Which end saw is suitable for installing doors. Bosch GCM 8 SJL

Which end saw to choose for door installation

The purpose of the end saw is already clear from its name. ending (in other words, transverse cutting) of long details: platbands, skirting boards, fillets, moldings, etc.D. The master unfamiliar with the end saw will probably be surprised. all of the listed details are perfectly cut by a circular saw, and if you need to cut off cleanly and at a certain angle, you can use a hacksaw and a stupid. So it is. it is a hacksaw and the knock is called to replace the end saw, for which it is sometimes called “electric stupid”.

Anyone who at least once had to combine platforms and plinths “in the mustache” knows that this is not as simple as it might seem at first glance. Without proper dexterity, even with the help of the same, to make the perfect cut at 45 degrees is not easy. And if the part is not flat, but complex shape? If this is a wide external platband or decor element and in any mock it simply does not fit? And if the front angle is not straight and it is necessary to cut it not at 45 degrees, but, say, under 57? And if you need to cut it at an angle to the vertical? Here, a hacksaw on a rotary bed will not help.

What can the end saw?

Thanks to these capabilities, the end of the saw is very popular among builders, joiners, masters-fins, masters of baguette workshops, furniture and wooden collections. And in the workshop of a home master, a household end will not be an extra tool.

Briefly about the main thing

For successful installation of the door, the master will need a set of tools.

These include electrical and battery devices, as well as mechanical devices for finalizing products before installing. Installation is also impossible without the use of consumables listed above.

Before starting work, it is necessary to finalize the opening, measure it, after which the installation is carried out in compliance with a detailed technological card.

What can the end saw?

Thanks to these capabilities, the end of the saw is very popular among builders, joiners, masters-fins, masters of baguette workshops, furniture and wooden collections. And in the workshop of a home master, a household end will not be an extra tool.

Power tool that may be needed

For comfortable work, you will need a power tool that is designed to simplify the door installation procedure. In addition, the use of various electrical specialized devices will significantly accelerate the work and makes it better.

So, consider the necessary power tool:

The end saw. This device allows you to cut various materials with the necessary angle. You can cut various elements of the box (for example, when connecting bars), platbands. In addition, such a saw can be a great substitution for a jigsaw, because it allows you to cut it longitudinally.

Milling mill. Allows you to make cutouts under the castle both in the front and back of the canvas, and from the end. In addition, is suitable for cutting wood for installing loops.

Electric. In order to cut various materials longitudinally without unnecessary troubles, an electrician is useful. Can be used instead of a end saw.

Electric drill. In order to pre.drill nests for screws.

Electric screwdriver. It is necessary in order to install various screws. In addition, a good electric screwdriver is quite capable of drilling holes using special drills.

Peorator. Allows you to drill holes in the walls made of solid materials that an electric screwdriver will not take. It can be concrete or brick. With it, you can knock down an excess solution/concrete from the doorway.

This is a list of those tools for installing doors that are likely to be needed in any situation. The purchase of most of them is quite justified, since they will definitely come in handy on the household. For example, with the help of an electric screwdriver, you can always easily tighten any bolt, and the pedorator will be needed to hang a picture or shelf on a load.bearing wall.

What can the end saw?

Thanks to these capabilities, the end of the saw is very popular among builders, joiners, masters-fins, masters of baguette workshops, furniture and wooden collections. And in the workshop of a home master, a household end will not be an extra tool.

Which end saw to choose for door installation

What is a end.saw end

The purpose of the end saw is already clear from its name. ending (in other words, transverse cutting) of long details: platbands, skirting boards, fillets, moldings, etc.D.

The master unfamiliar with the end saw will probably be surprised. all of the listed details are perfectly cut by a circular saw, and if you need to cut off cleanly and at a certain angle, you can use a hacksaw and a stupid.

So it is. it is a hacksaw and the knock is called to replace the end saw, for which it is sometimes called “electric stupid”.

Anyone who at least once had to combine platforms and plinths “in the mustache” knows that this is not as simple as it might seem at first glance. Without proper dexterity, even with the help of the same, to make the perfect cut at 45 degrees is not easy.

And if the part is not flat, but complex shape? If this is a wide external platband or decor element and in any mock it simply does not fit? And if the front angle is not straight and it is necessary to cut it not at 45 degrees, but, say, under 57? And if you need to cut it at an angle to the vertical? Here, a hacksaw on a rotary bed will not help.

What can the end saw?

Thanks to these capabilities, the end of the saw is very popular among builders, joiners, masters-fins, masters of baguette workshops, furniture and wooden collections. And in the workshop of a home master, a household end will not be an extra tool.

The device of the end saw

The device is not so complicated, but it is from what quality and from which material the hinge and beds, clamps and fixers are made, the quality of the cut and the price of the tool.

In inexpensive models, these parts can be made by stamping of sheet metal, have backlash and allow distortions, which can lead to inaccurate cut and noticeable gaps in the junction.

Dear models have parts of stainless steel and aluminum alloys, moving details in them move along clearly defined trajectories, without backlash, cliners and distortions. In addition, expensive models boast of additional capabilities and elements of configuration:

Characteristics of the end saw

One of the main parameters that determines the maximum diameter of the installed disk and, accordingly, the depth and width of the cut. It makes sense to choose power based on the alleged tasks. So, for the ending of interior platbands and skirting boards will be quite enough capacity of 1000-1400 watts.

If it is also supposed to end with wide moldings and cut the parts at an angle to the vertical (this increases the depth of the cut), the power of 1400-1800 watts will be optimal. The same capacity range will be the most suitable for a universal tool.

And finally, the construction tool will require the maximum disk diameter and the maximum engine power is from 2000 watts and more.

All other things being equal, it is better to choose a more powerful model. the engine power, of course, has some influence on the price of the end saw, but not as large as the fame of the manufacturer and the quality of manufacture of parts.

The weight increasing with power for this tool does not matter much. it is designed for a stationary installation.

Therefore, it is better to overpay a little for a power supply, which. in relation to electric motors. is never superfluous: it is well known that any electric motor will last much longer if it is not used at the limit of power.

The greater the maximum speed of the disk

, the cleaner and better (without chips and burrs) there will be a cut. At the same time, some materials cannot be treated at high speed. for example, plastic and polyurethane foaming moldings and skirting boards can melt when cutting at high speed. If such materials are supposed to be processed by the end saw, it should be chosen among the models with a speed of revolutions.

• External disk diameter
• Determines the maximum drill to drink. And, if the saw does not have a long mechanism, then
• I drank the width

Therefore, the choice of the diameter of the disk should be done according to the required depth and width of the cut. For most interior elements, enough depth of drank in 50 mm and 120 mm width is enough. External platbands and decor elements may require a depth of up to 100 and width up to 200 mm.

Igagul of the rotation determines the angle of the future connection “in the mustache”. To connect parts at a certain angle, each should be sawn off at half the angle. 45 degrees for connecting at a right angle, more than 45 for connecting parts at an acute angle and less than 45. for connecting at a blunt angle.

To prevent jerks when starting the engine, there is an option of smooth start

The best saw saw for circular saw

You should also pay attention to the gearbox, its presence and type.

Choice options

If you often use a stall and a hacksaw, but would like to refuse them by spending a minimum of money, choose basic models at a price of 4,000 to 8000. It will be much easier and more convenient to work with them than with a stupid and a hacksaw, but the quality of the cuts, most likely, if it becomes better, it is not much.

For most finishing work, there will be enough saw with engine power 1400-1800 W. Such are offered by software

For a baguette workshop and for finishing work using decorative elements, high power is not needed, but the quality of the assembly of the tool and the absence of backlash are important. Trusted tool manufacturers offer such saws on

Construction work will require models with the maximum disk diameter and a capacity of 1800 watts. Such will cost from 15,000 to 90,000.

TOP-8 ended saw on a tree equipped with a mechanism of the broach. Which end saw is better for installing doors

Which company to choose

Household circular. the perfect choice for home before buying you need to familiarize yourself with the rating of the best manufacturers of circular saws. Among companies that are popular with customers, we can highlight:

There are other manufacturers of circulars, but they are less known.

The device of the end saw.

The device is not so complicated, but it is from what quality and from which material the hinge and beds, clamps and fixers are made, the quality of the cut and the price of the tool. In inexpensive models, these parts can be made by stamping of sheet metal, have backlash and allow distortions, which can lead to inaccurate cut and noticeable gaps in the junction. Dear models have parts of stainless steel and aluminum alloys, moving details in them move along clearly defined trajectories, without backlash, cliners and distortions. In addition, expensive models boast of additional capabilities and elements of configuration:

Zubrov ZPT-210-1400 l

When you need to buy a good end for the home. this model will definitely become the first in the list of applicants. The small.sized desktop unit of the household is designed for work with blanks made of wood with a thickness of not more than 60 mm. This is a good, budget saw without a broach equipped with a laser marker, clamps for fixing the blanks and a 210 mm saw disk. The verified design of the end allows you to set the angle of sawing without error and achieve an accurate cut. The simplicity of operation was achieved due to easy setting up the unit, and high.quality cut. due to good power and high speed of revolutions. The end will be a great solution when buying a tool for wood work in the country, as well as to build various household structures in a personal plot. With decent quality manufacturing and affordable cost, this popular saw is difficult to detect objective shortcomings.

• The optimal combination of power and speed speed
• reliable, time.tested design
• Laser markup
• The ability to connect to a vacuum cleaner
• Compact dimensions
• The presence of a shaft lock

Rating of models of expensive segment (from 50,000)

Dewalt DW717XPS

The ideal choice for professional work on the construction site and in the furniture production workshop. The possibility of turning the saw block left and right up to 50 ° and tilt to the left to 48 ° and to the right to 3 °. The XPS system allows you to see a fishing line for a cutting trimmer even with bright sunlight. Well suited for the installation of interior doors and arches.

Bosch GCM 12 GDL

Professional saw for stationary sawing wooden blanks. Can work with an aluminum profile. Diameter of the saw disk. 305 mm. The large weight of the saw (32 kg) provides its stability. The accuracy of the cut is provided by a laser with two rays.

Metabo KGS 315 Plus

Professional tool for working with woodwork. Has the best cutting ability in his segment. The saw can be extended, therefore, suitable for sawing large.sized blanks. Perhaps sawing at an angle up to 45 ° in both directions.

TOP-8 ended saw on a tree equipped with a mechanism of the broach. Which end saw is better for installing doors

Pile saw: device, purpose and abilities Electronic end saw: aspects and aspects of the choice of discs for the end saw: what is the difference they have

Cutting the finishing materials at an angle is a task, just right, complex, and in fact, all people with its decision have a confusion. And by and large, most of the decoration materials asks for such an approach to their own installation, for example, a lining, skirting boards, baguettes and, in addition, metal structures collected from a profile pipe. Then there are many such materials, and their diagonal cuts have to be solved, with even very highest accuracy. Further together with the Stroisovety website.Org We will study such a tool as a end saw that allows you to cope with the task of diagonal trimming. We will get acquainted with the device of this tool, aspects of the assessment, which will allow you to purchase a model suitable at work and deal with saw disks used simultaneously with the inventory.

A hand.handed saw has a narrow purpose, and it is unlikely that you will succeed in dissolving the boards with its help. Her tasks are few others. she can only do short cuts. With its help, you can cut the board in half, level its end or cut off the end of the board at a certain angle. About the principle, and all the others that she can, however, believe me, is a lot of other saw equipment with such tasks cooles much more terrible. Ah to sell, completely forgot that apart from the wood, depending on the applied equipment, the end saw works with soft metals, plastic and as needed with thin.leaved iron, or rather with a profile made with its use.

Read also: universal turning milling machine

The end universal saw has a rather complex design-it consists of 2 main nodes, which in no way differ in the simplicity of the design. This is a bed, a turning table and a movable cutting head with a massive electronic engine are assigned to the busy table.

• Stanger with a turning table. You, these two parts do not have the basis for that to do without each other. On the bed itself there is a guide that provides a fixed position of the workpiece. The entire table for the end saw can be rotated relative to the guide during 90 ° (45 ° V one side and 45 ° in the other direction), providing this method with an ordinary pruning of the workpiece in each direction without reinstalling the part.
• Cutting head. Installed specifically on the rotary table. it changes its professionalism, together with the child. For convenience, when working on the side of the rotary table, a graduated scale is applied on the bed. combining the table label with a certain value of degrees, cuts at least some angle. Not everything here is far. the head itself, or rather its cutting part, can bend to the left and to the right, providing them with the inclined cut. In the bulk, myth is tilt in one or 2 fixed positions (30 ° and 45 ° in any direction). Also, some models are equipped with a special long mechanism. The end saw with the length allows you to cut the workpieces of much larger width than its usual fellow.

What design does the end saw have

The question of how to choose a end saw is best done, adhering to 5 small rules.

First you need to be determined with its purpose and operation criteria. Why is it needed for you? What work, in, in what quantity do you intend to create with its help? If you purchase a end saw for use at home and do not even plan to do difficult operations, you can do with a conventional equipment with the basic configuration of additional functions. In that case, we are talking about the professional use of the end saw and its daily use, then what, you need to choose an extended version of this tool with a full set of additional abilities. You can see the option of acquiring the so.called combined end saw, which is equipped with an additional desktop at the top of the cutting head, allowing it to use it as a stationary circular saw.

• 2nd where you need to find out, this is for the size of the disks used. It is important not so much the diameter of the installed equipment, on which the cut depth depends on all parameters, but at the same time its thickness, which affects the type of material processed by the end of the end. A good option for domestic implementation is a machine calculated under a disc of 200mm. For a professional use, it is better to get a machine with a diameter of 250mm.
• Safety of work. This considerable hearing tool without appropriate protection becomes a very unsafe assistant. be sure to carefully examine the presence of protective covers, which are made one hundred percent to close the disk even during the cutting and protection of the protection against accidental inclusion.
• Weight and dimensions of the tool. Essentially, the end saw is a portable device. it is not desirable. Today, since they started talking about convenience in work, carefully study the ease of the course of all its parts. pay increased attention to the cutting head. A very tight course of this part of the tool will be rapidly tiring the operator of the end saw.
• And the latter is ergonomics, the tool is expected to be comfortable in work.

What, making the choice of end saw, it will be useful to take into account the power of this tool, and of course the speed of rotation of the disk. In the bulk, these values ​​are designed by the manufacturer and are good. In a household tool, the power will be lower than that of the prof, but the speed of rotation of the disk is almost always monotonous, which is caused by the need to do an unsuccessful and even cut.

There are not so many differences between the disks that are used on the end saw and the main ones there are planting and external dialects, also the geometry of the cutting tooth. If with the size of the disks what remains to make our client to a certain extent is clear (you like the landing hole more or 25mm or 30mm, and their external diameter is 210, 250 and 305mm), then here you should figure out more details with the geometry of the tooth.

And a few words about enterprises that create end saws on wood. The favorites in the production of all electronic tools are Bosch and Makita, and their end saws are no exception. Also, practically the tools of Metabo, Hitachi, Dewalt showed themselves well. If we talk about end saws, then we note the tools of the corvette. Then, there is something to choose from. the main thing is not to count out with abilities.

Optional equipment

The following points can be attributed to additional equipment:

For a high.quality and correct installation of the installation door, you must stock up on the whole list of tools in advance. All this will help to significantly facilitate the installation process. Each of the above materials and tools must meet the requirements for quality and reliability. Only in this case, one can guaranteed to count on the long.term operation of the interior door.

Voted more than 414 times, average rating 5

Unfortunately there are no Комментарии и мнения владельцев or reviews yet, but you can leave your own.

We recommend reading

Installation of the door mechanisms for opening interior doors is known that the door is able to make changes in the stylistic design.

Installation of the door of the entrance vestibule in a private house: ideas and recommendations for the construction of the vestibule are a small room designed for.

Installation of the door that first: laminate or interior door? Features of repair work, the repair implies the implementation of certain actions that depend on a friend.

Installation of the door manufacturing doors-wrapping doors at home with your own hands How to make an interior-dick door with your own hands? Collect the cape door.

TOP-5 the best ended saws without a broach

Ending devices not equipped with a length are less functional. But they differ in greater compactness, and their price is usually lower.

Einhell Th-Ms 2112

The unit for cutting blanks at an angle of 45 ° shows a power of 1600 watts. It is equipped with a 210 mm disk with a maximum cut width of 120 mm, makes 5000 revolutions within a minute. Equipped with a protective casing and vacuum cleaner.

Bosch GTM 12

Dear universal saw is not equipped with a length, but offers a lot of other valuable opportunities. In particular, the model can be used as a circular tool with a cut depth of 51 mm. With a end cut, the disk is immersed to 95 mm and 150 mm wide in width. The model supports a 48 ° rotation and tilt to the left by 47 °.

Makita LH1201FL

A good end tool with a sawing table is equipped with a 1650 W engine and 305 mm disks. Makes a cut 95 mm with a width of 155 mm.

Dewalt DW714

One of the best end saws for installing doors with a 1650 W engine and 254 mm disk. Has a smooth adjustment of rotation and inclination in both directions. Among the advantages. a fairly smooth start of the unit and electrodynamic brake.

Metabo KS 216 m lasercut

Inexpensive saw is not equipped with a length and provides a cut up to 60 mm. The speed is 5000 per minute, the power of the unit is average. 1350 W. A laser pointer is provided, and it is almost not clogged with dust in the process.

The rating of end saw shows a wide variety of devices. budget and expensive, with a length and without it. To choose the right tool for home and workshop, you need to study the reviews and characteristics of popular models.

I am engaged in installing doors and I use Makita LH1040F at work, this is one of the most budget ends. The tool is reliable and accurate, I have no complaints. Most importantly. when cutting the workpiece, there is no backlash that can spoil the cut. The lines are even and neat.

A couple of years ago he himself changed the doors in the apartment and, on this occasion, acquired an inexpensive end saw Einhell Th-Ms 2112. The tool turned out to be convenient, allowed to cut elements of the door box at an angle without unnecessary effort. I will soon make repairs in the country, the unit will come in handy again, and it will be easier to use it with experience.

I drank with a broach. that this is and the principle of action

The end saw with the length is relevant when working with lining and when laying out skirting boards and baguits, as well as with carving of narrow boards, slats, bars.

The base includes the handles with the switch and a working circle with an electric motor, fixed on the basis.

The functional module is mounted on parallel rails, which ensures the free movement of the saw disk directly during operation.

Thanks to the long mechanism, it is possible to work even with the widest boards in one entry without wasting extra time.

Which company to choose?

Metabo KGS 305 m

The next heroine of our top is Metabo KGS 305 m. This end saw has a very high cut productivity thanks to an extremely powerful universal engine and a large saw disc. It can make a cut to a depth of 105 millimeters and in width up to 305 millimeters, and its table and saw discs can deviate 47 degrees.

So with such characteristics, this saw will be an excellent acquisition for various workshops and furniture companies, allowing you to cut blanks of various shapes and sizes in large quantities. Among the features of this saw, it is worth noting the rapid precision tuning the most common angles through fixation points, an effective divert of sawdust through the built.in funnel of the sawdust, the clamp for the material for reliable fixation of the workpiece from above or in front, as well as the limiting emphasis for simple excavation of the grooves.

In addition, for a safe cut in this device, high stops are used, shifted to the sides, and for working with long blanks there are advanced expansion of the table. As users note, the saw is very convenient in work: it is clearly visible each scale and control elements, plus there is a backlight for a more accurate cut.

And also, thanks to the locking of the spindle, the replacement of the saw canvas on this device can be done without removing the protective casing, which significantly accelerates the process of replacing the tool. In general, if you need a powerful and easy to control end saw, I recommend this model to buy.

• Power: 2000 W.
• 3700 rpm.
• Reza speed: 60 m/s.
• Size of the cut 90⁰: 305×105 mm.
• Dispersed size 45⁰: 205×67 mm.
• Cable length: 2 m.
• Dimensions: 850 x 515 x 615 mm.
• Weight: 19.6 kg.

Metabo KS 216 m lasercut

The next heroine of our top is Metabo KS 216 M Lasercut. It is notable for the high accuracy of the cut, which the laser installed in it provides it. In addition, it has many other useful features that make work for such a tool more comfortable.

The saw has a backlighting the working area and a bag for collecting sawdust. The saw head rotates freely, and its slope to the left will open an additional corner range for cut. Precise setting of angles occurs quickly, through fixing points. And thanks to the possibility of blocking the spindle on this saw, it will be possible to replace the disk without removing the casing.

Also, the design of this unit provides for high supports that are shifted to the sides to increase the level of security. And also, each scale and control elements of this device are visible from the working position, so it will not be difficult to understand management.

The saw case is made of aluminum, so it is quite strong and at the same time light, which allows one person to transfer it without problems. The performance of such a saw will be quite enough for use in personal farming and small workshops.