Alteration of clutch on the Kutaisi motor block super. Engine selection for motive block…

The Unoa Tractor Kutaisi. characteristics, attachments, reviews

This indicates a malfunction of the carburetor (it is necessary to configure the node, hand over to the service workshop, or disassemble it and repair it yourself).

The engine overheats greatly when working:

• malfunctions of the carburetor. it clogged or worn out the gasket on the connection with the carder (clean the device from dirt or replace the gasket);
• The fuel filter was clogged (it must be dismantled and cleaned, or replaced with a new one);
• The engine bearing has broken (here, most likely, the help of a professional repair master will be required).

Pneumatic fires (soils) or cutters do not rotate:

• The clutch cable was weakened or damaged (it is necessary to adjust it or replace it with a new one);
• fasteners weakened (tighten them with a suitable key);
• The cutters clogged with dense soil Комментарии и мнения владельцев or the mechanism jammed the stone (inspect and clean the equipment).

Have you used the Kutaisi motornote? Is he in a working state now?

Description

This technique is from the USSR. The first models of Kutaisi motor blocks left the assembly line in the 80s of the last century. Based on the name, it is clear that they gathered in the Georgian city of the same name. The development of this machine was engaged in AKME (Italy), which has already had experience in the production of small garden equipment (Goldoni).

Georgian engineers simply modernized the ignition system and the clutch principle, thereby adding the prefix “Super”.

This unoic tractor is tested by time, and this is the hardest quality criterion. If the machine is presented on the market for more than 30 years, and is still in demand, then this is a vivid confirmation of the reliability of the design of the device.

Now there are a large number of used models of the Kutaisi motornote, which are cheap enough. But there are problems with the documentation that is problematic to find. Now on the Internet there are a large number of forums with a detailed description and operation rules.

The Georgian plant produced a whole line of its walk.behind shoes: 608, 610 and 612. But only 610 model became truly popular. Let’s look at it in more detail.

Peculiarities

Kutaisi motor blocks began to be produced at the machine.building plant of the Georgian city of the same name and were produced under the license of the Italian company Akme. This enterprise was well known all over the world and was engaged in the production of Goldoni garden and small agricultural technology.

After the production capacities of the plant in Georgia, local experts finalized the one.axle tractor and adapted it to difficult natural conditions inherent in most of the country. In particular, the engine ignition system was changed, the camshaft was improved and the clutch was finalized, after which the prefix “Super” was added to the name of the brand. Engineers developed a whole line of units represented by the Kutaisi Super models of modifications 600, 608, 610 and 612. However, the most perfect of all listed was the tenth model, which incorporated the best characteristics of both the Italian prototype itself and its modifications.

The scope of use of the Kutaisi Super 610 motornote is quite wide.

With its help, many agrotechnical measures can be carried out:

• plowing land;
• sowing cereals;
• harvest and snow cleaning;
• loosening;
• watering;
• transportation of goods;
• hilling;
• The mowing of the grass.

The unit can be used at temperatures from.20 to 35 degrees, which allows us to operate not only in warm times, but also in winter. Thanks to powerful rubber wheels with a deep tread, the same-based tractor is distinguished by high patency, which is why it is able to work on any type of soil. A special design and the presence of a worm reducer allow the unit to withstand any loads and move quickly enough. The advantages of motoblocks of this brand are the high reliability of the engine, transmission and chassis, strong frame and complete compatibility with all types of attachments. The pluses also include low cost and simplicity of design. In addition, the device was produced in accordance with the state standard and established itself as one of the most reliable means of small mechanization. The disadvantages include the low availability of many spare parts and the difficulty to find the operating instructions.

Specifications

The Kutaisi Unoa tractor is considered almost reliable equipment and with timely maintenance is able to work for a very long time. High operational characteristics of the equipment are due to a combination of three powerful and reliable systems: engine, transmission and chassis.

• Engine. The Kutaisi Super 610 unit is equipped with an ALN-330 gasoline four-stroke engine, 327 cm3 and a capacity of 5.4 liters. With. In equivalent, this is 4.8 kW, which is a good enough indicator for the technique of this class. The engine has an air cooling system, which is why it is recommended to take regular breaks when working in hot times and let the motor cool. Otherwise, the equipment will work for wear and quickly fail. The engine is performed using a hand starter.
• Transmission. A gearbox that has three front and one rear gear is installed on a one.axle tractor. This favorably distinguishes “kutaisi” from most analogues with only 3 speeds. 2 front and rear. The maximum speed of the motoblock movement is 10 km/h, which allows you to use the unit as a full.fledged small.class tractor for transporting various agricultural goods weighing up to 0.5 tons. Gear shift, as well as turning on the reverse using the lever system.
• The chassis is represented by a powerful steel frame that can withstand heavy loads and adapted for all types of additional equipment. The uniform tractor is equipped with high wide.profile wheels of 4×10 size, which provide the ability to work on complex soils and prevent the car with bogging or steer in the ground. Special chain rims with the plates located on them are installed as soil.bends on the native wheels of the unit. Thanks to such devices, there is no need for a complete replacement of native wheels with metal, which greatly simplifies work with the walk.behind tractor.

The unit has a dependent type of drive and bar control, which allows adjusting up to 180 degrees in vertical and horizontal planes. The capacity of the working tank of the walk.behind tractor is 0.75 liters, the capture width during soil processing varies from 56 to 61 cm, and the weight is 105 kg. The power of power selection has lever control, which allows you to attach any attachments to the unit. A powerful plate of cast iron, weighing 20 kg and located under the engine block, acts as a weighting agent.

Non.mounted equipment

Kutaisi units are multifunctional agricultural devices, with a huge spectrum of work performed. All additional options are possible with the participation of the following attachments developed by the Kutaisis machine.building plant:

Frases. A device designed for loosening the soil. Cutters are Sable.shaped and “goose legs”. The number of knives on one milling cutter can vary from 3 to 4. For Kutaisi, saber-shaped M-shaped mills 21m were originally used.

User manual

The configuration of any walk.behind tractor always includes operating instructions, Kutaisi is no exception. This documentation is designed to familiarize the owner of the walk.behind tractor with the following important information:

• The device of a motorized unit.
• Technical characteristics of the walk.behind tractor.
• Safety requirements for the operation and maintenance of the unit.
• Carrying out the first launch of the walk.behind tractor, proper run.in the device.
• Maintenance.
• A list of problems indicating their causes and methods of elimination.

The operating instructions contain detailed schemes and drawings with descriptions indicating the location and appearance of all components and mechanisms present in the walk.behind tractor. The assembly sequence of assembly is also described, which allows you to assemble a single tractor even to a beginner.

In the “Security Requirements” section, you will learn to work safely with the device, taking into account all the rotating elements, high.voltage wires, easily igniting liquids. Knowing all this, you will protect yourself and your loved ones, which may be nearby during field work.

First start

The procedure for conducting the first launch is stimulated in the instructions. Particular attention should be paid to these moments:

• pour oil into the engine crankcase to the desired mark;
• pour high-quality fuel into the fuel tank (AI-92);
• Check the reliability of all fasteners.

Throughout the lockering of the walk.behind tractor, all parts and elements of the engine occurs, which further provides a high motorcycle engine for a motor block.

From the moment of the first start of the engine, the process of running a walk.behind tractor begins, the duration of which is 25 hours.

During the period of the running.in, it is forbidden to use the unit for all power, for this period, the sparing regime of the half.sales of the unit is permissible for this period. At the end of the run.in period, it is necessary to replace the oil in the crankcase.

Maintenance

• Daily care for the device.
• Monthly check.
• Test check and service in the service center.
• Conservation for the winter period.

The daily duties of the owner of the walk.behind tractor that ensure the serviceable service of the unit.

• check the fuel level, add gasoline if necessary;
• check the amount of oil in the crankcase, add to the required level;
• Checking and lifting bolts.

At the end of agricultural work, perform the following actions:

• clean the unoic tractor from pollution (wash);
• dry;
• Lubricate the rubbing parts of the unit with the necessary lubricants
• Cover and store in a dry place.

We follow and change the oil in the crankcase in time. The first replacement (not counting the period of running) is performed after 50 hours of operation of the unit. Subsequently, the oil change procedure will have to be carried out every 100 hours of work of the walk.behind tractor.

The main malfunctions and methods of elimination

We list the most common problems characteristic of the Kutaisi motornote.

• There is no fuel. check its presence in the tank, check the condition of the hoses, carburetor, air filter;
• low.quality gasoline. drain it and pour a new one;
• There is no contact on the spark plug. if you burned to replace, smoked. clean, adjust the gap;
• The magnetic system is faulty. check the magneto, the condition of the high.voltage wire, if necessary, adjust or replace.

• The carburetor is faulty or not adjusted, it is necessary to adjust, if it does not help, take it to the service center.

• The fuel filter was clogged. cleaning or replacement;
• The carburetor was clogged. cleaning;
• The bearing. Service Center failed:
• It requires replacing the gasket between the carburetor and the card.

Instructions for the USSR Motoboblok “Kutaisi” “Super.610 ”:

Review of the lineup

The Georgian Machine.Building Plant produced a series of modifications of the Kutaisi motoblocks:

However, the most popular motoblock model is Kutaisi Super-610.

Kutaisi Super-610

This unit is intended for all types of agricultural work with the participation of various attachments. With it, you can not only plow and cultivate, but also plant, hill, harrow, dig, water, transport goods, mow grass, remove snow and much more.

The unit has proven itself perfectly on clay, loamy, sandy soils and chernozem.

It copes with the treatment of virgin lands. The same.based tractor is prepared for various climatic conditions, neither atmospheric precipitation nor temperature changes are terrible for it.

The gasoline four.stroke power plant Aln 330 with the lower valves has a capacity of 5.44 horsepower (4.8 kW). Forced air protection protects the motor from overheating, although the instruction recommends, after every 2-3 hours of operation on the walk-behind tractor, make short stops for 20-30 minutes, which will allow the engine to cool.

Kutaisi modern motoblocks are increasingly equipped with 6.5 liter Honda engines.With.

The engine is launched from a reverse hand starter.Ideal fuel for the ALN 330 engine-AI-92 gasoline. The operational mass of the walk.behind tractor is 105 kg, for the best submersible effect, there is ballast (additional load or weighting agents). two cast iron disks for 2 kg wheels and a powerful cast iron plate under the engine weighing 20 kg. All details are quickly removable.

The kit includes pneumatic wheels with a wide agricultural protector that increases the cross.scale of the walk.behind engineer.

The depth of cultivation with cutters (4 pcs in the set of saber.shaped) reaches about 12 cm. For ease of work, there is an additional transport wheel.

Four.speed transmission, there are three front speeds and the back gear. Control control is adjustable in two planes (vertical and horizontal up to 180 degrees). There is a shaft of selection on lever control, which allows to attach any attachments to the walk.behind tractor. The package includes universal hitch, milling cutters, soil.bearing, trailer and wheels.

Characteristics

Review of attached equipment

Cutters

Kutaisi’s uno.based tractor comes complete with 4 cutters of saber.shaped, which are able to process the soil in a width of 1 m and at a depth of 12 cm.

The cultivation of soil is carried out with the aim of enriching it with oxygen, giving uniformity and loosening.

This attachment equipment is used in situations where soil milling does not help due to the hardness of the breed. The plow allows even the virgin lands to cultivate. Mills in such situations will simply jump the soil and will not be able to plunge into the ground.

If we compare the plow and mills, the former have much less capture width and they have to work longer, but the one.axic tractor Kutaisi 610 will behave much more stable.

Braids

Kutaisi motoblocks will help their owners in cleaning the territory and maintaining it in order with the help of mowers.

These devices support the work with both rotary and segmented options for this attachment equipment.

Rotary mowers allow cleaning rough grass and small shrubs. Segment options are used if necessary to cut medium.sized shrubs and young shoots of plants.

Potato.cutter, potato.aditch and cun

Automation of work with potatoes occurs using potato.coats and potatoes. They allow you to sow and collect cultures.

The hip is used to care for potatoes during its maturation.

Snowman and dumplings

Motoblocks of the Kutaisi brand will help in snow cleaning with snowpocking equipment: snowbrushes and dumps-lobes.

Wheels, soil.bearing and caterpillars

High.quality tires are installed on Kutaisi motor blocks that can provide patency during work.

If necessary, you can install soil.spaces on top of the tires, thereby providing additional adhesion to the surface.

When working or moving in a swampy area, the Kutaisi motornote can be installed, which improve adhesion by increasing the clutch area with the surface.

Tears

The mass of the Kutaisi motor unit super is 105 kg. If the weight of the device is not enough, then two weights of 15 kg are included in the delivery kit, and cast.iron engine protection from below 20 kg, which can easily be removed.

Trailer

Kutaisi brand motoblocks can transport goods using trailers. The choice of their configuration should depend on the cargo that will be transported:

• Self.sewing (used in the transportation of bulk cargo);
• With high sides (used for transportation of volumetric goods);
• Long trolleys (carry logs of trees and pipes).

Adapter

This trolley is a rigid frame with a seat that allows you to control a machine from a sedentary position.

Overview of the work of the Kutaisi motornote with a Schnek snowman

Overview of the work of the Kutaisi motornote with a rotary lawn mower

Vasily, 33 years:

“I found“ miracle technology ”in the barn with his grandfather, as I understand it, after the examination, the same tractor has not been used for more than 10 years. Nearby lay soil.spaces, mills, coupling and even trailer. Curiosity and excitement took their own and after a month and a half of recovery work, the same.based tractor earned. I, of course, replaced the engine, put Honda. I went through, cleaned where I needed to grind, wrapped it. no one in the district has such an assistant, so that, that he went the thirtieth dozen!?””

Peter, 41 years old:

“I deliberately searched precisely Kutaisi Super 610. I remember him since childhood. my father went like that. Reliable, unpretentious, productive, withstanding both snow and rain and snowstorm. I bought two at once, in order to restore one. There was a lot of work, but the result was satisfied. And plows and sow, waters, with potatoes generally helps out. they forgot about “related” diseases. The engine also changed. so there will be fewer problems in maintenance, Honda is easier to maintain, there are spare parts, there is fuel, all oils “

Alexander, 39 years:

“My father has such a single tractor in the village for the 20th year, probably. His father periodically repairs him, but the breakdowns are frivolous (pulley, candle, carburetor bulkhead). A very strong one.axle tractor, takes any soil, moves forward confidently. Father is advised to change the engine, but while he is resisting, he rides to Aln30. There are almost all the canopies-both a mower, and a pump, a snowman (manually made), all diggers-sagging. A plot of 32 acres is served without problems. Great unoic tractor, if you get. take it, you will not regret.””

The Unoa Tractor Kutaisi

Goldoni Jolly Junior 44, Meccanica Benassi, Goldoni, Lombardin of their domestic clones Kutaisi 610, Neva Super.

Dmitry Sedov recording is fixed

I am preparing for the snow winter! The same.based tractor has not yet been assembled and the dump is already ready. What do you think the mount will withstand on a walk.behind tractor?

Sergey Alekseev recording is fixed

Sergey Alekseev

Alexander Panshin recording is fixed

Hello. Selling an engine from Kutaisi is a worker, dear, spare parts for it. There is also a cultivator. The price is contractual.

Ruslan Minosyan Record is fixed

Selling everything in the photo.A braid for grass on the bolts, the corps Kozet Buck Goldonnikppe, the Corpolarb, assembled, the steering wheel with mounts in the kit is completely ordered. Shipwater checkpoint pair of wheels with hubs and diploma of the gearbox cover Turnpile forking the transmitter of the goldoniesheld on trifles.

Review of the motor block Kutaisi Super 610

The operation manual for the device explains that this motor cultivator is a universal mechanism that carries out any kind of agricultural work. Included with the device, hinged equipment of various types is sold, which allows you to use the unit for:

With the help of a segment mower, a motor.cultivator can mow grass. If you attach the trailer to the device, then it will be able to transport goods. Wheels, if necessary, can be changed to more powerful ones, which will provide excellent passage of the unit in any type of soil.

The cultivator is adapted to any loads thanks to the worm gearbox and the special design of the mechanism. When plowing the earth, the cultivator can move very quickly.

In order to stop the cultivator, an adhesion lever is provided, which must be brought to a non.working position. When hilling potatoes, when the cultivator reaches the end of the bed, by means of a lever, you can perform the turning over the mechanism by 180º, and the unit will move in the opposite direction.

Kutaisi Super 610 is a device with a large number of additional functions. Having fixed the appropriate nozzles, it can be adapted to clean the site from snow, trim the bushes, leveling the earth after digging.

Preventive work and bringing the machine to working condition are only in the correct centering of parts.

Technical characteristics of the motor cultivator Kutaisi Super 610:

• Type of transport: Unoic tractor Kutaisi Super, model 610.
• Fuel consumption 6.5 l/s.
• The rear and front checks are installed.
• cylindrical crankshaft, steel fuel tank.
• The unit is equipped with hinged equipment: a plow, a mill and a trailer.
• The price is 60,000

Previously, a engine was installed as a engine for this uno.based tractor. Currently, there has been a replacement of the engine for the Kaluga.made engine, which has:

• improved output shaft;
• steel fuel tank;
• standard muffler;
• elongated cylindrical crankshaft with a pulley.

The back cover is equipped with a ring that makes it possible to install an adapter in the center. The landing holes of the Alt motor and other structures differ, so an additional transition plate was made, which is mounted between the gearbox and the engine in addition to the already installed.

The engine shaft for the Kutaisi walk.behind motorist has an oblong shape, so 2 flanges were installed and a pipe section was welded between them. The unit has improved clutch. Iron pulley is installed on the engine shaft. A clutch card is attached to this pulley using the washer.

Consider the layout of the engine and its nodes on the example of the motor compartment of the Kutaisi Super 610 unit with the Aln-330U carburetor engine ACME.

The air for cooling the cylinder flows through the air intake and is supplied with a fan-butter recorded at the front end of the elongated crankshaft and a covered casing. The rear end of the shaft is connected to the aggregate transmission. In the lower region there is a safety fence, at the same time.

On the right side of the engine is the Magneto breaker, a horizontal type carburetor and an air filter, in which a filter component is a mesh of kapron. The muffler is mounted behind the air filter. The engine is covered with a hood, under it is a fuel tank. The fuel line coming from the tank to the carburetor is equipped with a crane.

Non.mounted equipment

Kutaisi units are multifunctional agricultural devices, with a huge spectrum of work performed. All additional options are possible with the participation of the following attachments developed by the Kutaisis machine.building plant:

Frases. A device designed for loosening the soil. Cutters are Sable.shaped and “goose legs”. The number of knives on one milling cutter can vary from 3 to 4. For Kutaisi, saber-shaped M-shaped mills 21m were originally used.

User manual

The configuration of any walk.behind tractor always includes operating instructions, Kutaisi is no exception. This documentation is designed to familiarize the owner of the walk.behind tractor with the following important information:

• The device of a motorized unit.
• Technical characteristics of the walk.behind tractor.
• Safety requirements for the operation and maintenance of the unit.
• Carrying out the first launch of the walk.behind tractor, proper run.in the device.
• Maintenance.
• A list of problems indicating their causes and methods of elimination.

The operating instructions contain detailed schemes and drawings with descriptions indicating the location and appearance of all components and mechanisms present in the walk.behind tractor. The assembly sequence of assembly is also described, which allows you to assemble a single tractor even to a beginner.

In the “Security Requirements” section, you will learn to work safely with the device, taking into account all the rotating elements, high.voltage wires, easily igniting liquids. Knowing all this, you will protect yourself and your loved ones, which may be nearby during field work.

First start

The procedure for conducting the first launch is stimulated in the instructions. Particular attention should be paid to these moments:

• pour oil into the engine crankcase to the desired mark;
• pour high-quality fuel into the fuel tank (AI-92);
• Check the reliability of all fasteners.

Throughout the lockering of the walk.behind tractor, all parts and elements of the engine occurs, which further provides a high motorcycle engine for a motor block.

From the moment of the first start of the engine, the process of running a walk.behind tractor begins, the duration of which is 25 hours.

During the period of the running.in, it is forbidden to use the unit for all power, for this period, the sparing regime of the half.sales of the unit is permissible for this period. At the end of the run.in period, it is necessary to replace the oil in the crankcase.

Maintenance

• Daily care for the device.
• Monthly check.
• Test check and service in the service center.
• Conservation for the winter period.

The daily duties of the owner of the walk.behind tractor that ensure the serviceable service of the unit.

• check the fuel level, add gasoline if necessary;
• check the amount of oil in the crankcase, add to the required level;
• Checking and lifting bolts.

At the end of agricultural work, perform the following actions:

• clean the unoic tractor from pollution (wash);
• dry;
• Lubricate the rubbing parts of the unit with the necessary lubricants
• Cover and store in a dry place.

We follow and change the oil in the crankcase in time. The first replacement (not counting the period of running) is performed after 50 hours of operation of the unit. Subsequently, the oil change procedure will have to be carried out every 100 hours of work of the walk.behind tractor.

The main malfunctions and methods of elimination

We list the most common problems characteristic of the Kutaisi motornote.

• There is no fuel. check its presence in the tank, check the condition of the hoses, carburetor, air filter;
• low.quality gasoline. drain it and pour a new one;
• There is no contact on the spark plug. if you burned to replace, smoked. clean, adjust the gap;
• The magnetic system is faulty. check the magneto, the condition of the high.voltage wire, if necessary, adjust or replace.

• The carburetor is faulty or not adjusted, it is necessary to adjust, if it does not help, take it to the service center.

• The fuel filter was clogged. cleaning or replacement;
• The carburetor was clogged. cleaning;
• The bearing. Service Center failed:
• It requires replacing the gasket between the carburetor and the card.

Instructions for the USSR Motoboblok “Kutaisi” “Super.610 ”:

Service

Before starting the unit for the first time, it is necessary to properly prepare it. To do this, you should familiarize yourself with the device diagram, read the operating instructions, check the oil level and pour fuel into the gas tank. Then the engine is launched and left to work at low speed for 8 hours. After the specified period, the motor is jammed, let it cool and drain the engine oil. After which they fill a new portion, start the engine and start work.

In the engine, the oil is changed every 25 hours of operation, and in the transmission. every 100 hours. For the engine, it is recommended to use any oil for small agricultural equipment with 4T marking, while for gearboxes it is better to use the TAP-15V brand. The lever gearbox mechanism must also be regularly lubricated using waterproof lithium lubricant.

Kutaisi units are characterized by good maintainability. And if the repair of an electronic interrupter or switch cannot be performed independently, then it is quite possible to eliminate the simplest mechanical malfunctions. So, if the aggregate motor constantly stalls, then the following manipulations must be performed:

• check the level of fuel and oil (if necessary. add);
• check the spark plugs for a bunk (if necessary, replace them);
• see if the spark passes from terminals to the spark plug;
• carry out check of fuel and air filters (if necessary, perform their replacement);
• adjust the saturation of the fuel mixture in the carburetor.

When vibration appears, you need to check all the bolted compounds, aggregation of hinged parts and the quality of the fuel for water in it. If, after all the measures taken, the engine still continues to stall or vibrate, then you should contact the service center.

About how to repair the Kutaisi motorbells, watch in the next video.

Kutaisi Unoa Tractor Super 610

Good day. Tell me, please, maybe someone has a casing from the gearbox and the half?

Hello everyone help you figure out how a moss selection shaft works on Kutaisi.Only from the wheels.

I will report a little for the work done on installing a Honda clone named Champion with a capacity of 9 liters.With. So far made: Planeshab and the lower part of the clutch.For a general performance

Yes, and the most interesting thing is preparing to install a diesel engine with an electric steamer and lighting generator on the MB.

Everyone, welcome, on the forum, someone from an old-timer (acetone, Afanasyich?) Already made an adapter on the cutter, guys tell me the number of the post with the drawings and what to take from (technology process), otherwise the GZ did it, we need to adapt the milling mill for them and someone else did it and tried the hedges for Kutais to fight the weed (not potatoes pulls out?)-I will be grateful for the advice (schemes, drawing) for adaptation to combat weeds (what and how best to weed out), otherwise you pass a row with cultivator paws, then you are spilling over, and the result is still sampled, then from under the mounds where the potato in a row is climbing.

Acetone wrote: Yes, and the most interesting thing is preparing to install a diesel engine with an electric steamer and lighting generator on the MB.

Acetone. This diesel will hang obliquely on the adapter or there will be some more additional support from below?

Anatoliy.54. It is planned to fix the lower load, it will be added. support.Well, the planhab itself is attached to the motor 6 bolts

Vladimir B. And for what and what adapter?

The adapter from Voma to the cutter at an angle, there it seems that the cardanchik was used from the vase

Vladimir B. Wrote: an adapter from Voma to a cutter at an angle, there it seems that the cardanchik was used from the vase

I didn’t redo anything and do not think, the Dvig 330, the native from 88g, to pour oil to the transfusion from the cork, put the wheel on the brick and fill the oil into the engine.The only thing I changed in the engine, Duc is the piston rings, put purely living rooms for one season, then put it from constipation, have been going on for seven years now.

I found, from 54 pages, Dmitry T and the techie made, I will “smoke” the forum, I wonder how this adapter has proven himself in work? And I also asked. “”. I would be grateful for the advice (schemes, drawing) for adaptation to combat weeds (what and how best to weed), otherwise you pass a row with cultivator paws, then you hill, and the result is still sampled, then from under the mounds where potatoes are potatoes. Sorrow climbs in a row “

Tell me spare parts on Kutaisi 610 can be ordered? And on the cutter.

Bremus. there the shaft works separately, but when switching the speed is turned off.

I looked at the people are interested in clutch. Below links to different types of clutch. The latest can be used as a sleeve if remade under the Ufa clutch from Agro. The most budget option.

Vladimir B. wrote: I wonder how this adapter in his work has proven himself?

So far, twelve seasons of three summer cottages. Hinge is more lively of all living things. Nothing broke, did not fall off and did not fall out. Only once one cutter of cutter shifted when hitting a stump. I unscrewed the bolts, corrected and forgot.

Vladimir B. wrote: I found it, from 54 pages, Dmitry T and the techie made, I will “smoke” the forum, I wonder how this adapter has proven himself in work? And I also asked. “”. I would be grateful for the advice (schemes, drawing) for adaptation to combat weeds (what and how best to weed), otherwise you pass a row with cultivator paws, then you hill, and the result is still sampled, then from under the mounds where potatoes are potatoes. Sorrow climbs in a row “

Vladimir B the adapter works well, there are no complaints.I did not make drawings.But I am weeding with such a cunning, the earth is turning over, the roots up and dry.Such a body is made from the disk of the seeder.Good luck.

Technician. Dmitry T, guys thank you for answering if there is.n. Tips for the manufacture of an adapter (cardan, angles, distances, etc.), please write, I pass between the rows with cultivator paws, I am more interested in the weed in rows of mounds where the potatoes, I read on the Internet (on the forums) someone praises hedgehogs, and someone says that they pull out and injure the potato, m.b. Someone has experience (it is different) by their use or your effective method of weed combat. share?

TZ-4K-14. Very useful information, thanks. Well, I finished everything, tested everything, the championship works and leaves for the new owner, or rather to his owner.what can I say, the tenth mm decides everything. Photo for the report: