DIY Brand Lawders. Nazadka for a trimmer for grass drill • CIMFLOK.COM

Homemade attachment for a trimmer for grass for weeding potatoes

People are increasingly trying to move away from manual cultivation of potatoes. This brings a lot of health problems, takes time. Landing, irrigation, as well as weeding, are increasingly becoming mechanized.

Do I need potatoes? Several facts:

Many people think that they will grow up, once they planted. But with all the variety of weed grass, it is not able to fully develop. In the early stages of growth and the formation of the bush, it is very important that the garden is clean, otherwise harmful vegetation will ruin the potatoes and will not allow the vegetable to gain momentum in full force.
Another fact why weeding is to carry out is stretching of nutrients from the soil. Rhizome, creeping, with abundant green mass of grass will absorb humus much faster than culture develops.
Weeds are a haven for the fruitful development of some insect pests, which in the fall lay their eggs on it, and in the spring are born and begin to earnly eat young potatoes.
With rapid growth, weeds will stand up with a “carpet”, then the potatoes will not receive in full light and air.

Usually weeding the garden is carried out several times a season, and until the moment when the bushes are getting stronger, rise, then they themselves will be able to inhibit weeds growing under them.

Reviews

Nadezhda, 52 years old: We have a large garden for planting potatoes. Therefore, you have to use mechanisms during the weeding. Otherwise, just can’t cope with such a area of landings. For weeding, we use one.axle tractor. He greatly simplifies the work.

Sergey, 42 years old: we have a small area for planting a small. Therefore, there is no need to use a one.axle tractor or a trimmer for grass. We are fully cope with ordinary pulls. This is convenient, you can immediately hill the bushes.

I was weeding when growing potatoes is a mandatory event. It eliminates weeds, allowing plants to receive the right amount of sunlight and air at the initial stage. With a large area of the site, it is better to use mechanized processing methods. If the area of the landings is small, the potatoes are torn by ordinary pulls.

Advantages and disadvantages of the nozzle-cultivator

The prefix-cultivator for a trimmer for grass is becoming more and more popular among customers. Here are some advantages of this device:

Simplicity in maintenance.
Noticeably cheaper in comparison with equipment for a motorbike.
Such a cultivator is simply indispensable for those people who have many greenhouses. Using this device, you can quickly loosen the ground in the greenhouse and saturate it with oxygen.
The design is made very high quality, which makes it possible to use the cultivator for a long time.
Protective shield. Protects from the garbage of the operator.
Each nozzle weights the structure, with prolonged work, a person will feel fatigue.
You need to select a nozzle and a trimmer for grass with the same connecting nodes.
Due to vibration, control the button of the trimmer switching for grass and holding a difficult unit is often uncomfortable.

Important! The model of the cultivator nozzle should be produced by the same company as the trimmer for the grass. If the loosening tool is produced by Husqvarna, and the lawn mower is Oleo-Mac, then it will not work to process the soil: the nozzle simply cannot be attached

Features of work by nozzle

Any nozzle-cultivator for a trimmer for grass significantly increases the weight of the entire device assembly (at least 5 6 kg). Therefore, long.term work with such a tool is not possible for everyone. The calculation must also include mechanical restrictions on the power of the trimmer drive for grass. If the engine is designed for a power of not more than 1,500 watts, then the cultivator can only be processed by regularly loosened soil, or limit yourself to hovering breasts, potato bushes, etc. P.

Since the drive of gasoline trimmers is located behind the worker, and the drive bar is quite long, vibrations constantly occur in the process of cultivation. Their value is determined by both the length of the bar and the change in the load on the wheels or cutters. These vibrations through the shoulder belt are transmitted to the user’s hands, so it is not always convenient to control the trimmer button to turn on the trimmer for grass and hold the canopy. Therefore, prolonged cultivation of soil using a cultivator nozzle is unsafe for health.

But not everything is so bad: the mobility of a gasoline trimmer for grass allows you to easily process the soil in the rowles, and the absence of wheels on a hinged cultivator does not damage plants on the beds.

Cultivator nozzle “does not like” creamy soil, and at the first introduction into such soil, the bar abruptly discards. Therefore, disk cultivators are equipped with a safety casing (gear mills are more likely to bend than break, although in this case a low protective shield from the legs would not have prevented). The presence of a safety screen worsens the visibility of a working with a cultivator.

Nazadka-cultivator for a trimmer for grass: nuances when working and mounting methods

What is the device?

In a set of interchangeable nozzles, Motokos, manufacturers have recently been increasingly mentioning such a device as a cultivator or proof.

Unlike classic nozzles in the form of discs for mowing grass or mowing head for a synthetic fishing line for a trimmer, the cultivator is designed to work directly with the soil.

A trimmer nozzle for grass is designed to loosen the soil in the processed areas and partially in places where there is a turf cover.

A trimmer nozzle for grass was weeding potatoes

A trimmer nozzle for weeding is put on a bar instead of a lower gearbox. Converting a trimmer for grass into a prosperger is carried out within 1-2 minutes and does not require additional tools and equipment. The whole process is carried out using hexagonal keys included in the tool of the tool motor.

The use of motorcycles greatly facilitates the weeding

Rivets for rivets: types, dimensions, application

The case of the device collapsible. The housing has special devices for adding lubrication. Corps material. aluminum alloy, cutters are made of steel. Shaft on which milling cutters, forged, gear bronze.

The principle of operation of the trimmer for the grass is simple. from a two.stroke engine through the clutch, rotational movement is transmitted to the shaft in the bar. Further, through the shaft, the movement enters the connecting shaft with a worm mechanism, from which a working shaft with mills begins to rotate through a bronze gear.

The speed revolutions are adjusted by adjusting the number of engine speeds through the gas handle. the more the carburetor shutter opens, the higher the rotation speed of the milling.

From corner grinders

Most often, a homemade electric trimmer for grass is made on the basis of a conventional corner grinding grinder, which is available to every home master. This tool is almost perfect for remaking into a trimmer for grass.

It has a larger power than store machines and more than a minute.

In addition, the standard nut used in the corner grinding for fixing the disks already has holes through which it is easy to insert a fishing line for a trimmer (cord).

So, there are many options from which to make a bar (holding). The simplest is the longer a wooden holder than for a shovel. To the end of it, an angular grinder is attached at the right angle with a conventional tape. The fishing line for the trimmer is inserted into 2 holes of the nut, after which it is twisted. Thus, in a few minutes you get a trimmer for grass, which can be mowed without problems.

For the safety of the operation of a home.made apparatus, you can improve it by making a protective casing (how to do this, will be considered later).

For advanced masters with a welding machine, you can advise a more advanced design to fix the angular grinder and protective casing. It is made from an aluminum tube (serves as a holder) and a metal square profile. Looking at the picture below, you can understand the principle of manufacturing the holder.

The corner grinder is fixed on the holder with bolts inserted into the holes that are designed to attach the handle to the device.

The following photo shows how this design looks below.

How to make a pipe bastard with your own hands: examples of the best self.proceeds

Next, the “native” casing of the corner grinder is removed, and instead of the disk, either a fishing line for a trimmer or a metal disk knife is installed.

By the way, you can fasten the holes for fastening the handle (bar) itself, when you want to make a simple trimmer for grass, which is easily assembled and is also easily versed if you need to use the corner grinding for its intended purpose.

To make it more convenient to hold a trimmer for grass in his hands during work, and it did not rotate around the axis of the bar, you can attach a side hand made of a bent pipe to it.

The principle and effectiveness of the weeding method

Weeding as a cultivator processing aims to destroy the weed by weed by exhausting. plants after processing need time in order to recover and gain the desired force. At this time, potatoes or other vegetable crops will be able to continue successful growth.

The weeding of potatoes with a trimmer is usually carried out by three methods:

sparing weed grass with a mowing head or disk nozzle;
cultivator processing with a drum nozzle;
Cultivator processing with saber or disk nozzles.

Speasing is usually carried out when weeds reach a height of 7-10 cm. In this case, only the part that is above the ground is mowed, and the roots remain in an untouched state. Usually after this begins rapid growth of green mass, so that the effectiveness of such processing is small.

When the weeding with a trimmer is carried out using a drum cutter, the roots of weeds are also processed.

A big plus of this method is that the upper soil layer is scared, and thus increases the air exchange of soil.

The effectiveness of this method is much higher than a simple weeding manually or work by a mechanical cultivator. The drum mill allows you to loosen the soil to a depth of 3-5 cm.

When using saber or disk nozzles, effectiveness increases even more-the processing depth increases to 5-7 cm. At the same time, the roots of plants, like the green mass of weeds, are repeatedly grinded, which contributes to the rapid decomposition of plant residues in the ground.

After such a weeding, repeated weeding is usually carried out after at least 10-14 days. True, there is one nuance that needs to be taken into account. when working with drum mills, the width of the processed strip is about 30 cm.

, But when working with saber or disk mills, the width is no more than 15-20 cm.

Pros and cons of the method

Weeding a trimmer of the garden, and even more so the site on which the potato grows has its own characteristics and specifics. First of all, you need to pay attention that for work you need to choose the right tool.

It is preferable to choose powerful four.stroke engines as a working engine. Such motorcycles have a lower gasoline consumption and greater performance compared to two.stroke.

Cultivator nozzles for benzos. technical specifications

Thanks to the modern garden electric and gasoline tools, many routine problems can be solved today throughout the calendar year. Each such tool can be supplemented with special nozzles. It is nozzles that will be able to help both in the garden and in the personal plot.

Cultivator nozzle

A gas-cultivator nozzle for grass is used for loosening soil in small areas, such as a flower bed, a greenhouse or around bushes and trees. The tool can be:

The difference in these two nodes only in their design and names, the essence of the work performed is the same is to loosen the ground.

Important! Gear models are less weighty, therefore, it is best to process light soils, unlike disk.

Such a nozzle from the engine works with a special rod (sold separately). There are slots on the rod, they can be from 7 to 9. That is, you need to know exactly what nozzle to buy, since it may not come from one model to another.

When the cutters and discs are fixed with the help of slots, the cutting organs will shift freely, you can loosen the soil to a width of 20-25 centimeters.

note! Long beds are more convenient to process than short. In the first case, you need to do less turns.

When choosing a nozzle, it is necessary to take into account the power of a trimmer for grass. If the power of the device is not more than 1,500 watts, then only loosened land will be processed. For example, you can only cumber potatoes.

The disadvantages of the design include the fact that the soil will not work deeply deeper. Only the top layer can be processed, and then if it is plowed recently. On solid grounds, such a cultivator prefix will simply “jump”, it does not like the soil. And pressing it is denser to the ground either, the bar will spring and bend, which will lead to a breakdown of a trimmer for grass.

But still sometimes it makes sense to purchase such a nozzle. Given it sometimes not a small price, many craftsmen decide to make a cultivator for motorcycles on their own.

Universal cultivator for a trimmer for grass with your own hands

If there is a summer cottage, then the presence of a cultivator’s nozzle will greatly facilitate the work when processing the soil (when working, a lot of effort and time are spent). Special factory equipment is not cheap, which means that you need to assemble the nozzle- cultivator for motorcycles on your own.

The following is a simple example of how to make a cultivator based on a trimmer for grass. To do this, you need the following tools and materials:

corner grinder with metal disks;
drill in the kit with drills;
welding machine;
electrodes;
Kryzuvka for metal;
sandpaper;
Garden forces;
steel tube for shaft trimmer for grass;
hammer, flat trays, roulette and so on;
Metal sheet.

Nozzle cultivator on a motorcycle (lawn mower)

Production begins with a loosening element. To do this, you need to bend the rods of garden forks. Their length should be about 15 cm.

Then the working nozzle is made. To do this, the teeth of the foriles must be flattened to a width of 1 cm, then the resulting mills should be sharpened with emery. After that, cut a circle of durable metal with a diameter of about 10 cm and weld cutters to it, it is best only 3 pieces.

The next step will be the attachment of cutters for weeding on a trimmer for grass. If there is a reverse thread at the end of the trimmer shaft for the grass, then the resulting part is simply screwed. It is enough to weld a pipe with a nut to the cutter. Everything, a trimmer from a do.it.yourself trimmer is ready.

Universal plow. soil processing in any areas

Cultivator for motorcycles

Before making a purchase of this nozzle, you need to decide on its type. To date, the following types of special nozzles are presented in the consumer market:

Cultivator nozzles for benzos: you can perform plowing of the earth on the beds or in greenhouses;
Highway nozzle on a motorcycle: an indispensable nozzle in the garden for cutting knots and excess branches;
Freak nozzle on a motorcycle to trim the bushes.

This is a minimum set of special nozzles that can become reliable assistants on a personal plot and summer cottage.

Trammer trammer for grass

For many summer residents of weeding weeds, it is a problem especially if the site has been purchased recently, and before that it has not been processed a couple of years. And often gardeners dream of a mechanical pull. It will not be difficult to make it if there is a trimmer for grass. Such a nozzle is attached to the trimmer according to the principle of a trimmer knife.

Production of nozzles-straps

From a dense sheet of iron (better stainless steel), cut a circle, there should be a landing hole in the center, and holes must be drilled on the entire surface. To fix the sharpened bolts with a washer and nuts in them. It turns out a design resembling a hedgehog. These very thorns-bolts will be weeding.

Advantages and disadvantages of the nozzle-cultivator

The prefix-cultivator for a trimmer for grass is becoming more and more popular among customers. Here are some advantages of this device:

Simplicity in maintenance.
Noticeably cheaper in comparison with equipment for a motorbike.
Such a cultivator is simply indispensable for those people who have many greenhouses. Using this device, you can quickly loosen the ground in the greenhouse and saturate it with oxygen.
The design is made very high quality, which makes it possible to use the cultivator for a long time.
Protective shield. Protects from the garbage of the operator.

There are not so many disadvantages:

Each nozzle weights the structure, with prolonged work, a person will feel fatigue.
You need to select a nozzle and a trimmer for grass with the same connecting nodes.
Due to vibration, control the button of the trimmer switching for grass and holding a difficult unit is often uncomfortable.

Do.it.yourself trimmer cultivator: device features, pluses and cons

Earth cultivation, in particular loosening of plowed soil, inter.row processing, removal of weeds, etc.P., requires an application of quite significant physical efforts and takes a lot of time.

This is especially noticeable when it is necessary to process the land plot of large area.

The manual work will help to greatly facilitate the nozzle-cultivator to the trimmer, made independently or purchased in a specialized store.

Design and options for attaching a cultivator to a trimmer

Trimmer for grass. a type of manual agricultural motorized tool. The main purpose is to mow grass. However, a mini-cultivator can be made from it. To do this, just purchase a finished nozzle or make it yourself.

The attacker for a trimmer for grass differs in the type of actuator used. The performance and quality of soil processing depends on the cutting tool. Cultivator nozzles for motorcycles are divided into two types:

Toer. In such a device, the cutting mechanism is cutters located on both sides of the drive shaft. Constructively represents several pointed knives bent at a certain angle. The weight of the gear nozzle can reach 6 kg.
disk. For this type of nozzle, instead of milling, cutting discs are used on which knives are fixed. The blades are located at an angle relative to the disks.

To protect the user, both the gear and the disk nozzle have a protective casing, thanks to which the earth does not fly apart during its processing.

Such agricultural devices can be installed on a trimmer for grass in three ways:

Cultivator nozzle increases the mass of a trimmer for grass as a whole by 5-6 kg. Therefore, prolonged work with a motorcycle equipped with such a mechanism becomes more labor.intensive.

Principle of operation

The torque from the engine of the trimmer for the grass is transmitted to the nozzle-cultivator through the shaft installed in a special rod. Below the rod there are 7 or 9 slots for attaching a cutting tool. Therefore, the unit under consideration is not a universal.

The slotted method of attaching actuator mechanisms to the shaft is very convenient, as it provides for free movement of cutters or disks. Due to this, the width of the soil capture during loosening reaches 200-250 mm. This fastening option helps to reduce the amplitude of the unit moving during operation, which allows you to reduce the distance between the beds.

It is important to consider restrictions on the power of power plant. If the power of the unit is 1.5 kW or less, then the device can only be used to loosen the soil or hilling of the beds.

Advantages and disadvantages of using this nozzle

Like any equipment, a cultivator from a lawn mower has advantages and disadvantages.
All the advantages and disadvantages in working with a cultivator’s nozzles for trimmers you can find out by watching
Pros:

excellent mobility (achieved due to the lack of wheels) allows you to work on rowers and beds without afraid to damage planted plants;
well suited for loosening soil, which improves the water, air and thermal soil, improves the supply of plant roots with oxygen;
easily and quickly removes weeds;
Ease of maintenance;
high speed of rotation of cutting tools provides high performance;
Suitable for work not only on a large and even surface, but also in greenhouses, as well as when processing flower beds and flower beds;
Small cost (compared to additional tools for a walk.behind tractor or motorbike).
Some nozzles increase motorcycles by 5-6 kg;
When working with such a device, it is impossible to press it close to the soil (too strong pressure can cause failure of the mechanism or deformation of the bar);
the inability to work on solid ground (the knives will only scratch the surface of the earth without penetrating deeper);
When processing the soil of vibration through the shoulder belt, it is transmitted to the user’s hands, making it difficult to work for a long time.

Long work using a cultivator nozzle can lead to a deterioration in health, t.to. Using this nozzle, the vibration transmitted to the human body increases greatly.

As you can see, the advantages outweigh the disadvantages. And those who think about the acquisition or manufacture of such a nozzle, just take into account the indicated disadvantages and apply the cultivator made from the trimmer for the grass for its intended purpose and not perceive it as a full.fledged uniform tractor. Next, we consider with examples how to make a cultivator with your own hands from a trimmer for grass, with step.by.step instructions.

Necessary tools and materials for manufacturing

Making a cultivator from a trimmer for grass with your own hands, the process is quite simple and does not take much time. However, before starting work, you should still prepare the necessary materials and tools.

Nazadka-cultivator for a trimmer for grass: nuances when working and mounting methods

What is the device?

In a set of interchangeable nozzles, Motokos, manufacturers have recently been increasingly mentioning such a device as a cultivator or proof.

Unlike classic nozzles in the form of discs for mowing grass or mowing head for a synthetic fishing line for a trimmer, the cultivator is designed to work directly with the soil.

A trimmer nozzle for grass is designed to loosen the soil in the processed areas and partially in places where there is a turf cover.

A trimmer nozzle for grass was weeding potatoes

A trimmer nozzle for weeding is put on a bar instead of a lower gearbox. Converting a trimmer for grass into a prosperger is carried out within 1-2 minutes and does not require additional tools and equipment. The whole process is carried out using hexagonal keys included in the tool of the tool motor.

The use of motorcycles greatly facilitates the weeding

Rivets for rivets: types, dimensions, application

The speed revolutions are adjusted by adjusting the number of engine speeds through the gas handle. the more the carburetor shutter opens, the higher the rotation speed of the milling.

From corner grinders

Most often, a homemade electric trimmer for grass is made on the basis of a conventional corner grinding grinder, which is available to every home master. This tool is almost perfect for remaking into a trimmer for grass.

It has a larger power than store machines and more than a minute.

In addition, the standard nut used in the corner grinding for fixing the disks already has holes through which it is easy to insert a fishing line for a trimmer (cord).

So, there are many options from which to make a bar (holding). The simplest is the longer a wooden holder than for a shovel. To the end of it, an angular grinder is attached at the right angle with a conventional tape. The fishing line for the trimmer is inserted into 2 holes of the nut, after which it is twisted. Thus, in a few minutes you get a trimmer for grass, which can be mowed without problems.

For the safety of the operation of a home.made apparatus, you can improve it by making a protective casing (how to do this, will be considered later).

The corner grinder is fixed on the holder with bolts inserted into the holes that are designed to attach the handle to the device.

The following photo shows how this design looks below.

How to make a pipe bastard with your own hands: examples of the best self.proceeds

Next, the “native” casing of the corner grinder is removed, and instead of the disk, either a fishing line for a trimmer or a metal disk knife is installed.

By the way, you can fasten the holes for fastening the handle (bar) itself, when you want to make a simple trimmer for grass, which is easily assembled and is also easily versed if you need to use the corner grinding for its intended purpose.

To make it more convenient to hold a trimmer for grass in his hands during work, and it did not rotate around the axis of the bar, you can attach a side hand made of a bent pipe to it.

The principle and effectiveness of the weeding method

The weeding of potatoes with a trimmer is usually carried out by three methods:

sparing weed grass with a mowing head or disk nozzle;
cultivator processing with a drum nozzle;
Cultivator processing with saber or disk nozzles.

When the weeding with a trimmer is carried out using a drum cutter, the roots of weeds are also processed.

A big plus of this method is that the upper soil layer is scared, and thus increases the air exchange of soil.

The effectiveness of this method is much higher than a simple weeding manually or work by a mechanical cultivator. The drum mill allows you to loosen the soil to a depth of 3-5 cm.

How To make Homemade Grass Trimmer Easy and Fast

, But when working with saber or disk mills, the width is no more than 15-20 cm.

Pros and cons of the method

It is preferable to choose powerful four.stroke engines as a working engine. Such motorcycles have a lower gasoline consumption and greater performance compared to two.stroke.

Nozzle cultivator on a trimmer for grass gasoline

The industry offers many different additional nozzles for a trimmer for grass that facilitate work in the garden. It can be a blower, a grinder, a bureau, a cultivator and others. This article will talk about the nozzle-cultivator.

A gas-cultivator nozzle for grass is used for loosening soil in small areas, such as a flower bed, a greenhouse or around bushes and trees. The tool can be:

The difference in these two nodes only in their design and names, the essence of the work performed is the same is to loosen the ground.

Important! Gear models are less weighty, therefore, it is best to process light soils, unlike disk.

When the cutters and discs are fixed with the help of slots, the cutting organs will shift freely, you can loosen the soil to a width of 20-25 centimeters.

note! Long beds are more convenient to process than short. In the first case, you need to do less turns.

But still sometimes it makes sense to purchase such a nozzle. Given it sometimes not a small price, many craftsmen decide to make a cultivator for motorcycles on their own.

Universal cultivator for a trimmer for grass with your own hands

If there is a summer cottage, then the presence of a cultivator’s nozzle will greatly facilitate the work when processing the soil (when working, a lot of effort and time is spent). Special factory equipment is not cheap, which means that you need to assemble the nozzle- cultivator for motorcycles on your own.

The following is a simple example of how to make a cultivator based on a trimmer for grass. To do this, you need the following tools and materials:

corner grinder with metal disks;
drill in the kit with drills;
welding machine;
electrodes;
Kryzuvka for metal;
sandpaper;
Garden forces;
steel tube for shaft trimmer for grass;
hammer, flat trays, roulette and so on;
Metal sheet.

Nozzle cultivator on a motorcycle (lawn mower)

Production begins with a loosening element. To do this, you need to bend the rods of garden forks. Their length should be about 15 cm.

The next step will be the attachment of cutters for weeding on a trimmer for grass. If there is a reverse thread at the end of the trimmer shaft for the grass, then the resulting part is simply screwed. It is enough to weld a pipe with a nut to the cutter. Everything, a trimmer from a do.it.yourself trimmer is ready.

Pros and cons of the potato weeding with trimmer

The advantages of using the technical device are:

light weeding that does not require great physical efforts, which makes it possible to do work for older people, adolescents, women;
a small amount of time spent;
Multifunctionality of the device: simultaneously with weeding, loosening, soil oxygen, mixing soil with fertilizers are carried out;
When using some nozzles, weeds grow very slowly subsequently: for example, after processing a rounded fishing line in a trimmer head, the vegetation does not run for a long time;
The work is facilitated by the fact that cut grass does not need to take away potatoes from the bed. it will become an additional fertilizer and an excellent mulching agent.
the inability to carry out it on heavy, clay soils;
the need to use only for small, not yet rooted weeds;
Weeding potatoes can only be carried out after the appearance of seedlings, however, the grass may already be rooted by this time;
to hill potatoes without a trap and the usual manual processing method will not work.

Design and fastening options

Modern nozzles-cultivators can be performed in two performance:

Toothache, in which cutters are located sequentially on the shaft;

DIY Grass Trimmer

Disk, when several cutting discs act as cutting organs.

The torque is transmitted to the nozzle-cultivator from the engine thanks to the shaft, which is combined by means of a special bar. The latter, unfortunately, often has to buy separately.

The unit under consideration cannot be called interchangeable, while the number of slots on the end part of the bar may vary from 7 to 9. Based on this, buying a cultivator nozzle, for example, from Oleo-Mac it is worth knowing that it is not suitable for working with the Husqvarna trimmer, as vainly.

The slotted method of fixing the cutter or disks to the shaft provides for a free displacement of the cutting organs, so that the soil will be loosened with a fairly wide coverage-200-250 millimeters. This option is perfect for the purpose of cultivating the Earth on the site, since it eliminates the large amplitude of the bastard of the bar during operation. In addition, this method allows you to reduce or completely abandon restrictions on the density of the beds.

Cultivator nozzle is in two versions:

Disk, whose cutting organs are a pair of cutting discs;
A gear, which is a number of milling on the shaft.

The fundamental difference is only in the design of the loose knot. Disk nozzles are more stringent, and therefore suitable for processing heavier soils, while the toothed ones have less their own weight, but are designed for work on lighter soil.

The slotted method of joining disks or cutting to the shaft allows the free movement of the cutting organs, which is ideal for cultivation, since it allows you to loosen the soil with a fairly wide capture (up to 200 250 mm per pass), without requiring a large amplitude of the rod movement. Restrictions on the density of the beds located on the site are also removed. With lengthening the beds of convenience of working with the nozzle under consideration, the turns will have to be done much less often.

Mounting methods and design

Modern nozzles-cultivators can be performed in two performance:

Despite different names and designs, by and large the fundamental difference is only in the form of a loose knot.

Rosted nozzles for a trimmer for grass differ in a smaller mass, and therefore are better suited for processing light soils. As for disk models, they are used to loosen more heavy soils, as they have greater stiffness.

The torque is transmitted to the nozzle-cultivator from the engine thanks to the shaft, which is combined by means of a special bar. The latter, unfortunately, often has to buy separately.

When processing long beds, the process of working with a nozzle and a trimmer becomes even more convenient, since in this case you will have to make turns much less often.

Nuances when working with a cultivator nozzle

It is important to emphasize that any kind of nozzle significantly increases the mass of the entire tool as a whole, and weight growth is often at least 5-6 kilograms. That is why prolonged work with a trimmer in this case becomes far from far from everyone! In a series with this, when choosing a nozzle, it is important to consider mechanical restrictions on the power of the device drive. For example, if you have chosen a model of a trimmer for grass with a engine of less than 1,500 watts, then when processing the soil, you will have to limit yourself only to hilling of potatoes and beds, since it will be possible to work only with regularly loosened land!

Since the drive bar has a considerable length, and the drive itself in trimmers operating on gasoline is usually placed behind the worker, then in the process of cultivation of the work they are accompanied by noticeable vibrations, the value of which can vary depending on the load on the cutters and wheels, as well as the length the bar itself. Through the shoulder belt, the vibration data are transmitted directly to the person’s hands, and therefore it is difficult to hold a considerable node and at the same time control the button of soil cultivation is difficult. Given this, it is important to emphasize that prolonged soil processing with a cultivator nozzle does not always remain safe for human health.

But there are advantages: so increased mobility of a hinged gasoline trimmer for grass with the absence of wheels makes it possible to easily work with soils on rows and beds without damage to already planted plants.

It is important to note that the cultivators “getting bad” with the cave-free soils, since when the first is the first to introduce into such a layer, the bar is sharply thrown back. Taking this into account, many manufacturers equip disc cultivators with special safety covers, so there is a more chance that the toothed mills are more likely to bother than break. However, in the latter case, at least a small protective panel for the legs will not be superfluous.

The presence of the safety screen significantly reduces the visibility of the employee!

Is it worth it to make a cultivator nozzle yourself?

The price factor has a noticeable effect on the choice: whether to purchase such a nozzle, or make it yourself. High-quality nozzles-cultivators for a trimmer for grass can be purchased at a price of 11,000 20,000, which justifies itself only with large volumes of work. It is inappropriate to buy such a node in cases where the processed soil is heavy (for example, chernozem or loam): the cultivator does not lift the soil, but only moves the lands from one place to another, moreover, along with the roots of torn weeds or grass.

The technology of vegetation care will also change: at first, a nozzle-knife should go along the beds, cutting off the grass, and only then use the cultivator nozzle.

Having made a decision on the independent manufacture of a cultivator nozzle to a trimmer, the following should first evaluate:

The design of the output section of the bar: if it is a flexible shaft, then you will have to forget about the cultivator: it will not withstand the amplitude of rotating moments. The cardan gear is more functional, and the most successful design is considered a multi.and.line rod, and a straight line, and not curved.
Drive power: if it is less than 1000 watts, then the engine will overheat, and cultivation performance will decrease sharply.
The volume of the fuel tank: energy consumption will increase significantly, since the cultivator nozzle will have to be made from improvised materials. Therefore, the tank should contain at least 1 liter of fuel.
The execution of the handle. Ergonomics experts believe that the most convenient is the T-shaped handle, which provides the most accurate and reliable direction. It is difficult to hold a gasoline trimmer for grass with a cultivator nozzle common in some models with a J-shaped handle.

If the existing trimmer for the grass satisfies the listed requirements, and its owner has sufficient experience in performing such work, then it is quite possible to make a disk nozzle with his own hands. As for the nozzles of the gear type, their independent manufacture is very time.consuming, and will not provide the desired quality.

Types and principle of work of cultivators

The principle of operation of the cultivator is simple: the element that loosen the ground begins to work after the mechanical part of the device is launched. Depending on the external size, engine power and performance, cultivators are divided into three types: light, medium and heavy equipment.

Light equipment is used in small areas with soft soil (flower beds, greenhouses).
Medium severity is used on clay soils.
Heavy equipment refers to universal equipment. It can be used for any soil.

Cultivators are of different types: disk, rotational, lap and milling. In terms of functioning, they can be: manual, with electric drive and working on gasoline, as well as trailed, hinged, process one or more rows. When processing a land plot, everyone chooses the model you need. Hand cultivators are good in that they can be made independently with minimal cash costs.

Advantages and disadvantages

Each cultivator, regardless of whether it is manual or electric, has its pros and cons of.

Manual cultivator. Easy to use and much more conveniently shovels, compact. Does not load the lower back. The soil loosens well, does not melt the roots throughout the site. But this technique will not cope with the unlucky land, as it has low performance. It is better to use it in small areas, such as flower beds or greenhouses.
Electric cultivator. Light and compact equipment working from the network. Simple in maintenance. The lack of equipment is an electric cord. It can interfere during operation, and due to its length there is a limitation in the processed area. Has low power and small soil processing depth. Not intended for hinged equipment.
Gasoline cultivator. Thanks to hinging equipment, it has many functions. Does not connect to electricity, so it can move throughout the site. Suitable for processing small territories. Weighs much more electrical equipment. It is difficult to care for it, and fuel is required for refueling.

Other options for self.proceeds

Thanks to an economical and reliable engine, a trimmer for grass is the basis for many other homemade. Below we will briefly describe the possible options and give video instructions for their implementation.

Alteration of a trimmer for grass in a chainsaw

A chainsaw can also be obtained from gasoline motorcycles. For the implementation of the rationalization idea, old models of devices will be needed in life. All details will be taken from them. The result is presented below the result.

Alteration of a trimmer for grass in a gasoline saw is to install this part with a motorcycle with a motorcycle engine instead of its own engine.

Making a snowmobile for children

Trimmer for grass can also be converted into a snowmobile. The process consists in installing an engine on a design equipped with skiing. Due to the insufficient power of the engines available on motorcycles, the created independent technique is capable of transporting only relatively small weight. It also moves in relatively flat terrain. Such a homemade will serve as an interesting and useful toy for children.

The movement of the snowmobile is carried out using a screw or chain transmission.

The videos below show some possible options for home.made technology:

Homemade craftsmen came up with many different ways to adapt the motor from a trimmer for grass on a snowmobile. Here, restrictions are related to personal imagination and the existing list of unnecessary devices and techniques that can be used to create homemade snowmobiles.

Motoburg

Motokos can be converted into a motorbike, which will also be used as an ice discovery if necessary. As a result, construction work will accelerate and require less labor costs. Motobur make recesses for pillars of fences, the foundation from piles and to erect other structures.

Both electric and gasoline trimmers for grass are remade for this purpose.

Additional nozzles

In addition to the cultivator nozzle in stores, there are many other devices that are mounted on a trimmer for grass, these include:

Drill. When installing on a gasoline trimmer for grass, you can work without electricity.
Bitch. Works on the principle of hacksaw.
Gardening scissors. With their help, it is easy to cut bushes, trees and put in order a hedge.
Aerator. Destroys the crust on the surface of the lawn.
Altitude. Using this nozzle, you can remove branches at an altitude of up to 4 meters.
Snowman. Designed to remove snow from garden paths and sites.

The disadvantage of all these useful nozzles will be their high price. Also, when equipped with any nozzle, the weight of a trimmer for grass will increase by 5-6 kg, not everyone can work as a tool.

To make it easier for yourself in the garden, you need to purchase several different nozzles for a trimmer for grass. If the budget is limited, then the devices for motorcycles can be done independently.

Sources:

https://kursi-floristiki.ru/yagody/prisposoblenie-dlya-trimmera-svoimi-rukami.html
https://titan-spec.ru/instrumenty-i-stanki/kultivator-iz-trimmera.html
https://nzmetallspb.ru/stanki/nasadka-kultivator-dlya-benzokosy-svoimi-rukami.html
https://nzmetallspb.ru/tehnologii/nasadka-kultivator-na-motokosu-svoimi-rukami.html
https://tractoramtz.ru/kultivatory/nasadka-kultivator-na-motokosu-svoimi-rukami.html
https://msmetall.ru/instrumenty-i-stanki/kultivator-dlya-trimmera-svoimi-rukami.html
https://prostrouky.ru/instrumenty-i-oborudovanie/nasadki-dlya-trimmera-chto-luchshe-kupit-ili-sdelat-svoimi-rukami.html
https://titan-spec.ru/instrumenty-i-stanki/nasadka-na-trimmer.html
https://pressadv.ru/samodelkinu/samodelnye-nasadki-na-trimmer.html