.
In practice, the installation of a regular fishing line is justified if the user is going to mow grass near the fence, especially if he is from a rabid grid. In this case, in order to protect the standard and sometimes expensive cord from wear, it changes to a fishing fishing line for a trimmer, which is not a pity. Usually, in order to change the cord to a fishing line for a trimmer, it must be selected the greatest thickness-2-3 mm.
How to insert a fishing line for a trimmer into a trimmer for grass?
Refueling a mowing coil of cutting thread for a trimmer for grass is not a complicated occupation, however, novice gardeners will have to practice a little to be able to quickly insert the cord into the existing household trimmer for the grass.
There are several ways to refuel a mowing head of a trimmer for grass. The first method is the simplest and is well suited for beginner gardeners.
In this case, the cord is inserted into the coil in the following sequence:
- First, you will need to reinforce from a common spray of about 6 m fishing line for a trimmer for grass, and then cut the resulting segment in half. As a result, 2 threads should be obtained, 3 m long;
- Then, at one of the ends of the first segment, you need to make a peculiar hook, and insert it into one of the through holes located in the upper part of the spool;
- Next, you need to start wrapping the fishing line on the spool in the direction indicated by the arrow. During winding, it is necessary to ensure that the fishing line for the trimmer evenly lays on the surface of the spool, and does not go beyond its upper section. It is not necessary to wind the segment until the end, about 15 cm of thread should remain in the hands;
- The remaining free end of the wound cord will need to be inserted into one of the recesses located in the upper part of the spool;
- Further, the same procedure will need to be done with the second piece of fishing line. It will need to be wound on the lower section of the spool;
- As in the first case, you do not need to wind a fishing line for a trimmer to the lower section. The remaining piece of thread will need to be inserted into the second groove of the spray.
After the operation performed, the coil will need to be installed on a trimmer for the grass and start it. To check the reliability of fastening the thread, you will need to press the gas lever to the end so that the engine reaches maximum speed. If the fishing line for a trimmer does not fly out of the head, then the fishing line for the trimmer is held reliably, and during the mowing of the grass it will not fly out of a braid coil.
What is a trimmer for grass?
The basis of this equipment is the following elements:
- engine, the main function of which is the rotation of the cutting head at the end of the bar;
- directly the head, consisting of a coil, on which either a fishing line for a trimmer or a knife can be wound;
- The knives rotating at high speed or a fishing line for a trimmer, which are the main cutting part of the device, about how to charge a fishing line for a trimmer to a trimmer for grass, will go a little further.
The electric device is inferior to gasoline in its power, so it is ideal for working on a standard plot of land, which adjoins the house with source of electric energy. The main positive aspects of such technology are the lack of noise during operation, light weight, ease of operation and, of course, environmental friendliness.
As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any site. Electricity here is not at all necessary to use, which positively affects the functionality of such an apparatus. cutting nozzles can be changed by working with a variety of weeds that are different in type.
One of the most common nozzles is a fishing line for a trimmer, so you should dwell in more detail on this element.
Method 2. how to dress a fishing line for a trimmer to a coil of motorcycles with a photo description and video
The second method differs from the first in that not a whole piece of equipment is charged into the coil, but segments of two parts. Manufacturers use this way, and it is also suitable for those who have the remains of the material. The principle of how to insert two segments of the fishing line into the tip of the motorcycles, the same with the first way, and to make sure of this, below is a detailed instruction:
- There are two equal lengths of the segment of the material that you can use
- One segment is taken, and the edge is bend in the form of a clamping bracket or hook, with which the fishing line will be fixed
- Inside the coil, there are holes in the form of a bracket for fixation, which are there for a reason. If they are not, then the second option will not work. The appearance of these brackets is shown in the photo below. Each bracket is on its own
- The line of fishing line should catch on the bracket, and make it wound in compliance with the direction of the arrow
- The equipment is wound until the segment of 10-15 cm remains, which is fixed in the corresponding hole on the side of the tip
- The same manipulations with the second end of the fishing line are carried out
- The protrusions are starting into the holes of the head, and then, extracting the equipment from temporary fasteners in the coil, a cover with clamps is installed
The above instructions on how to install a fishing line for a trimmer in a motorcycle will help not only correctly, but also quickly perform a replacement procedure. The assembly of the coil of the trimmer for the grass, as mentioned above, can be performed without removing the head, but in this case you will need to conveniently fix the tool. Video Instruction is presented below.
What you need to know about the fishing line on the trimmer for the grass
Fishing lines is called consumable, which consists of nylon, and serves as a cutting device. Through this equipment, the grass grows, which is ensured due to rotation of the instrument head with a high frequency. This material has a different thickness, which depends on its use on the corresponding tools of low-power (from 1 to 1.6 mm), electric from 500 W (2-2.4 mm) and gasoline trimmers for grass with motorcycles (from 2.4 up to 3.2 mm).
The more powerful the tool, the accordingly there should be a cutting equipment. This affects not only the quality of the injection of grass, but also on the life of the material. If you ask the question of how to wind the coil of a trimmer for grass, then it’s time to change the reload of the tool. With the onset of spring, this issue is becoming more and more in demand, so it’s time to understand the step.by.step instructions for replacing the fishing line in the coil of the trimmer for grass.
If there is a country plot or large land near your individual house or cottage, then for the convenience of cleaning grass and weeds, you must use the lawn mower. If you think to choose an electric lawn mower or gasoline, then click here and you will find comparative characteristics of different models.
Over time, a fishing line for a trimmer on a mower wear out and it needs to replace it. this can be done yourself. Choosing this polyethylene thread is necessary depending on the model of the mowing. It is also worth monitoring the rest of the unit details, for example, you will find information about knives for the Craftsman lawn mower, which also wear out and can lead to irreversible consequences.
The device of the coil, into which the fishing line for the trimmer is inserted, is very simple. But it differs depending on whether a coil with one or two antennae works works
Features of the device
I definitely would like to draw your attention to the fact that each individual model has engines of different power. First of all, its strength depends on exactly where the manufacturer made the initial installation.
Because, for example, if the engine is located at the bottom of the tool, then in this case its power will be 300-600 watts. And if the area of the upper mower is 400.15 watts.
Now let’s talk about the main parts of the lawn mowers are lawn mowers for high grass and weeds. So:
It is impossible to ignore the fact that it is precisely the mowels of electricity that have an undeniable advantage, namely noiselessness during work. Because, unlike gasoline devices, their noise level is low.
over, such a lawn mower is really “clean”, because it does not make emissions of pollutants during its direct work. In addition, this device is easy, and this function applies to all models of electric mowers.
Thanks to his lightness, you can maneuver with him in any direction without any trouble and effort. over, this is the simplicity of transportation and storage, because it takes up very little space.
But, frankly, the lawn mower for tall grass and uneven areas also has the drawback that it is equipped with a power cord, which it is equipped. After all, he simply “breaks” and limits the direct radius of your movement. over, he can even get under the lawn mower while working, so you should carefully monitor its position.
If we talk about its size, then its maximum length does not exceed twenty meters. As we said earlier, technological achievements are developing rapidly, this is also true for this device.
Aspects of choice
First, let’s figure out what a lawn mower is, and then consider all the nuances of choosing the tool itself. So today you can choose a mower, drum or rotor.
Naturally, there are distinctive features between them, namely the difference in parameters, the main of which is the engine, namely its power. It is also important that if you need a very “strong” lawn mower, it is best to choose a rotary lawn mower.
How To Replace String Trimmer Line With 2 Strings-Dual Feed Tutorial
To simplify the task of determining these types, we note how they differ: the rotating type has four wheels, and the drum type has two straight wheels.
However, even if you read the description of the device, you still doubt it, we recommend that you click here and get a consultation with a specialist in choosing a lawn mower.
First of all, to wind the fishing line, it is required to remove the coil (bobbin, spool) from the trimmer for the grass. specific actions will depend on the complexity of the configuration and the type of product itself:
- Small electric trimmers for grass with a working location of the engine and coils in the lower part, as a rule, have side keys on both sides of the bobbin. With the simultaneous press on them, the upper part of the coil, along with the internal contents for winding the fishing line, is disconnected, while the lower remains on the trimmer. It is advisable to analyze the bobbing in an even smooth place, so that the spring does not jump out and not be lost;
- Electric and gasoline trimmers for grass with a curved rod without the ability to install a knife, as a rule, have coils with a special lamb: in such structures, you should hold the spool in a fixed position with one hand, and rotate the fixing bobbin on the bar with a barack’s baracks. After disconnecting the nut, the whole bobin is removed.
- Electric and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and, with slow rotation, such a mutual arrangement is achieved when the screwdriver enters the hole and the bob is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.
For the second and third cases, the coil, depending on the design, are versed in various ways. In the bobbins with a lamb, lamb is twisted, in the reels with latches, latches-fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then it is enough to turn them with your hands in the opposite directions until they are completely developed.
How to choose a fishing line for a trimmer. length, diameter, restrictions
It is important to remember! You can not use fishing fishing line for a trimmer or metal cables for a trimmer for grass. This replacement is not effective and dangerous
The cable can injure not only the mower himself, but also others. As for the length, it is worth counting on the estimated frequency of using a trimmer for grass. The more often, the more it is worth stocking up.
Information about the possible diameter of the fishing line is found on the body of the coil for a trimmer for grass. Most likely, the range will be indicated there. The thickness varies from 1.2 to 4 mm. Choose a suitable option, taking into account the features of the processed territory. The larger the diameter, the easier it is to mow hard grass.
Viking Ma 339
The battery model is ideal for those people who will gladly abandon wires and constant care for fuel. Thanks to a powerful lithium-ion battery, the unit can easily cope with an area of up to 300 m2.
The case is made of very durable plastic, which does not burn out in the sun, does not crack and reliably protects internal mechanisms from damage. The system of adjusting the level of cutting of grass consists of five steps.
The mulching function increases the productive value of the device, and the presence of special handles for carrying and folding handle contributes to maximum compactness during storage.
Viking Ma 339 operating instructions
All Viking products are a worthy representative of its sphere, therefore, having chosen the product of the specified brand, the person will probably not fail and will be satisfied with the result of the haircut and operational features.
TIKING TRAMER VIKING TI 700. Working Parameters
From many market analogues, this electrical braid for Viking brand is modest and reduced weight. This makes it as convenient as possible for caring for small decorative flower beds, cutting and forming bushes, as well as aligning the grass cover of a house site.
The model is equipped with a durable electric engine, the internal spare parts of which are planted as tightly as possible. This provides protection of the details of the motor compartment from the hit of the remains of the mowed grass. To increase the power aggregate motorsurs, the manufacturer equipped it with additional protection against moisture and short circuit.
The trimmer for the grass is equipped with a branded tubella handle, which allows you to choose the optimal position of the handle with respect to the growth of the operator. The mechanism for changing the position of the handle and the installation of interchangeable rods is located on the housing of the factory engine, next to the engine on button,
To protect the bark of decorative trees and bushes into the design of the electrocos includes a restrictive plastic wheel. It is easy to remove it for repair or replacement.
Technical characteristics of a trimmer for the grass Viking TE 700:
- power. 0.23 kW;
- The operational speed of the motor is 7400 rpm;
- Moving diameter. up to 35 cm;
- length without cutting nozzle. 1.5 m.
The Elektokosovs package includes a branded TAP-N-GO head head with a semi-automatic adjustment of the cutting cord supply. The winding of the new fishing line takes place using Autocut C 5-2 technology-this allows you to safely and quickly season the coil in the field without the need to remove it from the trimmer for the grass.